NEW JOURNAL OF CHEMISTRY
·
2017
·Vol. 42
·期 1
·647-653
·
IF 3.269
Chol-Nam Ri,Kim Song-Gol,Jong Ju-Yong,Sung-Nam Pak,Song-Chon Ri,Jong-Hwa Ri
Herein, a Bi2WO6/Bi4V2O11 heterostructured photocatalyst was fabricated through a facile one-pot solvothermal method. In this heterojunction system, highly homogeneous-dispersed Bi4V2O11 nanocrystals were anchored onto Bi2WO6 nanoflakes, endowing the heterojunction with nanosized interfacial contact. Because of the favorable interfacial contact and band alignment, photoinduced charge carrier transfer is facilitated in the Bi2WO6/Bi4V2O11 heterojunction, which can be verified by photocurrent and photoluminescence measurements. In contrast with pristine Bi2WO6 and Bi4V2O11 samples, the Bi2WO6/Bi4V2O11 heterostructured photocatalyst displays drastically improved photocatalytic Cr(VI) reduction activity under visible-light irradiation. More significantly, the as-fabricated heterojunction possesses superior activity for Cr(VI) relative to the counterpart obtained by mechanical mixing, indicating that the interfacial contact plays a determinant role in promoting charge carrier transfer. Moreover, Bi2WO6/Bi4V2O11 heterojunctions exhibited good cycling stability even after 5 cycles. A plausible photocatalytic Cr(VI) reduction reaction mechanism over the Bi2WO6/Bi4V2O11 heterojunction is proposed on the basis of band alignment. This work reports a high-efficiency photocatalyst for Cr(VI) and might shed light on the decisive factor for optimizing the heterostructure.
研究领域:
材料科学
·
环境科学
·
化学
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2019
·
IF 5.107
Ruixiang Yang,Shan Zhong,Lishan Zhang,Baojiang Liu
In the drive toward green and sustainable chemistry in wastewater treatment, it is necessary to explore more efficient and stable photocatalysts to achieve the degradation of antibiotic and reduction of heavy metal ions. To this end, an organic-inorganic hybrid PW 12 /CN@Bi 2 WO 6 composite photocatalyst was prepared: PW 12 /CN composite was prepared by heating H 3 PW 12 O 40 , melamine and phytic acid; PW 12 /CN@Bi 2 WO 6 was synthesized via PW 12 /CN and Bi 2 WO 6 by hydrothermal method. The photocatalytic activity of as-prepared photocatalyst was evaluated by degrading tetracycline hydrochloride (TC) and reducing hexavalent chromium (Cr(VI)) under the simulated xenon light source. The results show the PW 12 /CN@Bi 2 WO 6 composite always maintains high catalytic performance for TC and Cr 6+ and has well cycle stability. After irradiation for 90 and 100 min, the most effective 10%-PW 12 /CN@Bi 2 WO 6 achieved a removal rate of 98.7% for Cr(VI) and 97.5% for TC. Photoluminescence spectroscopy and photoelectrochemical results demonstrate that the charge separation is enhanced for the PW 12 /CN@Bi 2 WO 6 , attributed to the introduction of the organic-inorganic systems to enhance the absorbance of light energy, promote charge transfer and inhibit e − and h + pair recombination. In addition, the free radical scavenging test and electron spin resonance analysis (ESR) test indicate that the main species of action are h + and O 2 − in the photocatalytic oxidation reaction. Further, the mechanism of photocatalysis was proposed by Mott-Schottky. The strategy improving catalytic performance through organic-inorganic hybrid systems provides a new route for the development of photocatalysts.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
Nanomaterials
·
2022
·Vol. 12
·期 16
·2834
·
IF 5.719
Yun He,Hongjie Gao,Jiankang Liu
Diclofenac is a non-steroidal, anti-inflammatory drug and is clinically used for the treatment of osteoarthritis, non-articular rheumatism, etc. This research aimed to demonstrate the creation of an upgraded photoelectrochemical (PEC) aptamer sensor for detecting diclofenac (DCF) with high sensitivity. In this work, photoactive materials and bio-identification components served as visible-light-active CuS/MoS2/Bi2WO6heterostructures and aptamers, respectively. CuS and MoS2/Bi2WO6were combined to improve photocurrent responsiveness, which helped the structure of PEC aptasensors. Additionally, the one-pot synthesis of CuS/MoS2/Bi2WO6was ecologically beneficial. With these optimizations, the photocurrent response of aptamer/CS/CuS/MoS2/Bi2WO6exhibited linearity between 0.1 and 500 nM DCF. The detection limit was 0.03 nM (S/N = 3). These results suggest that the PEC sensing technique might produce an ultra-sensitive sensor with high selectivity and stability for DCF detection.Keywords:photoelectrochemical;CuS/MoS2/Bi2WO6;diclofenac (DFC);heterostructure;aptasensors
