Small
·
2022
·Vol. 19
·期 7
·2206231
·
IF 15.153
Zi Qiao,Jie Ding,Chengheng Wu,Ting Zhou,Kai Wu,Yusheng Zhang,Zhanwen Xiao,Dan Wei,Jing Sun,Hongsong Fan
The past decades have witnessed the rational design of novel functional nanomaterials and the potential to revolutionize many applications. With the increasing focus on electronic biological processes, novel photovoltaic nanomaterials are highly expectable for empowering new therapeutic strategies such as establishing a link between endogenous electric field (EEF) and electrotherapy. Compared to traditional invasive stimulation, the light-initiating strategy has the advantages of non-invasion, non-power supply, and precise controllability. Whereas, common photoactivated materials require short-wavelength light excitation accompanied by poor tissue penetration and biohazard. Herein, by the construction of p-n heterostructured Bi 2 S 3 /TiO 2 /rGO (BTG) nanoparticles, broadener light absorption and higher light conversion than regular UV excitation are realized. Simultaneously, the photoelectric performance of BTG heterostructure, as well as the synergistic effect of Bi 2 S 3 morphology, are revealed. Besides, the rationally designed biomimetic hydrogel matrix consisting of collagen and hyaluronic acid provides appropriate bioactivity, interface adhesion, mechanical matching, and electron transfer. Therefore, the photovoltaic BTG-loaded matrix provides a platform of light-driven electrical stimulation, coupling the EEF to modulate the electrophysiological and regeneration microenvironment. The implementation of photoelectric stimulation holds broad prospects for non-drug therapy and electrical-related biological process modulation including osseointegration, nerve regeneration, electronic skin, and wound healing.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Water Process Engineering
·
2022
·
IF 7.34
Qi Jing,Wenhui You,Shuo Qiao,Yuheng Ma,Zhongyu Ren
In this study, nano zero-valent iron-reduced graphene oxide (NZVI-rGO) was successfully synthesized and applied for 2,4-DCP and Cr (VI) removal. Characterization results show that NZVI particles were successfully loaded on rGO nanosheets increasing the dispersibility of particles. Removal experiments indicate that the existence of rGO significantly enhanced the removal efficiency of 2,4-DCP and Cr (VI) compared with bare nano zero-valent iron. The removal rate of 2,4-DCP and Cr(VI) increased from 33.24 % and 63.14 % to 100 % and 98.40 %, respectively. Pseudo-second-order model and Langmuir isotherm model could better explain the 2,4-DCP removal process. The removal mechanism of 2,4-DCP in the process of simultaneous removal is adsorption, including π-π interaction, hydrogen bonding and n-π EDA interaction between Cr(VI) and 2,4-DCP. Cr(VI) is firstly fixed on the surface of NZVI-rGO by electrostatic interaction. The electrostatic interaction between γ-FeOOH and Cr(VI) and the strong connection formed by n-π EDA interaction between Cr(VI) and 2,4-DCP promote the adsorption of Cr(VI) in coexisting system. Subsequently, Cr(VI) is reduced to Cr(III) by accepting the electrons donated by NZVI, and Cr(III) interacts with OH − in the solution to generate Cr(OH) 3 precipitate. The existence of rGO accelerates the rate of electron transfer to Cr(VI) in NZVI. This study provides theoretical support for remediation of combined pollution of chlorinated organics and heavy metals.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Aijuan Xie,Haoye Wang,Jiaqi Lin,Jie Pan,Menglu Li,Jiaojie Wang,Shixin Jiang,Shiping Luo
In the current study, bimetallic-organic gel (ZrFe-MOGs) were rapidly prepared without using any toxic or harmful organic solvent , and new bimetallic oxide ZrFeO x were prepared by roasting ZrFe-MOGs directly. Then ZrFeO x nanoparticles were combined with 3D RGO/MWCNTs by a solvothermal method to synthesize 3D RGO/MWCNTs@ZrFeO x hybrid. Due to its three-dimensional structure, large electroactive surface area and more active sites, and excellent conductivity, the electrocatalytic activity of the modified electrode for the oxidation of dopamine (DA) and paracetamol (PAT) was effectively improved, and the overlap of anode peak due to their closer electrochemical oxidation potentials was solved. Under optimal conditions, the linear responses to DA and PAT were in the range of 1 − 12 μM, 12 − 180 μM and 1 − 14 μM, 14 − 190 μM, respectively. The detection limits (S/N = 3) for DA and PAT were 0.230 and 0.212 μM, respectively. The optimized 3D RGO/MWCNTs@ZrFeO x has good reproducibility, repeatability, stability, selectivity, and can be used to detect DA and PAT simultaneously. In addition, the proposed RGO/MWCNTs@ZrFeO x sensor exhibited a good recovery factor in the analysis of real drug and serum samples with a relative standard deviation of less than 5 %. Importantly, the electroactive area of 3D RGO/MWCNTs@ZrFeO x , and the 2 H + /2e - mechanism of DA and PAT oxidation on the surface of 3D RGO/MWCNTs@ZrFeO x were discussed, which provided a theoretical basis for further understanding of this redox process .
