文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

346,364+ SCI 论文 与阿拉丁产品引用相关
2,295,288.15 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

热门产品

视图 列表 网格

显示第97至108个,产品总数120个

设置提升方向
Cu(I)
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY · 2022 · IF 4.831

A high-performance fluorescent probe for detection of cysteine in plasma constructed by combining Cu(I) and 2,5-dimercapto-1,3,4-thiadiazole

Xiaozong Dou,Zhenhong Jia,Hongyan Zhang,Chu Chen,Ling Zhang,Jianping Man,Weiyuan Gu

A high-performance fluorescent probe 2,5-dimercapto-1,3,4-thiadiazole copper nanoparticles (DMTD-CuNPs) was synthesized by hydrothermal method based on monovalent copper (Cu(I)) and 2,5-dimercapto-1,3,4-thiadiazole (DMTD), and it can effectively detect cysteine (Cys) in plasma. Experiments show that DMTD can reduces band gap of Cu(I) in DMTD-CuNPs, promote charge transfer transition from DMTD to Cu(I) and significantly enhance fluorescence intensity of DMTD-CuNPs at 515 nm. The large Stokes shift of DMTD-CuNPs is 315 nm, which can reduce the self-quenching of probe fluorescence and improves detection accuracy of the probe. In the presence of Cys, fluorescence of DMTD-CuNPs at 515 nm is significantly quenched because Cys reacts with Cu(I) in DMTD-CuNPs through Cu-S bond to form reduced charge transfer, which can be successfully used for the detection of Cys. Linear range and detection limit for Cys detection are 25–65 µM and 50 nM, respectively. Furthermore, feasibility of detecting Cys in plasma using DMTD-CuNPs probe was evaluated by standard addition method, and the absolute recovery is 96–99%. Such a DMTD-CuNPs probe shows high sensitivity, good selectivity and low detection limit for Cys, which is expected to be used for the practical analysis of Cys in plasma.

研究领域: 分析化学 · 生物化学 · 材料科学
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INORGANICA CHIMICA ACTA · 2022 · IF 3.118

Use chloride to assist in constructing of penta- and nano-nucleus mixed-valent Cu(I/II) clusters and their photo-thermal properties

Jing-Wen Zhang,Ling-Xiao Wang,Xun Cheng,Lin-Lin Hou,Jing-Zhe Li,Chun-Feng Wang,Xiao-Wei Yan,Kuan-Guan Liu

To prepare new series of mixed-valence polynuclear Cu(I/II) clusters, chloride ions are introduced to construct two mixed-valence polynuclear Cu(I/II) clusters for evaluating their photothermal conversion performance. X-ray single-crystal structural analysis reveals their molecular formula are {Cu II [Cu I (Cy 3 P)] 4 (BTA) 4 Cl 2 }·5DMF (I·5DMF, Cy 3 P = triscyclohexylphosphine, BTA = benzotriazole, DMF = N, N -Dimethylformamide) and {(Cu II ) 3 [Cu I (PPh 2 Py)] 6 (BTA) 8 Cl 4 }·6DMF (II· 6 DMF, Ph 2 PyP = diphenyl-2-pyridylphosphine), respectively. X-ray Photoelectron Spectroscopy (XPS) and Electrospray Ionization Mass Spectrometry (ESI-MS) confirm their chemical composition and charge state. The reported two mixed-valence Cu I /Cu II clusters have different nucleus (penta-nucleus for I and nano-nucleus for II) and different proportion of valence state (1/4 for I vs 1/2 for II). The thermogravimetric analysis (TGA) reveals the thermal stability of both clusters is less than our previously reported penta-nucleus mixed-valence Cu I /Cu II clusters. Contrastively studies of their optical absorption properties by the solid-state ultraviolet diffuse reflection spectra indicate high-nucleus mixed-valence Cu I /Cu II cluster with higher proportion of Cu II is superior to those penta-nucleus mixed-valent Cu(I/II) clusters. With the introduction of chloride ions to the structures of mixed-valence Cu I /Cu II clusters have not remarkably changed their photothermal conversion performance. This study provides a practicable way to construct new mixed-valence Cu I /Cu II clusters with different photothermal conversion performance.