研究领域:
生物传感技术
·
环境监测
·
药物检测
✓ 已验证
DOI
PubMed
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2019
·Vol. 43
·期 47
·18860-18867
·
IF 3.069
Xu Tang,Yang Yu,Changchang Ma,Guosheng Zhou,Xinlin Liu,Minshan Song,Ziyang Lu,Lei Liu
A novel biomass carbon quantum dots@Bi2WO6 (BC-QDs@Bi2WO6) photocatalyst with uniform dispersivity was prepared via a dialysis-assisted hydrothermal process. Multiple techniques including HR-TEM, XPS, UV-Vis, PL, photocurrent analysis, and electrochemical impedance spectroscopy were employed to investigate the morphology and structures as well as the optical and electronic properties of the as-prepared samples. The photocatalytic activity of BC-QDs@Bi2WO6 was assessed by the degradation of antibiotics (tetracycline, ciprofloxacin, and gatifloxacin). The improved photocatalytic activity was attributed to the quantum effect of BC-QDs, which acted as the light harvesting center, electron reservoir, and reaction center for degrading the pollutants. Furthermore, a plausible mechanism for photocatalysis was put forward according to the ESR and quenching experiments. The present work can have significant advantages in the construction of biomass carbon-based photocatalysts in pollutant degradation and improved light utilization.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2023
·Vol. 13
·期 6
·3612-3622
·
IF 3.9
Yiyao Zhang,Hongchen Song,Jintai Han,Yunchao Liu,Jing Sun,Tingting Shen,Xikui Wang,Zhen Wang,Weizhen Zhang,Xuerui Yao
A Bi2WO6/BiVO4 composite photocatalytic material was synthesized by the hydrothermal method, and achieved the effective degradation of oxytetracycline (OTC) and tetracycline (TC) under visible light. The compositions, structures, chemical states and optoelectronic properties of Bi2WO6, BiVO4 and Bi2WO6/BiVO4 composites were characterized by systematic characterization. The results show that the existence of the heterojunction interface facilitates the separation of photogenerated carriers. Compared with the pure catalyst of Bi2WO6 and BiVO4, the Bi2WO6/BiVO4 composite material significantly improves the degradation efficiency of OTC and TC. The degradation rate is 6.22 and 3.02 times higher than that of Bi2WO6 and BiVO4, respectively. Through the free radical quenching experiments, it is known that photogenerated holes (h+) and superoxide anion free radicals (·O2−) are the main active substances in the degradation of OTC. By analyzing the process of photocatalytic degradation of OTC, there are mainly six intermediates during the process. Their possible degradation pathways are also inferred in this paper.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2024
·
IF 8.1
Tingzhe Shen,Danni Zeng,Ze Liu,Yadong Hu,Yaxi Tian,Jun Song,Tao Yang,Rongfeng Guan,Changjian Zhou
Improving the efficiency of photogenerated carrier separation by designing heterojunction photocatalysts remains an important challenge. In this study, TiO 2 nanofibers were prepared by electrospinning, Bi/Bi 2 WO 6 /TiO 2 heterojunctions were constructed by hydrothermal method, and verified by characterization techniques. The heterojunction had good photodegradation activity to sulfamethoxazole (SMX) under ultraviolet and visible light irradiation (96.4 % within 60 min). The enhanced photodegradation activity of Bi/Bi 2 WO 6 /TiO 2 nanocomposites can be attributed to the synergistic effect of S-Scheme mechanism and Bi metal plasma action. In addition, Bi metals can generate a large number of electron-hole pairs under the action of surface plasmon resonance (SPR). In addition, the influence factors such as pH, SMX concentration and catalyst loading were studied. According to the detected intermediates, the photocatalytic degradation pathway of SMX was studied. The results of free radical capture experiment and ESR show that ·O 2 – and h + free radicals play an important role in the decomposition of SMX. The cyclic experiments show that Bi/Bi 2 WO 6 /TiO 2 nanocomposites have excellent stability and reuse characteristics. Finally, the mechanism of photocatalytic degradation of SMX was described. This study provides a promising perspective for the preparation and development of S-Scheme heterojunction photocatalysts based on Bi 2 WO 6 .
