ELECTROCHIMICA ACTA
·
2022
·
IF 7.336
Shuyan Shao,Tao Wen,Ziqun Wang,Xiaoshuang Yin,Ying Liu,Wenzhong Yang,Yun Chen
Electrocatalytic reduction of CO 2 to formate is an extremely attractive route. Here, we developed a SnSe 2 -graphene composite catalyst, and SnSe 2 nanosheets were linked to graphene by Sn-O-C bonds to form complicated hierarchical nanosheet structure. Due to the intrinsic activity of SnSe 2 and the modification of graphene, the catalyst performed excellent electrocatalytic efficacy for the reduction of CO 2 to formate, with a maximum Faraday efficiency up to 95.1% at -0.9 V (vs. RHE) and a current density of 11.8 mA cm −2 under the optimal conditions. Kinetic experiments indicated that the SnSe 2 -graphene composite achieved efficient formate selectivity for CO 2 reduction by increasing the initial transfer rate of electrons to the CO 2 molecule.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Weiye Chen,Lei Chen,Liangyu Li,Chuanshuai Dong,Lizhi Zhang
Phase change energy storage technology has broad applications in many engineering fields, such as building energy conservation, aerospace, and thermal management of electric equipment. However, the inorganic phase change materials suffer a lot from supercooling, phase separation, and low thermal conductivity. Therefore, this paper aims at developing a novel electrically-triggered phase change composite by making use of its supercooling characteristics, achieving a controllable release of latent heat as it is wanted. Polished by radial and axial grinding respectively, both surface-triggered electrodes (STE) with a uniform rough structure and point-triggered electrodes (PTE) with the gradient rough structure were prepared to investigate the effect of surface structure on the electrical crystallization. The 100-cycle test results indicated the newly-prepared electrode achieved a stable electrically-triggering ability. The oxidation rate of electrodes was significantly affected by interface characteristics of the gas–liquid-solid interfaces. What’s more, the effect of voltage and supercooling degree on the crystallization behaviours, like induction time, morphology, and growth of the dendrite, and heat transfer process, were comprehensively investigated. With the increase of the supercooling degree, the dendrite shape gradually changed from acicular crystal to flocculent crystal, and the induction time decreased rapidly. To improve the thermal conductivity, a novel phase change composite using sodium acetate trihydrate/carboxymethyl cellulose/expanded graphite (SAT/CMC/EG) was developed. Considering both thermal conductivity and electrical nucleation, the optimized mass ratio of SAT: CMC: EG was 100:1:8. These research findings would provide valuable guidance in the intelligently-controllable energy storage technology.
✓ 已验证
产品关联
DOI
高影响因子
IONICS
·
2022
·Vol. 29
·期 3
·917-930
·
IF 2.961
Zhong Weixu,Hong Jiabin,Wang Chunxiang,Li Zhifeng,Chen Jun,Dmytro Sydorov
Nano-MoS 2 and MoS 2 /graphene nanocomposites are prepared by a simple xylitol auxiliary ball milling method. Xylitol can increase the shear force in the ball milling process and overcome the interlayer van der Waals force between MoS 2 and the graphite layer, thus improving the efficiency of preparing nanomaterials by ball milling method. As a result, the MoS 2 /graphene hybrid nanosheets exhibit higher discharge capacity and better cycle stability as lithium-ion anode materials. When the original addition amount of MoS 2 and graphite is 1:1, the materials have the best electrochemical behaviors. The initial discharge capacity is as high as 1014 mAh·g −1 at a current density of 50 mA·g −1 , after 300 cycles at a current density of 250 mA·g −1 , the capacity remains at 664 mAh·g −1 without decay. Therefore, the xylitol auxiliary ball milling method is suitable for the scalable preparation of new transition metal sulfide (TMDS)-based anodes for lithium-ion batteries.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Shizong Wang,Jianlong Wang
