FOOD CHEMISTRY
·
2022
·
IF 9.231
Fuxiang Wang,Zuopeng Li,Hongping Jia,Runhua Lu,Sanbing Zhang,Canping Pan,Zhiqiang Zhang
A turn-on fluorescent sensing platform based on an ultralow concentration of Al-metal organic frameworks for the detection of aflatoxin B 1 has been developed for the first time. This fluorescence turn-on sensor exhibits the largest fluorescence enhancement (or quenching) constant value of 179404 M −1 among all luminescence-based chemical sensors reported till date. Moreover, the sensor afforded a rapid detection of aflatoxin B 1 , with a linear response in the concentration range of 0.05–9.61 μM and a low detection limit of 11.67 ppb. Additionally, the fabricated sensor showed good repeatability, reproducibility, stability, and selectivity. Most importantly, the practical application of this sensor has been demonstrated by detecting aflatoxin B 1 in complex tea samples with low relative standard deviation (≤7.72%; n = 3) and satisfactory recoveries. In summary, the proposed method has great potential as a simple, sensitive and selective strategy for monitoring aflatoxin B 1 in food samples.
研究领域:
食品安全
·
分析化学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MATERIALS CHEMISTRY AND PHYSICS
·
2023
·
IF 4.6
Shu-ji Wang,Di Wang,Peng Chen,Shi Yan,Qing-jie Jiao,Xue-yong Guo
Micro-nano composite energetic materials have attracted extensive attention from researchers due to their excellent properties. Electrostatic spray drying, as an emerging composite material preparation technology, has an important impact on the assembly and energy release regulation of energetic materials. In this paper, NC with excellent mechanical properties was selected as the energetic binder. The uniform assembly of TKX-50 and Al was achieved by electrostatic spraying technology, and Al@TKX-50@NC micro-nano composite energetic material microspheres were prepared. The structure and composition of the composite were characterized, and its thermal decomposition kinetics and thermodynamics were calculated and analyzed. At the same time, its ignition and combustion performance were tested. It is found that the samples prepared by electrostatic spray are regular spherical, and the particle size is about 1–6 μm. Compared with the physical mixture samples, the Al@TKX-50@NC composite microspheres not only have a more complete oxidation reaction but also have better ignition and combustion performance. The results show that the electrostatic spray method is very effective in improving the energy release of composite energetic materials.
研究领域:
材料科学
·
能量材料工程
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Tao Li,Weikun Sun,Jian Zhang,Shengqin Liu,Hongbin Chen,Zumin Qiu,Jason Chun-Ho Lam
Herein, an efficient and stable catalyst of Co 3 O 4 @LDH-AC was innovatively prepared through uniform loading of an activated carbon substrate with Mg/Al layered double hydroxide (Mg/Al-LDH) followed by dispersing Co 3 O 4 nanoparticles in the confined space of LDH. This unique flower-like spherical structure significantly improved the adsorption capacity and would increase the concentration of reactants in the confined space. Experimental results showed that levofloxacin (LFX) completely degraded in 4 min with the addition of µM peroxymonosulfate (PMS). The fast conversion of Co 2+ and Co 3+ in catalyst for the generation of highly reactive species is revealed via EPR, in-situ Raman, in-situ FT-IR, and XPS. Further tests of 5Co 3 O 4 @LDH-AC in effluent of hospital wastewater treatment showed that it not only possessed strong anti-interference capabilities, but also maintained stable catalytic activity in fixed-bed reactor for a long operation time. Therefore, the excellent catalytic performance in confined space offers the possibility of application for the degradation of micropollutants in real pharmaceutical wastewater discharged from hospital (800–1200 tons/day, COD > 150 mg/L).