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2021
·Vol. 32
·期 10
·13305-13322
·
IF 2.478
Gu Yufen,Guo Bobo
Here, the novel Ag 2 MoO 4 /Bi 2 WO 6 (AMO/BWO) heterojunction composite photocatalysts were synthesized based on the combination (co-precipitation method + hydrothermal method) XRD, XPS, SEM, TEM, UV–Vis DR spectroscopy, PL spectroscopy, FTIR spectroscopy, as well as EIS analyses were employed to characterize the photocatalysts, and photocurrent response was utilized to confirme the formation of Z-type heterojunction. The generation and transfer of electron/holes in the AMO/BWO heterojunctions excited by simulated sunlight were analyzed. Under simulated sunlight, the photocatalytic performance of AMO/BWO composites were studied by degradation of organic pollutants. The experimental results show that the 30 wt% AMO@BWO is the best photocatalytic composite material among all samples and the degradation rate reached 98.6%. Due to the prolonging of lifetime of the photoexcited electrons in the CB of AMO and holes in the VB of BWO, these carriers are more effective to participate in photodegradation reactions. An electron/hole transfer mechanism of the Z-scheme heterojunctions is proposed to illustrate the enhanced photodegradation performance of the AMO/BWO composite samples.
研究领域:
材料科学
·
环境科学
·
光催化技术
✓ 已验证
产品关联
DOI
高影响因子
Materials
·
2019
·Vol. 12
·期 10
·1713
·
IF 2.972
Dongxiang Luo,Qizan Chen,Ying Qiu,Baiquan Liu,Menglong Zhang
This work focuses on the crystal size dependence of photoactive materials and light absorption enhancement of the addition of carbon dots (CDs). mac-FTO (macroporous fluorine-doped tin oxide) films with an inverse opal structure are exploited to supply enhanced load sites and to induce morphology control for the embedded photoactive materials. The Bi2WO6@mac-FTO photoelectrode is prepared directly inside a mac-FTO film using a simple in situ synthesis method, and the application of CDs to the Bi2WO6@mac-FTO is achieved through an impregnation assembly for the manipulation of light absorption. The surface morphology, chemical composition, light absorption characteristics and photocurrent density of the photoelectrode are analyzed in detail by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), UV–vis diffuse reflectance spectra (DRS), Energy dispersive X-ray analysis (EDX) and linear sweep voltammetry (LSV).Keywords:photoelectrode;carbon dots;macroporous electrode
研究领域:
材料科学
·
能源转换技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
DALTON TRANSACTIONS
·
2022
·Vol. 52
·期 2
·476-486
·
IF 4.569
Junlei Wang,Kuan Wang,Zhen-Hong He,Tong Sun,Run-Jing You,Jian-Gang Chen,Weitao Wang,Yang Yang,Zhao-Tie Liu
Oxygen-containing organics, which are generated from the selective oxidation of their corresponding hydrocarbons, have high value in the chemical and pharmaceutical industries. However, their oxidation reactions are very challenging as the products are more active than the substrates, especially for the oxidation of cyclohexane (CHA). Herein, we focused on the one-step preparation of Bi2WO6 with double active sites of tunable metallic Bi and oxygen vacancies (OV–Bi/Bi2WO6) by a facile solvothermal treatment. Then, OV–Bi/Bi2WO6 was used as an efficient photocatalyst for the partial oxidation of CHA to cyclohexanone (CHA-one) for the first time in air as an oxidant under solvent-free and room temperature conditions. The Bi : Bi2WO6 ratio in the as-prepared OV–Bi/Bi2WO6 heterojunction could be tailored from 0.08 to 8.43 by controlling the solvothermal temperature, and the synergistic effect between DMF and EG could increase the reduction of MDF/EG and promote the production of Bi. Moreover, OV–Bi/Bi2WO6-160 yielded 4.4 and 8.8 times more CHA-one (128.8 μmol) than pure Bi2WO6 and metallic Bi, respectively, and achieved 93.6% selectivity to CHA-one in air as an oxidant under solvent-free conditions. The results revealed that the highly enhanced photocatalytic activity was mainly attributed to the superior specific surface area, outstanding photo-absorption, abundant oxygen vacancies, and efficient electron–hole separation. Moreover, for the unique double active sites in OV–Bi/Bi2WO6, oxygen vacancies can enhance the adsorption and activation capacity of Bi2WO6 for O2, while metallic Bi can improve the adsorption and activation capacity of Bi2WO6 for CHA. Meanwhile, OV–Bi/Bi2WO6 also exhibited excellent durability due to the strong interaction between metallic Bi and Bi2WO6. The present work provides a flexible approach for tailoring the Bi : Bi2WO6 ratio and outlines an effective method for producing CHA-one from CHA under mild conditions.
