MICROCHIMICA ACTA
·
2017
·Vol. 184
·期 3
·951-959
·
IF 4.58
Zhang Yuhuan,Wang Yanru,Zhu Wenxin,Wang Jing,Yue Xiaoyue,Liu Wei,Zhang Daohong,Wang Jianlong
The capability of multi-level logic operations in biological diagnosis is far from being fully realized. In particular, the simplification of logic judgments to realize rapid, on-site complex diagnoses is still a key issue in bioelectronics. The authors here describe the construction of a colorimetric multilevel DNA circuit that incorporates two IMPLY gates and a sample extraction technology (SET) with anti-BPA aptamer as a co-recognizing element and the color of gold nanoparticles as the output signal. The circuit can perform multi-bioanalysis of the plasticizers and hormone mimetics bisphenol A (BPA) and bisphenol S (BPS). The assay is based on the finding that the aptamer against BPA can recognize both BPA and BPS. This DNA logic detection system is simple, fast, sensitive and selective because of the utilization of a co-recognition element which decreased input numbers. This, in turn, cascades multiplex Boolean logic gates and simplifies the diagnostic challenge. Both BPA and BPS can be determined by photometry at 620 nm, the limit of detection being 1.5 ng⋅mL −1 for BPA and 1.3 ng⋅mL −1 for BPS. Application to (spiked) water samples shows good analytical performance in terms of recovery (95.4 to 106.8%), linear range (4.4 to 66 ng⋅mL −1 for BPA, 2.5 to 75 ng⋅mL −1 for BPS) and correlation coefficients (>0.98). In our perception, the method represents a simple route for the fabrication of colorimetric multi-level DNA circuits. It may shorten the gap between bioelectronic logic circuits and high throughput real sample analysis.
Illustration of sample extraction treatments (SET) of bisphenol A (BPA) and bisphenol S (BPS) and the three-input IMPLY1-IMPLY2 logic operation with BPA, BPS and anti-BPA aptamer as inputs.
✓ 已验证
产品关联
DOI
高影响因子
MACROMOLECULAR RAPID COMMUNICATIONS
·
2017
·Vol. 38
·期 5
·1600745
·
IF 4.265
Wei Yuan,Weiwen Chi,Ruimin Liu,Hongkun Li,Yongfang Li,Ben Zhong Tang
Two soluble poly(phenyltriazolylcarboxylate)s (PPTCs) with high molecular weights ( M w up to 26 800) are synthesized by the metal-free 1,3-dipolar polycycloadditions of 4,4′-isopropylidenediphenyl diphenylpropiolate ( 1 ) and tetraphenylethene-containing diazides ( 2 ) in dimethylformamide at 150 °C for 12 h in high yields (up to 93%). The resultant polymers are soluble in common organic solvents and are thermally stable with 5% weight loss temperatures higher than 375 °C. The PPTCs are nonemissive in solutions, but become highly luminescent upon aggregation, showing a phenomenon of aggregation-induced emission. Their aggregates can be used as fluorescent chemosensors for high-sensitivity detection of explosives.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2017
·Vol. 24
·期 8
·7042-7050
·
IF 2.741
Zhang Dai,Zhou Lifang,Lei Yajing,Zhou Zhan,Zhou Jie,Chen Shuqing
Diethylstilbestrol (DES) is used as a kind of animal feed additive and affects people’s health through the food chain. The purpose of this study is to detect the residue level of DES in 576 human urine samples directly. DES-BSA was used to immunize Balb/c mice. The monoclonal antibody was produced by hybridoma that was screened through cell fusion techniques. Finally, we developed the indirect competitive ELISA method to analyze 576 human urine samples from Zhejiang Province, China. The IC 50 of this method was 3.33 ng/mL. The LOD and LOQ were 0.16 and 0.54 ng/mL. Linear range of the standard curve was from LOD to 12.50 ng/mL. There was no cross-reactivity with two kinds of estrogens and two structural analogs with DES. Five hundred seventy-six urine samples were analyzed by the indirect competitive ELISA method, and the detection rate was 98.78%. The mean concentration and geometric mean were 4.70 and 3.50 ng/mL. The indirect competitive ELISA method based on monoclonal antibody was sensitive and reliable for the detection of DES in human urine samples. The results warned us to pay more attention to human health and food safety.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2017
·Vol. 409
·期 8
·2239-2246
·
IF 3.431
Zhang Jie,Zhang Tiehua,Guan Tianzhu,Yu Hansong,Li Tiezhu
Widespread use of bisphenol A (BPA) and other bisphenol analogues has attracted increasing attention for their potential adverse effects. As environmental endocrine-disrupting compounds (EDCs), bisphenols (BPs) may activate a variety of nuclear receptors, including glucocorticoid receptor (GR). In this work, the binding of 11 BPs to GR was investigated by fluorescence polarization (FP) assay in combination with molecular dynamics simulations. The human glucocorticoid receptor was prepared as a soluble recombinant protein. A fluorescein-labeled dexamethasone derivative (Dex-fl) was employed as tracer. Competitive displacement of Dex-fl from GR by BPs showed that the binding affinities of bisphenol analogues were largely dependent on their characteristic functional groups. In order to further understand the relationship between BPs structures and their GR-mediated activities, molecular docking was utilized to explore the binding modes at the atomic level. The results confirmed that structural variations of bisphenol analogues contributed to different interactions of BPs with GR, potentially causing distinct toxic effects. Comparison of the calculated binding energies vs. experimental binding affinities yielded a good correlation ( R