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Le Zhong,Yuxiao Feng,Zichen Wang,Tian Tian,Yali Bi,Jiandong Cui
Enzymatic synthesis of flavor esters is crucial for applications in food, beverage, and cosmetics industries. However, the poor activity and stability of free lipase hinder these reaction. Inspired by the concept of lipase interface activation, MIL-53(Al)-NH 2 was modified with alkyl acid anhydrides of varying chain lengths to tailor its hydrophobicity, and Candida Rugosa lipase (CRL) was subsequently immobilized on this surface to achieve efficient interface activation. The resulting CRL@MIL-53(Al)-AM11 exhibited 3.5 times higher activity than the unmodified CRL@MIL-53(Al)-NH 2 . Moreover, CRL@MIL-53(Al)-AM11 enabled one-step purification of crude CRL via selective adsorption. It also showed enhanced storage and thermal stability as well as higher resistance to protease degradation and denaturants than free CRL. CRL@MIL-53(Al)-AM11 retained 75 % of its initial activity after 30 min treatment at 55 °C, whereas the free CRL retained only 41 %. After 11 days of storage, CRL@MIL-53(Al)-AM11 maintained 70 % of its initial activity, in contrast to 36 % for the free lipase. Notably, CRL@MIL-53(Al)-AM11 achieved a 97 % conversion rate in the esterification synthesis of the flavoring substance (butyl butyrate) within 24 h and retained over 40 % conversion after five consecutive cycles. Therefore, this strategy offers a feasible approach for constructing high-performance immobilized lipases for flavor ester synthesis.
研究领域:
生物化学
·
食品科学
·
酶工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Research and Technology-JMR&T
·
2020
·
IF 5.289
Chenguang Liu,Liming Yu,Zongqing Ma,Yongchang Liu,Chenxi Liu,Huijun Li,Hui Wang
Effects of Y 2 W 3 O 12 particle inclusions and content on damping capacity of Al–12Si composites have been investigated. The Y 2 W 3 O 12 , which is a kind of negative thermal expansion material, can generate high local strain in the composites. Thermal expansion testing shows that the coefficient of thermal expansion (CTE) of Y 2 W 3 O 12 has obvious changes between 100 and 200 °C The Y 2 W 3 O 12 /Al–12Si composites show damping peaks and display higher damping capacities than the pure Al–12Si alloy. The damping capacities of composites strongly depends on the content of Y 2 W 3 O 12 inclusions. A thermal strain damping model is also established. Based on the model analysis results, there is a significant contribution of thermal strain to the damping capacity in the composites; the change in CTE of Y 2 W 3 O 12 could cause the generation of damping peaks. Moreover, dislocation damping and interfacial damping are also main damping mechanisms in the investigated composites.
研究领域:
材料科学
·
力学
✓ 已验证
产品关联
DOI
高影响因子
Frontiers of Chemical Science and Engineering
·
2025
·Vol. 19
·期 5
·1-11
·
IF 4.5
Li Guojie,Liang Xuan,Zhang Junlong,Guo Bin,Mao Baoguang,Sun Hongming,Wang Aoxuan,Deng Qibo,Liu Chuntai
Lithium metal anode represents the ultimate solution for next-generation high-energy-density batteries but is plagued from commercialization by side reactions, substantial volume fluctuation, and the notorious growth of lithium dendrites. These hazardous issues are further aggravated under real-world conditions. In this study, a stable Al-Li/LiF artificial interphase with rapid ion transport pathways is created through a one-step chemical pretreatment process, effectively addressing these challenges simultaneously. As a consequence, the composite interfacial layer exhibits exceptional ionic conductivity, mechanical strength, and electrolyte wettability, ensuring swift Li + transfer diffusion while suppressing lithium dendrite growth. Remarkably, the Al-Li/LiF symmetric cell provides a cycle life exceeding 2300 h with a low polarization at 0.5 mA·cm −2 . Furthermore, its enhanced cycling stability and capacity retention as well as capacity utilization stability pairing with LiFePO 4 and LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathodes, highlighting the proposed approach as a promising solution for practical Li metal batteries.
