PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION
·
2018
·Vol. 36
·期 1
·1800077
·
IF 4.384
Yiqi Zhuang,Linlin Liu,Xiaoyan Wu,Yu Tian,Xuehong Zhou,Shuping Xu,Zengqi Xie,Yuguang Ma
The “far-field” surface plasmon resonance (FSPR) of metal nanoparticles, which have built a facile way to emission enhancement of red, green, blue, and white with nice reproducibility, has big potential application in solution-processed organic light-emitting diodes (OLEDs). According to the theory of the “far-field” effect, the reflectivity of the metal surface and the phase shift at the reflection play an important role in enhancing ratio, which strongly relate to the size and shape of nanoparticles. In this work, gold nanospheres with different sizes and nanorods are synthesized in order to determine the size and shape effect of FSPR. The results demonstrate that the one with higher reflectivity in a certain range induces a better emission enhancement in the luminous efficiency and the maximum brightness. The nanoparticles with bigger sizes and shape of rods have higher reflectivity, which is consistent with the simulation based on FSPR effect. The phase shifts of different nanoparticles are optimized by the distance between gold nanoparticles and emitters. The metal NPs with a high reflectivity and the applicable phase shift will have big potential for the emission enhancement in OLEDs.
研究领域:
纳米光学
·
材料科学
·
光电子学
·
表面等离子体学
·
有机光电子器件
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2018
·
IF 3.779
Pan Liu,Jiguang Liu,Jiahui Liu,Xia Dong,Rui Wang
Using nitrogen, the morphological evolution of iron oxide/alkoxide particles was investigated by altering the reaction temperature in a one-pot solvothermal synthesis , resulting in a series of particles with different shapes, such as smooth sheet-like, rough sheet-like and cubic particles. The particle shape began to transform at 180 °C due to the altered crystallization and compositions, accompanied by the evolution of the magnetic properties without post-calcination. Based on the above research, large flower-like particles could be prepared by a two-step heating process. In virtue of the structural and morphological advantages, the flower-like particles were applied in fabricating a superwetting surface.
研究领域:
材料化学
·
纳米科技
·
表面科学
·
功能材料
·
物理化学
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2019
·
IF 5.155
Guorong Hu,Jilin Wu,Ke Du,Zhongdong Peng,Ming Jia,Hao Yang,Yanbing Cao
The surface-fluorinated Li 4 Ti 5 O 12 nanowires/reduced graphene oxide composite is synthesized through a hydrothermal procedure. Lithium ion transport is promoted by forming a special morphology of lithium titanate nanowires, meanwhile, electronic transmission is facilitated by surface fluorination and conductive network of graphene coating. These three kinds of synergistic effects greatly improve the rate performance of lithium titanate . The surface-fluorinated Li 4 Ti 5 O 12 nanowires/reduced graphene oxide composite exhibits high specific capacities (167.5 mAh g −1 at 1 C and even 132.6 mAh g −1 at 10 C) and good cyclic stability (95% capacity remain after 300 cycles at 5 C). The influences of surface fluorination and graphene coating on electrochemical performance of lithium titanate are investigated in detail in terms of reversible capacity, cyclability and rate capability. Its excellent electrochemical properties make it become possible to be a potential anode material for high-rate lithium-ion batteries applied in high power facilities.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
锂离子电池
✓ 已验证
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2017
·
IF 6.065
Jianxian Zeng,Zhihui Dong,Zhe Zhang,Yuan Liu
A surface-grafted imprinted ceramic membrane (IIP-PVI/CM) for recognizing molybdate (Mo(VI)) anion was prepared by surface-initiated graft-polymerization. Firstly, raw alumina ceramic membrane (CM) was deposited with SiO 2 active layer by situ hydrolysis deposition method. Subsequently, γ-methacryloxy propyl trimethoxyl silane (MPS) was used as a coupling agent to introduce double bonds onto the SiO 2 layer (MPS-CM). Then, 1-vinylimidazole (VI) was employed as a functional monomer to graft-polymerization onto the MPS-CM (PVI-CM). During the graft-polymerization, the influence factors of grafting degree of PVI were investigated in detail. Under optimum conditions (monomer concentration 20 wt%, temperature 70 °C, initiator amount 1.1 wt% and reaction time 8 h), the grafting degree of 20.39 g/100 g was obtained. Further, Mo(VI) anion was used as a template to imprint in the PVI-CM by employing 1,6-dibromohexane as a cross-linking agent, and then Mo(VI) was removed, obtaining the IIP-PVI/CM with many imprinted cavities for Mo(VI). Thereafter, static adsorption and dynamic separation properties of IIP-PVI/CM for Mo(VI) were studied. Results indicate that IIP-PVI/CM shows a specific selectivity for Mo(VI) with the adsorption capacity of 0.69 mmol/100 g, and the selectivity coefficient of IIP-PVI/CM is 7.48 for molybdate to tungstate anions. During the dynamic separation, IIP-PVI/CM has also good selectivity for separation of Mo(VI) and W(VI) anions.
