Food Chemistry-X
·
2024
·
IF 6.5
Doudou Lei,Lingling Li,Pengyue Song,QingBin Xu,Lihua Huang,Xiao Ma,Lidong Zhou,Weijun Kong
Glyphosate (Gly) is a widely-used herbicide in food production, while, the residue of which due to the long-term and excessive overspray poses serious threats to public health. The development of reliable methods for its sensitive detection is of great urgency. In this study, a novel ratiometric fluorescent nanosensor by encapsulating N-doped carbon dots (N-CDs) and gold nanoclusters (AuNCs) in zeolitic imidazole framework-8 (ZIF-8) as the dual-emissive fluorescence probes at 410 and 650 nm, respectively, was constructed for Gly detection. Due to the adsorption property of ZIF-8, the N-CDs/AuNCs@ZIF-8 nanoprobes accumulated Cu 2+ to quench the red fluorescence of AuNCs, and the blue fluorescence of N-CDs was stable. While thiocholine, a product of acetylthiocholine, hydrolyzed by acetylcholinesterase could coordinate with Cu 2+ , resulting in significant fluorescence recovery of AuNCs. This phenomenon was utilized for the quantitation of Gly, due to its inhibitory effect on acetylcholinesterase activity. By calculating the fluorescence intensity ratio ( I 650 /I 410 ), Gly in real sample could be accurately determined in a concentration range of 2–100 ng/mL with a limit of detection of 1.92 ng/mL because of the anti-interference and the self-correction ability of the two fluorescence signals. The N-CDs/AuNCs@ZIF-8 nanoprobes-assisted ratiometric fluorescent nanosensor exhibited unique merits of rapid construction, simple operation, high specificity, and good accuracy for Gly in edible and medicinal malt samples with recoveries of 93.7–108.2 %. This study presents a multiple tool for the versatile sensing of trace pesticides in more food matrices, which can be extended to a full range of environmental and food safety applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2017
·
IF 6.216
Yidi Wang,Bowen Li,Guanshu Li,Xue Ma,Hongbo Zhang,Yingying Huang,Guowei Wang,Jun Wang,Youtao Song
Z-scheme structure is an effectively construction to improve the photocatalytic activity due to the excellent photo-generated electron-hole pairs separation efficiency. In this paper, the Er 3+ :YAlO 3 @(PdS/BiPO 4 )/(Au/rGO), (Au/rGO)/CdS and modified Z-scheme Er 3+ :YAlO 3 @(PdS/BiPO 4 )/(Au/rGO)/CdS photocatalysts were prepared by hydrothermal, ultrasonic dispersion, deposition-precipitation and ultrasonic-assisted methods. The prepared samples were characterized by X-ray diffractometer (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance spectra (DRS), fourier transform infrared spectra (FT-IR), raman spectra and photoluminescence (PL) spectra. The photocatalytic activity of prepared samples were evaluated via photocatalytic conversion rate of nitrite under ultraviolet-light and simulated solar-light irradiations. Due to the enhanced separation efficiency of electron-hole pairs, the Er 3+ :YAlO 3 @(PdS/BiPO 4 )/(Au/rGO)/CdS exhibited excellent performance under both ultraviolet-light and simulated solar-light irradiation, reaching 94.59% and 91.25% conversion rates, respectively. Meanwhile, the effects of simulated solar-light irradiation time and corresponding reaction kinetics on photocatalytic conversion of nitrite were studied. Subsequently, the effects of electron and hole scavengers were investigated to further elaborate the possible mechanism. In addition, the study of used times showed that the prepared modified Z-scheme Er 3+ :YAlO 3 @(PdS/BiPO 4 )/(Au/rGO)/CdS nanocomposites can be effectively recycled without an apparent inactivation on photocatalytic activity. This research may provide a potential way by utilizing solar energy efficiently for converting nitrite and other contaminants released into the environment.