✓ 已验证
产品关联
DOI
高影响因子
CARBON
·
2023
·
IF 10.9
Yuan Shu,Tingkai Zhao,Xianghong Li,abdul Jalil,Lei Yang,Guyue Feng,Yatao Li,Weiyu Jia,Fa Luo
To optimize the electromagnetic wave performance for absorbers, it is crucial to implement rational structural designs and integrate multiple loss modes in a coordinated manner. Here, three-dimensional (3D) porous macroscopic coral-like Co/CoO/reduced graphene oxide aerogels (Co/CoO/RGO), are successfully fabricated by an ice-templated freeze-drying and thermal reduction techniques, and their pore structures , involving aperture and total pore volume , are availably regulated by manipulating the water addition. The electromagnetic parameters and electromagnetic wave performance appear strong response toward the variation of pore structure. By controlling the pore structure, these parameters can be efficaciously tunned, thus manipulating the performance. The optimized absorption performance is obtained when the water addition is 1 ml, the minimum reflection loss reaches to −61.8 dB and the effective bandwidth is 4.2 GHz. Such good performance is inseparable with the 3D crosslinked conductive framework, the hybrid of magnetic and dielectric units, numerous heterointerfaces and countless pores walls in aerogels, which brings multiple electromagnetic wave loss mechanism. Moreover, it is very important that Co/CoO/RGO aerogels also integrate good hydrophobicity and heat insulation properties, allowing their application in harsh conditions. This work shows the potential of pore structural control engineering for producing multifunctional aerogels.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Yuan Shu,Tingkai Zhao,Jalil abdul,Xianghong Li,Lei Yang,Fa Luo
Addressing the growing issue of electromagnetic radiation calls for urgent exploration of effective electromagnetic wave absorbers. Herein, a series of coral-like Co/CoO nanoparticles/reduced graphene oxide (Co/CoO/RGO) hybrid aerogels were synthesized via a freeze drying-thermal reduction strategy. Their advantages involving porous interconnected framework, abundant heterogeneous interfaces, and integration of dielectric/magnetic units could bring multiple loss modes. By manipulating the Co(CO 3 ) 0.5 (OH)·0.11H 2 O (CCOH) addition and reduction temperature, the electromagnetic parameters could be tuned, ultimately resulting in optimal absorption capability with maximal reflection loss of –32.4 dB and effective bandwidth of 4.2 GHz. More importantly, excepting the high electromagnetic wave loss, Co/CoO/RGO hybrid aerogels also exhibit good hydrophobicity and thermal insulation properties, making them suitable for application in harsh environment. Besides, the special structure and multiple components lead to multiple heterointerfaces in aerogels, the resultant interface polarization is deemed to contribute to electromagnetic wave loss. Here, Density Functional Theory (DFT) simulation based on first-principles is adopted to verify the contribution of interface polarization from the theoretical level. According to the simulation results, the electron-occupied states near the Fermi level are significantly different among the different phases comprising the heterointerfaces, and there is a noticeable accumulation of charge at these interfaces, successfully affirming the interface polarization behavior at different interfaces.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2023
·
IF 4.8
Qian Wei,Yan Yan,Qingmei Ge,Mao Liu,Nan Jiang,Hang Cong,Jiang-Lin Zhao
A novel photoelectrochemical sensor was constructed by ternary layer-by-layer composites of reduced graphene oxide (rGO), graphitic carbon nitride quantum dots (g-C 3 N 4 QDs), and hemicucurbit[12]uril (HemiQ[12]), on the Indium-Tin Oxide (ITO) piece in sequence. Electrochemical Impedance Spectroscopy (EIS) was employed to confirm the successful assembly of the sandwich electrode, and the functionalization of each layer was explored by comparing of the currents with stepwise coating of the materials to achieve the synergistic enhancement of photoelectrochemical intensity. The application of proposed electrode was achieved by ultrasensitive sensing for chloramphenicol (CAP), which provided a limit of detection low to 0.089 nM, with high selectivity, good reproducibility and stability. The acceptable recoveries for the determination of CAP in real samples of honey and milk illustrated the feasibility of the established analytical method.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Research and Technology-JMR&T