研究领域:
环境化学
·
材料科学
·
分离科学
·
高分子化学
·
无机分析化学
✓ 已验证
DOI
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2019
·
IF 4.561
Pan Zhang,Lemeng Wang,Chunjie Lu,Mengying Li,Shujun Yu,Dong Fu
The surface tensions of 2‑diethylaminoethanol (DEAE)‑ N ‑(2‑aminoethyl)ethanolamine (AEEA), DEAE‑ N ‑methyl‑1,3‑propane‑diamine (MAPA) and DEAE‑1,4‑butanediamine (BDA) aqueous solutions have been measured by using the BZY-1 surface tension meter. The mass fractions of DEAE and AEEA/MAPA/BDA respectively ranged from 0.300 to 0.500 and 0.050 to 0.150. The temperature ranged from 303.2 K to 323.2 K. A thermodynamic equation was proposed to model the surface tension and the calculated results agreed well with the experiments. The effects of temperature and mass fraction of amines on the surface tension were demonstrated on the basis of experiments and calculations. The surface thermodynamics including surface enthalpy and surface entropy of blended amine aqueous solutions were also determined, and their temperature and mass fraction dependences were analyzed.
研究领域:
物理化学
·
溶液化学
·
热力学
·
表面科学
·
化工材料
✓ 已验证
DOI
高影响因子
Russian Journal of Physical Chemistry A
·
2016
·Vol. 90
·期 2
·399-405
·
IF 0.597
Wang Aiqing,Cui Yuezhi,Tao Furong,Gu Caihong,Wang Shijie,Li Tianduo
A functionalized glass sensor ( G-P ) was prepared for detecting nitroaromatic compounds (NACs) by chemically immobilizing a conjugated polymer P on the surface of a glass slide. The monolayer film sensor had several advantages: the signal amplification effect of conjugated polymers, no leakage of sensing materials in solution, and good permeability for the analytes. Fluorescence quenching studies demonstrated that the sensor was highly sensitive to NACs. When the DNT concentration was 1.03 × 10 –7 mol/L, the quenching efficiency (1– I / I
0 ) of G-P reached 52.8%. Moreover, the excellent properties of reversibility, selectivity and sensitivity indicated the glass G-P might be a promising sensor in the field of explosives detection.
研究领域:
分析化学
·
材料科学
·
传感器技术
·
环境监测
·
安全检测
·
高分子化学
·
光学传感
✓ 已验证
DOI
高影响因子
Small
·
2022
·Vol. 18
·期 16
·2107346
·
IF 15.153
Ze Feng,Shan Zhang,Xiaobing Huang,Yurong Ren,Dan Sun,Yougen Tang,Qunxuan Yan,Haiyan Wang
Nickel-rich cathode materials, owing to their high energy density and low cost, are considered to be one of the cathodes with the most potential in next-generation lithium-ion batteries. Unfortunately, this kind of cathode with highly active surface is easy to react with H 2 O and CO 2 when exposed to ambient air, resulting in the formation of lithium impurities and interfacial phase transition as well as deterioration of the electrochemical properties. In this work, the evolution mechanism of the structure and interface of LiNi 0.8 Co 0.1 Mn 0.1 O 2 during air-exposure is systematically investigated. Furthermore, a facile reviving strategy is proposed to restore the degraded LiNi 0.8 Co 0.1 Mn 0.1 O 2 by using LiPO 3 as the repair agent. The lithium impurities on the surface of the degraded sample can transform into the repair/coating layer, and part of the rock salt phase on the subsurface can revive to layered phase after repair heat treatment. As a result, the optimized cathode delivers an initial discharge capacity of 198.3 mAh g −1 at 0.1C and a capacity retention of 85.5% after 50 cycles. Although slightly lower than the bare sample (201 mAh g −1 and 88%), they are obviously higher than the exposed samples (166.5 mAh g −1 and 40.4%). The regenerated electrochemical properties should be attributed to the multifunctional repair layer that can efficiently reduce the surface lithium impurities, prevent the corrosion of electrolyte, and improve the interfacial Li + diffusion kinetics. This work can effectively reduce the waste of the degraded Ni-rich ternary materials and realize the transformation of “waste” into wealth.