2 = 0.8266), which might be helpful for the design of environmentally benign materials with reduced toxicities. In addition, the established FP assay based on GR exhibited the potential to offer an alternative to traditional methods for the detection of bisphenols.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2016
·
IF 3.926
Lingling Wang,Zhenzhen Zhang,Jing Zhang,Lei Zhang
The synthesis of a magnetic nanoporous three dimensional graphene (3DG) / ZnFe 2 O 4 composite has been achieved. Through formation of graphene hydrogel, ZnFe 2 O 4 magnetic particles was successfully introduced into the nanoporous 3DG, resulting in a magnetic porous carbon material. The morphology, structure, and magnetic behavior of the as-prepared 3DG / ZnFe 2 O 4 were characterized by using the techniques of SEM, XRD, BET, VSM, FTIR, Raman and TGA. The 3DG / ZnFe 2 O 4 has a high specific surface area and super paramagnetism. Its performance was evaluated by the magnetic solid-phase extraction of nine bisphenol analog s (BPs) from water samples followed by HPLC analysis, and showed excellent adsorption capability for the nine target compounds. Under optimized condition, the lower method detection limits (0.05–0.18 ng mL −1 ), the higher enrichment factors (800 fold) and good recoveries (95.1–103.8%) with relative standard deviation (RSD) values less than 6.2% were achieved. The results indicated that the developed method based on the use of 3DG / ZnFe 2 O 4 as the magnetic adsorbent has the advantages of convenience and high efficiency, and can be successfully applied to detect the nine BPs in real water samples.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2016
·
IF 4.758
Tianrong Zhan,Yang Song,Zhengwei Tan,Wanguo Hou
In the present work, the ultrathin exfoliated Ni 2 Al layered double hydroxide (ELDH) nanosheets were prepared by using l -asparagine as pre-intercalator in aqueous medium . The transmission electron microscopy and atomic force microscopy images displayed that ELDH nanosheets had lost the original hexagon of hydrotalcite with about 200 nm lateral size and less than 3 nm thickness. Then a sensitive electrochemical sensor was fabricated for bisphenol A (BPA) detection based on ELDH modified glassy carbon electrode with aid of film-forming agent chitosan. The proposed sensor showed an efficient electrocatalytic performance on the oxidation of BPA with the enhanced oxidation response and the lowered oxidation overpotential (0.489 V). Differential pulse voltammetry (DPV) was employed for the determination of BPA with a wide linear range from 0.02 to 1.51 μM. The detection limit was calculated as 6.8 nM (S/N = 3). The resultant sensor exhibited good reproducibility, selectivity and acceptable stability due to the contribution of the more active sites and the large surface area from ELDH nanosheets. Additionally, the concentrations of BPA in milk samples were analyzed by this developed method with an acceptable result.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2017
·
IF 0
Mantang Chen,Lihua Zhu,Yuan Zhang,Jing Zou,Heqing Tang
Bifunctional materials having both good catalytic and adsorptive performances are promising in the field of wastewater treatment. Cobalt-encapsulated and nitrogen-doped bamboo-like carbon nanotubes (Co/N-CNTs) were prepared by a simple method of calcination and acid treatment with Co 3 [Co(CN) 6 ] 2 as a precursor. Based on a series of characterization and performance studies, Co/N-CNTs were confirmed to be able to function as both a catalyst and an adsorbent for oxidative degradation of organic pollutants in the presence of peroxymonosulfate (PMS). When rhodamine B was used as a typical dye pollutant, it was found that all the added pollutant (10 mg L −1 ) was completely removed in 7 min by using 0.1 g L −1 Co/N-CNTs and 0.2 g L −1 PMS. The fast and efficient degradation of the pollutant was attributed to the synergistic effect between adsorption and catalysis on the surface of Co/N-CNTs. It was confirmed that this bifunctional material provided good performances in a wide range of operation conditions, such as a wide temperature range and a wide pH range. Co/N-CNTs also exhibited a good recyclability . A mechanism study indicated that the main active species in the catalytic oxidation process was surface-bound SO 4 − and OH.