研究领域:
材料科学
·
电化学
·
能源存储技术
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2024
·
IF 4.1
Ze-Min Zhao,Yu Zhang,Yu Chen,Jieying Jing,Wen-Ying Li
Nickel–aluminum (Ni–Al) spinel catalysts with distinct Ni/Al molar ratios were synthesized to construct Ni 2+ coordination sites. Owing to the favorable distribution of Ni 2+ coordination sites and the presence of suitable concentration of Ni 2+ in octahedral sites, Ni/Al-0.725 catalyst achieved an 86.1 % average yield of perhydrophenanthrene, which was higher than that obtained with Ni/Al-0.25 (6.3 %). Characterization results indicated that Ni 2+ of the Ni/Al-0.725 catalyst was present in octahedral sites and ∼ 40.4 % Ni 2+ was reduced to Ni, whereas the active Ni metal of Ni/Al-0.25 catalyst mainly comprised Ni 2+ occupying tetrahedral sites as precursors. Furthermore, the Ni/Al-0.725 catalyst exhibited the smallest Ni particle size (2.82 nm) and the largest Ni available surface (19.62 m 2 /g sample ), which helped alleviate competitive adsorption among aromatic hydrocarbons. The Ni reduced by the spinel catalysts was in an electron-deficient state, which enhanced the adsorption of polycyclic aromatic hydrocarbons.
研究领域:
催化
·
化学工程
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Xinxin Wang,Ruixue Meng,Shiyong Zhao,Zhenyu Jing,Yonghui Jin,Jie Zhang,Qiujiu Du,Xinxin Pi,Long Chen,Yanhui Li
To ensure the sustainable development of the nuclear industry, the effective capture of radioiodine from nuclear wastewater has attracted much attention. Herein, a novel MIL-88A(Al)/chitosan/graphene oxide (MCG) composite aerogel was prepared by using crosslinked chitosan and graphene oxide as the 3D network skeleton, and MIL-88A(Al) nanocrystalline particles were introduced into the skeleton by freeze-drying method. MIL-88A(Al) adsorption capacities for volatile and soluble iodine were 2.02 g g −1 and 850.00 mg g −1 , respectively. Owing to the synergistic effect of MIL-88A(Al), GO, CS, and the hierarchically porous structures of the MCG aerogel, the adsorption capacities for volatile and soluble iodine by the MCG aerogel were increased to 2.62 g g −1 and 1072.60 mg g −1 , respectively. Furthermore, the adsorption performance of the MCG aerogel for volatile and soluble iodine could be maintained at 83 % and 82 % after 5 cycles, suggesting excellent recoverability. Meanwhile, the adsorption mechanism studies showed the interactions between iodine and N H, Al O, and C O in MCG aerogel. Furthermore, the adsorption process is consistent with the Elovich kinetic and Sips isotherm models. MCG aerogels are potential candidates for enhanced radioiodine adsorption due to their high radioiodine capture performance and excellent recyclability.
研究领域:
材料科学
·
环境科学
·
核工业
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2016
·
IF 4.012
Da Wang,Congbiao Chen,Jungang Wang,Litao Jia,Bo Hou,Debao Li
High thermal conductive Al 2 O 3 @Al composite synthesized via metallic Al powders corrosion method has been applied as support for preparing Co/Al 2 O 3 @Al catalyst for high exothermic Fischer-Tropsch synthesis. The prepared Al 2 O 3 @Al composite is a hierarchical macro-mesoporous structure and consist of two parts, namely the inner metallic Al and the outer Al 2 O 3 with two kinds of morphologies. Increasing the concentration of the corrosive NaOH or extending the corrosion time could increase the specific surface area of the composite. For the prepared Co/Al 2 O 3 @Al, Co 3 O 4 phase is located on the outer plate-like Al 2 O 3 layer. The Co/Al-0.03-20 possesses higher CO conversion and C 5+ selectivity due to the appropriate cobalt reducibility, dispersion and high thermal conductivity . The thermal conductive coefficient of Co/Al 2 O 3 @Al catalysts is 13–98 times of conventional Co/Al 2 O 3 . Compared to Co/Al 2 O 3 , the Co/Al 2 O 3 @Al shows higher CO conversion and C 5+ selectivity as well as lower CH 4 and CO 2 selectivity, which is attributed to the macro-mesoporous structure and high thermal conductivity. In addition, because of the high thermal conductivity, no heat disperser should be used and a homogeneous temperature gradient maintains within the catalyst bed for Co/Al 2 O 3 @Al.
