Sustainability
·
2025
·Vol. 17
·期 20
·9203
·
IF 3.3
Ping Zhu,Teng Xie,Shuangshuang Gong
As a common substitute for brominated flame retardants (BFRs), organophosphate flame retardants (OPFRs) have been insufficiently studied in terms of their ecotoxicological impacts on plastic biodegradation processes in invertebrate systems. This study investigated the impact of an OPFR, tris (1-chloro-2-propyl) phosphate (TCPP), on the dietary behavior and gut microbiota ofGalleria mellonella(Linnaeus, 1758) (Lepidoptera: Pyralidae) larvae during the biodegradation of rigid polyurethane (RPU), as well as the fate of TCPP. The results show that TCPP interfered with larval feeding activity, hindered the nutritional conversion of food, and triggered metabolic compensation through lipid reserve catabolism. Notably, mass balance analysis revealed that bioaccumulation of TCPP was negligible, with most of it excreted through frass, indicating limited biodegradation of this organophosphate ester. 16S rRNA sequencing indicated that TCPP drove the reconstruction of gut microbiota in larvae and identified three dominant bacteria ofMorganellaceae,Enterobacteriaccae, andStaphylococcaceaefamilies, as well as non-dominant bacteria ofKlebsiellaandVagococcaceaefamilies, as characteristic microbiota contributing to RPU and TCPP biotransformation. This study serves as a reminder to pay attention to the toxicity, migration, and transformation of OPFRs in biodegradable plastics. Notably, TCPP, a dominant chlorinated OPFR, exhibits environmental persistence with limited biodegradability and low bioaccumulation, traits which hinder the spontaneous attenuation of plastic waste in ecosystems and undermine the sustainability of the plastic lifecycle. This work emphasizes the need to integrate risk assessments of specific additives into the plastic waste management framework and to develop targeted detoxification strategies for promoting a sustainable material lifecycle.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2025
·
IF 2.5
Xiang Gao,Jiajia Zhao,Hao Song,Xintong Zhou,Yuehua Deng,Jiali Liu,Yanrui Li
Graphitic carbon nitride (CN), a promising photocatalyst for CO2 reduction, suffers from inefficient light harvesting and sluggish charge separation dynamics, which severely restricts its application. Ionic liquids (ILs) have been used for the assisted preparation of photocatalysts, thus effectively altering their geometric and electronic properties. Herein, the 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim]PF6) IL was introduced as a modifier to successfully construct a P- and F-co-doped porous CN catalyst via simple calcination of the IL and urea without any organic solvents and templates. The optimized catalyst exhibited an enhanced photocatalytic activity for CO2 reduction via gas–solid mode under visible light irradiation, achieving CO and CH4 evolution rates of 39.9 and 2.63 μmol g−1 h−1 (CO selectivity of 94%), which were 7.8 and 4.8 times higher than those of pristine CN, respectively. PFCN also demonstrated excellent reusability and stability. Comprehensive characterization revealed that the strategy of doping of P and F atoms significantly enlarged the surface area, improved CO2 adsorption, broadened visible-light harvesting, and accelerated charge transfer and separation efficiency. This work highlights the potential of ILs as multifunctional agents for designing high-performance doped CN photocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
Analytical Methods
·
2025
·
IF 2.6
Tiechun Li,Mengjia Guo,Weiwei Luo,Quanping Diao,Linlin Lv,Pinyi Ma
Nitrite (NO2−) has been extensively utilized in the food industry as a preservative and colorant; however, excessive intake can lead to serious health issues, highlighting the need for accurate and efficient detection methods. In this work, blue fluorescent iron and nitrogen co-doped carbon dots (Fe/N-CDs) were synthesized via a one-step hydrothermal method using ferric chloride, ethylenediaminetetraacetic acid (EDTA), and diethylenetriamine (DETA) as precursors. The prepared Fe/N-CDs exhibited excellent peroxidase-like activity. By leveraging the catalytic activity of Fe/N-CDs and the oxidation and diazotization reactions induced by NO2−, we developed a