Journal of Materials Chemistry A
·
2026
·
IF 9.2
Yunqi Zhang,Tianyu Zhang,Yifei Ye,Xinmeng Xu,Wenjuan Xiang,Xiubing Huang,Ge Wang
The development of catalytic activity for non-noble metals at low temperature features significant value for green chemical production with high economic interest. This work has successfully customized a series of ligand-functionalized and hierarchically porous Ce-UiO-66-X (HP-U(Ce)-X, -X= -NH2, -H, -NO2, -Br) as supports through the soft template methods, achieving the organic combination of bifunctional structures, providing abundant mesoporous channels for high exposure of guest Ni sites and efficient mass transfer of reaction substrates. The presence of electron-withdrawing/donating groups also facilitates electronic structure modification of Ni species. Therefore, with the selection of optimal -Br and synergistic improvement of mesoporous structures by formic acid (FA) and nitric acid (HNO3), Ni loaded on HP-U(Ce)-Br-6-4 obtains the lowest electron density and outstanding accessibility, reaching 100% conversion of dicyclopentadiene (DCPD) and ~100% selectivity for tetrahydrodicyclopentadiene (THDCPD) in only 30 min at 70 ℃ (while selectivity up to 95% at 60 ℃). This study provides new insight and guidance for performance modulation of non-noble metal based catalysts and rational integration of multifunctional structures in porous materials.
✓ 已验证
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2020
·
IF 9.038
Weixia Yang,Meijie Cheng,Yong Han,Xueli Luo,Chunhua Li,Wenzhi Tang,Tianli Yue,Zhonghong Li
Here, inspired by the poisoning process of heavy metal in human body that the accidental ingested heavy metal can anchor to the functional groups of DNA/protein/enzyme to exert their toxicities during the rapid blood circulation, we developed the adsorbent that enveloped Etched UiO-66 with abundant functional groups into chitosan (CTS) aerogel to capture Pb(II) and Cd(II) in aqueous and apple juice. SEM, XRD and FTIR spectra were used to characterize the Etched UiO-66/CTS aerogel. The results showed that Etched UiO-66/CTS aerogel has a three-dimensional porous structure, and –OH groups of CTS interact with Zr(IV) of Etched UiO-66 to form the stable UiO-66/CTS aerogel. Benefiting from the intrinsic properties of porous and abundant functional groups, Etched UiO-66/CTS aerogel exhibits satisfactory adsorption capacities of 654.9 mg g −1 for Pb(II) and 343.9 mg g −1 for Cd(II) at 45 °C. Moreover, the aerogel shows excellent removal efficiencies of 98.21% for Pb(II) and 98.70% for Cd(II) with initial concentration of 1.0 mg L −1 in apple juice with little effect on the quality of apple juice. This strategy of mimetic heavy metal ions’ poisoning behavior opens up a new avenue for the removal of heavy metal ions in complex matrices.
研究领域:
环境科学
·
材料科学
·
吸附技术
·
食品安全
·
纳米材料
✓ 已验证
DOI
高影响因子
Journal of Cleaner Production
·
2023
·
IF 11.1
Miaolu He,Yushuang Li,Leihao Feng,Jiaqi Wang,Ze Liu,Lei Wang,Jin Wang,Rui Miao,Xudong Wang
The traditional thin-film composite (TFC) forward osmosis (FO) membrane has problems such as poor water permeability and low lithium concentration selectivity because the separation layer is too thick and has many defect pores. In this study, a thin and dense separation layer was obtained by constructing a sodium alginate (SA)/UiO-66-NH 2 interlayer to control the attachment amount and diffusion rate of m-phenylenediamine (MPD), which enhanced the performance of the membrane. This paper studies the effect and mechanism of the interlayer on the structure and separation performance of the FO membrane, and explores the lithium ion concentration performance of the interlayer membrane. According to the results, based on the strong interaction between the interlayer and MPD, the equilibrium concentration of MPD available for interfacial polymerization was increased and the diffusion rate of MPD was slowed, resulting in the generation of a thin and dense separation layer. Since the interlayer restricted the escape of bubbles formed in the interfacial polymerization, the separation layer showed a leaf-like structure with increased filtration area and water storage space. Due to the reduced thickness of the separation layer and its leaf-like structures, the water flux increased significantly, and the water flux of the interlayer membrane was 47.9% greater than that of the original membrane. Drawing upon the heightened density of the separation layer and secondary separation of the interlayer, the reverse solute flux was lowered by 37.4%. The interlayer membrane exhibited efficient Li + rejection (R>93%) and the concentration ratio of Li + was close to its theoretical concentration ratio at 1.46 ± 0.03.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2023
·
IF 7.7
Wenjun Qu,Huili Wang,Guodong Li,Zhaoping Song,Xiaona Liu,Fengshan Zhang,Wenxia Liu,Dehai Yu,Dandan Ji