研究领域:
材料科学
·
电化学
·
能源存储
·
电池技术
·
界面工程
✓ 已验证
DOI
高影响因子
Small
·
2019
·Vol. 15
·期 52
·1905451
·
IF 10.856
Lijun Ji,Mindong Gong,Tong Xu,Jun Gu,Xu Jiang,Taotao Liang,Yu Chen,Qingren Liu
The interactions of ions and molecules with material surface are highly dependent on the surface properties of the material. Therefore, the distribution of ions or molecules near the material surface may be affected by the surface properties. This phenomenon can be significant enough for controlling the structure of a material synthesized in the sub-micrometer scale confinement space of a template. This work confirms that inverse opals are perfect templates for offering confinement space, while their different surface properties can strongly affect ion and block copolymer distribution in the confinement space. This surface effect principle can be used for the controlled synthesis of colloids with complex composition. As an example, four kinds of mesoporous magnetic bioactive glass colloids with ordered mesopores, core–shell structure, open surface pores, or disordered mesopores are prepared by using polystyrene and carbon inverse opal templates. This work reveals that inverse opal templates possess great advantage in controlled synthesizing colloidal structures due to their surface effect on ions and molecules and confinement space.
研究领域:
生物材料学
·
纳米医学
·
组织工程
·
药物递送
·
生物矿化
·
胶体化学
✓ 已验证
DOI
高影响因子
DIAMOND AND RELATED MATERIALS
·
2023
·
IF 4.1
Chong Chen,Jiacan Shao,Shaojie Qu,Li Xie,Wenjian Jiang,Keying Zhang,Xin Zhuo,Hongwei Shi,Hongyan Wang,Li Sun,Li Zhang,Guang Zhu
Hollow carbon nanosheets with predominant mesopores have been demonstrated as a promising electrode material for supercapacitor , but their low specific surface area with relatively low micropore proportion limits their specific capacitance and energy density . Herein, we develop a novel extrusion plant microtube strategy to synthesize micron-sized nitrogen-doped hollow porous carbon nanosheets (MNHPCS) from dandelion fluff having the specific natural thin-wall and hollow tubular bundled structure through high-pressure extrusion, carbonization and KOH activation. The optimized MNHPCS displays strutted bilayer nanosheet structure, large SSA of 1593 m 2 g −1 , high micoporosity of 71.2 % and high heteroatom content (5.2 at.% for N, 7.0 at.% for O). Importantly, MNHPCS prepared by the new technique overcomes the drawbacks of hollow carbon nanosheets and presents an excellent capacitance of 378 F g −1 at 0.5 A g −1 and rate capability of 57 % at 80 A g −1 in 6 M KOH. Furthermore, the energy density of MNHPCS//MNHPCS based supercapacitor in EMIMBF 4 can reach up to 84 Wh kg −1 . Most importantly, MNHPCS can be easily achieved from various plant wastes having hollow tubular structure, which would provide a clearly method on selecting plant precursors for producing hollow porous carbon nanosheets applied on supercapacitors.