dual-mode fluorescent and ratiometric colorimetric sensor for nitrite detection. The fluorescence and colorimetric methods had linear detection ranges of 2.5–75 μM and 2.5–100 μM, with detection limits of 0.68 μM and 1.19 μM, respectively. The developed dual-mode sensing platform was successfully applied to detect NO2− in both pickled vegetable and cured pork samples, demonstrating its feasibility in practical applications. Furthermore, the color of the reaction changed from blue to yellow as the NO2− concentration increased. Quantitative nitrite analysis was further achieved by capturing RGB values with smartphone-assisted color-recognition software, using the green-to-red (G/R) ratio as the analytical signal.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry C
·
2025
·
IF 5.1
Jiansen Wen,Ping Li,Linqin Jiang,Baisheng Sa,Hao Xiong,Lingyan Lin,Xiaokun Huang,Aijun Yang,Yu Qiu
Lead-free Cs3Cu2I5 perovskite, featuring a low-dimensional structure and self-trapped exciton emission, presents significant promise for sustainable optoelectronics. Although mechanical ball milling has the advantage of being environmentally friendly and scalable, the optoelectronic performance of synthesized Cs3Cu2I5 is often constrained by lattice distortion, surface defects, and particle agglomeration induced during milling. To overcome these challenges, an alkyl-chain-engineered passivation strategy derived from amino acids was proposed through a combined theoretical calculation and experimental validation approach. Density functional theory reveals that the multifunctional amino acid and alkyl chain synergistically passivate both the coordination-deficient Cu+ ions and iodine vacancies prone to deep-level defects on the Cs3Cu2I5 surface. Interestingly, the extended alkyl chain significantly enhances the modification effect. Subsequent experiments and calculations further confirmed that longer alkyl chains effectively enhance photoluminescence, prolong carrier lifetime, suppress aggregation, and improve grain compactness by interacting with multiple functional groups through hydrogen-bond networks, steric hindrance, and internal electric fields. It is worth highlighting that 5-AVA-modified Cs3Cu2I5 achieved a remarkable PLQY of 75.6% (a 56.8% enhancement), prolonged carrier lifetime by 12.6%, and significantly enhanced UV-region photoresponse. Furthermore, the photodetector fabricated with this molecularly engineered green perovskite exhibits a nearly fourfold and 171% improvement in PDRC and switching ratio, respectively. This theory-guided, alkyl-chain-engineered molecularly synergistic multi-functional-group passivation strategy establishes a robust framework for green synthesis of optoelectronically superior, eco-friendly lead-free copper-based perovskites.
✓ 已验证
产品关联
DOI
高影响因子
IONICS
·
2025
·
IF 2.6
Gu Bonwun,Kang Chankyu
In this study, the flash points and ionic conductivity of three ternary electrolyte solvents (ethylene carbonate (EC); diethyl carbonate (DEC); and dimethyl carbonate (DMC)) were investigated in lithium-ion batteries. The flash points of the solvent mixtures were experimentally measured and compared with predictions using Raoult’s law and multiple regression analysis. These results indicate that EC increases flash point temperature and ionic conductivity owing to its high dielectric constant and boiling point. In contrast, DMC has a lower flash point because of its low boiling point and high reactivity. The coefficient of determination ( R 2 ) and mean absolute error (MAE) suggest that Raoult’s law better predicts overall trends in flash points. Simultaneously, multiple regression analysis provided higher accuracy for specific mixture compositions. Additionally, the ionic conductivities of the ternary electrolyte mixtures were analyzed, demonstrating that DMC maintained high conductivity through polar conformers despite its low dielectric constant. The optimal mixture ratio of EC: DEC: DMC at 7:2:1 achieved a balance with a high flash point (55.5 °C) and high ionic conductivity (9.0 mS cm⁻ 1 ), enhancing battery safety and ionic conductivity. This study highlights the critical role of solvent composition in optimizing lithium-ion battery electrolytes for improved safety and ionic conductivity. Graphical