✓ 已验证
产品关联
DOI
高影响因子
Nano Energy
·
2016
·
IF 11.553
Fukun Ma,Yongzhong Wu,Yongliang Shao,Yueyao Zhong,Jiaxin Lv,Xiaopeng Hao
CdS systems represent promising photocatalysts for hydrogen generation ; however, these systems are seriously restricted by inherent issues with photocorrosion. Here, the CdS photocorrosion process is prevented and a high stable and effective photocatalyst is obtained in the novel 0D/2D CdS/MoS 2 nanosheet composite system . According to crystallization kinetics , the CdS photocorrosion process will be prevented if the S elements resulting from photocorrosion can be reduced back to S 2− in the same photocatalytic system. So a photocorrosion-recrystallization strategy is proposed for the first time to resolve issues with photocorrosion when using CdS photocatalysts. Meanwhile, the recrystallized 0D/2D CdS/MoS 2 nanocomposite produces a high quantum efficiency of 23.03% (λ ex =420 nm), the evolution of hydrogen presents no notable activity losses for up to 400 h. Thus, the approach demonstrated here represents a promising method of designing and fabricating more stable and efficient composite chalcogenide photocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2016
·Vol. 27
·期 7
·6656-6664
·
IF 1.798
Lin Yibing,Lin Yu,Wu Jihuai,Zhang Xiaolong,Fang Biaopeng
In this study, after CdS quantum dots sensitized ZnO hierarchical spheres (ZnO HS), we used a simple process to deposit CdSe QDs on ZnO by spin-coating-based SILAR, and applied to photoanodes of quantum dots-sensitized solar cells. Before CdS and CdSe QDs deposition, the ZnO HS photoanodes were modified by Zn(CH 3 COO) 2 ·2H 2 O methanol solution to further enhance the open-circuit voltage and power conversion efficiency (PCE). The program of modifying photoanodes and the number of CdSe spin-SILAR cycles are evaluated on the optical and electrochemical properties of the cells. As a result, a high energy conversion efficiency of 2.49 % was obtained by using modified ZnO HS/CdS photoanode under AM 1.5 illumination of 100 mW cm −2 . And further decorated by the CdSe QDs, the ZnO HS/CdS/CdSe cell achieved a PCE of 5.36 % due to the modification of ZnO HS nanostructure, the enhanced absorption in the visible region, the lower recombination reaction and higher electron lifetime.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2017
·
IF 7.504
Dandan Ma,Jian-Wen Shi,Yajun Zou,Zhaoyang Fan,Xin Ji,Chunming Niu
A novel CdS/ZnO heterojunction constructed of zero-dimensional (0D) CdS quantum dots (QDs) and two-dimensional (2D) ZnO nanosheets (NSs) was rationally designed for the first time. The 2D ZnO NSs were assembled into ZnO microflowers (MFs) via an ultrasonic-assisted hydrothermal procedure (100 °C, 12 h) in the presence of a NaOH solution (0.06 M), and CdS QDs were deposited on both sides of every ZnO NS in situ by using the successive ionic-layer absorption and reaction method. It was found that the ultrasonic treatment played an important role in the generation of ZnO NSs, while NaOH was responsible to the assembly of a flower-like structure. The obtained CdS/ZnO 0D/2D heterostructures exhibited remarkably enhanced photocatalytic activity for hydrogen evolution from water splitting in comparison with other CdS/ZnO heterostructures with different dimensional combinations such as 2D/2D, 0D/three-dimensional (3D), and 3D/0D. Among them, CdS/ZnO-12 (12 deposition cycles of CdS QDs) exhibited the highest hydrogen evolution rate of 22.12 mmol/g/h, which was 13 and 138 times higher than those of single CdS (1.68 mmol/g/h) and ZnO (0.16 mmol/g/h), respectively. The enhanced photocatalytic activity can be attributed to several positive factors, such as the formation of a Z-scheme photocatalytic system, the tiny size effect of 0D CdS QDs and 2D ZnO NSs, and the intimate contact between CdS QDs and ZnO NSs. The formation of a Z-scheme photocatalytic system remarkably promoted the separation and migration of photogenerated electron–hole pairs. The tiny size effect effectively decreased the recombination probability of electrons and holes. The intimate contact between the two semiconductors efficiently reduced the migration resistance of photogenerated carriers. Furthermore, CdS/ZnO-12 also presented excellent stability for photocatalytic hydrogen evolution without any decay within five cycles in 25 h.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of the Taiwan Institute of Chemical Engineers
·
2016
·
IF 2.848
Huan Chen,Shihai Cao,Jinhua Yao,Fang Jiang
A novel Ag nanowires–CdS–Au (Ag NWs–CdS–Au) photocatalyst was synthesized by a two-step solvothermal method. As a metal core, thioglycolic acid (TGA) functionalized Ag NWs provided abundant active sites, facilitating the attachment of CdS ; and the excessive S 2− on the surface of CdS favored the loading of Au, leading to the well-developed combined interface of Ag NWs–CdS and CdS–Au. The combination and interaction between Ag NWs–CdS and CdS–Au was beneficial to the electron transfer in the photocatalysis. Multiple electron transfer processes happened in the Ag NWs–CdS–Au photocatalyst, enhancing charge carrier separation efficiency. Therefore, Ag NWs–CdS–Au possessed much higher photocatalytic degradation efficiency (89%) of MB than that of Ag NWs–CdS (45%) under visible light irradiation. Additionally, the Ag NWs–CdS–Au photocatalyst could absorb more visible light, favoring the generation of leuco-methylene blue (LMB) molecules, and further promoting the formation of ·OH. The finding provides a novel method to obtain bimetallic photocatalyst with separated bimetals to achieve high visible light photocatalytic activity and stability.
