ANALYTICAL BIOCHEMISTRY
·
2017
·
IF 2.334
Xuan Ni,Bing Xia,Lumei Wang,Jing Ye,Gaoshang Du,Haiwei Feng,Xiaotong Zhou,Tong Zhang,Wenhao Wang
In this paper, we developed a fluorescent aptasensor for 17β-estradiol (E2) determination in aqueous solution using label-free E2-specific aptamer, gold nanoparticles (AuNPs) and Rhodamine B (RhoB) as sensing probe, fluorescent quencher and fluorescent indicator respectively. In the absence of E2, AuNPs were wrapped by E2 aptamer and maintained dispersed in NaCl solution basically. These dispersed AuNPs could effectively impair the originally high fluorescence of RhoB. Contrarily, in the presence of E2, E2 aptamer could specifically combine with E2 to form E2-aptamer complex, so the AuNPs were released by E2 aptamer and aggregated under the influence of NaCl. The aggregated AuNPs have a weak influence on RhoB fluorescence. Therefore, the E2 concentration can be determined by the change of fluorescence intensity of RhoB. This fluorescent assay has a detection limit as low as 0.48 nM, a linear range from 0.48 to 200 nM, and high selectivity over other disrupting chemicals. It was applied to determine E2 in water samples with recoveries in the range of 94.3–111.7%. The fluorescent aptasensor holds great potential for E2 detection in environmental water samples.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHIMICA ACTA
·
2017
·Vol. 184
·期 3
·951-959
·
IF 4.58
Zhang Yuhuan,Wang Yanru,Zhu Wenxin,Wang Jing,Yue Xiaoyue,Liu Wei,Zhang Daohong,Wang Jianlong
The capability of multi-level logic operations in biological diagnosis is far from being fully realized. In particular, the simplification of logic judgments to realize rapid, on-site complex diagnoses is still a key issue in bioelectronics. The authors here describe the construction of a colorimetric multilevel DNA circuit that incorporates two IMPLY gates and a sample extraction technology (SET) with anti-BPA aptamer as a co-recognizing element and the color of gold nanoparticles as the output signal. The circuit can perform multi-bioanalysis of the plasticizers and hormone mimetics bisphenol A (BPA) and bisphenol S (BPS). The assay is based on the finding that the aptamer against BPA can recognize both BPA and BPS. This DNA logic detection system is simple, fast, sensitive and selective because of the utilization of a co-recognition element which decreased input numbers. This, in turn, cascades multiplex Boolean logic gates and simplifies the diagnostic challenge. Both BPA and BPS can be determined by photometry at 620 nm, the limit of detection being 1.5 ng⋅mL −1 for BPA and 1.3 ng⋅mL −1 for BPS. Application to (spiked) water samples shows good analytical performance in terms of recovery (95.4 to 106.8%), linear range (4.4 to 66 ng⋅mL −1 for BPA, 2.5 to 75 ng⋅mL −1 for BPS) and correlation coefficients (>0.98). In our perception, the method represents a simple route for the fabrication of colorimetric multi-level DNA circuits. It may shorten the gap between bioelectronic logic circuits and high throughput real sample analysis.