Carbon-based catalysts have been widely investigated in the field of advanced oxidation processes (AOPs), however their structural stability during the AOPs has been neglected. In this study, the decomposition of different carbonaceous materials, including g-C 3 N 4 , biochar, biochar/g-C 3 N 4 composite, graphene oxide and COF in sulfate radical-based and hydroxyl radical-based AOPs was investigated, mainly focusing on g-C 3 N 4 and modified g-C 3 N 4 in peroxymonosulfate (PMS)-based AOPs. The g-C 3 N 4 prepared with different precursors and modified g-C 3 N 4 were selected to investigate their structural stability in PMS-based AOPs in detail. The results showed that both g-C 3 N 4 and modified g-C 3 N 4 were partially decomposed in the PMS-based AOPs leading to the carbon dissolution in solution. The concentration of dissolved carbon varied with the precursor of g-C 3 N 4 and experimental conditions such as PMS concentration and inorganic ions. Modified g-C 3 N 4 presented higher concentration of dissolved carbon than pristine g-C 3 N 4 . Based on the results of experiments and characterization, the decomposition of g-C 3 N 4 and modified g-C 3 N 4 were mainly due to their interaction with PMS. Modified g-C 3 N 4 had higher adsorption capacity for PMS than pristine g-C 3 N 4 leading to the enhanced interaction with PMS. The dissolved carbon from modified g-C 3 N 4 would not affect the removal efficiency, but the mineralization efficiency of targeted organic pollutants. In addition, the dissolved components of g-C 3 N 4 and modified g-C 3 N 4 showed acute toxicity. In addition to g-C 3 N 4 -based catalysts, other materials such as covalent organic compound and graphene oxide could be also decomposed partially. The decomposition of g-C 3 N 4 was also found in the peroxydisulfate and hydrogen peroxide-based AOPs. This study provided insight into the structural stability of g-C 3 N 4 -based catalysts in the PMS-based AOPs, which deserved much attention in the future studies from the point view of the design and environmental application of g-C 3 N 4 -based catalysts.
✓ 已验证
产品关联
DOI
高影响因子
DIAMOND AND RELATED MATERIALS
·
2022
·
IF 3.806
Xuehan Xiao,Zongxue Yu,Zhong Yang,Juan Wang,Qingcan Xiang Ximei Zhu
The treatment of oilfield wastewater has been a problem for oil workers for a long time. Indeed, it is economical, efficient and environmental friendly to treat oilfield wastewater with membrane. However, the contamination and stability of membrane limit the application of membranes. This study focuses on improving the long-term integrated treatment of oilfield wastewater by commercial PVDF membranes in different environments. Sepiolite(Sep)@MnO 2 composites were synthesized by hydrothermal method . SEP@MnO 2 and graphene oxide(GO) were left on the commercial PVDF membrane after vacuum filtration. Then the membrane was subjected to 120 vacuum thermal reduction. The prepared Sep@MnO 2 /RGO composite membrane showed good separation result and flux for different proportion of oilfield wastewater. Moreover, it can remove some common salt (NaCl,MgSO 4 , CaCl 2 , MgCl 2 ) and heavy metal ions (Ni 2+ , Fe 3+ , Cr 6+ ) in oilfield wastewater. Even more valuable, a few addition of H 2 O 2 to oilfield wastewater caused an oxidation reaction and the produced in situ microbubbles greatly enhance the antifouling property of the membrane. After 15 cleaning tests and 12 h of cycling, the membrane still showed strong separation ability. Compared with other oil-water separation membranes reported, this membrane demonstrated a longer and better separation effectively. All the work promotes the application of membrane separation technology in oilfield wastewater treatment . Hopefully, the application of in-situ microbubble method on membrane will solve the problem of membrane pollution in oilfield wastewater treatment.
