MATERIALS RESEARCH BULLETIN
·
2012
·Vol. 47
·期 11
·3277-3282
·
IF 2.105
Jing Bo Zhang,Xiao Ning Li,Shou Li Bai,Rui Xian Luo,Ai Fan Chen,Yuan Lin
Well-crystallized one-dimensional (1D) SnO 2 nanobelts were in situ prepared using a simple water-assisted chemical vapor deposition (CVD) method. The small Sn particles with Au-modifications were used as source materials instead of big size Sn grains to ensure the high yield of SnO 2 belts. The Au layer was modified on the small Sn particles by treating Sn powders in HAuCl 4 solution combined with the UV irradiation. The as-prepared SnO 2 nanobelts were characterized by SEM, HRTEM, XRD, EDS and XPS. These results indicate that the growth temperature plays an important role in controlling the length-to-width ratio of nanobelts. The length-to-width ratio decreases with the growth temperature from 850 °C to 1000 °C. The nanobelts prepared at 850 °C shows a single-crystalline tetragonal rutile phase with a high length-to-width ratio (approximately tens of microns in length and 40–70 nm in width). However, below 850 °C, nanobelts cannot be formed. The as-prepared nanobelts exhibited excellent sensing properties compared with SnO 2 nanoparticles and high sensing selectivity towards NO 2 . The high sensing selectivity to NO 2 is attributed to the oxygen vacancies presenting in the as-prepared nanobelts.
研究领域:
材料科学
·
纳米技术
·
传感器学
·
无机化学
·
半导体材料
✓ 已验证
DOI
高影响因子
Small
·
2022
·Vol. 18
·期 29
·2202622
·
IF 15.153
Hao Zhu,Zixuan Chen,Yun Chen,Jun-Jie Zhu
Quantifying the binding kinetics and affinities of protein–small molecule interactions is critical for biomarker validation, drug discovery, and deep understanding of various biological processes at the molecular-scale. Novel approaches are demanded as most common label-free techniques are mass-sensitive, which are not suitable for the detection of small molecule interactions. Here, an optical imaging platform is developed to measure the binding kinetics of both protein–small molecules and protein–ions based on monolayer MoS 2 , an ultra-thin 2D material whose optical absorption is extremely sensitive to charge. A model is established to calibrate the optical response due to the charged analyte binding and it is applied to quantify the interactions between abl1 kinase and different small-molecule inhibitors. Such a presented method is capable of distinguishing different inhibitors binding to a wild or mutated kinase, which provides guidance for drug evaluation and drug mechanism exploration. The binding kinetics of calcium ions to calmodulin is also measured, further broadening the application field of the method. In addition, the imaging capability allows mapping the local binding kinetics of the molecular interactions with a high resolution, which reveals visible spatial variability and offers a promising tool for studying heterogeneous local interfacial interactions.
研究领域:
分子生物学
·
药物发现
·
生物传感器
·
化学生物学
·
生物物理
·
转化医学
·
纳米生物技术
✓ 已验证
DOI
高影响因子
PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION
·
2018
·Vol. 35
·期 4
·1700471
·
IF 4.384
Shanliang Song,Chuanxi Wang,Yue Zhao,Tantan Hu,Xinxin Zhou,Tianxin Zhao,Minghui Yang,Quan Lin
A dual-emission ratiometric fluorescent sensing film for metal ion detection is designed. This dual-emission film is successfully prepared from chitosan, graphitic carbon nitride (g-C 3 N 4 ), and gold nanoclusters (Au NCs). Here, it is shown that the g-C 3 N 4 not only serves as the fluorescence emission source, but also enhances the mechanical and thermal stability of the film. Meanwhile, the Au NCs are adsorbed on the surface of chitosan film by the electrostatic interaction. The as-prepared dual-emission film can selectively detect Cu 2+ , leading to the quench of red fluorescence of Au NCs, whereas the blue fluorescence from g-C 3 N 4 persists. The ratio of the two fluorescence intensities depends on the Cu 2+ concentration and the fluorescence color changes from orange red to yellow, cyan, and finally to blue with increasing Cu 2+ concentration. Thus, the as-prepared dual-emission film can be worked as ratiometric sensing paper for Cu 2+ detection. Furthermore, the film shows high sensitivity and selectivity, with low limit of detection (LOD) (10 ppb). It is observed that this novel gold-cluster-based dual-emission ratiometric fluorescent sensing paper is an easy and convenient way for detecting metal ions. It is believed that this research work have created another avenue for the detection of metal ions in the environment.