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2025
·Vol. 15
·期 47
·40056-40066
·
IF 4.6
Huimin Jia,Ya Wang,Yiting Yang,Chuang Liu,Weiwei He
Constructing a multi-interface synergistic catalytic system represents an effective strategy for developing highly efficient photocatalysts; however, the challenge lies in fabricating ideal heterojunctions that can fully harness the multiple synergistic effects of the components. In this study, a series of TiO2/Pd/Ti3C2 nanocomposite photocatalysts with 2D/0D/2D heterojunctions were successfully fabricated through a combination of photoreduction and electrostatic self-assembly techniques by varying the mass ratios. Under irradiation from a 300 W xenon lamp, the as-constructed TiO2/3% Pd/1% Ti3C2 heterojunction photocatalyst exhibited a significantly enhanced H2 evolution rate of 21.60 mmol h−1 g−1, which was approximately 135-fold and 25.4-fold higher than those of pristine TiO2 nanosheets (NSs) and TiO2/1% Ti3C2, respectively. Electrochemical impedance spectroscopy, photoluminescence spectroscopy, and electron spin resonance analysis collectively revealed that the enhanced photocatalytic performance can be attributed to the formation of a synergistic catalytic interface among the TiO2 NSs, highly active Pd NPs, and monolayer Ti3C2 nanosheets. This interface facilitated efficient charge separation, shortened the charge transfer pathways, and enhanced the generation of reactive oxygen species. This study presents a promising strategy for improving catalytic performance through multi-interface synergy and offers a preliminary investigation into the underlying synergistic mechanisms using multiple characterization techniques.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Tungsten
·
2025
·
IF 11.2
Wang Xue,Zhang Li,Han Yu,Li Feng-Bo,Li Shao-Bin
Accurate non-invasive glucose monitoring is crucial for health diagnostics. However, the development of high-performance non-enzymatic electrochemical sensors for this application remains a significant challenge. To address this issue, a novel material, FeOOH encapsulated within zeolitic imidazolate framework-67 (ZIF-67)-derived copper-cobalt-layered double hydroxide (FeOOH@CuCo-LDH), was developed through a vapor-assisted deprotonation process for FeOOH encapsulation, followed by a hydrothermal reaction to synthesize the hollow composite. The synergistic interactions between the multi-metallic composition and the hollow structure significantly enhance glucose oxidation-reduction reactions. This enables the sensor to achieve a wide linear detection range (0.5–722 μmol·L −1 and 722–4222 μmol·L −1 ), high sensitivity (4.05 and 1.43 μA·L·μmol −1 ·cm −2 ), and a low limit of detection (0.83 μmol·L −1 ). The sensor demonstrated excellent performance in practical applications, accurately detecting glucose in saliva under physiological conditions. This study highlights the potential of FeOOH@CuCo-LDH as an excellent electrode material for non-enzymatic electrochemical glucose sensing, offering promising applications in diabetes prevention and diagnosis. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
Surfaces and Interfaces
·
2025
·
IF 6.3
Yujie Liu,Qiang He,Xiaosen Wang,Yangyang Jia,Qi Guo,Anling Li
The surface properties of materials inside aircraft engines are diverse, and the interaction mechanism between them and multi-component aviation gasoline is not yet clear. This study focused on the silicone rubber material used for aircraft pipeline connections. Through methods such as screen printing, laser etching, and low surface tension liquid spraying, surfaces with different structural characteristics such as hydrophobic, superhydrophobic, and superamphiphobic were successfully prepared. Research on 100LL aviation gasoline (surface tension ∼22 mN/m, complex chemical composition) showed that although the silicone rubber surface presented superamphiphobicity (contact angle with hexadecane >150°, rolling angle <10°), the surface with micron-sized pits (pit center width ∼25 µm, length ∼0.4 mm) still showed rapid spreading and wetting of 100LL aviation gasoline (contact angle CA ≈ 0°). The significant capillary effect shortened the wetting diffusion time to <1 s and sharply reduced the