研究领域:
材料科学
·
催化化学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2025
·
IF 5.4
Zhixian Du,Yuan Gao,Zhuanzhuan Liang,Yanqing Yang,Weike Zhang
In this work, the Bi 2 WO 6 /KCC-1 photocatalytic composite was prepared by hydrothermal method using Bi 2 WO 6 as photocatalyst and KCC-1 as cocatalyst, for degradation of Rhodamine B (RhB). The result shows that when the mass percentage of KCC-1 in the composite is 7 % (BK-3), the photocatalytic degradation efficiency is the highest, reaching 90.63 %. Furthermore, the BK-3 composite shows a well degradation activity (83.90 %) even after four consecutive cycles of photocatalysis. Characterization of the photocatalyst by various testing techniques show that the BK-3 composite presents high visible light response, narrow energy band, and strong separation of photogenerated carriers. The results of free radical capture experiments indicate that the main active substance in the degradation of RhB under visible light is h + and ·O 2 − also plays a certain auxiliary role. This study offers promising prospects for the preparation of highly efficient photocatalysts through the modification of bismuth-based materials.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2020
·
IF 8.758
Jichong Wang,Jin Wang,Nuoya Li,Xinyi Du,Jun Ma,Chaohua He,Zhengquan Li
Photocatalytic CO2 reduction is an appealing approach to convert solar energy into high value-added chemicals. All-inorganic CsPbBr3 quantum dots (QDs) have emerged as a promising photocatalyst for reducing CO2. However, pristine CsPbBr3 has a low catalytic performance, mainly due to severe charge recombination. Herein, a 0D/2D heterojunction of CsPbBr3 QDs/Bi2WO6 nanosheet (CPB/BWO) photocatalysts is fabricated for photocatalytic CO2 reduction. The CPB/BWO photocatalyst achieves excellent photocatalytic performance: the total yield of CH4/CO is 503 μmol g–1, nearly 9.5 times higher than the pristine CsPbBr3. The CPB/BWO heterojunction also exhibits much-improved stability during photocatalytic reactions. On the basis of various characterization techniques, our investigations verified a direct Z-scheme charge migration mechanism between CsPbBr3 QDs and Bi2WO6 nanosheets. The improved photocatalytic performance is originated from the high spatial separation of photoexcited charge carriers in CPB/BWO, which can also preserve strong individual redox abilities of two components. This work reports an efficient direct Z-scheme heterojunction photocatalytic system based on metal halide perovskites. The novel strategy we proposed may bring up new opportunities for the development of metal halide perovskite photocatalysts with greatly enhanced activities.
研究领域:
材料科学
·
环境科学
·
化学
✓ 已验证
DOI
高影响因子
CHEMICAL PHYSICS
·
2021
·
IF 2.348
Wenna Hu,Fan Wu,Wei Liu
In this paper, nitrobenzene was found to be efficiently degraded by the as-prepared Z-scheme Bi 2 O 3 /Bi 2 WO 6 photocatalyst under visible light . The Bi 2 WO 6 and the composites were fabricated individually by solid phase synthesis and water-assisted grinding method. The crystal structure, morphologies, interface, optical property and Brunauer-Emmett-Teller (BET) surface area of samples were examined by different characterization techniques. The tests on photodegradation of nitrobenzene stated clearly the as-prepared composite exhibited evidently enhanced photocatalytic performace compared with uniphase material. Additionally, the optimal Bi 2 O 3 content in the coupled photocatalysts was 2%. The supreme rate constant of nitrobenzene degradation was almost 3.1 and 2.7 times that of single Bi 2 O 3 and Bi 2 WO 6 , respectively. The obviously increased photocatalytic performance of the composite was due to the highly effective separation of photoexcited electron-hole pairs over the Z-scheme structure formed between Bi 2 O 3 and Bi 2 WO 6 . The investigation provides great potential applications in treatment of the toxic and refractory wastewater.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）