The removal of heavy metal ions and medical antibiotics from wastewater is crucial for environmental protection and human health. However, the adsorption capacities and reusability of previously reported adsorbent materials have been insufficient for efficient and sustainable wastewater treatment . In this study, we present a composite material, UiO-66-AMP@PAN, synthesized from metal-organic frameworks (MOFs) and polyacrylonitrile (PAN), which exhibits superior adsorption properties and reusability. The material demonstrates excellent adsorption capacities for heavy metal ions Pb(II) and Cr(VI) as well as the antibiotic tetracycline hydrochloride (TCH), among which the maximum adsorption capacities for Pb(II)(pH=7) and Cr(VI)(pH=5) and antibiotic tetracycline hydrochloride (TCH) (pH=9) were 455.8 mg/g, 442.08 mg/g and 405.92 mg/g, respectively. The adsorption efficiency of UiO-66-AMP@PAN as an adsorbent for adsorbing Pb(II)(pH=7) and Cr(VI)(pH=5) and the antibiotic tetracycline hydrochloride (TCH) (pH=9) remained above 90% even after ten consecutive cycles. The performance of UiO-66-AMP@PAN as an adsorbent has remained unchanged across multiple adsorption-desorption cycles, demonstrating its potential for long-term use in wastewater treatment applications. This innovative approach paves the way for the development of more efficient and environmentally friendly adsorption materials to address the challenges posed by heavy metal ions in wastewater and medical antibiotics.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2022
·
IF 5.518
Rui Zhang,Ziyin Chen,Yu Li,Chen Zhao,Lu Cai,Junrong Yu,Ze Yang,Jiacheng Jiang
The unique properties of MOFs make them the best candidates for catalytic and photocatalytic applications. In this research, the NH 2 -UiO-66 material was prepared by solvothermal method , and different content of NH 2 -UiO-66 was added before the composite growth of Bi 2 S 3 and BiOBr nanomaterials to obtain the NH 2 -UiO-66/BiOBr/Bi 2 S 3 ternary composite material. In order to investigate the relationship between the structure and properties of the catalyst, XRD , FT-IR, SEM , HRTEM , UV–vis DRS, XPS and other characterization technologies were used to analyze the structure, morphology, optical properties of the samples, showing that NH 2 -UiO-66/BiOBr/Bi 2 S 3 have been successfully synthesized. Their photocatalytic performance was evaluated based on the photocatalytic degradation of tetracycline hydrochloride and rhodamine B under visible light . The results show that 2% NH 2 -UiO-66/BiOBr/Bi 2 S 3 has better photocatalytic activity than other materials. Moreover, NH 2 -UiO-66/BiOBr/Bi 2 S 3 also demonstrated good photocatalytic reusability and stability. The formation of Bi 2 S 3 and BiOBr heterojunctions and the introduction of NH 2 -UiO-66 with more active sites increase the carrier performance and separation efficiency. Then the valence band and conduction band values of the semiconductor material are calculated through the M-S curve, combined with the forbidden bandwidth deduced by UV–vis DRS and the experimental results of radical trapping, a double Z-type electron transfer mechanism suitable for this system is inferred. Finally, taking RhB as an example, the degradation path of dye pollutants was studied.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Ning Zhang,Dan Li,Mengyao Mu,Minghua Lu
Increasing the stability of materials and affinity to the target has always been the pursuit. In this paper, the strategy of partially fluorinated metal–organic framework materials (MOFs) was introduced into the field of sample preparation for the first time, and the potential of this method to prepare materials with improved stability and extraction performance against environmental pollutants was verified. The UiO-66-(NH 2 ) 0.58 (4F) 0.42 coating was successfully prepared on carboxyl functionalized stainless steel fiber through covalent bonding method. Owing to the introduction of F element, the UiO-66-(NH 2 ) 0.58 (4F) 0.42 coating exhibited enhanced metal node acidity, hydrophobicity and stability, thus its extraction performance for phthalates (PAEs) was higher than that of pure UiO-66-NH 2 and commercial fiber coatings. The UiO-66-(NH 2 ) 0.58 (4F) 0.42 -coated fiber was coupled with GC–MS to detect PAEs, and the wide linear range (0.03–1000 ng/L), good correlation coefficients (0.9732–0.9998) and low detection limit (0.0039–0.016 ng/L) were obtained. The established method had also been successfully applied to detection of trace PAEs in plastic bags packed milk and bottled liquor with satisfactory recoveries (83.7 ± 5.1–118.1 ± 4.1 %). This research provides a new path for the preparation of environmental pollutant enrichment and removel materials with good performance.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Water Process Engineering
·
2022
·
IF 7.34
Lin Chen,Fangqing Li,Longjie Jiang,Fudong He,Yufei Wei
Polytetrafluoroethylene (PTFE) hydrophobic membranes used in direct contact membrane distillation (DCMD) processes were prone to fouling and wetting by oil and surfactants, which hampered their broad industrial application. In this work, a new Janus composite membrane was developed by modifying UiO-66-NH 2 with polyvinyl alcohol (PVA) as a cross-linking agent and immobilizing the modified UiO-66-NH 2 on the PTFE membrane by vacuum filtration. By tuning the ratio of PVA to MOF , an optimally proportioned Janus membrane was obtained, and its performance was tested in DCMD experiments through the use of a sodium chloride feed solution containing hexadecane and sodium dodecyl sulfate. The top layer of this Janus membrane exhibited underwater oleophobicity (130.1 ± 0.96°) and hydrophilicity in the air (54.0 ± 0.92°), while the bottom layer is hydrophobic (132.3 ± 0.97°). Compared to the pristine PTFE membrane, the modified Janus membrane demonstrated promising resistance to both membrane fouling and wetting of oils and surfactants. The desalination rate of 99.99% was still achieved within 24 h with the conductivity remaining lower than 10 μS/cm and the flux maintained at 21.3 L/(m 2 ·h). As a result, the Janus composite membrane developed in this study was shown to be a prospective alternative for treating wastewater containing oily substances and surfactants in a resourceful manner.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Lan Ding,Fenghua Bai,Burenbayaer Borjigin,Yuning Li,Huiqin Li,Xiaojing Wang