Illustration of sample extraction treatments (SET) of bisphenol A (BPA) and bisphenol S (BPS) and the three-input IMPLY1-IMPLY2 logic operation with BPA, BPS and anti-BPA aptamer as inputs.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2017
·Vol. 35
·期 7
·823-836
·
IF 1.692
Nie Guang-hui,Wu Wen-jun,Yue Xi,Liao Shi-jun,Li Xiu-hua
A series of hydroxide conductive polymers QTBMs carrying dense aromatic side-chain quaternary ammonium groups has been synthesized by using a new monomer of 3,3′-di(3″,5″-dimethylphenyl)-4,4′-difluorodiphenyl sulfone and other commercial monomers via polycondensation reaction, and subsequent bromination, quaternization and alkalization. The chemical structures of the ionomers were confirmed by 1 H- and 13 C-NMR spectroscopy. Water uptake, swelling ratio, hydroxide conductivity, the number of bonded water per ammonium group ( λ ), volumetric ion exchange capacity (IEC Vwet ), mechanical and thermal properties, and chemical stability were systematically evaluated for the series of QTBMs membranes. QTBMs showed IECs ranging from 1.02 meq·g −1 to 2.11 meq·g −1 ; in particular, QTBM-60 membrane with the highest IEC (2.11 meq·g −1 ) had very high hydroxide ion conductivity of 131.9 mS·cm −1 at 80 °C, which was attributed to the well assembled nano-channels with distinct phase separation evidenced by small-angle X-ray scattering (SAXS). It was found that the hydrated QTBMs membranes were mechanically stable with moderate water uptakes and swelling ratios, high chemical stability under the harsh alkaline conditions. This work provides a facile way to prepare anion exchange membranes (AEMs) with high performances for the application in alkaline fuel cells.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2017
·Vol. 409
·期 8
·2239-2246
·
IF 3.431
Zhang Jie,Zhang Tiehua,Guan Tianzhu,Yu Hansong,Li Tiezhu
Widespread use of bisphenol A (BPA) and other bisphenol analogues has attracted increasing attention for their potential adverse effects. As environmental endocrine-disrupting compounds (EDCs), bisphenols (BPs) may activate a variety of nuclear receptors, including glucocorticoid receptor (GR). In this work, the binding of 11 BPs to GR was investigated by fluorescence polarization (FP) assay in combination with molecular dynamics simulations. The human glucocorticoid receptor was prepared as a soluble recombinant protein. A fluorescein-labeled dexamethasone derivative (Dex-fl) was employed as tracer. Competitive displacement of Dex-fl from GR by BPs showed that the binding affinities of bisphenol analogues were largely dependent on their characteristic functional groups. In order to further understand the relationship between BPs structures and their GR-mediated activities, molecular docking was utilized to explore the binding modes at the atomic level. The results confirmed that structural variations of bisphenol analogues contributed to different interactions of BPs with GR, potentially causing distinct toxic effects. Comparison of the calculated binding energies vs. experimental binding affinities yielded a good correlation ( R
2 = 0.8266), which might be helpful for the design of environmentally benign materials with reduced toxicities. In addition, the established FP assay based on GR exhibited the potential to offer an alternative to traditional methods for the detection of bisphenols.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF SOILS AND SEDIMENTS
·
2017
·Vol. 18
·期 3
·845-851
·
IF 2.522
Guan Tianzhu,Sun Yonghai,Zhang Tiehua,Li Tiezhu,Li Zhuolin,Zhang Yue,Zhang Jie,Wang Yongjun
Purpose Extensive use of bisphenol A (BPA) and its analogues has caused increasing concern over the potential adverse health impacts of these chemicals. The aim of this study was to develop a fluorescence polarization (FP) assay to detect bisphenol A, bisphenol AF (BPAF), tetrabromobisphenol A (TBBPA), and tetrachlorobisphenol A (TCBPA) simultaneously. Materials and methods A recombinant peroxisome proliferator-activated receptor α ligand binding domain (mPPARα-LBD*) was chosen as recognition element in developed FP procedure. The environmental soil samples were assayed for (1) analytical parameters, (2) matrix effect, (3) recovery experiment, and (4) HPLC validation. For statistical analysis, GraphPad Prism 5 software was used. Results and discussion Under the optimized conditions, this assay had an IC 50 of 2.80, 6.84, 4.67, and 4.66 μg g −1 for BPA, BPAF, TBBPA, and TCBPA, respectively. The developed assay demonstrated the limits of detection (LODs) of 0.35, 0.21, 0.27, and 1.03 μg g −1 for these four compounds, which could meet the requirement of environmental monitoring. For spiked soil samples, mean recoveries of the analytes ranged from 85.3 to 101.1%, yielding coefficient of variations (CVs) ranged from 9.8 to 17.5%. Conclusions In this study, a broad-specificity receptor protein for BPA, BPAF, TBBPA, and TCBPA was produced and was used to develop an FP assay in soil samples. The efficiency and simplicity of the proposed assay define its possible application as a screening tool for environmental monitoring.