✓ 已验证
产品关联
DOI
JOURNAL OF SOILS AND SEDIMENTS
·
2017
·Vol. 18
·期 3
·845-851
·
IF 2.522
Guan Tianzhu,Sun Yonghai,Zhang Tiehua,Li Tiezhu,Li Zhuolin,Zhang Yue,Zhang Jie,Wang Yongjun
Purpose Extensive use of bisphenol A (BPA) and its analogues has caused increasing concern over the potential adverse health impacts of these chemicals. The aim of this study was to develop a fluorescence polarization (FP) assay to detect bisphenol A, bisphenol AF (BPAF), tetrabromobisphenol A (TBBPA), and tetrachlorobisphenol A (TCBPA) simultaneously. Materials and methods A recombinant peroxisome proliferator-activated receptor α ligand binding domain (mPPARα-LBD*) was chosen as recognition element in developed FP procedure. The environmental soil samples were assayed for (1) analytical parameters, (2) matrix effect, (3) recovery experiment, and (4) HPLC validation. For statistical analysis, GraphPad Prism 5 software was used. Results and discussion Under the optimized conditions, this assay had an IC 50 of 2.80, 6.84, 4.67, and 4.66 μg g −1 for BPA, BPAF, TBBPA, and TCBPA, respectively. The developed assay demonstrated the limits of detection (LODs) of 0.35, 0.21, 0.27, and 1.03 μg g −1 for these four compounds, which could meet the requirement of environmental monitoring. For spiked soil samples, mean recoveries of the analytes ranged from 85.3 to 101.1%, yielding coefficient of variations (CVs) ranged from 9.8 to 17.5%. Conclusions In this study, a broad-specificity receptor protein for BPA, BPAF, TBBPA, and TCBPA was produced and was used to develop an FP assay in soil samples. The efficiency and simplicity of the proposed assay define its possible application as a screening tool for environmental monitoring.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2017
·
IF 4.529
Dezhi Yang,Xiaolan Li,Dongling Meng,Meng Wang,Yaling Yang
A magnesium–aluminum layered double hydroxides coated on magnetic nanoparticles (Fe 3 O 4 @MgAl-LDHs NPs) combined with the supramolecular solvents (SUPRASs) as the magnetic supramolecular fluids were successfully applied to the extraction and determination of four phenolic compounds (Bisphenol-A (BPA), bisphenol-AF (BPAF), tetrabromobisphenol-A (TBBPA) and 4-tert-octylphenol (4-TOP)). Magnetic supramolecular fluids (ferrofluids) composites were prepared through adding the mixture of n -octanol and tetrahydrofuran in distilled water as the supramolecular solvents into the solution containing magnetic Fe 3 O 4 @MgAl-LDHs NPs. Under the optimized conditions, the calibration curve was obtained in range of 5–1000 μg L −1 . The limits of detection (S/N = 3) for BPA, BPAF, TBBPA and 4-TOP, were obtained for 0.54, 0.48, 0.37 and 0.63 μg L −1 , respectively. The intra-day and inter-day precision (RSDs %) for bisphenols (BPs) and 4-TOP at 100 and 300 μg L −1 were in the range of 4.0–7.8. The enrichment factors were between 16 and 24.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CATALYSIS TODAY
·
2017
·
IF 4.636
Yajing Huang,Wenjun Xu,Lingling Hu,Jiawei Zeng,Chun He,Xiuqin Tan,Zhuoyan He,Qiong Zhang,Dong Shu
MWCNTs/Fe 3 O 4 magnetic composites, combined adsorption and catalytic ozonation behavior, were synthesized by a hydrothermal process. The synthesized MWCNTs/Fe 3 O 4 composites were characterized by X-ray diffraction (XRD), scanning electronic microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), element analysis and Brunauer-Emmett-Teller (BET) surface area. The adsorption performance and catalytic activity of MWCNTs/Fe 3 O 4 for BPA removal in aqueous solution were evaluated. The results showed that the synthesized MWCNTs/Fe 3 O 4 exhibited an excellent adsorption ability and catalytic ozonation activity owning to its large specific surface areas, hollow