Solar-energy-driven CO 2 conversion into valuable chemical fuels holds great renewable potential. However, most photocatalysts' weak CO 2 adsorption limits more artificial photosynthesis for further utilization. Herein, we present an in situ assembling approach to produce stable Cs 2 AgBiBr 6 /Ce-UiO-66-H composite, in which a tight contact interface between the two participated components was constructed. Benefiting from the photocatalytic properties and high adsorption capacity for CO 2 , the optimized 20Cs 2 AgBiBr 6 /Ce-UiO-66-H adsorption-photocatalyst exhibits outstanding performance for reductive CO 2 deoxygenation with considerable CO generation rate (309.01 μmol g −1 h −1 ) under simulated solar light irradiation with 300 W Xe lamp, which is about 2.1 and 2.7 times than that of pure Cs 2 AgBiBr 6 and Ce-UiO-66-H, respectively. The excellent catalytic conversion of CO 2 is ascribed to the effective solar harvest and quickly photo-excited carriers’ separation in such assembled architecture. Importantly, due to the in-situ synthesis, Cs 2 AgBiBr 6 QDs are intercalated in the Ce-UiO-66-H frameworks and it could lead to improved stability and induce abundant oxygen vacancies in Cs 2 AgBiBr 6 /Ce-UiO-66-H, which can maintain unchangeable CO 2 conversion rate under wet air with consecutive ten hours of the recycling test. In this work, the combining metal–organic frameworks and lead-free halide perovskite provide great potential for artificial photocatalytic CO 2 -to-CO conversion under a mild gas–solid reaction condition via utilizing solar energy.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Yuxin Mei,Nicui Yuan,Yating Xie,Yaping Li,Baining Lin,Yonghua Zhou
NH 2 -UiO-66 is recently regarded as a potential photocatalyst for CO 2 reduction reaction due to the high CO 2 adsorption capacity, high UV–vis light absorption capacity and chemical stability. Aiming to further improve its activity, in this paper, a composite of NH 2 -UiO-66 and CeCO 3 OH (NU/CC) was fabricated via an in-situ growth method of NH 2 -UiO-66 on CeCO 3 OH. The X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and electron spin resonance (ESR) characterizations indicated that a direct Z-scheme heterojunction between CeCO 3 OH and NH 2 -UiO-66 was formed via the formation of O-Zr-CO 3 2- bond. The CO 2 adsorption measurement, UV–vis DRS spectra and photo(electro)chemical measurements indicated that the optimal composite NU/CC-1.6–90 exhibited the higher CO 2 adsorption capacity, stronger respond and wider absorption range to UV–vis light, as well as the significantly delayed recombination of photogenerated electron-hole pairs, compared with other control samples. As a result, NU/CC-1.6–90 delivered the obviously enhanced photocatalytic activity of CO 2 to both CO and CH 4 , and the rate of electron consumption reached 152.8 μmol/g h, 5-fold of that of NH 2 -UiO-66.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2022
·
IF 9.136
Shi-Wen Lv,Xiaoran Wang,Xing Wei,Yi Zhang,Yanqing Cong,Lin Che
Nowadays photocatalysis assisted advanced oxidation processes exhibited a great application prospects in pollution control. Herein, for the first time, a series of transition metal modified UiO-66-NH 2 (namely Fe-UiO-66-NH 2 , Co-UiO-66-NH 2 and Ni-UiO-66-NH 2 ) were synthesized via a simple method. After that, these functional materials were employed as photocatalyst to activate PMS for degrading BPA under visible light irradiation. Significantly, prepared Fe-UiO-66-NH 2 exhibited the highest photocatalytic activity among these samples. More importantly, proposed Fe-UiO-66-NH 2 /PMS/light oxidation system showed excellent degradation ability for various organic pollutants, including BPA, TC, OFX, IBP as well as SMX. Owing to the occurrence of d-d transitions after the coordination of transition metal ions, UiO-66-NH 2 displayed the enhanced utilization efficiency of visible light. Furthermore, introduced Fe ion as a mediator could boost the charge transfer by the cluster-to-metal way, thereby effectively inhibiting the recombination of photogenerated electrons and holes. In addition, embedding cluster-to-metal charge transfer in UiO-66-NH 2 modified the band structure, and both SO 4 −• and OH were major active species in the photocatalytic reaction system. Developed Fe-UiO-66-NH 2 /PMS/light oxidation system with good stability also presented great antibacterial performance. To sum up, current work could provide some novel inspirations for designing the high-efficiency photocatalyst.