✓ 已验证
产品关联
DOI
高影响因子
SCIENCE OF THE TOTAL ENVIRONMENT
·
2017
·
IF 4.9
Panpan Diao,Qi Chen,Rui Wang,Dong Sun,Zhuoping Cai,Hao Wu,Shunshan Duan
Abtsract Three phenolic endocrine-disrupting compounds, 4-nonylphenol, 4-tert-octylphenol and bisphenol A, were determined in water, sediment and biota (fish, shrimp and mollusk) collected from sites along the Pearl River Estuary, China. The 4-nonylphenol, 4-tert-octylphenol and bisphenol A concentrations ranged from 1.20–3352.86 ng/L in the water, < 0.17–20.80 ng/g dw in the sediment and < 1.49–237.12 ng/g dw in the biota. The concentrations of 4-nonylphenol were higher than those of 4-tert-octylphenol and bisphenol A in the water, sediment and organisms. Moreover, the bioconcentration factors (BCFs) and biota-sediment accumulation factors (BSAFs) of 4-nonylphenol and bisphenol A were calculated, and were found to be higher for 4-nonylphenol and in demersal organisms. To assess co-exposure to phenolic endocrine-disrupting compounds, the 4-nonylphenol equivalent was employed to evaluate the potential risks to aquatic organisms and human health, and the results indicated a low risk.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Analytical Methods
·
2016
·Vol. 9
·期 1
·134-140
·
IF 1.915
Jinfeng Zou,Zhiguang Liu,Yujing Guo,Chuan Dong
Bisphenol A (BPA) is an important and widely used industrial chemical that is harmful to both the environment and human health. Graphene/platinum nanoparticles (Gr/PtNPs) functionalized with heptakis-(2,3,6-tri-O-methyl)-β-cyclodextrin (TM-β-CD) were successfully synthesized using a simple wet chemistry strategy. The new nanocomposite had both the excellent properties of the Gr/PtNPs (large surface area, high conductivity and excellent electrocatalytic activity) and the cyclodextrin (host–guest supramolecular recognition and enrichment capability). It had a remarkable synergistic effect on the electrochemical reaction of BPA and a highly sensitive electrochemical sensor was developed to detect BPA. The oxidation peak current of BPA was greatly enhanced at the TM-β-CD-Gr/PtNPs modified glassy carbon electrode (GCE) compared with the Gr/PtNPs/GCE and the TM-β-CD-Gr/GCE. Under the optimum condition, the peak current for BPA increased linearly with concentration in the range 5.0 × 10−8 to 8.0 × 10−5 mol L−1. The detection limit was 1.5 × 10−8 mol L−1 (S/N = 3). This sensor is cost-effective and convenient and shows great potential for the detection of trace amounts of phenol compounds in environmental pollutants.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2016
·
IF 4.758
Tianrong Zhan,Yang Song,Zhengwei Tan,Wanguo Hou
In the present work, the ultrathin exfoliated Ni 2 Al layered double hydroxide (ELDH) nanosheets were prepared by using l -asparagine as pre-intercalator in aqueous medium . The transmission electron microscopy and atomic force microscopy images displayed that ELDH nanosheets had lost the original hexagon of hydrotalcite with about 200 nm lateral size and less than 3 nm thickness. Then a sensitive electrochemical sensor was fabricated for bisphenol A (BPA) detection based on ELDH modified glassy carbon electrode with aid of film-forming agent chitosan. The proposed sensor showed an efficient electrocatalytic performance on the oxidation of BPA with the enhanced oxidation response and the lowered oxidation overpotential (0.489 V). Differential pulse voltammetry (DPV) was employed for the determination of BPA with a wide linear range from 0.02 to 1.51 μM. The detection limit was calculated as 6.8 nM (S/N = 3). The resultant sensor exhibited good reproducibility, selectivity and acceptable stability due to the contribution of the more active sites and the large surface area from ELDH nanosheets. Additionally, the concentrations of BPA in milk samples were analyzed by this developed method with an acceptable result.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2016
·
IF 3.782
Cheng-bin Gong,Yu-zhu Yang,Yue-hong Yang,An-xun Zheng,Song Liu,Qian Tang