·
2022
·
IF 6.267
Ruixiang Wang,Yanyang Wang,Yanhua Lu,Jiangfeng Zheng,Caini Zhong,Jiaming Liu,Jianjun Liu,Shubiao Xia
Constructing advanced nanostructures and combining various active materials are effective strategies to obtain high-performance anode materials for lithium-ion batteries (LIBs). Herein, we report a surface-coordinated polymerization method to synthesize ZIF-67 nanoparticles with a reuleaux tetrahedron morphology, and combine the electrostatic adsorption method and heat treatment, nitrogen-doped hollow porous Co 3 O 4 (HP-Co 3 O 4 /NC) nanoparticles were anchored on reduced graphene oxide (rGO) to obtain HP-Co 3 O 4 /NC@rGO composites. This deliberate structural design can significantly improve the electrochemical performance of lithium (Li) storage. When applied as an anode material in LIBs, HP-Co 3 O 4 /NC@rGO nanocomposite renders a reversible capacity of 809 mAh g −1 after 200 charge/discharge cycles at a current density of 1000 mA g −1 . The excellent electrochemical performance is mainly attributed to the synergistic effect of the hollow nanostructure and graphene network. A hollow nanostructure can provide abundant active sites and enhance structural stability. As a conductive network, graphene tightly wraps Co 3 O 4 , which can not only increase the electronic and ionic transport but also alleviates the volumetric changes of Co 3 O 4 during the charge/discharge process, thereby improving the rate performance and cyclic stability.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Xiangfeng Shu,SaiChao Yan,Bo Fang,Yenan Song,Zhenjie Zhao
We designed a promising three-dimensional (3D) nitrogen-doped reduced graphene oxide-based aerogel (NGA) with silver nanowires (Ag NWs) assisted self-supporting networks for enhanced electromagnetic wave (EMW) absorption. 3D AgNWs@NGAs (8–12 mg/mL) were synthesized by a three-step strategy of sonication, reduction, and lyophilization. The results show that introduced sp 3 defects and disordered sites in nitrogen doping from a rarely-reported liquid nitrogen source of acetonitrile remarkably improved electronic dipole polarization relaxation and EMW absorption ability. Besides, electronic band structure and density of states of the NGA were investigated by first-principles calculations to indicate that the carrier mobility became smaller during nitrogen doping. The Ag NWs were distributed on an NGA as the 3D network structure of an elastic support and a conductive and compatible unit, which limited the aggregation of NGA flakes, and further strengthened conductive loss. Significantly, the synthesized ultralight AgNWs@NGA exhibits excellent performance at 9.52 GHz, with a strong minimal reflection loss of –79.99 dB, a small thickness of 2.660 mm, a wide effective absorption bandwidth of 3.5 GHz, and an ultra-low filler content of 5 wt%. Furthermore, a large specific surface of 331.5 cm 3 /g, a good conductivity of approximately 50 S/cm, a high resilience, and an excellent heat insulation capability, guarantee the durable stability in EMW absorption of AgNWs@NGAs to resist distortion and heat attacks.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2022
·Vol. 12
·期 34
·21851-21858
·
IF 4.036
Nan Zhao,Lu Ren,Guangyi Du,Jing Liu,Xueqiu You
The rGO/CeO2/FTO nanocomposite modified electrode was prepared by an electrochemical method. A simple and highly sensitive electrochemical sensing platform for electrochemical rGO and modified CeO2 nanoribbons directly on FTO electrodes was developed. Simultaneous determination of Pb2+ and Cd2+ used the differential pulse anodic stripping voltammetry (DPASV) method. The method was simple to operate, and CeO2 nanobelts could be obtained simultaneously by electrodeposition and reduction of GO without further processing. This is an environmentally friendly electrochemical method to obtain modified electrodes under mild conditions. The experimental results showed that the linear calibration curves of Pb2+ and Cd2+ are 1–300 and 0.2–500 μg L−1, respectively. At the same time, no interference from other coexisting metal ions was found during the detection process, which proved that the modified electrode had good stability and repeatability.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2022
·
IF 10.319
