Advanced Materials Interfaces
·
2020
·Vol. 7
·期 7
·1901815
·
IF 4.948
Minglong Yang,Qiang Wei,Jianjun Li,Yao Wang,Hongfei Guo,Liya Gao,Li Huang,Xiaodong He,Yibin Li,Ye Yuan
Inspired by the traditional Chinese “pancake-making” method, the efficient electromagnetic interferences (EMI) shielding composite carbon films are conveniently obtained by assembling graphene oxide (GO) sheets, carbon nanotubes (CNTs), and Co/C nanocomposites into a laminated “nacre-like” structure. The developed composite carbon films are characterized by a shielding effectiveness (SE) up to ≈51 dB in X band with a small thickness of ≈34.3 µm. Moreover, the composite carbon film shows favorable flexibility and the SE values almost keep a constant after repeatedly bending test. These results demonstrate a promising approach to simply fabricate a flexible and highly efficient EMI shielding material.
研究领域:
材料科学
·
纳米科技
·
复合材料
·
电磁功能材料
·
柔性电子学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2014
·Vol. 4
·期 86
·46208-46213
·
IF 3.708
Yuqing Lin,Lianglu Hu,Linbo Li,Keqing Wang
This study describes a facile and effective one-pot route to synthesize structurally uniform and electrochemically active nickel hydroxide–graphene nanocomposites (Ni(OH)2–GN) and investigates the electrocatalytic activity toward the oxidation of insulin. Graphene here was used to tether Ni2+ precursor onto surfaces and eventually grow Ni(OH)2 nanoparticles to form hybrid materials. The synthetic Ni(OH)2–GN nanocomposite has a uniform surface distribution, which was characterized with scanning electron microscopy (SEM). Moreover, the composition of synthetic Ni(OH)2–GN nanocomposite was characterized by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR spectra). The Ni(OH)2–GN were electrochemically treated in 0.1 M NaOH solution through cyclic voltammograms, and then gradually transited into nickel oxyhydroxide–graphene nanocomposites (NiOOH–GN), which demonstrated high catalytic activity and improved stability to insulin oxidation. The steady-state current response increases linearly with insulin concentration from 800 nM to 6400 nM with a fast response time of less than 2 s and a detection limit of 200 nM. The excellent performance of insulin sensor, including long term stability, can be ascribed to the synergistic effects of the large surface area (resulting in high loading ability), dispersing ability and conductivity of graphene and the large surface-to-volume ratio and electrocatalytic activity of Ni(OH)2 nanoparticles.
研究领域:
生物医学工程
·
电化学传感
·
纳米医学
·
糖尿病诊断
·
分子诊断
✓ 已验证
DOI
高影响因子
ADVANCED POWDER TECHNOLOGY
·
2019
·Vol. 30
·期 9
·1920-1931
·
IF 3.25
Ting Wang,Bing–rui Li,Li–guang Wu,Yu–bing Yin,Bo–qiong Jiang,Ju–qing Lou
La 3+ - or Yb 3+ -doped TiO 2 supported on the surface of reduced graphene oxide were fabricated by adsorbed-layer nanoreactor synthesis (ANS) coupling with a solvothermal treatment to extend photocatalysis application in the advanced treatment of simulated wastewater with high salt concentration. Results showed that La 3+ or Yb 3+ could distribute in the TiO 2 lattice, only in ANS preparation with graphene oxide as the carrier, to replace Ti 4+ during the solvothermal treatment, thus introducing TiO 2 mixed-crystal and heterojunction structures in the catalysts. La 3+ or Yb 3+ caused lattice distortion structures and anionic vacancies in the TiO 2 lattice. The anionic vacancies (oxygen vacancies) might generate Ti 3+ in catalysts, thus enhancing visible-light response, due to impurity levels introduced by La 3+ or Yb 3+ . As the strong adsorption capability of the catalyst for phenol was not interfered by salt ions in the simulated wastewater, the catalysts could efficiently degrade phenol. The highest removal rate of phenol was approximately 90%.