A photoresponsive hollow molecularly imprinted polymer (PHMIP) was fabricated for photoresponsive recognition and determination of trace bisphenol A (BPA) in aqueous media using a water-soluble azo compound as the functional monomer . The PHMIP was prepared on sacrificial silica microspheres by surface imprinting and subsequent removal of the silica core. The PHMIP displayed photocontrolled recognition for BPA. SEM, TEM , FT-IR, TGA and N 2 adsorption-desorption analyses confirmed successful formation of the hollow structure. The PHMIP displayed higher binding capacity, a larger specific area, and faster mass transfer rate than its corresponding surface molecularly imprinted polymer. The PHMIP was used to determine trace BPA in real samples with a limit of detection of 0.5 ppm. For samples spiked at 0–10 ppm, the BPA recoveries were in the range of 93.0%–99.0%. This PHMIP-based method provides convenient and inexpensive detection method for trace BPA in environmental samples. This method is especially suitable for determining materials that do not possess specific spectroscopic or luminescent properties.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 70
·66297-66306
·
IF 3.289
Tingting Chang,Yuxin Liu,Xiangyang Yan,Shaomin Liu,Haisong Zheng
In this study, a facile method was used to synthesize core–shell magnetic surface molecularly imprinted polymer (Fe3O4@MIP) nanospheres. Initially, monodisperse carboxyl-functionalized Fe3O4 nanoparticles (Fe3O4–COOH) were obtained through a one-step hydrothermal method, the imprinted layer was then synthesized directly on the surface of the magnetic core via a one-pot sol–gel method. The morphology and structural properties of the prepared magnetic nanoparticles were characterized by XRD, TEM, SEM, FT-IR and VSM. The synthesis conditions for the formation of Fe3O4@MIPs were systematically investigated. It was found that the monodispersity and morphology of Fe3O4@MIPs were highly influenced by the concentration of ammonium hydroxide (NH3·H2O), the solvent composition (methanol–water), and the molar ratio of functional monomer and cross-linker. Interestingly, the preparation process of the Fe3O4@MIPs was direct and simple without further complex modification on the surface of Fe3O4 compared with conventional imprinting methods, which makes the saturation magnetization value for the Fe3O4@MIPs samples higher than those of common obtained materials. Meanwhile, the entire process of sol–gel polymerization was shortened to 1 h, which was much shorter than typical polymerization times. The adsorption performances of Fe3O4@MIPs and Fe3O4@NIPs with optimized morphologies were evaluated in bisphenol A (BPA) aqueous solution. The results showed that the product had the advantages of large adsorption capacity, good selectivity and favourable reusability, which are ascribed to its high uniformity and monodispersity. In addition, the molecular recognition of the obtained Fe3O4@MIPs was realized in aqueous media, which is conducive to practical applications on a larger scale and makes Fe3O4@MIPs an ideal adsorption and enrichment material.
✓ 已验证
产品关联
DOI
高影响因子
MACROMOLECULAR RESEARCH
·
2016
·Vol. 24
·期 5
·409-414
·
IF 1.357
Zheng Jian,Zhang Yan,Wang Ying,Gan Jianqun,Shen Lu,Luo FuBin,Liang Liyan,Wu Kun,Lu Mangeng
A lateral phthalonitrile functionalized main-chain polybenzoxazine precursor has been successfully synthesized. The structure was characterized by proton nuclear magnetic resonance ( 1 H NMR) and Fourier transform infrared (FTIR). The formation of benzoxazine rings were confirmed by the characteristic resonances observed at about 4.55 (C-CH 2 -N) and 5.30 ppm (N-CH 2 -O) and the absorbance at 950 cm -1 of benzene attached with an oxazine ring. The curing behavior was monitored by differential scanning calorimetry (DSC) and in situ FTIR. The completion of polymerization was proved by the disappearance of the band located at 950 cm -1 in FTIR. Thermogravimetric analysis (TGA) was used to investigate the thermal stability, and the results indicated that the thermal stability of the cured polymer gained significant improvement than that without phthalonitrile functionalization.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL LETTERS
·
2016
·
IF 1.088
Chifang Peng,Na Pan,Zhengjun Xie,Liqiang Liu,Jie Xiang,Chunli Liu
✓ 已验证
产品关联
DOI
高影响因子