研究领域:
分析化学
·
环境科学
·
材料科学
·
纳米技术
·
生物传感器
·
环境监测
·
分子探针
✓ 已验证
DOI
高影响因子
POLYMER BULLETIN
·
2016
·Vol. 74
·期 1
·75-90
·
IF 1.371
Chen Xiuqiong,Yan Huiqiong,Shi Zaifeng,Feng Yuhong,Li Jiacheng,Lin Qiang,Wang Xianghui,Sun Wei
A novel biosensor based on electro-co-deposition of myoglobin (Mb), sodium alginate (SA), Fe 3 O 4 -graphene (Fe 3 O 4 -GR) composite on the carbon ionic liquid electrode (CILE) was fabricated using Nafion as the film forming material to improve the stability of protein immobilized on the electrode surface, and the modified electrode was abbreviated as Nafion/Mb-SA-Fe 3 O 4 -GR/CILE. FT-IR and UV–vis absorption spectra suggested that Mb could retain its native structure after being immobilized in the SA-Fe 3 O 4 -GR composite film. The electrochemical behavior of the modified electrode was studied by cyclic voltammetry, and a pair of symmetric redox peaks appeared in the cyclic voltammograms, indicating that direct electron transfer of Mb was realized on the modified electrode, which was ascribed to the good electrocatalytic capability of Fe 3 O 4 -GR composite, the good biocompatibility of SA and the synergistic effects of SA and Fe 3 O 4 -GR composite. The electrochemical parameters of the electron transfer number ( n ), the charge transfer coefficient ( α ) and the electron transfer rate constant ( k
s ) were calculated as 0.982, 0.357 and 0.234 s −1 , respectively. The modified electrode exhibited good electrocatalytic ability to the reduction of trichloroacetic acid (TCA) with wide linear range from 1.4 to 119.4 mmol/L, low detection limit as 0.174 mmol/L (3 σ ), good stability and reproducibility.
研究领域:
生物传感器
·
电化学
·
蛋白质电化学
·
纳米材料
·
生物相容性材料
·
分子诊断
·
转化医学
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2023
·
IF 8.4
Likai Hou,Zhongjun Liang,Xu Fan,Jian Yu,Fubing Bao
Many soft coiled actuators are mimic the desirable structures of plant tendril. Here, we present a facile microfluidic spinning method to fabricate self-coiling Janus microfiber actuator with tunable morphology, spontaneous coiling performance and reversible traction property. By adjusting the component of hydrogel Janus fiber in a microfluidic spinning device with theta-shaped channels, tens of hundreds of homogeneous coils can be spontaneously and rapidly generated due to asymmetric contraction upon dehydration process, and three different forms of coiled fibers with various screw diameters are presented. Furthermore, the coiled Janus microfiber with hygroscopic properties possesses a reversible coiling/uncoiling performance under humidity gradients, which can serve as a micro-actuator to lift a certain weight with enough tensile strain and long-range tractive displacement. In addition, local reversible coiling/uncoiling morphing is achieved under water contact and near infrared light optothermal stimulations. As a verification of this coiled microfiber actuator, a smart switch is designed to control different colored LED lights for sensing an ambient moisture content.
研究领域:
生物医学工程
·
软体机器人
·
功能高分子材料
·
微纳制造
·
生物传感器
·
刺激响应材料
✓ 已验证
DOI
高影响因子
Small
·
2024
·Vol. 21
·期 5
·2408929
·
IF 13
Xue Jiao Zhao,Zhi Hao Zhao,Zhong Lin Wang,Guang Zhu,Jie Wang
Triboelectric nanogenerators (TENGs), among the most simple and efficient means to harvest mechanical energy, have great potential in renewable energy utilization. While the output performance of TENGs is still not high enough, which limits its practical application. Here, a poly(vinylidene fluoride) (PVDF)/fluorinated ethylene propylene nanoparticles (FEP NPs) porous nanofiber (PFPN) membrane with waterproof, breathable, surface superhydrophobic and high tribo-negative properties is proposed for achieving high-performance of TENGs. The PFPN-based solid–solid contact PFPN-TENG achieved an optimal electric output with a net tribo-charge density of 294 µC m −2 , which is 42.2% more than that of polytetrafluoroethylene (PTFE) film. The PFNP membrane can maintain the best performance with almost no attenuation after 142680 working cycles. Based on its excellent triboelectric characteristics, the PFPN membrane shows its excellent performance for self-powered body motion sensing and mechanical energy harvesting. A flexible solid–liquid contact PFPN-TENG can achieve high electrical output with an average volume power density of ≈544.1 W m −3 by harvesting water wave energy. Such excellent performance of the PFPN membrane makes it a potential candidate to promote the power density of TENGs in harvesting blue water wave energy.
