Journal of Materials Chemistry B
·
2022
·Vol. 10
·期 28
·5375-5387
·
IF 7.571
Xiujun Tan,Jiayi Wu,Rui Wang,Chenglin Wang,Yimin Sun,Zhenming Wang,Ling Ye
The repair of large bone defects is an urgent problem in the clinic. Note that the disruption of redox homeostasis around bone defect sites might hinder the new bone reconstruction. The rational design of hydrogels for bone regeneration still faces the challenges of insufficient antioxidant capability and weak osteogenesis performance. Here, motivated by the versatile therapeutic functions of metal–organic cages, magnesium-seamed C-propylpyrogallol[4]arene (PgC3Mg) functionalized biodegradable and porous gelatin methacrylate (GelMA) hydrogels are constructed. The novel metal–organic cages endow hydrogels with highly bioactive characteristics and strong reactive oxygen species (ROS)-scavenging ability owing to the simultaneous release of bioactive Mg2+ ions and antioxidant phenolic hydroxyl-rich moieties. The in vitro results reveal that the PgC3Mg modified biocompatible hydrogels show higher expression of osteo-related genes and significantly eliminate the intracellular ROS levels of bone marrow-derived mesenchymal stem cells (BMSCs) against oxidative damage. Meanwhile, the bioactive and ROS scavenging hydrogels can accelerate bone regeneration in large cranial defects. Overall, this study may provide new insights into the designing of regenerative bone grafts with simultaneously enhanced osteogenic and antioxidant capabilities.
研究领域:
生物材料
·
组织工程
·
再生医学
·
骨科
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Healthcare Materials
·
2022
·Vol. 12
·期 9
·2202785
·
IF 11.092
Jingzhi Xu,Kun Xi,Jincheng Tang,Juan Wang,Yunkai Tang,Liang Wu,Yichang Xu,Zonghan Xu,Liang Chen,Wenguo Cui,Yong Gu
Living biomaterials directly couple with live cells to synthesize functional molecules and respond to dynamic environments, allowing the design, construction and application of next generation composite materials. Improving the coordination and communication between artificial materials and living cells is essential. In this study, collagen self-assembly and micro-sol electrospinning techniques are used to prepare oriented living fiber bundles that can increase the transplantation rate of stem cells in the early stages of inflammation, indirectly enhancing the dynamic regulation of stem cells during inflammation. Additionally, brain-derived neurotrophic factor (BDNF) contained in the fiber can improve the differentiation of bone marrow mesenchymal stem cells (BMSCs) into neurons once the inflammatory storm subsides. The living oriented fiber bundles fully simulate the 3D structure of the central nervous system, activate integrin β 1, promote the growth and adhesion of stem cells in the acute stage of inflammation, upregulate anti-inflammatory genes by more than twofold via BMSCs in response to inflammation, and stably release BDNF for up to 4 weeks post-inflammation storm subsidence. Finally, the BDNF induces the differentiation of BMSCs to neurons by enhancing the expression of neural-related genes, which enables the recovery of neurological functions in the later stages of spinal cord injury.
研究领域:
生物医学工程
·
组织工程
·
干细胞生物学
·
神经科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Nano
·
2024
·
IF 15.8
Yang Shen,Yaowen Xu,Ziqian Yu,Guo Chen,Bin Chen,Liqiong Liao
Osteomyelitis induced by Staphylococcus aureus (S. aureus) is a persistent and deep-seated infection that affects bone tissue. The main challenges in treating osteomyelitis include antibiotic resistance, systemic toxicity, and the need for multiple recurrent surgeries. An ideal therapeutic strategy involves the development of materials that combine physical, chemical, and immunomodulatory synergistic effects. In this work, we prepared injectable microspheres consisting of an interpenetrating network of ionic-cross-linked sodium alginate (SA) and genipin (Gp)-cross-linked gelatin (Gel) incorporated with tannic acid (TA) and copper ions (Cu2+). The Gp-cross-linked Gel acted as a “naturally−derived” photothermal therapy (PTT) agent. The results showed that the microspheres exhibited efficient and rapid bactericidal effects against both S. aureus and Escherichia coli (E. coli) under the irradiation of near-infrared light at 808 nm wavelength; moreover, the release of Cu2+ also induced sustained inhibitory effects against bacteria during the nonirradiation period. The in vitro cell culture results indicated that when combined with PTT, the microspheres could adaptively modulate macrophage M1 and M2 phenotypes in sequence. Additionally, these microspheres were found to enhance the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). In vivo studies conducted in a rat femur osteomyelitis model with bone defects showed that under multiple laser irradiation the microspheres effectively controlled bacterial infection, improved the pathological immune microenvironment, and significantly enhanced the repair and regeneration of bone tissues in the affected area.
