INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2019
·
IF 3.375
Fuxiang Feng,Li Wang,Xiangwen Zhang,Qingfa Wang
Ultrathin Ni/ZSM-5 nanosheet catalysts with different acid concentrations, B/L (Brønsted/Lewis acid sites) ratios, and nanosheet thicknesses are designed for the hydroconversion of oleic acid into aviation-fuel-range alkanes (AFRAs). The role of acid concentration/distribution and nanosheet thickness was investigated. High acid concentration enhances the hydrodeoxygenation (HDO) reaction and intrinsic deoxygenation activity because of the synergistic effect between acid sites and metal sites. The selective cracking reaction can be enhanced by tailoring nanosheet thickness and acid distribution. The thin nanosheet favors isomerization, the selective cracking reaction, as well as the generation of central branched isomers. External acid sites dominate the primary cracking and central C–C cracking of the deoxygenated products, but internal acid sites promote the deeper cracking and terminal C–C cracking. Formation of aromatics is thoroughly suppressed at low reaction temperature (≤533 K). A high AFRA yield of 41.4% is achieved over the 3 nm nanosheet catalyst with Si/Al = 300 and B/L = 0.18.
✓ 已验证
产品关联
DOI
高影响因子
FOOD AND AGRICULTURAL IMMUNOLOGY
·
2019
·
IF 2.398
Xiangren Meng,Dejun Ji,Wei Zhang,Lixia Fu,Hengpeng Wang,Peng Wu
The nitrofurans were recently banned from use in livestock production due to their potential carcinogenicity in humans. Therefore, the screening of foods from animal origins for nitrofurans became mandatory. A rapid, specific and sensitive method based on immunochromatographic strip test has been developed for the determination of 3.5-dinitro-N’-(5-nitrofurfurylidene) salicylic acid hydrazide (DNSH) residues in fish. Fish samples were prepared by ultrasonic bath extraction, centrifugation, filtration, drying and res-suspension. The antigen (DNSH-glutaraldehyde-ovalbumin) and a goat anti-mouse IgG antibody were drawn onto a nitrocellulose membrane as the test and control line, respectively. Under optimal conditions, the DNSH cut-off limits for the test strips were determined as 10 ng/mL in 0.01 M phosphate buffered saline and 25 ng/mL in fish samples, with results obtained within 5min. Our data suggests this immunochromatographic assay can be used for the sensitive, rapid, and specific on-site screening of DNSH in fish products.
✓ 已验证
产品关联
DOI
高影响因子
KOREAN JOURNAL OF CHEMICAL ENGINEERING
·
2019
·Vol. 36
·期 7
·1042-1050
·
IF 2.476
Wang Shuai,Lyu Li,Sima Guobao,Cui Ying,Li Baoxia,Zhang Xueqin,Gan Linhuo
A sulfonated lignin-derived mesoporous carbon (LDMC-SO 3 H) was prepared from kraft lignin (KL) using phenolation and soft-template method followed by sulfonation. LDMC-SO 3 H bearing a sulfonic acid density of 0.65 mmol/g possessed a well-ordered 2D hexagonal mesoporous characteristics with mesopore volume of 0.067 cm 3 /g and specific surface area of 262 m 2 /g as well as mesopore size of 3.42 nm. A high 5-hydroxymethylfurfural (5-HMF) yield of 98.0% with a full fructose conversion was obtained using LDMC-SO 3 H as catalyst under the optimized reaction conditions of reaction temperature and time of 140 °C and 120 min, initial fructose concentration of 100 g/L, catalyst load of 0.1 mg/mg in DMSO. Furthermore, there was no obvious decrease in 5-HMF yield (≥95.0%) within the five-cycle experiment, highlighting the superior reusability and stability of LDMC-SO 3 H in fructose-to-5-HMF transformation.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Xiaoxiao Sun,Chao Liu,A.M. Omer,Li-Ye Yang,Xiao-kun Ouyang
A new pH-sensitive drug carrier based on alginate (Alg), chitosan (Cs), and kappa-carrageenan (kC) marine biopolymers was developed, comprising a dual-layered polyelectrolyte complexes microbead structure. Fourier-transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) were used to investigate the structures, thermal stability , and morphological changes, respectively, of the microcapsules we developed. In the intestinal environment (pH 7.4), the stability and swelling of Alg microbeads were enhanced after generation of the dual-layered polyelectrolyte complexes. The in vitro release profiles of 5-fluorouracil under simulated GI conditions were also examined. At gastric pH (1.2), the cumulative 5-FU release percentage was decreased by introduction of the additional kC layer from 14% in Alg/Cs microbeads to 7% in the dual-layered Alg/Cs/kC microbeads. Additionally, the release profiles were greatly improved under simulated intestinal and colon conditions. Finally, the microbeads were all biodegradable and showed no cytotoxicity in Chang liver cells. Our results clearly indicate that the dual-layer pH-sensitive Alg/Cs/kC microbeads could be used effectively for the targeted delivery of anticancer drugs to the colon.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMOSPHERE
·
2019
·
IF 5.108
Ruijie Xie,Gaoyuan Liu,Dingping Liu,Shimin Liang,Dongxue Lei,Hanying Dong,Haibao Huang,Dennis Y.C. Leung
The traditional treatment processes for volatile organic compounds (VOCs) removal generally suffered several disadvantages, such as secondary air-pollutants. To overcome these issues, wet scrubber coupled with heterogeneous UV/Fenton was developed for gaseous VOCs (i.e. toluene) removal. ZSM-5 supported iron oxide (Fe/ZSM-5) was prepared as a multifunctional catalyst for activation of H 2 O 2 and enhancement of gas-liquid mass transfer. Toluene was removed efficiently by this coupled process with the removal efficiency of 85% during 120 min. Many intermediates were detected in the solution by GC-MS while no intermediates were observed in the outlet gas, suggesting that wet scrubber coupled with heterogeneous UV/Fenton could significantly reduce secondary air pollutants . The possible mechanism of toluene oxidation was proposed including the physical adsorption by Fe/ZSM-5 and OH oxidation. This study provides an environmentally benign and highly efficient chemical scrubbing process for gaseous VOCs removal.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
BIORESOURCE TECHNOLOGY
·
2019
·
IF 6.669
Qingfeng Che,Minjiao Yang,Xianhua Wang,Qing Yang,Yingquan Chen,Xu Chen,Wei Chen,Junhao Hu,Kuo Zeng,Haiping Yang,Hanping Chen
The micropores present in ZSM-5 are beneficial to the production of aromatic compounds in biomass catalytic pyrolysis, although the small pore size leads to severe coke deposition on the catalyst. In this study, a micro-mesoporous structured ZSM-5 zeolite catalyst was synthesized and modified with green templates (sucrose, cellulose, and starch) to introduce additional mesopores. It was found that the catalysts modified using the sucrose and cellulose templates only exhibited a slight increase in their micropore volumes, while the mesopore volume of ZSM-ST (modified with the starch template) reached up to 0.359 cm 3 /g. This increase promoted the cracking of bulky oxygenates and suppressed the polymerization reaction on the ZSM-5 surface, thereby producing a greater number of aromatic products. Moreover, the benzene, toluene, and xylene (BTX) yields exhibited a positive correlation with the catalyst mesopore volume, with the highest BTX yield of 91.84 mg/g being obtained with 10% starch addition.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Molecular Catalysis
·
2019
·
IF 2.938
Chenglong Dong,Hongtao Wang,Haochen Du,Jiebang Peng,Yang Cai,Shuai Guo,Jianli Zhang,Chanatip Samart,Mingyue Ding
Furfurylamine converted from biomass-based platform molecules furfural was proven a significant intermediate in the synthesis of different valuable compounds. The combination of Ruthenium with HZSM-5 was acted as an excellent selective and reusable catalyst for the reduction amination of furfural with environmentally friendly ammonia and hydrogen. Incorporation of Ru species into HZSM-5 had a significant enhancement to the acid sites of Ru/HZSM-5. The Ru/HZSM-5(46) catalyst with optimized acid sites and interaction of the Ru-O-Al bond displayed an excellent catalytic performance, producing 76 % yield of furfurylamine at only 15 min, and could be recycled five times without loss of performance. Synergistic effect between RuO 2 and metallic Ru in the Ru/HZSM-5 catalyst facilitated the reduction amination of furfural.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2019
·
IF 14.229
Jiaqin He,Dongyun Chen,Najun Li,Qingfeng Xu,Hua Li,Jinghui He,Jianmei Lu
Mesoporous ZSM-5 zeolite-supported PdCu alloy nanoparticle catalysts are synthesized via a facile and environmentally friendly method. The mesoporous structure is formed through the loss of carbon black particles encapsulated by zeolite crystals during calcination. The ZSM-5-supported PdCu nanoparticles are shown to possess mesoporous structure, evenly distributed PdCu alloy nanoparticles, and excellent catalytic performance in toluene oxidation. The mesoporous structure of the ZSM-5-supported PdCu nanoparticles provides a large specific surface area and pore size, resulting in numerous accessible active sites. The alloying of Pd with Cu both increases the catalytic performance of the catalyst and lowers its cost. Overall, the catalyst with a Pd/Cu ratio of 8:2 showed the highest catalytic activity of the fabricated materials, achieving 100 % toluene conversion at 160 °C. The mechanism of toluene oxidation over these catalysts can be explained by the Mars–van Krevelen model.