研究领域: 化学 · 材料科学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
DALTON TRANSACTIONS · 2020 ·Vol. 50 ·期 1 ·197-207 · IF 4.174

Encapsulated anion-dominated photocatalytic and adsorption performances for organic dye degradation and oxoanion pollutant capture over cationic Cu(I)-organic framework semiconductors

Yan Zhao,Lei Li,Bo Ding,Xiu-Guang Wang,Zheng-Yu Liu,En-Cui Yang,Xiao-Jun Zhao

Decontamination of industrial wastewater containing toxic organic dye molecules and oxoanions is urgently desirable for environmental sustainability and human health. Water-stable porous metal–organic frameworks (MOFs) have emerged as highly efficient photocatalysts and/or adsorbents for water purification through controllable integration of the constitutive requirements. To reveal the inclusion anion effect of microporous MOFs on wastewater treatment, two isostructural MOFs incorporating positive charge and semiconductive characteristics, {[Cu(tpt)]·3H2O·0.5SO4}n (1) and {[Cu(tpt)]·2H2O·ClO4}n (2, tpt = 2,4,6-tris(4-pyridyl)-1,3,5-triazine), have been synthesized and employed as dual-functional materials for both dye photodegradation and oxoanion removal. The two MOFs possess the same 3-fold interpenetrating cationic backbones but are encapsulated by highly disordered sulfate or perchlorate in the open channels. These included anions have significantly tuned the hydrophilicity of the channels, extended the visible-light absorption, optimized the bandgap and decreased the conduction band potential. Under the low-energy irradiation of a 30 W LED lamp, MOF 1 has selectively and efficiently degraded rhodamine B compared to 2 with accelerated kinetics, resulting from the stronger reduction ability and less migration resistance of the photogenerated electrons. Instead, MOF 2 can quickly capture harmful MnO4− and Cr2O72− by exchanging with the entrapped ClO4−, with maximum adsorption amounts of 557 and 168 mg g−1, respectively, under ambient conditions. The improved decolorization of the aqueous solution over 2 benefits essentially from the shape and charge memory effect and the smaller hydration energy of ClO4− than SO42−. These interesting observations highlight the importance of the included anions inside the porous MOF semiconductors on wastewater treatment.

研究领域: 环境科学 · 材料科学 · 化学工程
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2025 · IF 9.7

Nanosized hollow Cu(I)/Cu(II)-metal-organic frameworks for highly efficient catalysis in azide-alkyne cycloaddition and nucleic acid-templated ligation

Chenglong Bao,Fengyu Wu,Fan Wang,Longyu Qiu,Menggang Li,Depeng Zhao,Yongsheng Yu,Weiwei Yang

The development of efficient heterogeneous catalysts for copper-catalyzed azide-alkyne cycloaddition (CuAAC) is crucial for overcoming the limitations of homogeneous systems, such as poor recyclability and catalyst leaching. In this study, we report the synthesis of nanosized hollow Cu(I)/Cu(II)-metal-organic frameworks (Nano-hollow Cu(I)/Cu(II)-MOF). The paddlewheel Cu(II) sites persist as robust structural nodes, while partial reduction engenders catalytically active planar tetranuclear Cu(I) sites strategically embedded within the framework. This unique architecture endowed Nano-hollow Cu(I)/Cu(II)-MOF with remarkable catalytic activity, achieving a turnover frequency (TOF) of 456.9 h −1 over 10 min for the CuAAC reaction between phenylacetylene and benzyl azide with a TOF 1.66-fold higher than the nanosphere control, underscoring the hollow structure's advantages. Moreover, the catalyst also demonstrated exceptional recyclability, maintaining a nearly constant catalytic conversion rate over 6 cycles. Theoretical calculations unveiled a dual‑copper synergistic mechanism, wherein coordinated charge redistribution mediated by both copper sites significantly lowered the activation barrier. The alkyne dehydrogenation is identified as the rate-determining step with a theoretical overpotential of 0.82 eV, which was pivotal for enhancing reaction efficiency. Beyond conventional catalysis, the Nano-hollow Cu(I)/Cu(II)-MOF exhibited versatile applicability, including rapid fluorescent molecule synthesis with a rate constant (k Flu ) of 0.1 min −1 and efficient DNA-templated ligation reactions with an apparent rate constant (k obs ) of 0.21 s −1 .