研究领域:
生物医学工程
·
材料科学
·
感染性疾病
·
再生医学
·
免疫学
·
骨科
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION
·
2019
·
IF 2.121
Huilin Ye,Junjin Zhu,Dan Deng,Shue Jin,Jidong Li,Yi Man
Membranes play pivotal role in guided bone regeneration (GBR) technique for reconstruction alveolar bone. GBR membrane that is able to stimulate both osteogenic and angiogenic differentiation of cells may be more effective in clinic practice. Herein, we fabricated the Sr-doped calcium phosphate/polycaprolactone/chitosan (Sr-CaP/PCL/CS) nanohybrid fibrous membrane by incorporating 20 wt% bioactive Sr-CaP nanoparticles into PCL/CS matrix via one-step electrospinning method, in order to endow the membrane with stimulation of osteogenesis and angiogenesis. The physicochemical properties, mechanical properties, Sr2+ release behavior, and the membrane stimulate bone mesenchymal stem cell (BMSCs) differentiation were evaluated in comparison with PCL/CS and CaP/PCL/CS membranes. The SEM images revealed that the nanocomposite membrane mimicked the extracellular matrix structure. The release curve presented a 28-day long continuous release of Sr2+ and concentration which was certified in an optimal range for positive biological effects at each timepoint. The in vitro cell culture experiments certified that the Sr-CaP/PCL/CS membrane enjoyed excellent biocompatibility and remarkably promoted rat bone mesenchymal stem cell (BMSCs) adhesion and proliferation. In terms of osteogenic differentiation, BMSCs seeded on the Sr-CaP/PCL/CS membrane showed a higher ALP activity level and a better matrix mineralization. What’s more, the synergism of the Sr2+ and CaP from the Sr-CaP/PCL/CS membrane enhanced BMSCs angiogenic differentiation, herein resulting in the largest VEGF secretion amount. Consequently, the Sr-CaP/PCL/CS nanohybrid electrospun membrane has promising applications in GBR.
研究领域:
材料科学
·
生物材料
·
组织工程
·
生物医学工程
·
再生医学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Acta Biomaterialia
·
2022
·
IF 10.633
Tingben Huang,Chenxi Tu,Tong Zhou,Zhou Yu,Yuchen Wang,Qiong Yu,Ke Yu,Zhiwei Jiang,Changyou Gao,Guoli Yang
As an alternative strategy to achieve the desired bone augmentation, tenting screw technology (TST) has considerably broadened the indications for implant treatment. Titanium tenting screws are typically used in TST to maintain the space for bone regeneration . However, a high degree of osteogenic integration complicate titanium tenting screw removal and impact the bone healing micro-environment. Previous efforts have been focused on modifying titanium surfaces to enhance osseointegration while ignoring the opposite process. Due to the vital role of bone marrow mesenchymal stem cells (BMSCs) in bone regeneration, it might be feasible to reduce osseointegration around titanium tenting screws by resisting the adhesion of BMSCs. Herein, poly(ethylene glycol)methyl ether methacrylate (poly(PEGMA)) with an optimal length of PEG chain was incorporated with a Ti surface in terms of surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP). The cell apoptosis analysis showed that the new surface would not induce the apoptosis of BMSCs. Then, the adhesive and proliferative behaviors of BMSCs on the surface were analyzed which indicated that the poly(PEGMA) surface could inhibit the proliferation of BMSCs through resisting the adhesion process. Furthermore, in vivo experiments revealed the presence of the poly(PEGMA) on the surface resulted in a lower bone formation and osseointegration compared with the Ti group. Collectively, this dense poly(PEGMA) surface of Ti may serve as a promising material for clinical applications in the future. Statement of significance The poly(ethylene glycol)methyl ether methacrylate (poly(PEGMA)) with an optimal length of PEG chain was grafted onto a Ti surface by surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP). The PEGMA surface could reduce the osteogenic integration by preventing the adhesion of cells, resulting in a lower pullout force of the modified implant and thereby desirable and feasible applications in dental surgery.