✓ 已验证
产品关联
DOI
高影响因子
ACS Omega
·
2019
·
IF 2.584
Jun-Li Yang,Yun-Han Yang,Yu-Peng Xun,Ke-Ke Wei,Jie Gu,Mei Chen,Li-Juan Yang
A novel fluorescent probe, amino-pillar[5]arene (APA), was prepared via a green, effective, and convenient synthetic method, which was characterized by nuclear magnetic resonance (NMR), infrared (IR), and high-resolution mass spectrometry. The fluorescence sensing behavior of the APA probe toward 22 metal ions in aqueous solutions were studied by fluorescence spectroscopy. The results showed that APA could be used as a selective fluorescent probe for the specificity detection of Au3+ ions. Moreover, the detection characteristics were investigated by fluorescence spectral titration, pH effect, fluorescence competitive experiments, Job’s plot analysis, 1H NMR, and IR. The results indicated that detection of Au3+ ions by the APA probe could be achieved in the range of pH 1–13.5 and that other coexisting metal ions did not cause any marked interference. The titration analysis results indicated that the fluorescence intensity decreased as the concentration of Au3+ ions increased, with an excellent correlation (R2 = 0.9942). The detection limit was as low as 7.59 × 10–8 mol·L–1, and the binding ratio of the APA probe with Au3+ ions was 2:1. Therefore, the APA probe has potential applications for detecting Au3+ ions in the environment and in living organisms.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2019
·
IF 4.182
Zeyu Han,Feng Zhang,Xinhong Zhao
Currently, there remains a great challenge to synthesize zeolites in an energy-saving and environmentally friendly manner. Herein we report a novel solvent-free route of synthesizing Fe-ZSM-5 zeolite, which is featured by using Fenton's reagent as a promoter. The influences of crystallization time, amount of hydrogen peroxide and low-temperature pretreatment on the synthesis of Fe-ZSM-5 zeolite were investigated in detail. The results indicate that the combination of solvent-free synthesis with Fenton's reagent can facilitate the rapid crystallization of Fe-ZSM-5 zeolite. The resultant Fe-ZSM-5 zeolite was used as a catalyst for phenol hydroxylation, and characterized by XRD , SEM, ICP-AES, N 2 physisorption and UV–Vis diffuse reflectance spectroscopy. Notably, it exhibits a much better catalytic performance as compared with the reference catalyst by conventional solvent-free method. The observed enhanced catalytic performance for this Fe-ZSM-5 catalyst is attributed to its larger BET surface area and mesoporous volume as well as enrichment towards phenol.
✓ 已验证
产品关联
DOI
高影响因子
KOREAN JOURNAL OF CHEMICAL ENGINEERING
·
2018
·Vol. 35
·期 6
·1312-1318
·
IF 2.199
Xiong Caixia,Sun Yong,Du Juan,Chen Wei,Si Zhihao,Gao He,Tang Xing,Zeng Xianhai
5-[(Formyloxy)methyl]furfural (FMF), an analogue of 5-(hydroxymethyl)furfural (HMF) is becoming more attractive due to its superior stability and hydrophobicity, which make it easier to refineand store. In the present study, FMF was produced from fructose by one-pot approach in pure formic acid media or by a two-step approach via HMF in choline chloride (ChCl)/fructose deep eutectic solvents (DES) system. A favorable FMF yield of 63.22% was reached by two-step approach. In addition, the effects of reaction parameters, such as temperature and acidity, on preparation of FMF from fructose were systematically investigated. The dehydration of fructose into HMF was confirmed as the rate-controlling step in the consecutive reaction. Ultimately, the separation and purification procedures of FMF were put forward. The FMF with a purity of 98.8% was obtained finally. Meanwhile, the FMF purified by saturated sodium bicarbonate solution showed an excelled storage stability.
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS TODAY
·
2018
·
IF 4.667
Mengke Liu,Yingnan Zhao,Huawang Zhao,Xianghui Li,Yuhan Ma,Xin Yong,Hong Chen,Yongdan Li
A number of M-Cu-ZSM-5 (M = La, Ni, La-Ni) samples were prepared via an aqueous solution ion-exchange method. The co-doping with Ni and La into a Cu-ZSM-5 catalyst enhanced the NO decomposition activity in a temperature range 350–550 °C. The characterization results indicate that doping with La effectively improved the dispersion of the Cu species forming more Cu 2+ ions in the sample, while the effect of Ni is likely to facilitate the implantation of Cu 2+ to form (Cu 2+ -O 2– -Cu 2+ ) 2+ dimers. The synergistic effect of La and Ni contributes to the increased (Cu 2+ -O 2− -Cu 2+ ) 2+ content in the co-doped sample, thus enhancing the NO decomposition activity.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）