JOURNAL OF SOLID STATE CHEMISTRY
·
2024
·
IF 3.2
Hongyan Zhang,Jiehui Huang,Yuxiang Shen,Zuofang Yao,Chenchen Xing,Yanping Hou
Z-Scheme heterojunction photocatalysts can effectively suppress the recombination of charge carriers while maintaining high redox capacity. In this study, ZnTe/WO 3 (ZW) Z-scheme heterojunction photocatalysts were synthesized using a hydrothermal method, and a series of photocatalytic materials were prepared for the simultaneous removal of tetracycline (TC) and Cu(II) from water. The physicochemical and photoelectrochemical properties of the catalytic materials were characterized through various methods, including SEM, XRD, XPS, and others. The experimental results indicate that the ZW-10 % composite material exhibits the most significant removal efficiency for pollutants. Within 150 min of visible light irradiation, the removal rates for TC and Cu(II) reach 73.8 % and 73.3 %, respectively, representing a substantial improvement compared to individual ZnTe and WO 3 . Free radical capture experiments and electron spin resonance analysis reveal that ·O 2 − and ·OH are the key reactive species responsible for TC oxidation, while electrons (e − ) dominate the reduction of Cu(II).
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2023
·Vol. 58
·期 26
·10686-10698
·
IF 4.5
Pan Chen,Wei Xing,Feng Yuting,Wei Zhenzhen,Zhao Yan
The separator is an essential component of lithium-ion batteries (LIBs), and polyimide (PI), a high-performance polymer with outstanding mechanical and thermal properties and a strong electrolyte affinity, has received substantial research as a potential separator material. In this work, we fabricated a PI composite separator (PI/WO 3 ) by combining the components in one step with concurrently electrospinning the precursor solution and electrospraying the WO 3 nanoparticles. The one step mixing method made the WO 3 uniformly distribute on the PI nanofiber surfaces with a result of porosity decrease. Although the introduction of WO 3 nanoparticles did not alter the chemical structure and the excellent thermal stability, the electrolyte wettability, mechanical strength and electrochemical performance of PI separator were all significantly improved by the nanoparticles, endowing the composite separator with superior cycle stability. Therefore, the use of WO 3 in a polyimide separator has practical significance for high safety and high performance of LIBs.
Graphical Abstract
研究领域:
材料科学
·
能源技术
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2024
·
IF 5.1
Shu Yan,Fan Yang,Xianhui Dong,Chao Zhang,Xinda Xu,Zongtao Chi,Woochul Yang,Wanfeng Xie
Real-time monitoring of triethylamine (TEA) is critical to environmental safety and daily life. However, detailed challenges remain for TEA gas sensors, such as low-cost and facile synthetic methods, and low working temperatures. In this study, a combination of hydrothermal and wet chemical approaches is utilized for the rational construction of α -MoO 3 @WO 3 with a sheet-like nanostructure. Additionally, the sensing performances towards triethylamine are investigated. According to the results, it was found that the α -MoO 3 @WO 3 sensor has a higher response value (80.4) and faster response and recovery times (9/26 s) than those of pristine MoO 3 at low optimum temperature (200 °C). Again, the α -MoO 3 @WO 3 based sensor also demonstrated high selectivity to TEA as well as good stability. The enhancement of the MoO 3 @WO 3 sensor's gas-sensitive mechanism may be attributed to the formation of n-n heterojunction between MoO 3 and WO 3 and the synergistic effect of both.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
OPTIK
·
2022
·
IF 2.84
Wei Shuangjiao,Bian Zhenglan,Wang Xingquan,Miao Xiaokang,Zhang Guilin,Xue Liang,Hu Anduo,Li Gaofang,Chu Fenghong
Pt-doped WO 3 materials have good hydrogen-sensing properties, which are widely used in the field of hydrogen sensing. In this paper, Sol-Gel method is used to prepare WO 3 /Pt sensing material and sensing characteristic to hydrogen is characterized by transmission optical fiber hydrogen sensing system fabricated at home. By optimizing the fabrication parameters including sol-gel viscosity, aging time, Pt:W moral ratio and layers of the sensing film, the sensitivity and repeatability of the film were greatly improved. The repeatability of the film is further improved by irradiating the film with an UV lamp. Experimental results show that by increasing the number of film layers from one to five (the thickness of the film is about 222 nm, and the content of Pt element is 13.47% by SEM test), the sensitivity increased by 1.666 times. The repeatability of the film can be improved by 3% through the irradiation of the ultraviolet lamp. The optimized WO 3 /Pt film was tested continuously for 12 times at 5% hydrogen concentration, and the zero drift was only 0.723%.