研究领域:
生物材料
·
生物医学工程
·
骨科
·
牙科手术
·
组织工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Longwei Hu,Yun Zhu,Yibo Guo,Chenping Zhang,Yang Wang,Zhen Zhang
Barrier membranes play an important role in guided bone regeneration (GBR) and have been primarily considered as physical barriers. Due to their inherent “foreign body” properties, barrier membranes introduced during GBR procedures unavoidably modify the local immune microenvironment, with consequent impacts on osteogenesis. In bone tissue engineering applications, inorganic bioceramics have been shown to possess the abilities to modulate the local immune response and promote the differentiation of stem cells along osteogenic lineages. Moreover, these bioceramics can be easily incorporated into scaffold membranes, thus demonstrating significant potential as a barrier membrane material for GBR. Herein, an inorganic bredigite (BRT, Ca 7 MgSi 4 O 16 ) bioceramic-containing scaffold was fabricated and characterized, and its effects on the immune response and osteogenesis during GBR were investigated. The results indicated that the BRT-containing scaffolds promoted the migration and osteogenic differentiation of bone marrow-derived stem cells (BMSCs). Single-cell RNA sequencing analysis indicated a unique microenvironment and subpopulation of BMSCs cultured on the BRT scaffolds, which exhibited increased osteo/chondrogenic and angiogenic differentiation potential. Furthermore, the BRT-containing scaffolds induced macrophage polarization into the pro-regenerative M2 phenotype, which subsequently promoted the migration and osteogenic differentiation of BMSCs. Additionally, in an in vivo rat model, the BRT-containing membrane was confirmed to enhance the immune microenvironment and support bone regeneration in a cranial critical-size defect. Collectively, these findings indicate that the BRT-containing scaffold membrane possesses dual immunomodulatory and osteogenic properties, offering a potentially beneficial GBR membrane for clinical application.
研究领域:
组织工程
·
生物材料
·
再生医学
·
免疫学
·
骨科
✓ 已验证
产品关联
DOI
高影响因子
Journal of the Mechanical Behavior of Biomedical Materials
·
2023
·
IF 3.9
Ting Tian,Qing Hu,Miao Shi,Cong Liu,Gang Wang,Xiaofeng Chen
Hierarchical pores are important structural components of the bone tissue and are closely related to angiogenesis, nutrient transport, and metabolism involved in the repair of a bone defect. Here, we fabricated a composite scaffold having a hierarchical structure, based on micro-nano bioactive glass (MNBG) incorporated into poly (lactic-co-glycolic acid) (PLGA), and with camphene as a pore-forming agent for bone repair. The results showed that camphene formed abundant micropores in the walls of large pores, resulting in hierarchical pore structures ranging from a few microns to a hundred microns. Moreover, there was 2–3 folds increased in compressive modulus and the scaffolds showed a stable degradation rate and a higher degree of apatite crystallization than ordinary porous scaffolds . The results of in vitro studies showed that, when compared to ordinary porous scaffolds, PLGA-MNBG scaffolds with multi-holes could better promote the proliferation of bone marrow mesenchymal stem cells (BMSCs) and the expression of angiogenic marker (CD31) of human umbilical vein endothelial cells (HUVECs).