✓ 已验证
产品关联
DOI
高影响因子
NANOTECHNOLOGY
·
2013
·Vol. 24
·期 20
·205601
·
IF 3.842
Bin Xu,Bing Cai,Ming Liu,Hongsong Fan
This study explored a simple and fast method utilizing ultraviolet (UV) irradiation to synthesize CdTe/CdS/ZnS QDs in aqueous solution. Based on the reaction of photolysis and chemical deposition, the CdS and ZnS shell can be successively deposited around the thiol-capped CdTe cores through the interaction of Cd2+/Zn2+ and S2− produced by UV irradiation. The effect of the UV irradiation time, the ratios of thioglycolic acid (TGA)/Cd and TGA/Zn on the shell formation, shell stability, and the photoluminescence (PL) intensity of the QDs, was systematically investigated. Keeping the ratio of TGA/Cd, increasing UV irradiation time from 30 to 120 s, the blue-shift of the fluorescence emission peak position of CdTe/CdS QDs was observed. As the irradiation time increased continuously from 120 to 300 s, the red-shift of the emission peak position was observed. In the total irradiation time, the PL intensity of all the samples was enhanced. By applying 300 s irradiation on the samples, the emission peak was blue-shifted at a fixed TGA/Cd ratio of 1:1 and red-shifted at the ratios of 2:1, 4:1, 8:1, and 13:1. The PL intensity reached its highest value at the ratio of 2:1. The effect of TGA/Zn ratio on ZnS shell formation showed a similar progress. Under an optimum synthesized reaction condition, the particle sizes of CdTe core, CdTe/CdS core–shell and CdTe/CdS/ZnS core–shell–shell QDs were 2.6 nm, 3.4 nm, and 4.6 nm respectively. This study confirmed that with the core–shell–shell structure, CdTe/CdS/ZnS QDs had high anti-oxidability, photostability, and low toxicity. Therefore they can be further used in cell imaging efficiently.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Analytical Methods
·
2013
·Vol. 5
·期 19
·5309-5316
·
IF 1.855
Yizhong Shen,Shaopu Liu,Jian Wang,Dan Li,Xiaodan Wang,Youqiu He
A sensitive and simple method for the determination of chelerythrine (CHE) was developed based on the fluorescence quenching effect of CHE for glutathione (GSH)-capped CdTe/CdS quantum dots (QDs). Under optimum conditions, a good linear relationship was obtained from 0.073 to 24.0 μg mL−1 with a correlation coefficient of 0.9988, and the detection limit (3σ/κ) was 21.9 ng mL−1. The fluorescence quenching mechanism that has been proposed is based on electron transfer supported by ultraviolet-visible (UV-vis) absorption, fluorescence (FL) spectroscopy and electrochemical techniques. The method has been applied to the determination of CHE in synthetic samples and fresh serum samples from healthy humans with satisfactory results. The proposed method manifested several advantages such as high sensitivity, short analysis time, low cost and ease of operation.