研究领域:
材料科学
·
传感器技术
✓ 已验证
产品关联
DOI
高影响因子
Nanomaterials
·
2022
·Vol. 12
·期 8
·1324
·
IF 5.719
Limin Ou,Shengheng Nong,Ruoxi Yang,Yaoying Li,Jinrong Tao,Pan Zhang,Haifu Huang,Xianqing Liang,Zhiqiang Lan,Haizhen Liu,Dan Huang,Jin Guo,Wenzheng Zhou
Compared with the polycrystalline system, the single-crystalline ternary cathode material has better cycle stability because the only primary particles without grain boundaries effectively alleviate the formation of micro/nanocracks and retain better structural integrity. Therefore, it has received extensive research attention. There is no consistent result whether tungsten oxide acts as doping and/or coating from the surface modification of the polycrystalline system. Meanwhile, there is no report on the surface modification of the single-crystalline system by tungsten oxide. In this paper, multirole surface modification of single-crystalline nickel-rich ternary cathode material LiNi0.6Co0.2Mn0.2O2by WO3is studied by a simple method of adding WO3followed by calcination. The results show that with the change in the amount of WO3added, single-crystalline nickel-rich ternary cathode material can be separately doped, separately coated, and both doped and coated. Either doping or coating effectively enhances the structural stability, reduces the polarization of the material, and improves the lithium-ion diffusion kinetics, thus improving the cycle stability and rate performance of the battery. Interestingly, both doping and coating (for SC-NCM622-0.5%WO3) do not show a more excellent synergistic effect, while the single coating (for SC-NCM622-1.0%WO3) after eliminating the rock-salt phase layer performs the most excellent modification effect.Keywords:nickel-rich NCM;single-crystalline;surface modification;WO3
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
PubMed
高影响因子
DALTON TRANSACTIONS
·
2023
·Vol. 52
·期 13
·4200-4206
·
IF 4
Jianxin Lv,Linghui Zhang,Lianxi Si,Hui Li,Wenbo Zhao,Fei An,Xia Feng,Shi Hu
Materials with accurate and durable gas detection are essential for gas sensors. We developed a facile and effective method to deposit Pd onto WO3 nanosheets and used the samples for hydrogen gas sensing. The combination of the 2D ultrathin nanostructure of WO3 and the spillover effect of Pd enables a detection concentration down to 20 ppm of hydrogen and high selectivity against other gases including methane, butane, acetone, isopropanol, etc. Moreover, the durability of the sensing materials was testified through 50 cycles of exposure to 200 ppm of hydrogen. These outstanding performances are mainly attributed to a homogeneous and tenacious decoration of Pd on the surface of WO3 nanosheets, providing an attractive choice for practical applications.