Xiumei Chen,Na Xin,Yuxin Li,Cong Sun,Longhua Li,Yulong Ying,Weidong Shi,Yu Liu
The energy storage device has been urgently studied and developed to meet the increasing demand for energy and sustainable development. Due to the excellent conductivity of graphene and high performance of ZnCo 2 O 4 and NiCo 2 O 4 , we design a self-supporting electrode based on vertically grown two-dimensional/two-dimensional (2D/2D) NiCo 2 O 4 /ZnCo 2 O 4 hierarchical flakes on the carbon-based conductive substrate (NiCo 2 O 4 /ZnCo 2 O 4 @graphene/carbon nanotubes, NZ@GC). The density functional theory calculations indicate that the high OH − adsorption capacity of the NiCo 2 O 4 /ZnCo 2 O 4 nanosheets can significantly enhance the electrochemical reaction activity. NZ@GC shows a high capacitance of 1128.6 F g −1 at 1 A g −1 . The capacitance retains 84.0% after 6000 cycles even at 10 A g −1 . A hybrid supercapacitor is fabricated using NZ@GC and activated carbon, exhibiting a large energy density of 50.8 W h kg −1 at the power density of 800 W kg −1 . After 9000 charge/discharge cycles, the supercapacitor still has 86.1% capacitance retention. The NZ@GC film has showed the potential as promising electrodes in high efficiency electrochemical energy storage devices.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF PHYSICS D-APPLIED PHYSICS
·
2022
·Vol. 55
·期 23
·234002
·
IF 3.409
Lijuan Hou,Limin Zhang,Jinhao Zang,Weixia Shen,Taiyi Zhang,Xiaowen Huang,Huiyu Yuan,Dezhi Kong,Ye Wang,Xinjian Li,Tingting Xu
K0.8Ti1.73Li0.27O4 (KLTO) is an important titanium-based anode material for lithium-ion batteries (LIBs) and is expected to become an alternative to carbonaceous materials on account of its nontoxicity, low cost, and high safety performance. However, it suffers from poor specific capacity at high charge–discharge rates due to its low conductivity and obstructed Li-ion diffusion. In this work, an Fe-doped KLTO@rGO (Fe-KLTO@rGO) composite prepared by following a simple electrostatic assembly process and its high-rate and long-cycle-life-performance as an anode in LIBs is obtained. The Fe-KLTO@rGO composite sample has an excellent specific capacity of 330 and 105 mAh g−1 at a current density of 1 C (1 C = 175 mA g−1) and 50 C, respectively. In addition, the Fe-KLTO@rGO composite sample can carry out a long cycle of 3000 cycles at a rate of 50 C, and the specific capacity remains at 127 mAh g−1.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Physical Chemistry C
·
2023
·
IF 3.7
Ming Wang,Yue He,Wei Hong,Shi Yi Zhang,Chan Xu Yang,Ding Shen,Xiao Liang Wang,Cheng Yan
At present, the wide commercial application of Li4Ti5O12 (LTO) is limited as an anode for lithium-ion batteries because of its poor conductivity and lower rate performance. In this paper, LTO nanoparticles were embedded in a reduced graphene oxide (rGO) conductive network by an in situ electrostatic self-assembly effect using a simple hydrothermal reduction method. The microstructure and electrochemical performance of the LTO/rGO composite were investigated. The highlighted results showed that LTO nanoparticles were combined with rGO nanosheets by a Ti–O–C covalent bond, which was more stable than other bonding methods. At the same time, the addition of rGO not only enriches the structure and increases the specific surface area but also effectively prevents the agglomeration of LTO. The higher conductivity of LTO nanoparticles was bestowed by the rGO three-dimensional (3D) network, causing structural stability and high electrochemical performance. The LTO/rGO composite has high first discharge capacity (643.9 mAh/g at 0.5C), remarkable rate performance (290 mAh/g at 10C), and excellent cycle stability (271.7 mAh/g after the 1000th cycle at 10C) when tested in a half battery. Furthermore, it has higher discharge capacity (181.8 mAh/g at 1C, the first Coulombic efficiency was 90.1%) and excellent cycle stability (142.8 mAh/g after 500 cycles at 20C) when assembled into a full battery as the anode with commercial LiFePO4 (LFP) as the cathode. The lithium storage mechanism of the LTO/graphene composite was further discussed by first-principles calculations. With the addition of graphene to LTO, the electron transport ability was improved and the diffusion energy barrier was reduced. This made the composite expected to become a promising anode material for lithium-ion batteries.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）