研究领域:
材料科学
·
纳米技术
·
电化学
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2024
·Vol. 35
·期 2
·140
·
IF 2.8
Ma Di,He Hao,Huang Xinglan,Wang Jingcheng,Hu Xuebu
The inhomogeneous plating/stripping of zinc and side reactions originating from the dissolution of the cathode material in water lead to the poor stability of zinc anode, which inevitably limits the practical application of zinc-based aqueous batteries. Therefore, a novel hydrogel electrolyte made of hydroxyethyl cellulose/polyacrylamide (HEC/PAM) with a 3D network-like structure is synthesized by radical polymerization and cross-linking reinforcement. Thanks to the porous crosslinked network and massive hydrophilic groups, the electrolyte has high ion conductivity of 3.17 × 10 –2 S cm −2 and decomposition voltage of 2.6431 V. The ion conductive hydrophilic groups facilitate the interfacial compatibility of the electrode with the electrolyte and stabilize zinc plating/stripping, which suppresses the formation of zinc dendrites. Meanwhile, the hydrogel electrolyte effectively alleviates the dissolution of the positive electrode and the occurrence of side reactions, and subsequently improves the stability of the electrode. As a result, the assembled Zn–Zn symmetric cell with HEC/PAM hydrogel electrolyte is stable without short circuit and rapid increase of overvoltage at 5 mA cm −2 . The polarization voltage of the assembled Zn–Cu half-cell is 59.2 mV and initial coulomb efficiency reaches 94.3%. The assembled Zn–V 2 O 5 ·nH 2 O/CNT full cell delivers an excellent cycling stability of 186.9 mAh g −1 at 0.5 A g −1 after 500 cycles with a high-capacity retention of 92.5% (only 52.1% in aqueous system). The new idea is provided for further development of functional hydrogel electrolytes in zinc-ion batteries.
研究领域:
电化学
·
能源材料
·
功能高分子
·
电池技术
·
界面化学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 62
·57009-57012
·
IF 3.289
Di Wu,Jing Ye,Lie Chen,Yongzheng Wang,Kai Fang,Mingjiang Xie,Luming Peng,Xuefeng Guo,Weiping Ding
Crystalline mesoporous γ-Fe2O3 with a high surface area was prepared by a novel solvent-free route. This material exhibits a high reversible capacity with superior cycle performance and an exceptional high-rate capability as an anode material for Li-ion batteries.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
固体化学
·
电池技术
✓ 已验证
DOI
高影响因子
POWDER TECHNOLOGY
·
2019
·
IF 3.413
Zhilin Xi,Shuhui Zhou,Longzhe Jin
In this work, a self-hardening foam-sol (SHF) is proposed to control the diffusion of static coal dust. The SHF was mainly synthesized by a foaming solution (composed of 1 g/L polyethylene oxide (PEO), 25 g/L sodium dodecyl sulfate (SDS), 100 g/L sodium silicate and 874 g/L water) and organic acid with a concentration range of 10 to 13 g/L. Based on fluorescence spectrophotometry , drop shape analysis, X-ray photoelectron spectroscopy and scanning electron microscopy, several conclusions could be found. The critical micelle concentration of SDS was 25 g/L, when most of the pyrene pendants were solubilized into the SDS micelles to form the hydrophobic mixed micelles, and excimer formation began to reach a maximum. The SHF had optimal wetting ability with the smallest contact angle of 17 o , due to PEO-bonded water and SDS forming hydrogen and a dual adsorption layer, which could enhance the wetting ability of the SHF on coal dust surfaces. The SHF had the best accepted loss of liquidity time (180–86 s) and self-hardening time (236–121 s) via the reaction of sodium silicate and organic acid. The pores and cracks among dust particles could be linked closely by SHF via the solid bridge force. The primary components were silica and sodium carbonate with crystal water and hydrophilic C O and C O or O–C–O functional groups. Based on the dust suppression experiment, the dust suppression efficiency was almost 100% at airflow speeds below 12 m/s. Obviously, the dust particles could be controlled via their surfaces being covered by a layer of SHF, since the SHF has strong hydrophilic properties and the solid bridge force. In addition, vehicle-mounted SHF preparation equipment was designed.
研究领域:
环境工程
·
矿业安全
·
胶体与界面化学
·
职业健康
·
颗粒物控制
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）