研究领域:
生物材料
·
组织工程
·
生物医学工程
·
细胞生物学
✓ 已验证
DOI
PubMed
高影响因子
BIOMATERIALS
·
2020
·
IF 10.317
Yaojie Wei,Zhongqun Liu,Xu Zhu,Le Jiang,Weidong Shi,Yingjin Wang,Nan Xu,Fangli Gang,Xiumei Wang,Lingyun Zhao,Jun Lin,Xiaodan Sun
Peri-implant aseptic inflammation and osteolysis can cause aseptic loosening, leading to the failure of implants. Therefore, aseptic loosening of orthopedic implants remains an imminent problem for the development of durable and effective implants. In this work, a common anti-inflammatory drug (aspirin, ASA) was loaded in poly(lactic-co-glycolic acid) (PLGA) to construct nanofiber coatings on titanium (Ti) via electrospinning. The adhesion of the nanofiber coatings to Ti was ensured by polydopamine (PDA) modification. A stable and sustainable release of aspirin from the nanofiber coatings could last up to 60 days. Such electrospun PLGA@ASA nanofiber coatings could promote proliferation and osteogenic differentiation of bone mesenchymal stem cells (BMSCs) as well as inhibit M1 polarization and RANKL-induced osteoclast differentiation of macrophages in vitro . These results indicated that this facile formulation of the PLGA@ASA nanofiber coatings for long-term drug release could be expected to address the problem of aseptic loosening effectively in dual directions of both anti-inflammation and improving osseointegration simultaneously. Notably, the in vivo experiments demonstrated that PLGA@ASA nanofiber coatings did promote osseointegration ability of Ti implants significantly, even in challenging condition with wear particles, and also effectively inhibited Ti particle induced osteolysis around the implants. This work indicates a promising way for the development of durable and effective implants by using PLGA@ASA-PDA-Ti to address the problem of aseptic loosening in dual directions.
研究领域:
生物材料
·
骨科
·
组织工程
·
药剂学
✓ 已验证
DOI
PubMed
高影响因子
Biomaterials Science
·
2021
·Vol. 9
·期 7
·2631-2646
·
IF 6.843
Mengru Geng,Qianqian Zhang,Jiani Gu,Jin Yang,Haibo Du,Yating Jia,Xiaojun Zhou,Chuanglong He
Three-dimensional (3D) printed scaffolds provide a promising prospective for application in bone tissue engineering. 3D printed scaffolds with micro- and nano-fibrous structures that facilitate cell adhesion and migration, and combined vascularization and osteoinduction bioactivity will be ideal implants for bone defect repair. Here, we fabricated a 3D printed biodegradable poly (glycerol-co-sebacic acid-co-L-lactic acid-co-polyethylene glycol) (PGSLP)-based scaffold that was internally filled with gelatin nanofibers and allowed the local release of deferoxamine (DFO), which is essential for angiogenesis and osteogenesis in bone regeneration. The nanofibrous structured gelatin/PGSLP (NGP) scaffold was fabricated using a thermally induced phase separation (TIPS) technique, and the macroporous structured gelatin/PGSLP (MGP) scaffold was prepared by directly freeze-drying. The in vitro experiments demonstrated that both DFO-loaded NGP and DFO-loaded MGP scaffolds can promote the migration and tubular formation of human umbilical vein endothelial cells (HUVECs), and enhance the mineralized nodule formation and osteogenic-related gene expression during osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs). In a rat critical-sized calvarial defect model, the results suggested that the scaffolds with DFO loading significantly promote the vascular formation and accelerate bone regeneration, while the enhancement of vascularization and osteogenesis in vivo in DFO-loaded NGP scaffold was better than that in DFO-loaded MGP scaffold. Therefore, the constructed PGLSP-based scaffolds with micro- and nano-fibrous structures would be promising candidates to match the structural and functional requirements for vascularized bone regeneration.