研究领域:
纳米能源材料
·
柔性电子学
·
生物医学工程
·
可穿戴设备
·
环境能量收集
✓ 已验证
DOI
高影响因子
Small
·
2019
·Vol. 15
·期 48
·1901527
·
IF 10.856
Zhaofeng Zhai,Bing Leng,Nianjun Yang,Bing Yang,Lusheng Liu,Nan Huang,Xin Jiang
Tremendous demands for highly sensitive and selective nonenzymatic electrochemical biosensors have motivated intensive research on advanced electrode materials with high electrocatalytic activity. Herein, the 3D-networked CuO@carbon nanowalls/diamond (C/D) architecture is rationally designed, and it demonstrates wide linear range (0.5 × 10 −6 –4 × 10 −3 m ), high sensitivity (1650 µA cm −2 m m −1 ), and low detection limit (0.5 × 10 −6 m ), together with high selectivity, great long-term stability, and good reproducibility in glucose determination. The outstanding performance of the CuO@C/D electrode can be ascribed to the synergistic effect coming from high-electrocatalytic-activity CuO nanoparticles and 3D-networked conductive C/D film. The C/D film is composed of carbon nanowalls and diamond nanoplatelets; and owing to the large surface area, accessible open surfaces, and high electrical conduction, it works as an excellent transducer, greatly accelerating the mass- and charge-transport kinetics of electrocatalytic reaction on the CuO biorecognition element. Besides, the vertical aligned diamond nanoplatelet scaffolds could improve structural and mechanical stability of the designed electrode in long-term performance. The excellent CuO@C/D electrode promises potential application in practical glucose detection, and the strategy proposed here can also be extended to construct other biorecognition elements on the 3D-networked conductive C/D transducer for various high-performance nonenzymatic electrochemical biosensors.
研究领域:
生物医学工程
·
纳米医学
·
电化学传感
·
生物传感器
·
材料科学
·
分子诊断
·
转化医学
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2022
·
IF 5.518
Lei Sun,Meng Yang,Hao Guo,Tingting Zhang,Ning Wu,Mingyue Wang,Fan Yang,Junye Zhang,Wu Yang
Herein, covalent organic framework (COF) and covalent triazine framework (CTF) have been successfully combined for electrochemical sensing via carboxylated multi-walled carbon nanotubes (COOH-MWCNTs). The COF was synthesized from 1,3,5-tris-(4-formylphenyl) benzene (TFPB) and benzidine (BD), named TFPB-BD-COF. Meanwhile, CTF was synthesized by 1, 4-dicyanobenzene (DCB), then chemically activated with KOH at 700 °C to obtained chemically activated porous product, caCTF-1–700. A novel electrochemical sensor based on TFPB-BD-COF/caCTF-1–700/COOH-MWCNT composite was constructed for simultaneous detection of acetaminophen (ACOP) and 4-aminophenol (4-AP). The electrochemical behaviors of the ACOP and 4-AP on the TFPB-BD-COF/caCTF-1–700/COOH-MWCNT electrode were explored via differential pulse voltammetry (DPV) and cyclic voltammetry (CV). The fabricated TFPB-BD-COF/caCTF-1–700/COOH-MWCNT composite modified glassy carbon electrode (GCE) possessed outstanding electrocatalytic performance for the electro-oxidation of acetaminophen (ACOP) and 4- aminophenol (4-AP). Under optimal conditions, the linear ranges were 0.6–150 μM for ACOP and 4-AP, respectively, with the low detection limits of 0.053 μM and 0.075 μM, respectively. In addition, it also showed excellent selectivity, repeatability, reproducibility and stability. The proposed modified electrode was applied for the determination of ACOP and 4-AP in acetaminophen tablet and Yellow river water and obtained satisfactory recovery between 96.31~103.96% and 97.2~101.6%, respectively.
研究领域:
分析化学
·
电化学
·
生物传感器
·
药物分析
·
环境监测
·
材料科学
·
纳米技术
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2016
·
IF 2.822
Fang Long,Jing Wang,Zhaohui Zhang,Liang Yan
A novel magnetic molecularly imprinted electrochemical sensor (MMIP-sensor) combined with magnetic molecularly imprinted solid-phase extraction (MMISPE) was constructed for rapid and sensitive detection of tetrabromobisphenol S (TBBPS) in water samples. The magnetic molecularly imprinted polymer based on magnetic graphene/multi-walled carbon nanotubes hybrid composite (MMIP/Gr-MWCNTs) was prepared as MMISPE sorbet to separate and enrich TBBPS from complex system. Adsorption results showed that the MMIP/Gr-MWCNTs possessed excellent selective adsorption toward TBBPS with a maximum adsorption capacity of 17.83 mg g − 1 . The magnetic imprinted sensor based on the magnetic Gr-MWCNTs composite modified electrode was prepared by electropolymerization of dopamine monomer . The high sensitivity of the MMIP-sensor was attributed to the large specific surface area and excellent electrical conductivity of the magnetic Gr-MWCNTs composites. The detection limit of the MIP-sensor toward TBBPS was calculated as 2.1 × 10 − 11 mol L − 1 (S/N = 3). Under the optimum conditions, the MISPE-MMIP-sensor combination system provided 10–12 fold preconcentration than that of MMIP-sensor alone determination. The MISPE-MMIP-sensor was successfully used for detection of TBBPS in drinking water , rain water , lake water and tap water with recoveries of 88.4–98.8%.
研究领域:
分析化学
·
环境监测
·
电化学传感
·
分子印迹技术
·
水处理
·
污染物检测
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）