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2026 · IF 9.5

Manipulating d-Band Center of Cu(I)-MOFs for Catalytic Ignition of [BMIM]N(CN) 2 IL-H 2 O 2 Propellants

Qing Cheng,Yuqi Zhang,Yingying Cao,Long Liu,Yanqiang Zhang

The novel ionic liquid-H2O2 propellants are urgently to solve the intrinsic ignition problem for achieving the aerospace applications. We addressed this issue by tuning the d-band center to adjust the catalyst's adsorption strength for IL/H2O2 toward the optimal value, thus enhancing catalytic activities for the efficient decomposition of H2O2 to generate reactive oxygen species. Herein, the regulation of the d-band center of Cu(I) in Cu(I)-MOF catalyst by precise ligand engineering design was studied. Remarkably, The Cu-S3 coordination of Cu-SH' shifts its d-band center closer to the Fermi level, promoting the adsorption of [BMIM]N(CN)2 and H2O2. Cu-SH' enables efficient H2O2 activation and robust •OH and 1 O2 generation to trigger the rapid self-ignition of [BMIM]N(CN)2-H2O2 propellant. The resulted tid as low as 18.4 ms is nearly 34% lower than that of homogeneous catalyst [FcCH2N(CH3)3]2[Cu2I4]. This work provides fundamental insights into the design of efficient ligand-based combustion catalysts for the higher performance of rockets and spacecrafts.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2020 · IF 5.774

Enhancing the degradation of bisphenol A by dioxygen activation using bimetallic Cu/Fe@zeolite: Critical role of Cu(I) and superoxide radical

Longqian Xu,Linghui Zhao,Yunfeng Mao,Zhen Zhou,Deli Wu

Copper-iron bimetallic material shows a high reactive activity in dioxygen activation processes (DOAs) but presents a significant challenge for enhancing superoxide radical ( • O 2 − ) generation. In this study, a practical strategy was developed to enhance • O 2 − generation for BPA degradation using a zeolite-supported Cu-Fe bimetallic system (called Cu/Fe@zeolite), which was simply prepared by impregnation method. The results verified that the Cu(I) regeneration at the zeolite surface contributes • O 2 − generation and the H 2 O 2 that is further generated induces • OH production via a further Fenton reaction. In the reaction process, the initial generation of • O 2 − was primarily enhanced by the Cu(I) loaded onto the zeolite surface and the adsorbed BPA was easily degraded by the •OH. Under optimal operating conditions (i.e., Cu/Fe@zeolite = 3 g/L, Cu:Fe = 1:2, pH = 5, t = 120 min), it was found that 87% of BPA can be removed from wastewater. It is also important to note that the weak alkali buffering property of zeolite not only provides BPA adsorption sites under acidic conditions but also accelerates the precipitation efficiency for metallic ions and reduced the adverse effect of metallic residue on the effluent quality.

研究领域: 环境科学 · 材料科学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INORGANIC CHEMISTRY · 2022 · IF 5.436

Valence-Oriented Electrosynthesis Strategies of Cu-Based 5-Nitrotetrazolate for Environmentally Acceptable Primary Explosives

Chunpei Yu,Bonan Gu,Jiaxin Wang,Junhong Chen,Wenchao Zhang,Wei Shi,Gexing Yang,Xiaoting Lei,Junwu Zhu

The development of green primary explosives has become a “holy grail” of energetic materials research. Cu-based 5-nitrotetrazolate is considered one of the most promising candidates due to its excellent blasting power and environmentally benign nature. However, synthesizing Cu-based 5-nitrotetrazolate controllably and securely remains highly challenging. Herein, room-temperature anodization of metallic Cu and a Cu(I)–imidazole nanowire array on copper substrates in a sodium 5-nitrotetrazolate electrolyte leads to in situ electrosynthesis of Cu(I) 5-nitrotetrazolate (DBX-1, CuNT) and its analogue, Cu(II) 5-nitrotetrazolate [Cu(NT)2], respectively. Both obtained CuNT and Cu(NT)2 films demonstrate remarkable energy output and good laser-induced ignition performance. The thermal stability (Tp = 291 °C) and electrostatic safety (E50 = 2.54 mJ) of CuNT proved to be superior to those of Cu(NT)2 (Tp = 257 °C, and E50 = 0.57 mJ). Remarkably, this study provides an exciting new method for the rational design and development of Cu-based 5-nitrotetrazolate as a primary explosive for advanced initiating applications.