研究领域:
环境科学
·
材料化学
·
光催化
·
水处理
·
纳米材料
·
表面化学
·
环境功能材料
✓ 已验证
DOI
高影响因子
ORGANIC ELECTRONICS
·
2019
·
IF 3.495
Xiangli Gao,Gaoyi Han,Yunzhen Chang,Ying Zhang,Honggang Li
To enhance the reduced graphene oxide hydrogels' capacitive performance, many modifiers are used to add doped element into the materials and improve the structure. The isomers of aminophenol which contain amino and hydroxyl groups on the benzene ring are employed as structure regulator and modifier to synthesize high-performance reduced graphene oxide hydrogels. The influences of preparation conditions including ratios of graphene oxide to aminophenol isomers, temperature, reaction times on the samples’ structure and properties have been investigated. The results show that the oligomer of o-aminophenol is formed on reduced graphene oxide sheets while the molecules of p, m-aminophenol are bound to the sheets; and that the hydrogel prepared in the presence of p-aminophenol has larger specific surface area, total pore volume , specific capacitance and good rate capability (74.0% of 427.0 F g −1 retains at 100 mV s −1 ) than other. The cells assembled by the optimized hydrogels exhibit the energy density of 14.07 Wh kg −1 at power density of 124.3 W kg −1 , and 4.96 Wh kg −1 at 6.78 kW kg −1 . Furthermore, 92.2% of initial capacitance can be retained after 20,000 cycles for the cells assembled by the optimal hydrogel. This kind of material may be found its use in energy storage field.
研究领域:
材料科学
·
纳米科技
·
电化学
·
能源存储
·
高分子化学
·
表面科学
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2017
·
IF 4.798
Hedong Chen,Zhoulu Wang,Xianhua Hou,Lijun Fu,Shaofeng Wang,Xiaoqiao Hu,Haiqing Qin,Yuping Wu,Qiang Ru,Xiang Liu,Shejun Hu
Carbon-coated core-shell structure artificial graphite@plasma nano-silicon@carbon (AG@PNSi@C) composite, applying as lithium ion battery anode material , has been prepared via spray drying method. The plasma nano-silicon (<100 nm), which contained amorphous silicon , was synthesized by radio frequency induction plasma system with the high temperatures processing capability and high quench rates. The artificial graphite in the composite acts as the core which supports the particle and provides electroconductivity , while PNSi attached on the surface of the core, enhances the specific capacity of the composite. The as prepared composite shows superior performance as anode in lithium-ion batteries, regarding to the initial Coulombic efficiency and cycle life. The initial Coulombic efficiency of AG@PNSi@C electrode is 81.0% with a discharge capacity of 553 mAh g −1 and a recharge capacity of 448 mAh g −1 . During cycling, AG@PNSi@C exhibits excellent performance with a very low capacity fading that the discharge capacity maintains 498.2 mAh g −1 and 449.4 mAh g −1 after 250 cycles and 500 cycles. AG@PNSi@C also shows enhanced resistance against high current density . Besides the remarkable electrochemical performances , the facile and mass-producible synthesis process makes the AG@PNSi@C composite very promising for its application in lithium-ion batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米材料
·
电池技术
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2019
·
IF 5.155
Guorong Hu,Jilin Wu,Ke Du,Zhongdong Peng,Ming Jia,Hao Yang,Yanbing Cao
The surface-fluorinated Li 4 Ti 5 O 12 nanowires/reduced graphene oxide composite is synthesized through a hydrothermal procedure. Lithium ion transport is promoted by forming a special morphology of lithium titanate nanowires, meanwhile, electronic transmission is facilitated by surface fluorination and conductive network of graphene coating. These three kinds of synergistic effects greatly improve the rate performance of lithium titanate . The surface-fluorinated Li 4 Ti 5 O 12 nanowires/reduced graphene oxide composite exhibits high specific capacities (167.5 mAh g −1 at 1 C and even 132.6 mAh g −1 at 10 C) and good cyclic stability (95% capacity remain after 300 cycles at 5 C). The influences of surface fluorination and graphene coating on electrochemical performance of lithium titanate are investigated in detail in terms of reversible capacity, cyclability and rate capability. Its excellent electrochemical properties make it become possible to be a potential anode material for high-rate lithium-ion batteries applied in high power facilities.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