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2022
·
IF 5.876
Hao Wang,Shuai Wang,Shixing Wang,Libo Zhang,Yang Zhou,Fan Yang
In the past decades, due to the worst effect of hexavalent chromium on human and environmental health, people have been committed to removing hexavalent chromium from industrial wastewater. In recent years, metal organic frameworks (MOFs) adsorbents have attracted more and more attention in the removal of pollutants from water. Here, an efficient and selective adsorbent(UiO-66-PRAA) was prepared by modified UiO-66-NH 2 with phenothiazine-N-rhodanine to remove Cr(VI) ion from wastewater. The maximum absorption capacity of UiO-66-PRAA at 303 K and pH = 2 was 333.67 mg/g for Cr(VI). Which is higher than that of bare UiO-66-NH 2 . Elovich kinetic and Sips isotherm models are more suitable for describing the adsorption process of Cr(VI) on UiO-66-PRAA, which indicates that the process is a chemically controlled multilayer adsorption. In addition, the removal mechanisms include chelation, ion exchange and reduction. The adsorbent still shows good adsorption performance under the coexistence of different ions. The excellent cycle performance of UiO-66-PRAA confirms its high potential in removing Cr(VI) from polluted water. In general, UiO-66-PRAA has been shown well adsorption properties and reusability, and our finding might provide a new idea for developing efficient and reusable adsorbent to remove Cr(VI) from wastewater.
✓ 已验证
产品关联
DOI
高影响因子
Analytical Methods
·
2022
·Vol. 14
·期 24
·2423-2430
·
IF 3.532
Juan Du,Kai Liu,Jialei Liu,Dianbo Zhao,Yanhong Bai
Listeria monocytogenes (L. monocytogenes) is one of the most lethal pathogenic bacteria. Although the traditional microbial culture method has high sensitivity and selectivity for the diagnosis of L. monocytogenes, it is time-consuming and not suitable for on-site detection. A rapid, convenient and visualized on-site detection method is particularly needed. In this work, Fe3O4@UiO-66-NH2 was prepared for both magnetic separation and lateral flow immunoassay (LFIA) for the detection of L. monocytogenes by taking advantage of the easy separation of the magnetic core Fe3O4 and the high surface area of the outer layer UiO-66-NH2. Fe3O4@UiO-66-NH2 with a high surface area and good water-dispersibility and optical properties was synthesized by a simple hydrothermal process. It could directly adsorb on the surface of target bacteria and form Fe3O4@UiO-66-NH2-bacteria conjugates, without the labeling of an antibody. After magnetic separation and concentration, the Fe3O4@UiO-66-NH2-bacteria conjugates were detected by the antibody on the test line of the LFIA strip, resulting in a visible orange band. The capture efficiency and LFIA detection of Fe3O4@UiO-66-NH2 were optimized in this study. Under the optimal conditions, a good linear correlation between the test line intensity and the concentration of L. monocytogenes was obtained in the range of 105–108 CFU mL−1, and the limit of detection was 2.2 × 106 CFU mL−1 by the naked eye. The Fe3O4@UiO-66-NH2-based LFIA strip showed strong specificity for L. monocytogenes, and the detection took 45 min without culture enrichment. Therefore, the proposed Fe3O4@UiO-66-NH2-based strip showed the advantages of simple synthesis, being label-free, low cost, good selectivity and convenience.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）