研究领域:
材料科学
·
纳米技术
·
气体传感
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2019
·Vol. 54
·期 22
·13914-13937
·
IF 3.442
Pudukudy Manoj,Jia Qingming
A controlled acidic precipitation is reported for the direct synthesis of nanosheets self-assembled hierarchical tungstic acid microspheres, and their annealing-dependent thermal conversion into WO 3 microstructures is studied for the first time. The synthesis was carried out without the use of any structure directing agents and hydrothermal conditions. The microspheres were found to be consisting of many single-crystalline and highly oriented nanosheets that were hierarchically self-aggregated in spherical form for the minimization of surface energy. An experimentally validated time-dependent formation and growth mechanism was proposed for the development of microspheres. The characterization results indicated that the morphology-preserved thermal decomposition of H 2 WO 4 into WO 3 microspheres occurred at 400 °C, whereas a morphology distortion was noticed for the sample synthesized at 600 °C. The increase in annealing temperature further increased the crystallinity of WO 3 without changing its monoclinic crystal structure. However, it has a diminishing effect in the specific surface area, pore size and pore volume of the annealed samples. Moreover, the adsorption of methylene blue in aqueous medium was carried out to evaluate its potential environmental application. The WO 3 microspheres synthesized at 400 °C showed high adsorption capacity (63 mg/g) compared to the same at 600 °C (56 mg/g). The high activity could be ascribed to the synergistic effects of high surface area, low particle size, porosity, specific morphology and more negative zeta potential. The adsorption further followed pseudo-second-order kinetics with a best fit of the experimental and theoretical values.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2024
·
IF 8.1
Xuan Wu,Xingwu Guo,Chenjing Gao,Jing Luo,Lewen Nie,Juan Chen,Liming Peng
WO 3 -based optical hydrogen sensors, while advantageous due to their ignition-free operation and resistance to electromagnetic interference, face limitations due to slow response kinetics in hydrogen gasochromic processes. This study presents a novel post-treatment method using aqueous sulfuric acid, which significantly enhances the response speed of mesoporous Pt/WO 3 films. After treatment, the films exhibit an ultrashort response time of 2.4 s towards 4% H 2 /Ar, a marked improvement from 7.1 s prior to the treatment. The treated films also show excellent reversibility of 120 gasochromic cycles. The adsorbed acid layer is proved to be the cause of accelerated hydrogen gasochromic response. This exceptional performance is attributed to increased proton conductivity and the high porosity of the mesoporous structure. A modified model is proposed for the acceleration effect by acid post-treatment. Our post-treatment method represents a significant advancement in the reliable detection of hydrogen leaks at room temperature.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
ChemSusChem
·
2024
·
IF 7.5
Hongjing Wang,Wenjie Zhan,Shaojian Jiang,Kai Deng,Ziqiang Wang,You Xu,Hongjie Yu,Liang Wang
Graphical Heterostructure Ni 3 N/WO 3 nanosheet arrays loaded on nickel foam (Ni 3 N/WO 3 /NF) were synthesized by combining cation-exchange with the hydrothermal method and annealing under an ammonia atmosphere (NH 3 ). Ni 3 N/WO 3 nanosheet arrays consist of irregular particles and have abundant active sites due to the heterogeneous interface between Ni 3 N and WO 3 . Ni 3 N/WO 3 /NF was used for efficient electrocatalytic glycerol oxidation coupled to hydrogen production. Glycerol oxidation-assisted water electrolysis has emerged as a cost-effective way of co-producing green hydrogen and HCOOH. Still, preparing highly selective and stable nickel-based metal electrocatalysts remains a challenge. Herein, heterostructure Ni 3 N/WO 3 nanosheet arrays of bifunctional catalysts with large specific surface areas loaded on nickel foam (denoted as Ni 3 N/WO 3 /NF) were synthesized. This catalyst was for glycerol oxidation reaction (GOR) and hydrogen evolution reaction (HER) with excellent catalytic performance, a voltage saving of 267 mV compared to oxygen evolution reaction (OER), and a HER overpotential of 104 mV at 100 mA cm −2 . The cell voltage in the assembled GOR//HER hybrid electrolysis system reaches 100 mA cm −2 at 1.50 V, 296 mV lower than the potential required for overall water splitting. This work demonstrates that replacing GOR with OER using a cost-effective and highly active Ni-based bifunctional electrocatalyst can make hybrid water electrolysis an energy-efficient, sustainable, and green strategy for hydrogen production.
研究领域:
材料科学
·
能源化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2020
·Vol. 44
·期 44
·19013-19021
·
IF 3.288
Yi Zheng,Yiliang Shao,Xingzhi Jin,Min Shu,Longxiao Zhang,Chunlei Li
The contact quality of a composite is an important factor for the transfer and separation of photogenerated carriers. For this, we demonstrated a cation exchange method for the in situ construction of WO3/PbWO4 linked by WO6 octahedral crystal structure units, where WO3 was placed on the surface of PbWO4. We found that the apparent rate constant of the as-prepared WO3/PbWO4 was significantly increased (17 times higher than any single one). Our investigation indicated a remarkably enhanced photodegradation rate, originating from high contact quality. The photogenerated carriers of WO3/PbWO4 were greatly separated via the grain boundary, making WO3/PbWO4 exhibit 22 times higher photocurrent density than pristine PbWO4. Moreover, the photoelectrons and holes were separated through the high contact quality grain boundary built-in electric field, which is in accordance with the transmission path of the Z-scheme. Compared with the interface, a grain boundary is more conducive to the photocatalytic process. This study provides a feasible strategy to build a highly efficient Z-scheme photocatalyst with high contact quality grain boundary to remove organic pollutants.