锂离子电池
✓ 已验证
DOI
高影响因子
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
·
2017
·Vol. 19
·期 25
·16785-16794
·
IF 4.123
Wei Xia,Jun Zhao,Tao Wang,Li Song,Hao Gong,Hu Guo,Bing Gao,Xiaoli Fan,Jianping He
Polymer networks such as those of epoxy resin, as common protection materials, possess radiolytic oxidation degradation effects under gamma irradiation environment, which have a great accelerating effect on the ageing rate and severely limit their potential applications for metal protection in the nuclear industry. To overcome this, we report a simple scheme of anchoring crystalline ceria nanoparticles onto graphene sheets (CG) and incorporate it into the epoxy resin, followed by thermal polymerization to obtain CeO2/graphene-epoxy nanocomposite coating (CGNS). We had proven that graphene might act as “interwalls” in the epoxy matrix, which will result in space location-obstruct effect as well as absorb the radicals induced by γ-ray irradiation. Moreover, owing to the interconversion of cerium ions between their +3 and +4 states coupled with the formation of oxygen vacancy defects, electron spin resonance (ESR) detection shows that CeO2/graphene (CG) could act as a preferable radical scavenger and achieve better performance in trapping radicals than single graphene based composite. Electrochemical data strongly demonstrate that CeO2/graphene is capable of maintaining the anti-corrosion properties under gamma irradiation environment. Therefore, the designed hybrid CeO2/graphene-epoxy composite can be considered as potential candidates for protective coatings in nuclear industry.
研究领域:
材料科学
·
核工业防护
·
高分子化学
·
纳米复合材料
·
电化学防腐
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2021
·Vol. 47
·期 14
·20310-20316
·
IF 4.527
Yang Yan,Linlin Zang,Tianwei Dou,Haicheng Li,Liguo Sun,Yanhong Zhang
In this work, we prepared a hollow Co 3 O 4 nanoparticles (NPs) immobilized reduced graphene oxide (rGO)/carbon monolith (HCGCM) via a one-step carbonization method. The doping of nanomaterial and transition metal oxide can improve the poor conductivity and low capacitance of pure carbonaceous materials. The optimal addition concentration of polystyrene microspheres as a template provided the HCGCM composite with a hierarchical pore structure and a large specific surface area (1600 cm 2 /g), which is conducive to generating sufficient electroactive sites. At the same time, three dimensional (3D) interconnected pores shorten ion transport paths and reduced diffusion resistance of ions. Due to the existence of pseudocapacitive behavior, the HCGCM composite, as an electrode material working in a three-electrode system, achieved a high capacitance value of 1106 F/g at a current density of 1 A/g. In two-electrode system, the asymmetric supercapacitor had excellent stability performance and remained about 86.7% capacitance after 5000 cycles test. Moreover, it also exhibited a maximum energy density of 66.7 Wh/kg at power density of 750 W/kg. Thus, the strategy of manufacturing 3D porous electrodes is beneficial to improve the overall electrochemical performance of supercapacitors .
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
ANALYTICAL BIOCHEMISTRY
·
2015
·
IF 2.219
Taotao Feng,Xiaoyu Chen,Xiuwen Qiao,Zhao Sun,Haining Wang,Yu Qi,Chenglin Hong
In this work, a simple electrochemical immunosensor was developed for the detection of carcinoembryonic antigen (CEA) based on rhombic dodecahedral Cu 2 O nanocrystals–graphene oxide–gold nanoparticles (rCu 2 O–GO–AuNPs). GO as the template and surfactant resulting in rCu 2 O exhibit improved rhombic dodecahedral structure uniformity and excellent electrochemical performance. Moreover, GO was found to be able to effectively improve the long stability of rCu 2 O on the electrode response . Under optimal conditions, the immunosensor showed a low limit of detection (0.004 ng ml −1 ) and a large linear range (0.01–120 ng ml −1 ). This work presents a potential alternative for the diagnostic applications of GO-supported special morphology materials in biomedicine and biosensors.