evaporation loss time to <7 s. In contrast, spraying a superamphiphobic coating on a flat substrate could effectively weaken the capillary effect, significantly delay the wetting of 100LL aviation gasoline (CA ≈ 67°), and greatly extend its evaporation time to >428 s. This result highlights the key role of micro-nano structure design of material surfaces in the wetting and evaporation kinetics of 100LL aviation gasoline. At the end of the article, based on the experimental content of this study, the intrinsic mechanism of the experimental phenomena was deeply analyzed from the perspectives of surface structure, liquid tension, and microscopic molecular interactions. This research provides an important theoretical basis for optimizing the application performance of aviation gasoline and developing new anti-fuel-wetting surfaces.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF FOOD COMPOSITION AND ANALYSIS
·
2025
·
IF 4.6
Ke Zhang,Zhihua Li,Xiaowei Huang,Yaning Qin,Junjun Zhang,Sulafa B.H. Hashim,Haoyang Xu,Ruoying Zhang,Jiyong Shi,Xiaobo Zou
This study developed a pore-tunable colorimetric aerogel based on carboxymethyl cellulose (CMC), polyvinyl alcohol (PVA), and butterfly pea anthocyanin (BA) via sol-gel/freeze-drying, for real-time food freshness monitoring. The regulatory mechanisms of volume ratios on the aerogel's morphology, microstructure, physical properties, and release behavior were systematically investigated. The results demonstrated that CMC and PVA formed a stable 3D-H-bonded network, endowing the aerogel with outstanding water absorption capacity (2468.27 %), high hardness (7008.24 g), and excellent thermal stability. At a CMC/PVA ratio of 1:1, the uniform and dense pore structure modulated the BA diffusion pathways, achieving a continuous and controllable release behavior consistent with Fick diffusion kinetics. Furthermore, the BA-loaded aerogel exhibited high sensitivity to pH buffers and ammonia vapor (with a detection limit of 0.39 μM for ammonia), along with reversible color changes. During pork quality monitoring, the C1P1T (where 'C' and 'P' denote the mass of CMC and PVA, respectively, and 'T' indicates that the aerogel was loaded with BA extract) aerogel showed distinguishable color changes, clearly distinguishing between fresh, sub-fresh, and spoiled stages. This work provides a novel strategy for developing overly sensitive intelligent indicator systems for meat freshness monitoring.
✓ 已验证
产品关联
DOI
高影响因子
WATER RESEARCH
·
2025
·
IF 12.4
Xiao Luo,Yihan Li,Xiaoke Ma,Tapas Sen,Lin Zhao,Yongkui Yang,Peizhe Sun
The individual Fe(VI) as FeO 4 2- or peroxydisulfate (PDS) oxidation process faces challenges of limited oxidation efficiency, excessive dosage consumption, and a narrow pH range. Fe is an important component in both Fe(VI) oxidation and PDS activation. We propose linking Fe in the combined Fe(VI)/PDS process to address the challenges of their individual processes. The contribution of Fe species to reactive oxygen species (ROS) production in the Fe(VI)/PDS process and the regulatory effects of quinones on Fe species in the Fe(VI)/PDS-benzoquinone (BQ) process were investigated. The reactive oxidation species generated by the Fe(VI)/PDS process included high-valency iron species such as Fe(VI), Fe(V), and Fe(IV); hydroxy radicals (∙OH), singlet oxygen ( 1 O 2 ), and SO 4 ˙ˉ contributed differently at varying pH levels. PDS accelerated the conversion of Fe(VI) to Fe(V) and Fe(IV), which are more reactive, and facilitated their regeneration from Fe(III) and Fe(II). The Fe(II) concentration in the Fe(VI)/PDS process increased by 35.0% after BQ addition, which enhanced PDS activation and shifted the dominant oxidizer from high-valency iron to ROS. In the Fe(VI)/PDS-BQ process, norfloxacin underwent oxidative degradation via piperazinyl ring degradation, defluorination, and quinolone group degradation, as evidenced by degradation byproducts and further supported by density functional theory calculations. The Fe(VI)/PDS-BQ process significantly reduced the toxicity of norfloxacin. A novel Fe(VI)/PDS-BQ process was developed with the potential to eliminate antibiotics from water and to identify the Fe-involved oxidation mechanism regulated by BQ addition and pH.