研究领域:
组织工程
·
生物医学工程
·
生物材料
·
再生医学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
·
2024
·
IF 3.9
Wen Qin,Ling Li,Zhao Mu,Weiwei Yu,Yina Zhu,Shuailin Jia,Kun Xuan,Wen Niu,Lina Niu
The periodontal tissue comprises alveolar bone, cementum, and periodontal ligament (PDL), forming a highly hierarchical architecture. Although current therapies could regenerate the hard tissue well, the simultaneous reconstruction of hard and soft tissue remains a great clinical challenge with the major difficulty in highly orientated PDL regeneration. Using the unidirectional freeze-casting method and biomimetic mineralization technique, we construct a hierarchical bilayer scaffold with the aligned chitosan scaffold with ZIF-8 resembling PDL, and intrafibrillarly mineralized collagen resembling alveolar bone. The hierarchical bilayer scaffold exhibits different geomorphic clues and chemical microenvironments to realize a perfect simulation of the natural periodontal hierarchical architecture. The aligned scaffold with ZIF-8 could induce the fibrogenic differentiation of bone mesenchymal stromal cells (BMSCs), and the mineralized scaffold could induce osteogenic differentiation of BMSCs. The hierarchical bilayer scaffold could simulate periodontal complex tissue, exhibiting great promise for synchronized multi-tissue regeneration of periodontal tissue.
研究领域:
组织工程
·
生物材料
·
牙科科学
·
再生医学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Small
·
2024
·
IF 13
Qin Zhang,Weikai Chen,Guangfeng Li,Zhixin Ma,Mengru Zhu,Qianmin Gao,Ke Xu,Xinru Liu,Wenyi Lu,Wencai Zhang,Yan Wu,Zhongmin Shi,Jiacan Su
In view of the increased levels of reactive oxygen species (ROS) that disturb the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs), the repair of diabetic bone defects remains a great challenge. Herein, a factor-free hydrogel is reported with ROS scavenging and responsive degradation properties for enhanced diabetic bone healing. These hydrogels contain ROS-cleavable thioketal (TK) linkers and ultraviolet (UV)-responsive norbornene (NB) groups conjugated with 8-arm PEG macromers, which are formed via UV crosslinking-mediated gelation. Upon reacting with high levels of ROS in the bone defect microenvironment, ROS-cleavable TK linkers are destroyed, allowing the responsive degradation of hydrogels, which promotes the migration of BMSCs. Moreover, ROS levels are reduced through hydrogel-mediated ROS scavenging to reverse BMSC differentiation from adipogenic to osteogenic phenotype. As such, a favorable microenvironment is created after simultaneous ROS scavenging and hydrogel degradation, leading to the effective repair of bone defects in diabetic mouse models, even without the addition of growth factors. Thus, this study presents a responsive hydrogel platform that regulates ROS scavenging and stromal degradation in bone engineering.
研究领域:
生物医学工程
·
组织工程
·
材料科学
·
糖尿病研究
·
干细胞生物学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Science & Engineering C-Materials for Biological Applications
·
2018
·
IF 5.08
Sidi Liu,Yuting Zhu,Hainan Gao,Peng Ge,Keli Ren,Jingwei Gao,Yupeng Cao,Dong Han,Junhu Zhang
Polyetheretherketone (PEEK) has an elastic modulus similar to that of the bone; however, its use as a material for bone repair is limited by bio-inert surface chemistry and poor osteogenesis-inducing capacity. To address this issue, the PEEK surface was activated by ultraviolet radiation-induced grafting of methacrylated hyaluronic acid (MeHA) and titanium dioxide (TiO 2 ) nanofibers via a one-step process. The modified PEEK surface was characterized by X-ray photoelectron and Fourier-transform infrared spectroscopy, and the extent of surface modification was evaluated by measuring static contact angles. Atomic force microscopy revealed that the PEEK surface grafted with electrospun TiO 2 had abundant nanofibers and a roughness that was comparable to that of human cortical bone. In vitro experiment, rat bone mesenchymal stem cells showed increased adhesion, proliferation, and osteogenic differentiation capacity on TiO 2 -modified as compared to unmodified PEEK. Thus, PEEK that is surface-modified with electrospun TiO 2 and MeHA has enhanced biocompatibility and can be an effective material for use in orthopedic implants and medical devices.
研究领域:
材料科学
·
生物医学工程
·
骨科
·
生物材料
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）