✓ 已验证
产品关联
DOI
高影响因子
Energy Reports
·
2022
·
IF 4.937
Lili Jiang,Le Zhao,Guangyuan Chen,Meixia Li,Ruijia Zhang
In this study, octadecylamine/graphite foam composite phase change materials (ODA/GF CPCMs) were prepared by vacuum impregnation; octadecylamine (ODA) was used as the phase change materials (PCMs), and graphite foam (GF) was used as the support material. Polyurethane (PU) foam obtained after hydrolysis in 40 wt% NaOH solution at 80 °C for 30 min was the template for the GF; therefore, the prepared GF has many interpenetrating pore structures, providing many adsorption sites for PCMs. For the ODA/GF-3 CPCMs with 15 wt% graphite addition, the loading of ODA is as high as 92.3%, the thermal stability is excellent, the melting temperature is 52.1 °C, and the latent heat of fusion is 218. 1 J/g, which is 1.1 times that of pure ODA. The thermal conductivity of ODA/GF-3 CPCMs is 0.725 W/m•K, which is 2.2 times that of pure ODA. These results indicate that ODA/GF CPCMs have good thermal properties, and their competitiveness in the field of energy storage is greatly improved due to their excellent performance.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES B-BIOINTERFACES
·
2022
·
IF 5.999
Jinxin Liu,Zixi Zheng,Jialu Luo,Pan Wang,Gaohui Lu,Jianming Pan
Development of wound dressings that not only have multiple advantages including good biocompatibility, barrier properties, adhesive properties , but also exhibit anti-bacterial, anti-infection, and promote cell adhesion , accelerated wound healing process, remains challenging in the skin tissue engineering. In this work, a noninvasive adhesive biofoam with interconnectivity structure and antibacterial property was first-time designed through solid surfactant stabilized high internal phase emulsion (HIPE) template , where bacteriostatic Zn-CuO@GO nanosheets dynamic assemble with 4-vinylphenylboronic acid at the oil/water interface as cooperative emulsifier . Taking advantage of the cooperative assembly of the PBA/Zn-CuO@GO, the biofoams display microfibrousity and interconnectivity to facilitate material-cellular interaction as well nutrient exchange, and can effectively inhibit the growth of E. coli and S. aureus. Meanwhile, phenylboronic acid functional groups not only endow biofoam reversible adhesive property though dynamic phenylboronic acid/cis-diol interaction, but also facilitate the rearrangement of Zn-CuO@GO nanosheets in more uniform way at emulsion interface. Taken together, the biofoams can strongly adhere to the wound bed reducing the risk of infection and accelerate earlier tissue regeneration , which exhibit great potential in bioengineering application.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMOSPHERE
·
2022
·
IF 8.943
Liangdi Zhu,Yuxing Zhou,Lingyun Fei,Xunlong Cheng,Xixi Zhu,Lanqing Deng,Xin Ma
CuO/Fe 3 O 4 /GO, as a Z-scheme heterojunction catalyst, was successfully synthesized and used as a photocatalyst for removing tetracycline from aqueous solution. The CuO/Fe 3 O 4 /GO heterogeneous catalyst combines the narrow bandgap semiconductor CuO, oxygen vacancies of Fe 3 O 4 , and oxygen-containing reaction sites of GO. Without the addition of activators (persulfate or H 2 O 2 ), the photocatalytic performance on decomposing tetracycline is very excellent. Compared with GO, Fe 3 O 4 , and CuO, CuO/Fe 3 O 4 /GO exhibits superior photocatalytic performance. Under visible light radiation , CuO/Fe 3 O 4 /GO generates h + and ⋅O 2 − , which are the mainly responsible active groups for TC degradation . The effects of various pH, catalysts, and reuse on the degradation performance are evaluated, and the optimal conditions for CuO/Fe 3 O 4 /GO removal of tetracycline are obtained at pH 7, catalyst dosage 20 mg⋅L −1 , TC at a concentration of 30 mg/L, nearly 97.3% of tetracycline is decomposed. This study has great potential in the treatment of wastewater containing various antibiotics.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2022
·
IF 10.383
Shuangquan Lai,Yong Jin,Liangjie Shi,Rong Zhou,Yupeng Li
Hydrogels capable of optical switching have recently become one of the most celebrated materials for information encryption and anti-counterfeiting. However, challenges still remain for developing versatile gel-based platforms with on-demand multistage patterning and multi-dimensional encryption capacities as well as long-term stability. Herein, elaborately designed programmable and multifunctional gels with fascinating anti-swelling (swelling ratios < 0.1%), anti-freezing (below −70 °C), and anti-dehydration (over 3 months) abilities, solvent-induced reversible transparence variations, adjustable fluorescence, self-healing (86% in stress and 94% in strain), Fe3+-ethylenediaminetetraacetic acid disodium (EDTA·2Na)-induced reversible shape memory, and fluorescence off/on switch capabilities are facilely fabricated based on glycidyl methacrylate functionalized graphene quantum dots and Al3+ cross-linked gelatin and polyacrylic acid. Employing a simple mask photopolymerization or welding technique, various patterns can be readily and hierarchically encrypted on-demand into a single gel label, which can be further fixed into complex multi-dimensional architectures while quenching fluorescence after the treatment with Fe3+ to achieve high-security-level information encryption originating from the synergistic effects of the above multifunctions. The encrypted multi-level information can only be stepwise decrypted by an authorized individual who has mastered all decryption keys. Therefore, the creative design strategy for programing multifunctional gels opens up the possibility for hierarchical and multi-dimensional information encryption and anti-counterfeiting.