研究领域:
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2021
·
IF 5.455
Haibiao Yu,Xiu Jia,Peng Wang,Ying Xiong,Weijun Shan,Congge Zhang,Zhimeng Song
A series of x wt%Al-SBA-15 catalysts prepared by modified wetness impregnation was investigated for γ-valerolactone (GVL) decarboxylation to butene . It was found that the impregnation of Al species not only remained the ordered mesoporous structure of parent SBA-15, but also created large amounts of Brønsted and Lewis acid sites on the surface of catalyst. The considerable amount of solid acid sites and the suitable Brønsted/Lewis acid ratio endowed 2.23 wt%Al-SBA-15 catalyst an excellent catalytic performance. Under the optimized conditions, the GVL conversion and butene yield can reach 99.8% and 96.6% at 320 °C, respectively. Mechanism studies indicated that the decarboxylation of γ-protonated PEA controlled speed of the whole reaction. Moreover, the catalytic activity of regenerated 2.23 wt%Al-SBA-15 catalyst was satisfactory after eight cycle tests, and the butene yield could still reach 92.2%.
研究领域:
催化化学
·
生物质转化
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
OPTICAL FIBER TECHNOLOGY
·
2025
·
IF 2.7
Xuesong Zhang,Yue Feng,Weixiang Yuan,Haodong Wu,Tao Shen
The detection of ultra-low concentrations of lithium ions (Li + ) is of paramount importance for protecting human health and preserving the ecological environment. This paper proposes a fiber-optic sensor based on lithium/aluminum layered double hydroxides (Li/Al-LDHs) modified optical microfiber coupler (OMC). Firstly, the optimal diameter of the OMC is determined through simulation analysis to optimize the sensor parameters. Secondly, functional group functionalization is employed to facilitate a robust binding of the Li/Al-LDHs to the surface of the optical fiber. Lastly, the efficacy of the sensor in detecting low concentrations of Li + was validated through experimental means. The results demonstrated that the sensor exhibited a maximum detection sensitivity of 334.222 nm/μM and a limit of detection (LOD) of 1.272 nM within the range of 1–10 nM, exhibiting good linearity (R 2 = 0.986). Furthermore, the sensor displayed excellent stability, selectivity and response time, indicating its potential for application in the detection of Li + concentration in aqueous environments.
研究领域:
环境科学
·
光学传感
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS CHEMISTRY AND PHYSICS
·
2025
·
IF 4.7
Ruofan Wang,Yanfu Yan,Wenjun Li,Zhiming Li
Cu–Al soft soldering plays a crucial role in the fabrication of Cu–Al composites. In this study, a new rosin-type flux for Cu–Al direct soldering was synthesized, and G-1 (Sn42Bi58 paste) and G-2 (Sn64.7Bi35Ag0.3 paste) soft soldering pastes were prepared. The results of flux physicochemical tests are as follows: density 1.11 g/cm 3 , pH 5.2, viscosity 32 Pa s, and non-corrosive to the copper plate. These are in line with the requirements for soldering applications. The wettability test results show that G-1 and G-2 displayed good wettability on the Cu and Al plates. This is in line with the standard Cu–Al soft soldering paste. The mechanical property test showed that G-2 had better mechanical properties than G-1, with a tensile strength of 112.57 MPa. SEM revealed that the IMC (intermetallic compound) layer of G-1 was flatter than that of G-2. This is closely related to the fact that the Ag in Sn64.7Bi35Ag0.3 powders can reduce the enrichment of metallic Bi and refine the grains.
研究领域:
材料科学
·
焊接工程
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）