ACS Nano
·
2021
·
IF 15.881
Caiyue Wen,Xiao Li,Ruixuan Zhang,Chunyang Xu,Wenbin You,Zhengwang Liu,Biao Zhao,Renchao Che
Two-dimensional materials, especially the newly emerging MXene, have attracted numerous interests in the fields of energy conversion/storage and electromagnetic shielding/absorption. However, the inherently inevitable aggregation and absence of magnetic loss of MXene considerably limit its electromagnetic absorption application. The introduction of magnetic component and favorable structural engineering are the alternatives to improve the microwave absorption (MA) performance. Herein, we report a spheroidization strategy to assemble double-shell MXene@Ni microspheres, where the commonly lamellar MXene are reshaped into three-dimensional microspheres that provide the substrate for oriented growth of Ni nanospikes. Whereas this structural feature offers massive accessible active surfaces that effectively promote the dielectric loss ability, the introduction of magnetic Ni nanospikes enables the additional magnetic loss capacity. Benefiting from these merits, the synthesized 3D MXene@Ni microspheres exhibit superior MA performance with the minimum reflection loss value of −59.6 dB at an ultrathin thickness (∼1.5 mm) and effective absorption bandwidth of 4.48 GHz. Moreover, the electron holography results reveal that the high-density anisotropy magnetism plays an important role in the improvement of MA performance, which provides an insight for the design of MXene-based materials as high-efficient microwave absorbers.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Surfaces and Interfaces
·
2023
·
IF 6.2
Caiqin Wang,Tingting Zhou,Cheng Qian,Lili Chen,Liyuan Hao,Shumeng Fu,Bingguo Feng,Xiaofei Yang
Ti 3 C 2 T x MXene nanonets (MNNs) with 3D fibrous architecture were obtained from Ti 3 C 2 T x MXene nanoplates (MNPs) via surface modifying of alkalization in concentrated KOH solution, which was further combined with carbon nanotube and used as catalyst supports for Pt nanoparticles. By controlling the treatment time of alkalization, the lamellar surface of MNPs was getting into fibration in different extent. The catalytic performances toward hydrogen evolution reaction (HER) of a series of Pt-loaded MNNs catalysts were investigated, in which 1 %Pt-MNNs-9 composite catalyst presented the best hydrogen evolution performance. In detail, 1 %Pt-MNNs-9 with 1 wt.% of Pt loading exhibits an overpotential of 60 mV at 10 mA·cm −2 , which is much lower than 1 % Pt-MNPs (274 mV). It also keeps stable performance for long term stability. The enhanced catalytic activity is probably due to the fact that, Ti 3 C 2 T x MNNs with 3D architecture not only possesses abundant sites to anchor Pt nanoaprticles, but also facilitates the mass and charge transfer, which are significantly beneficial to catalytic reaction. The 3D architecture MXene fibers are expected to have widespread applications including but not limited to energy storage/conversion, and catalytic fields.
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
·
2020
·
IF 6.444
Qianfan Zhou,Kunpeng Qian,Jianhui Fang,Miao Miao,Shaomei Cao,Xin Feng
With the mushrooming of smart electronic devices, ultrathin Ti 3 C 2 T x MXene based EMI shielding materials with long term durability have aroused much interest. Herein, 2D Ti 3 C 2 T x /g-C 3 N 4 heterojunction films were firstly assembled using cellulose nanofibrils (CNF) as green binder via a solution-based pressured-filtration process. The heterojunction film with Ti 3 C 2 T x /g-C 3 N 4 mass ratio of 5:1 (28.20 µm in thick) exhibited distinguished performance with EMI shielding effectiveness of 42.99 dB in X-band and high tensile strength of 23.85 MPa. Specially, the generation of photo-electrons from g-C 3 N 4 nanosheets reduced TiO 2 into lower valence states under 365 nm UV light-irritation, resulting in lower loss on electrical conductivity as well as EMI shielding performance compared to their unilluminated counterparts. The reduction on TiO 2 offered by the g-C 3 N 4 enables the heterojunction film to be considered as a promising alternative EMI shielding material for future potential applications, because it can run long time just need UV light modulation.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2021