研究领域: 含能材料 · 炸药化学 · 电化学 · 材料科学
✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
FOOD CHEMISTRY · 2026 · IF 10.4

Fluorometric and colorimetric dual-mode detection of tert-butylhydroquinone in food samples using Mn3O4/AuNPs composite nanozyme and cu,I-doped carbon dots

Mingzhu Liu,Xueyan He,Bo Peng,Jin Wu,Zunquan Zhao,Jialei Bai,Jingran Sun,Yanjun Fang

Highly mimetic enzymatic Mn₃O₄/gold nanoparticle (AuNP) composites were prepared, which catalyze the oxidation of tert-butylhydroquinone (TBHQ) to red 2-tert-butyl-1,4-benzoquinone (TBBQ) for TBHQ detection. Absorbance at 487 nm (A₄₈₇) correlates linearly with TBHQ concentrations in the range of 0.52–50 μg/mL, with a limit of detection (LOD) of 0.063 μg/mL, and a limit of quantification (LOQ) of 0.21 μg/mL. TBBQ quenches the fluorescence of copper/iodine-doped carbon dots (Cu,I-CDs) at 500 nm via the inner filter effect (IFE), forming an “on-off” fluorescence probe for TBHQ. TBHQ concentration correlates linearly with the fluorescence intensity difference (F₀ − F) in the range of 0.31–54 μg/mL, with an LOD of 0.054 μg/mL and an LOQ of 0.18 μg/mL. This study uses a dual-mode detection approach to determine TBHQ in various food samples, with recovery rates ranging from 82.5% to 103.0%. The method is sensitive, accurate, cost-effective, and suitable for the rapidly analyzing of TBHQ in food.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of CO2 Utilization · 2018 · IF 5.503

Thermodynamically favorable protocol for the synthesis of 2-oxazolidinones via Cu(I)-catalyzed three-component reaction of propargylic alcohols, CO2 and 2-aminoethanols

Xue-Dong Li,Yu Cao,Ran Ma,Liang-Nian He

Efficient CuI/1,10-phen-catalyzed three-component cascade reaction of propargylic alcohols, CO 2 , and 2-aminoethanols has been firstly developed for the thermodynamically favourable preparation of 2-oxazolidinones. In the presence of commercially available CuI, 1,10-phen (1,10-phenanthroline) and t -BuOK, the cascade reaction afforded the desired products in good to excellent yields with a broad substrate scope (14 examples). The predicted copper complex Cu 2 I 2 (phen) 2 in situ formed from CuI and 1,10-phen could activate the triple bond through coordination. The isolation of α-alkylidene cyclic carbonate as the reaction intermediate suggests that the carboxylative cyclization of propargylic alcohol with CO 2 , followed by ring-opening reaction, is involved in the one-pot three-component cascade reaction.

研究领域: 有机化学 · 催化 · 二氧化碳利用 · 合成方法学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF HAZARDOUS MATERIALS · 2025 · IF 11.3

Ultra-low Cu(I) loading achieving ultra-high fouling-resistance and decontamination performance in a self-cleaning Cu2O/Ti3C2Tx@PVDF catalytic membrane integrated system

Chao Xie,Pengyu Zhang,Yi Hu,Dandan Yang,Yahui Li,Yulian Li,Jiandong Lu,Zijian Wu,Junyong He,Peidong Hong,Lingtao Kong

Engineering a catalytic and hydrophilic membrane integrated system holds significant environmental implications for fouling-resistant and efficient water purification. The heterojunction Cu 2 O/Ti 3 C 2 T x was successfully synthesized by leveraging the specific interactions between the terminal active groups of MXene and Cu 2 O, effectively addressing the limitations of the catalytic membrane’s performance due to low-dose doping, and enhancing its catalytic activity and hydrophilicity. Here we report a ultra-low Cu(I) loading that achieves ultra-high fouling-resistance and decontamination performance in a self-cleaning Cu 2 O/Ti 3 C 2 T x @PVDF catalytic membrane integrated system. The representative membrane incorporating 1.0 wt% of Cu 2 O/Ti 3 C 2 T x (denoted as M-1.0) as a PMS activator demonstrated the successful performance of long-lasting antifouling and sustainable decontamination across a wide pH range in complex water matrices. The intrinsic Cu(I)/Cu(II) redox cycles was found to be crucial for driving PMS activation and oxidative conversion. Moreover, the Cu 2 O/Ti 3 C 2 T x -functionalized membrane demonstrated enhanced hydrophilicity and fouling-resistance compared to the pristine PVDF membrane. We further investigate the transformation and ecotoxicity of tetrabromobisphenol A and its intermediates within the M-1.0/PMS membrane system, providing valuable insights into the evolutionary dynamics of TBBPA. This work offers innovative perspectives for advancing environmental purification, membrane self-cleaning, and resources utilization technologies.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
BIOCHEMICAL AND BIOPHYSICAL RESEARCH COMMUNICATIONS · 2024 · IF 2.5