✓ 已验证
产品关联
DOI
高影响因子
Nano Energy
·
2015
·
IF 10.325
Zemin Zhang,Caitian Gao,Zimao Wu,Weihua Han,Yaling Wang,Wenbin Fu,Xiaodong Li,Erqing Xie
We report the fabrication of screw-like SnO 2 nanostructure and its application as photoanode for photoelectrochemical water splitting . The structure was formed by growing thread-like SnO 2 nanosheets onto rod-like single-crystalline SnO 2 nanowires . Such a structure offers an efficient light absorption, high speed electron transport and a large surface-to-volume ratio. The light absorption efficiency of the screw-like SnO 2 nanostructures can be increased by up to 33% than that of the pristine SnO 2 nanowires. After decorated with CdS quantum dots , the photocurrent density can reach 9.9 mA cm −2 at 0 V ( versus saturated calomel electrode) which corresponding to a hydrogen generation of 159.6 μmol (h cm 2 ) −1 and the faradic efficiency is around 86%. The result demonstrated that the water-splitting efficiency of photoelectrochemical cell has been significantly improved by using such a screw-like structure. Our work provides an efficient solution to improve the water-splitting performance and it can also be a model structure for similar electrode materials.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2017
·
IF 9.446
Dongting Yue,Xufang Qian,Miao Kan,Meng Ren,Yao Zhu,Lele Jiang,Yixin Zhao
Binary transition metals layered double hydroxides (LDH) such as [NiFe] have been developed as the promising low cost and high performance electrocatalysts for hydrogen evolution. However their applications as co-catalysts in photocatalysis like CdTe/CdS quantum dots (QDs) for hydrogen evolution are limited by their ineffective contact with QDs nanoparticles. We report on the synthesis of the sulfurated [NiFe]-LDH (FeNiS) nanoparticles via the sulfurizing treatment of [NiFe]-based LDH. The sulfurizing treatment can successfully break the 2D [NiFe]-LDH into FeNiS nanoparticles by replacing the OH group via the S group. FeNiS nanoparticles provide more bonding sites for CdTe/CdS QDs due to the sulfur species formed on the FeNiS nanoparticles. The junction between sulfur species and Cd 2+ of CdTe/CdS QDs could facilitate electrons transfer between CdTe/CdS QDs and FeNiS nanoparticles and then significantly enhance their photocatalytic hydrogen production. The photocatalytic activity of FeNiS-CdTe/CdS is much better than [NiFe]-CdTe/CdS QDs and Pt-CdTe/CdS QDs. In all, this novel FeNiS nanoparticles would be a promising low cost co-catalyst for energy and environmental photocatalysis.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 116
·95744-95749
·
IF 3.84
Jiangling He,Bingfu Lei,Haoran Zhang,Mingtao Zheng,Hanwu Dong,Jianle Zhuang,Yong Xiao,Yingliang Liu
A facile and green approach for preparation of photoluminescent nitrogen-doped carbon dots (N-CDs) is reported, using cheap and extensively available cocoon silk as raw material. The use of H2O2 leads to the enhanced formation of N-CDs. The N-CDs have been synthesized in a short time (50 minutes), and have a high fluorescence quantum yield (24.0%). A small amount of H2O2 solution plays a vital role in shortening the reaction time, which is a brand new way to synthesize N-CDs with the help of H2O2, with both reactants and products being environmentally friendly. The prepared N-CDs are collected by removing the insoluble materials through simple filtration rather than dialysis. As far as we know, this is the first report of N-CDs being synthesized simply with the help of H2O2 solution. The prepared N-CDs solution is sensitive to pH changes, which means they have promise for application in the pH detection area.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2017
·
IF 5.401
Haiyan Wang,Pei Liu,Wenjing Jiang,Xue Li,Huanshun Yin,Shiyun Ai
DNA methylation is one of the important epigenetics events, and it is responsible for transcription, genomic imprinting and cellular differentiation. Aberrant DNA methylation is always contacted with various diseases. Herein, a simple and low-cost photoelectrochemical (PEC) biosensing method is proposed for detection of DNA methylation, assay of DNA methyltransferase (MTase) activity and screening of MTase inhibitor, which is based on M. SssI MTase- HpaII endonuclease system. The graphite-like C 3 N 4 (g-C 3 N 4 ) and CdS quantum dots (CdS QDs) are used as photoactive materials. After the double-stranded DNA (dsDNA) was treated with M. SssI MTase in the presence of S -adenosylmethionine, the methylated dsDNA cannot be digested by HpaII endonuclease and dithiol group at the terminal of dsDNA can be retained. As a result, CdS QDs could be coupled successfully with methylated dsDNA between the reaction of CdS QDs with dithiol of dsDNA, achieving the amplification of PEC response. Thus, the photocurrent of PEC biosensor is consistent with the M. SssI activity. The increased photocurrent was in proportion to M. SssI activity in the linear range from 1 to 80 U/mL with a detection limit of 0.316 U/mL. Furthermore, the effects of atrazine and azamethipos on M. SssI MTase activity were investigated, which might provide useful information on carcinogenic mechanism of pesticide. The PEC biosensor has potential to screen of DNA MTase inhibitor, providing valuable information for anti-cancer drug research and also for cancer therapy.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）