·
IF 9.229
Hui Zhi,Xiaobo Zhang,Fengya Wang,Peng Wan,Liang Feng
Flexible pressure sensors made of carbon materials have been used in electronic skins (e-skins), whose performance can be enhanced if composite sensing materials are used. Herein, an MXene/polyaniline/bacterial cellulose (MXene/PANI/BC) aerogel sensor has been fabricated through the self-assembly process between the MXene and one-dimensional active material. Combined with fewer-layer or single-layer MXenes, the as-fabricated aerogel could be used as the active layer of the pressure sensor, monitoring tiny motion signals of finger bending, wrist bending, and pulse beating. Bluetooth wireless transmission could also be realized to monitor the real-time spatial pressure distributions on the mobile phone, making the aerogel-based sensor an ideal candidate in e-skins. Meanwhile, the aerogel-based sensor is sensitive toward NH3 due to the unique three-dimensional (3D) structure of the aerogel and the abundant terminal groups (such as −O, −OH, and −F) of the MXene in the system that ensure efficient electronic transfer for the sensing process and create active sites for the absorption with the target gas. This work offers a versatile platform to develop MXenes to fabricate 3D composite aerogels for high-performance flexible multiple sensors.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Surfaces and Interfaces
·
2024
·
IF 5.7
Yanling Jin,Jiahui Geng,Yilan Wang,Zirui Zhao,Zhengyan Chen,Zhengzheng Guo,Lu Pei,Fang Ren,Zhenfeng Sun,Peng-Gang Ren
As the emerging 2D materials, MXenes have been regarded as promising electrode materials in supercapacitor as power supply for wearable and portable electronic devices due to their metallic conductivity, hydrophilic feature, abundant functional groups, and large theoretical specific surface area etc. The capacity and rate capability of MXene-based electrodes is limited by the sheet restacking, hindering their further development. Herein, Ti 3 C 2 T x MXene/graphene/carbon nanotubes (MXene/graphene/CNTs) flexible film was successfully fabricated by vacuum assisted filtration. Intercalation and confinement of graphene and carbon nanotubes between the Ti 3 C 2 T x MXene nanosheets could increase the spacing and specific surface area, alleviate the stacking of MXene nanosheets, thus enhancing the electrochemical properties. The prepared MXene/graphene/CNTs film possesses increased specific surface area, average pore size, pore volume (112.259 m 2 g −1 , 9.982 nm, 0.276 cm 3 g −1 ), compared to MXene (93.088 m 2 g −1 , 3.786 nm, 0.088 cm 3 g −1 ). Consequently, MXene/graphene/CNTs delivers high area specific capacitance of 1862.5 mF cm −2 at 1 mA cm −2 and excellent rate capability (1525 mF cm −2 , 81.88 % at 20 mA cm −2 ). Flexible asymmetric supercapacitor constructed with MXene/graphene/CNTs film and active carbon as positive and negative electrodes, and PVA/H 2 SO 4 gel as solid electrolyte, achieves an energy density of 133.75 μWh cm −2 at the power density of 750 μW cm −2 . In addition, there is still 94.9 % of the initial performance after cycling 8000 charge/discharge cycles at 10 mA cm −2 , corresponding to a single-turn decay rate down to 0.00019 %. Besides, this flexible supercapacitor manifests outstanding electrochemical stability at different bending times. These advantages make the flexible supercapacitor device very promising for wearable electronics applications.