✓ 已验证
产品关联
DOI
高影响因子
DESALINATION
·
2025
·
IF 9.8
Xinyu Yang,Hao Jiang,Zongsheng Hu,Fanju Meng,Bing Hou,Nan Li,Jingwen Pan,Lei Wang
Excessive fluoride (F − ) in water environment seriously endangers ecological security. This study constructed a series of dual-metal loaded biochar adsorbents (CeFe@BC) by modifying cerium-based materials through Fe doping and coupling with straw-derived biochar substrates. Ce 9 Fe 1 @BC 11 exhibited a remarkable F − adsorption capacity of 110.32 mg/g and had broad operational pH range (q e(pH=2 – 12) ≥ 82.61 mg/g). It showed exceptional selectivity and affinity toward F − even in multicomponent systems. The adsorption process was successfully characterized by pseudo-second-order kinetic (R 2 ≥ 0.999) and Temkin isotherm model (R 2 ≥ 0.952), indicating a chemisorption-dominated mechanism. Mechanistic studies revealed that Fe(II) doping maintained the quantity of Ce(III) active adsorption sites through the Fe(II)/Ce(IV) redox reactions, enabling the inverse transformation from Ce(IV) to Ce(III), rather than participating directly in adsorption. This regeneration mechanism increased the number of adsorption active sites of the material by re-reducing Ce(IV) back to Ce(III) during fluoride adsorption or desorption, thereby significantly enhancing adsorption performance. Unlike other anions that adsorb solely via substitution of terminal hydroxyl groups (T-OH) on metal oxides, fluoride onto CeFe@BC exhibited a dual-site adsorption behavior, involving both T-OH substitution and occupancy of bridging hydroxyl (B-OH) sites. Consequently, the T-OH and B-OH groups coordinated with Ce(III) constitute the primary active adsorption sites. The hierarchical porous structure of the straw biochar exposed abundant adsorption sites and also enhanced electron transfer during redox cycles due to its superior conductivity, enabling regeneration of Ce(III) active sites. This work provided a novel strategy for the synergistic structural-functional modulation of high-performance fluoride adsorbents, advancing the rational design of materials for environmental remediation.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Shuai Yin,Xiaojian Xu,Guohong Zeng,Yuwen Ju
Certain geologic conditions in silty soils exhibit poor engineering properties, including low strength and instability, which threaten the stability of geotechnical systems. This study introduces a novel soil stabilization approach using a ternary interpenetrating polymer network (IPN) formed through the synergistic reaction of sodium alginate (SA), acrylamide (AM), and hexadecyl methacrylate (HMA). This strategy is innovative because it leverages both hydrophobic association and ionic cross-linking to create a robust gel matrix that effectively binds soil particles. A three-factor, three-level orthogonal design was used to optimize the component ratios (SA:AM:HMA). Using SA as a control, conduct a dry-wet cycle test to compare changes in unconfined compressive strength between SA and SA-modified polymer-treated soils. Results indicate that after 28 days of curing, soil samples treated with the optimal mixture (1.5:1.5:2.5) attained a maximum unconfined compressive strength (UCS) of 2405.69 kPa. Compared to untreated soil, the cohesion significantly increased to 119.66 kPa, while the internal friction angle showed no significant change. The hydraulic conductivity was reduced to 3.45 × 10 −6 cm/s. The durability of SA-modified polymer-stabilized soil is significantly superior to that of SA. Microstructural analyses confirmed that the polymer gel enhances soil-polymer interaction through pore-filling and chemisorption, drastically improving the pore structure and mechanical properties. This study provides a theoretical basis for the application of this novel biopolymer-based stabilizer in silty soil improvement.
✓ 已验证
产品关联
DOI
PubMed
高影响因子