Guluronic acid disaccharide inhibits reactive oxygen species production and amyloid-β oligomer formation

Hangyu Shen,Wenhui Liu,Yun Dou,Yongxin Lu,Chunling Zhang,Xiaoying Wang,Fangong Kong,Shoujuan Wang

In general, Cu(II) is the critical factor in catalyzing reactive oxygen species (ROS) production and accelerating amyloid-β (Aβ) oligomer formation in Alzheimer's disease (AD). Natural chelating agents with good biocompatibility and appropriate binding affinity with Cu(II) have emerged as potential candidates for AD therapy. Herein, we tested the capability of guluronic acid disaccharide (Di–GA), a natural chelating agent with the moderate association affinity to Cu(II), in inhibiting ROS production and Aβ oligomer formation. The results showed that Di−GA was capable of chelating with Cu(II) and reducing ROS production, even in solutions containing Fe(II), Zn(II), and Aβ. In addition, Di−GA can also capture Cu(II) from Cu−Aβ complexes and decrease Aβ oligomer formation. The cellular results confirmed that Di−GA prevented SH−SY5Y cells from ROS and Aβ oligomer damage by reducing the injury of ROS and Aβ oligomers on cell membrane and decreasing their intracellular damage on mitochondria. Notably, the slightly higher efficiency of Di–GA in chelating with Cu(I) than Cu(II) can be benefit for its in vivo applications, as Cu(I) is not only the most active but also the special intermediate specie during ROS production process. All of these results proved that Di–GA could be a promising marine drug candidate in reducing copper-related ROS damage and Aβ oligomer toxicity associated with AD.

CAS / MDL: 10125-13-0 920-66-1
研究领域: 神经科学 · 药理学 · 生物化学
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF HAZARDOUS MATERIALS · 2020 · IF 9.038

Surface dual redox cycles of Mn(III)/Mn(IV) and Cu(I)/Cu(II) for heterogeneous peroxymonosulfate activation to degrade diclofenac: Performance, mechanism and toxicity assessment

Junlei Zhang,Wei Zhao,Shanshan Wu,Renli Yin,Mingshan Zhu

Advanced oxidation processes (AOPs) based on heterogeneous catalytic activated peroxymonosulfate (PMS) have been becoming alternatives to conventional wastewater treatment technologies to directly degrade chemical contaminants. To build dual/multi redox cycles of different metal ions may be an effective means for better PMS activation. Herein, this study designed Mn 3 O 4 /CuBi 2 O 4 with dual redox cycles of Mn(III)/Mn(IV) and Cu(I)/Cu(II) to activate PMS for efficiently decomposing and mineralizing diclofenac sodium (DCF). Under optimal reaction conditions, DCF (50 mg/L) was degraded totally within 10 min, and TOC removal rate reached up to 74.3%. The possible mechanism of PMS activation by Mn 3 O 4 /CuBi 2 O 4 was proposed, wherein dual redox cycles of Mn(III)/Mn(IV) and Cu(I)/Cu(II) on Mn 3 O 4 /CuBi 2 O 4 effectively facilitated PMS activation to generate · O 2 − , 1 O 2 , SO 4 · − and · OH, which was responsible for DCF degradation. Moreover, combined with degraded products detected by high resolution liquid chromatography coupled to mass spectrometry and corresponding toxic assessment results, the possible degradation pathways of DCF were proposed and the relative toxicity of degraded products was evaluated. This work may be useful for developing stronger heterogeneous activators of PMS to construct more efficient AOPs for purifying wastewater.

研究领域: 环境科学 · 化学工程
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。