✓ 已验证
产品关联
DOI
高影响因子
ACS Omega
·
2024
·
IF 3.7
Huiqin Li
Soft electro-ionic actuators have received extensive research and attention due to their advantages such as low voltage response and adjustable deformation. However, they have not been able to enter the actual industry application like traditional rigid actuators; one of the reasons may be that the kinematic properties of actuators have been less studied. The electro-ionic actuator based on Ti3C2Tx MXene-CNT/PPy electrode prepared in this paper shows good bending displacement (18.8 mm) and strain (0.63%) under 4 V voltage. In this article, the overlapping nature and exponential function relationship of the actuator end-point trajectories are preliminarily discussed, and the morphology change and cubic polynomial function relationship of the actuator body are considered. Moreover, in application, a novel proof-of-concept model of smart wearable finger straps is proposed. This study is a unique attempt and is hoped to provide a new research perspective in the field of soft electro-ionic actuators.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Today
·
2025
·
IF 22
Bin Chen,Nan Jian,Junping Hu,Dianlun Wu,Yue Jiang,Xiaofeng Zhang,Jiatao Xie,Li Guo,Tao Song,Jiaen Huang,Shaojuan Luo,Wei Wei,Dongfeng Diao,Lina Li,Yingguo Yang,Deliang Zhu,Lei Wang,Yang Huang,Feng Rao
Two-dimensional (2D) MXenes are renowned for the unique feature of strong metallic conductivity, whereas the lack of semiconductive nature has become a crucial bottleneck that impedes MXenes’ rapid development in electronic devices. The challenge mainly comes from the stringent requirements for specific 2D compositions, whose synthesis and/or exfoliation techniques are too difficult to succeed. Here we proposed a facile and universal approach for fabricating semiconductive MXenes. Our demonstration showed that through hydrothermal-assisted intercalation treatment of the prototypical MXene-Ti 3 C 2 T x , shallow and deep Ti-lattice vacancies can be generated in its 2D nanosheets, weakening the original strong metallicity and even facilitating the wide-bandgap semiconductivity. Reciprocating bias polarization on the semiconductive 2D-Ti 3 C 2 T x nanosheet can induce reversible electrochemical-like migration of the surface anionic ligands, which enables high-nonlinearity and ultralow-current electrical switching capabilities for potential volatile selector applications. Our idea opens a new avenue for tuning the physical and chemical properties of MXenes, promoting their wide applications, especially in the field of 2D electronics.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF NANOBIOTECHNOLOGY
·
2022
·Vol. 20
·期 1
·1-12
·
IF 9.429
Yu Rongjun,Xue Jian,Wang Yang,Qiu Jingfu,Huang Xinyi,Chen Anyi,Xue Jianjiang
In this work, Ti 3 C 2 T x MXene was identified as efficient nanozyme with area-dependent electrocatalytic activity in oxidation of phenolic compounds, which originated from the strong adsorption effect between the phenolic hydroxyl group and the oxygen atom on the surface of Ti 3 C 2 T x MXene flake. On the basis of the novel electrocatalytic activity, Ti 3 C 2 T x MXene was combined with alkaline phosphatase to construct a novel cascading catalytic amplification strategy using 1-naphthyl phosphate (1-NPP) as substrate, thereby realizing efficient electrochemical signal amplification. Taking advantage of the novel cascading catalytic amplification strategy, an electrochemical biosensor was fabricated for BCR/ABL fusion gene detection, which achieved excellent sensitivity with linear range from 0.2 fM to 20 nM and limit of detection down to 0.05 fM. This biosensor provided a promising tool for ultrasensitive fusion gene detection in early diagnosis of chronic myelogenous leukemia and acute lymphocytic leukemia. Moreover, the manageable catalytic activity of MXene broke a path for developing nanozymes, which possessed enormous application potential in not only electrochemical analysis but also the extensive fields including organic synthesis, pollutant disposal and so on. Graphical Abstract
✓ 已验证
DOI
PubMed
高影响因子
Advanced Sustainable Systems
·
2021
·Vol. 5
·期 12
·2100263
·
IF 6.271
Xiao-Peng Li,Xiaofeng Li,Heguo Li,Yue Zhao,Wei Li,Shouke Yan,Zhong-Zhen Yu
Although solar-driven water evaporation technology is promising for desalination of seawater and purification of wastewater, it is still an issue to enhance the solar steam generation performances by efficient utilization of sustainable solar energy. Herein, 2D ferrous ion-crosslinked Ti 3 C 2 T x MXene-based aerogel films (MAFs) are fabricated as efficient solar steam generation devices by vacuum-assisted filtration of aqueous dispersions of MXene with FeCl 2 followed by freeze-drying. The strong interaction of ferrous ions with –OH groups of MXene sheets and the freeze-drying process are crucial for constructing structurally stable porous films with rough surfaces. Benefiting from the strong solar light absorption capacity and high solar-thermal energy conversion efficiency of MXene sheets, along with the hydrophilic and structurally stable porous architecture of MAFs, the average evaporation rates of an optimal MAF evaporator are as high as 1.67 and 14.52 kg m −2 h −1 with evaporation efficiencies of 94.3% and 91.7% under solar light irradiations of 1 and 10 kW m -2 , respectively. As a promising solar steam generation device, the 2D porous and hydrophilic MAF evaporator is highly efficient in generating clean water from both natural seawater and organic wastewater with satisfactory ion rejection efficiencies of close to 100%.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2024