研究领域:
材料科学
·
环境科学
·
光催化
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2020
·
IF 16.683
Yechen Wang,Yaru Wang,Jianjun Zhao,Min Chen,Xubo Huang,Yiming Xu
Production of H 2 O 2 via a more economic, green and safe way is challenging. In this work, we report an efficient production of H 2 O 2 from oxygen reduction reaction (ORR) in aqueous solution over a modified WO 3 with Au nanoparticles . Under visible light at wavelengths longer than 420 nm for 5 h, H 2 O 2 measured from WO 3 and Au/WO 3 were 1.07, and 177 μM, respectively. On addition of methanol, H 2 O 2 obtained from WO 3 , Au/WO 3 , and Au/SiO 2 were 8.55, 544, and 0.36 μM, respectively. Photoluminescence and electrochemical measurement revealed that there was an interfacial electron transfer from the excited WO 3 to Au, followed by two-electron reduction of O 2 on Au sites. Under visible light at wavelengths longer than 535 nm, interestingly, H 2 O 2 was also produced from Au/WO 3 (39 μM at 5 h), while the photocurrent of water oxidation on Au/WO 3 was much larger than those on Au/SiO 2 and WO 3 . Clearly, there is also an interfacial electron transfer from the plasmonic Au to WO 3 , followed by ORR to H 2 O 2 , but such a process fails when WO 3 is excited. However, the production of H 2 O 2 on Au/WO 3 was determined by several factors, including Au content, light absorption, and particle size. A maximum H 2 O 2 was observed at an initial pH 3.0 from 0.35 wt% Au/WO 3 , prepared at 400 °C. Moreover, at the same loading on WO 3 , Au was more efficient than Pd, Ag, Pt, Ni, Cu, and Co, while at the same Au loading, WO 3 was more efficient than BiVO 4 and Bi 2 WO 6 . The superior performance of Au/WO 3 is mainly due to its ability to undergo selective ORR to H 2 O 2 , and to release protons into aqueous solution protecting H 2 O 2 from decomposition.
研究领域:
材料科学
·
化学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
SURFACE ENGINEERING
·
2022
·
IF 2.451
Sang Xiong,Ruo-tian Wang
Europium nitrate, ammonium tungstate and hexadecyl trimethyl ammonium bromide were used, and Eu-doped WO3 (WO3:Eu3+) nanopowder was synthesized by the micro-emulsion method. Tetraethyl silicate was hydrolysed into SiO2 and WO3:Eu3+ nanopowder coated with SiO2 (SiO2/WO3:Eu3+) was obtained. The microstructure and morphology of the prepared nano-SiO2/WO3:Eu3+ powders were characterized by XRD, SEM, TEM and HRTEM. Results showed that the prepared nano-SiO2/WO3:Eu3+ powders composed of WO3 of monoclinic and SiO2 of amorphous, which was spherical and granular, and the grain size reaches 50 nm. The tribological behaviour of nano-SiO2/WO3:Eu3+ as extreme pressure and anti-wear additive in the water-based fluid was studied by a four-ball machine. The results demonstrate that nano-SiO2/WO3:Eu3+ exhibits superior load-bearing capacity, anti-wear and anti-friction performance in water-based fluid, especially when the optimal concentration of nano-SiO2/WO3:Eu3+ is 0.4 wt-%. WSD, COF and wear volume of the nano-SiO2/WO3:Eu3+ decreased by 62.43%, 30.20% and 67.34%, respectively, compared with that of the water-based fluid.
研究领域:
材料科学
·
摩擦学
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）