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RHEOLOGICA ACTA
·
2022
·Vol. 61
·期 3
·229-242
·
IF 2.824
Stadler Florian J.,Cui Shuming,Hashmi Saud,Handschuh-Wang Stephan,Li Wenqiang,Wang Shichang,Yan Zhi-Chao,Zhu Guangming
In the last years, the 3iTT protocol—a dynamic-mechanical test (DMT) at low deformation and constant frequency, followed by a start-up flow (SUF) at constant shear-rate, and a DMT—was developed as an alternative to check for changes in material behavior, which was extended to form the multiple interval thixotropic test protocol (miTT), differing in modifying the shear rates systematically. The results of this test routine are a viscosity function η( \(\dot{\gamma }\) ) with increasing and decreasing \(\dot{\gamma }\) and the dependence of G’ and G” on \(\dot{\gamma }\) previous test . More importantly, the G’ and G” are strongly influenced by the previously applied shear rate. While regular emulsions show a decrease of G’ and G” upon a higher shear rate \(\dot{\gamma }\) in the previous shear step, the pickering emulsions with graphene oxide show an increase. In both cases, the change is approximately reversible. The changes in G’ and G” correlate well with the emulgel composition.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Science
·
2023
·Vol. 10
·期 20
·2207250
·
IF 15.1
Xue Bai,Mengyao She,Yali Ji,Zhe Zhang,Wenhua Xue,Enzhou Liu,Kerou Wan,Ping Liu,Shengyong Zhang,Jianli Li
Photocatalysis is an important technique for synthetic transformations. However, little attention has been paid to light-driven synergistic redox reactions for directed synthesis. Herein, the authors report tunable oxidation of benzyl to phenylcarbinol with the modest yield (47%) in 5 h via singlet oxygen ( 1 O 2 ) and proton-coupled electron transfer (PCET) over the photocatalyst Zn 0.5 Cd 0.5 S (ZCS)/graphene oxide (GO) under exceptionally mild conditions. Theoretical calculations indicate that the presence of S vacancies on the surface of ZCS/GO photocatalyst is crucial for the adsorption and activation of O 2 , successively generating the superoxide radical ( • O 2 − ) and 1 O 2 , attributing to the regulation of local electron density on the surface of ZCS/GO and photogenerated holes (h + ). Meanwhile, accelerated transfer of photogenerated electrons (e − ) to GO caused by the π – π stacking effect is conducive to the subsequent aldehyde hydrogenation to benzyl alcohol rather than non-selective oxidation of aldehyde to carboxylic acid. Anisotropic charge transport driven by the built-in electric field can further promote the separation of e − and h + for multistep reactions. Promisingly, one-pot photocatalytic conversion of p -xylene to 4-methylbenzyl alcohol is beneficial for reducing the harmful effects of aromatics on human health. Furthermore, this study provides novel insights into the design of photocatalysts for cascade reactions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.7
Yu Rong,Zhenghui Zhao,Qinyou An,Quanling Yang,Chuanxi Xiong
Aqueous zinc-ion batteries (AZIBs) have emerged as attractive alternatives to conventional lithium-ion battery systems, owing to their high theoretical capacity, inherent safety, environmental benignity, and cost effectiveness. However, the long-term stability and practical viability of zinc-ion batteries are impeded by dendritic zinc deposition and concurrent hydrogen evolution reaction (HER). Here, a 2,2,6,6-tetramethyl piperidinyl-1-oxyl (TEMPO)-oxidized cellulose nanofibril/reduced graphene oxide (TOCN/rGO) interlayer was constructed, which can contribute to effective regulation of Zn 2+ diffusion along the two-dimensional pathway and isolate Zn anode from water to uniformly guide zinc ions deposition and inhibit the undesirable HER. Compared with bare Zn, the TOCN/rGO@Zn symmetrical battery demonstrates stable cycling performance for over 1000 h at current densities of 0.5 and 2 mA cm −2 , while maintaining an exceptionally low overpotential (50 mV). When paired with an MnO₂ cathode, the assembled full cell maintains stable electrochemical performance and remarkable rate capability over repeated cycling. This strategy effectively alleviates dendritic zinc growth and suppresses HER during cycling, thereby offering an alternative pathway toward the practical application of AZIBs.
✓ 已验证
产品关联
DOI
高影响因子