·
IF 11.2
Hao Xu,Shuai Liu,Zhiang Li,Fan Ding,Weimin Wang,Kaikai Song,Ting Liu,Lina Hu
All-solid-state lithium batteries (ASSLBs) are important for enhancing safety across various applications related to lithium-ion batteries (LIBs). Lithium iron phosphate (LiFePO 4 ) is a widely utilized commercial cathode in LIBs, prized for its stable cycling performance, thermal stability, and low cost. However, low electronic conductivity and slow ion diffusion kinetics limit its application at high rates and low temperatures. Herein, Ti 3 C 2 T x MXene nanosheets (NSs) are introduced into the LiFePO 4 cathode. The continuous electron-conducting networks are constructed due to the high electrical conductivity of Ti 3 C 2 T x NSs. Meanwhile, the coordination environment of lithium ions in the cathode is weakened by the oxygenated end groups of Ti 3 C 2 T x NSs, and thus efficient ion-percolating networks are constructed. Therefore, the ionic and electronic conductivities of the modified cathode are significantly improved. Assembled all-solid-state LiFePO 4 /Li full cells with poly(ethylene oxide) as electrolyte exhibits high initial discharged capacities of 91.5 mAh g −1 at 10 C, and capacities of 155.1 mAh g −1 after 1000 cycles at 1 C with a retention rate of 93.8%. Furthermore, the cells still deliver excellent performance at high loading, room temperature, and low temperature. This work offers a facile and scalable strategy for designing high-performance ASSLBs.
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2021
·
IF 4.527
Yu Zeng,Shipeng Rao,Chenhan Xiong,Guoping Du,Zhaoyang Fan,Nan Chen
Dielectric polymer composites with conducting fillers would have great potential for diverse applications if their severe leakage loss could be addressed. In this regard, ternary composites using both ceramic and conducting materials as fillers might be an enabler for high dielectric constant and low dielectric loss. Herein, ternary composites with both Ti 3 C 2 T x MXene conducting nanosheets and CaCu 3 Ti 4 O 12 (CCTO) dielectric particles embedded in silicone rubber were studied. It was found that a ternary composite with 1.2 wt% (0.40 vol%) Ti 3 C 2 T x MXene and 12 wt% (2.58 vol%) CCTO could provide an overall superior performance that include a high dielectric constant of 8.8, low dielectric loss of less than 0.0015, good thermal stability up to 450 °C, and excellent mechanical properties with tensile strength of 569 kPa, elastic module of 523 kPa and elongation at break of 333%. The outstanding performance is attributed to the improved uniform dispersion and good interfacial compatibility of mixed fillers in the polymer matrix , suggesting ternary composites might be a better option over their binary counterparts in preparing high performance dielectric composites.
✓ 已验证
DOI
高影响因子
Advanced Membranes
·
2022
·
IF 0
Huan Qin,Haoyu Wu,Shu-Mao Zeng,Fan Yi,Si-Yong Qin,Yue Sun,Li Ding,Haihui Wang
Osmotic energy is a kind of blue energy that has recently been identified as an additional source of clean energy. Using a membrane-based reverse electrodialysis (RED) process, this blue energy can be obtained from acidic industrial wastewater with different proton concentration gradients. However, this process demands high-performance membrane that can withstand harsh environments, possessing the advantages of wide pH tolerance, high-temperature resistance and chemical stability, developing such membranes remain a challenge. Herein, we report a two-dimensional (2D) lamellar Ti 3 C 2 T x MXene membrane-based RED device for osmotic energy capturing from proton gradients. Such a membrane exhibits a typical surface-charge-governed ion transport feature. Moreover, the MXene membrane-based energy harvesting device holds the merits of outstanding pH and temperature resistance. It exhibits an output power density of 6.5 W/m 2 and also demonstrates stability over 200 h at pH = 0, which is 30% higher than the commercialization benchmark (5 W/m 2 ). The osmotic power density can be further enhanced to 11.1 W/m 2 at 330 K, demonstrating excellent thermal and chemical stability. This work can help better understand protons' transport behaviors in MXene membranes and open new avenues for applications in sustainable power conversion and wastewater treatment.
✓ 已验证
DOI
危险品化学品经营许可证（带存储）