tube channels and abundant surface oxygen-containing groups, leading to high adsorption for BPA and O 3 , high retention and utilization of O 3 molecules on the composites. In addition, the catalytic ozonation performance of MWCNTs/Fe 3 O 4 could be improved by increasing surface oxygen-containing groups to accelerate O 3 decomposition, thus producing more OH radicals. Moreover, BPA removal efficiency could be improved by increasing dose of catalyst, pH value and the concentration of humic acid (HA). The fluorescence spectra and OH radicals measurement displayed that HA could greatly increase OH radicals via inducing more surface oxygen-containing groups on the catalyst, thus, promoting BPA removal. Furthermore, MWCNTs/Fe 3 O 4 showed the great stability and durability during several reaction recycles.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2016
·Vol. 4
·期 48
·18942-18951
·
IF 8.262
Feng Qian,Xiangdong Zhu,Yuchen Liu,Shilai Hao,Zhiyong Jason Ren,Bin Gao,Ruilong Zong,Shicheng Zhang,Jianmin Chen
Magnetic carbon composites (MCs) have received great interest in areas such as environmental remediation, catalyst supports and carriers for drug delivery systems. In order to improve the porosity of the MCs, the catalytic mechanism of iron salts during CO2 activation of hydrochar was systematically investigated using a suite of methods including Mössbauer spectroscopy, on-line pyrolysis gases and porosity analysis. Fe3O4 and superparamagnetic α-Fe2O3(s), pyrolysis products of iron salts, were found to promote the reaction between carbon and CO2 gas, leading to a decrease in the activation temperature that is required for optimal porosity. However, the reduction reaction between iron oxide and carbon was completely inhibited by CO2 gas. FeCl3 enhanced the thermal cracking of hydrochar and increased the porosity of the MCs in terms of an improvement of the amount of H2, namely the pore-creating effect. However, other iron salts showed adverse effects, due to their inhibition effects on the thermal cracking of hydrochar. The MCs with excellent porosities showed high adsorption capacities for pharmaceuticals and personal care products (PPCPs), and were negatively correlated with the melting points of the PPCPs. The findings from this work can guide the production of novel MCs for maximum removal performance of organic pollutants from the environment.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2024
·
IF 13
Kunlin Chen,Jingyu Chen,Changyue Xu,Haie Zhu,Jing Hu,Kejing Yu
High-performance color-changing compounds, recognized as prominent smart materials, dynamically alter their color in response to external environmental stimuli. However, existing compounds exhibit limited responsiveness and color diversity, presenting challenges in the development of textiles responsive to multiple stimuli. This research introduces a novel design for dual-responsive color-changing microcapsules, employing a Pickering emulsion template method. The larger compartment encloses photosensitive dyes, whereas the smaller one contains thermochromic phase-change colorants. Adjusting the density of nanocapsules in the smaller compartment on the microcapsule surface enables a spectrum of colors, including red, yellow, blue, and green, triggered by light and heat. When incorporated into textiles, these microcapsules bestow adaptive color-changing attributes and infrared stealth capabilities onto the fabrics. Additionally, by modulating the color via surface micro/nanostructures, textile surfaces can exhibit hydrophobic and oleophobic properties. Such enhancements extend the textiles’ potential applications in areas like anti-counterfeiting and military operations.
✓ 已验证
产品关联
DOI
PubMed
高影响因子