研究领域:
生物医学工程
·
肿瘤学
·
纳米医学
·
电化学分析
·
诊断学
·
生物传感器
✓ 已验证
DOI
高影响因子
MATERIALS LETTERS
·
2014
·
IF 2.269
Yaguang Yuan,Yanping Yuan,Nan Zhang,Yanxia Du,Xiaoling Cao
Capric–myristic–palmitic acid ternary eutectic mixture (CA–MA–PA) was prepared as phase change material (PCM). A novel composite PCM of CA–MA–PA/expanded graphite (EG) with an optimum mass ratio (CA–MA–PA:EG=13:1) was prepared by uniformly absorbing CA–MA–PA into the porous network structure of the EG. The melting and freezing temperatures of CA–MA–PA/EG composite PCM were measured by differential scanning calorimeter as 18.61 °C and 16.58 °C, respectively, while the melting and freezing latent heats were 128.2 J/g and 124.5 J/g, respectively. The thermal conductivity of the CA–MA–PA/EG composite PCM was measured as 3.67 W/m K and thus the thermal storage and release rates were significantly increased. The thermal cycling test results showed that CA–MA–PA/EG composite PCM has a good thermal reliability. All the above results show that the CA–MA–PA/EG composite PCM is a potential solution for latent heat storage system.
研究领域:
材料科学
·
能源化学
·
热物理
·
功能材料
·
储能技术
✓ 已验证
DOI
高影响因子
Small
·
2023
·Vol. 20
·期 17
·2308632
·
IF 13.3
Shunlong Ju,Qing Qiao,Tian Xu,Zhongchen Zhao,Tengfei Zhang,Guanglin Xia,Xuebin Yu
Constructing robust anode with strong aluminophilicity and rapid desolvation kinetics is essential for achieving high utilization, long-term durability, and superior rate performance in Al metal-based energy storage, yet remains largely unexplored. Herein, molybdenum nanoparticles embedded onto nitrogen-doped graphene (Mo@NG) are designed and prepared as Al host to regulate the deposition behavior and achieve homogeneous Al plating/stripping. The monodispersed Mo nanoparticles reduce the desolvation energy barrier and promote the deposition kinetics of Al. Additionally, Mo nanoparticles act as aluminophilic nucleation sites to minimize the Al nucleation overpotential, further guiding uniform and dense Al deposition. As a result, the dual-functional Mo@NG endows Al anodes with low voltage hysteresis, reversible Al plating/stripping with high coulombic efficiency, and excellent high-rate capability under 5 mA cm −2 . Moreover, the as-designed Al metal full batteries deliver a high capacity retention of 92.8% after 3000 cycles at 1 A g −1 . This work provides an effective solution to optimize the electrochemical properties of Al metal anode from the perspective of desolvation and deposition reactions, towards the development of high-safety and long-cycling aluminum-ion batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米技术
·
金属负极
·
电池化学
·
界面工程
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2016
·
IF 4.803
Dandi Zhou,Min Wang,Jing Dong,Shiyun Ai
The rapid and sensitive detecting technique for subgroup J of avian leukosis viruses (ALVs-J) needs to be developed as soon as possible in order to not only reduce economic losses but also ensure the food safety. In this paper, a novel electrochemical immunosensor was built based on mesoporous graphitic carbon nitride (mpg-C 3 N 4 ). Mpg-C 3 N 4 was used as the sensor platform to bond with the primary antibodies (Ab 1 ). The compound of thionine and mpg-C 3 N 4 (Th-mpg-C 3 N 4 ) was synthesized for the first time to serve as the electroactive probe as well as the carrier of secondary antibodies (Ab 2 ). Compared to bulk g-C 3 N 4 , mpg-C 3 N 4 possesses larger specific surface area, smaller electrochemical resistance and abundant active sites. So the proposed electrochemical immunosensor exhibited amplified detective signals which realized the sensitive detection of ALVs-J. Under the opitimized conditions, the immunosensor exhibited outstanding analytical performance for the detection of ALVs-J whose titer ranged from 10 2.08 to 10 4.0 TCID 50 /mL (TCID 50 : 50% tissue culture infective dose) with a low detection limit of 120 TCID 50 /mL (S/N = 3). The sensitivity of the immnosensor was 6.15 μA/(TCID 50 /mL). This high sensitive immunosensor also displayed good selectivity, reproducibility and stability. Last but not least, this new strategy may be of great promise for clinic application in the future.
研究领域:
生物医学工程
·
免疫学
·
病毒学
·
分析化学
·
纳米生物技术
✓ 已验证
DOI
高影响因子