SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2014
·
IF 2.129
Fang fei Liu,Ying Yu,Bi xia Lin,Xiao gang Hu,Yu juan Cao,Jian zhong Wu
Daminozide (B9) is a growth inhibitor with important regulatory roles in plant growth and development. Locating and quantifying B9-binding proteins in plant tissues will assist in investigating the mechanism behind the signal transduction of B9. In this study, red fluorescent Mn-doped CdTe quantum dots (CdTeMn QDs) were synthesized by a high-temperature hydrothermal process. Since CdTeMn QDs possess a maximum fluorescence emission peak at 610 nm, their fluorescence properties are more stable than those of CdTe QDs. A B9-CdTeMn probe was synthesized by coupling B9 with CdTeMn QDs. The fluorescence intensity of the probe is double that of CdTeMn QDs; its fluorescence stability is also superior under different ambient conditions. The probe retains the biological activity of B9 and is unaffected by interference from the green fluorescent protein present in plants. Therefore, we used this probe to label B9-binding proteins selectively in root tissue sections of mung bean seedlings. These proteins were observed predominantly on the surfaces of the cell membranes of the cortex and epidermal parenchyma.
研究领域:
植物学
·
分子生物学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
DRUG DELIVERY
·
2021
·
IF 6.419
Jiali Li,Xue Jiang,Lihuan Shang,Zhen Li,Conglian Yang,Yan Luo,Daoyu Hu,Yaqi Shen,Zhiping Zhang
This study aimed to synthesize and characterize L-epigallocatechin gallate (EGCG) complexed Mn2+ nanoparticle (L-EGCG-Mn), a proof-of-concept pH-sensitive manganese core nanoparticle (NP), and compare its magnetic resonance (MR) properties with those of Gd-DTPA, both in vitro and in vivo. Reverse microemulsion was used to obtain the L-EGCG-Mn NPs. The physicochemical properties of L-EGCG-Mn were characterized using dynamic light scattering, transmission electron microscopy, and near-infrared fluorescence small animal live imaging. The in vitro relaxivity of L-EGCG-Mn incubated with different pH buffer solutions (pH = 7.4, 6.8, 5.5) was evaluated. The T1-weighted MR imaging (MRI) properties were evaluated in vitro using hypoxic H22 cells as well as in H22 tumor-bearing mice. Cytotoxicity tests and histological analysis were performed to evaluate the safety of L-EGCG-Mn. L-EGCG-Mn showed good biocompatibility, stability, pH sensitivity, and tumor-targeting ability. Moreover, when the pH was decreased from 7.4 to 5.5, the r1 relaxivity of L-EGCG-Mn was shown to gradually increase from 1.79 to 6.43 mM−1·s−1. Furthermore, after incubation with L-EGCG-Mn for 4 h, the T1 relaxation time of hypoxic H22 cells was significantly lower than that of normoxic H22 cells (1788 ± 89 vs. 1982 ± 68 ms, p=.041). The in vivo analysis showed that after injection, L-EGCG-Mn exhibited a higher MRI signal compared to Gd-DTPA in H22 tumor-bearing mice (p < .05). Furthermore, L-EGCG-Mn was found to have a good safety profile via cytotoxicity tests and histological analysis. L-EGCG-Mn has a good safety profile and pH sensitivity and may thus serve as a potential MRI contrast agent.
研究领域:
医学影像学
·
纳米医学
·
生物材料
✓ 已验证
产品关联
DOI
PubMed
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2022
·Vol. 46
·期 18
·8611-8618
·
IF 3.925
Jing Huang,Qi Shan,Yanan Fang,Ning Zhao,Xiaomiao Feng
A new simple strategy to prepare Mn–Fe Prussian blue analogue (PBA) derived oxide micromotors through co-precipitation and heat treatment is demonstrated. The morphology of the precursors could be precisely controlled from cubic-like to spherical-like by introducing citrate. Because of the synergistic catalytic reaction of bimetallic Mn–Fe oxides, micromotors with different shapes could be powered efficiently in H2O2 solution. In particular, the obtained cubic Mn–Fe oxide micromotors showed strong propulsion at a speed of 71.21 μm s−1 in 1% H2O2 solution. With dual mechanisms of adsorption bubble separation (ABS) and Fenton oxidation, the cubic Mn–Fe oxide micromotors showed extraordinary removal ability for Rhodamine B (RhB) as a simulated pollutant and could remove up to 95.2% of RhB within 30 minutes. Magnetic Fe3O4 contained in the component not only could degrade organic pollutants, but also could be recycled by magnetic field and reused with high degradation efficiency. These dual-functional metal oxide catalytic micromotors provide a practical and environmentally friendly strategy for environmental restoration.
研究领域:
环境科学
·
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2024
·
IF 5.1
Fang He,Dashuang Fu,Yunkai Wu,Xu Wang
Lead-free dielectric capacitors have become a topic of great interest in response to the ever-increasing demand for high-performance and environmentally friend energy devices. As SrTiO 3 (STO) is paraelectrics, the extremely low spontaneous polarization limits the development of its energy storage applications. In this paper, the microstructure and ferroelectric properties of STO are adjusted by grain engineering to expand its application in energy storage. STO, SrTi 1-x Mn x O 3 (STM x , x = 0.01 and 0.04) and Sr 1-y La y TiMn 0.01 O 3 (SL y TM 0.01 , y = 0.01, 0.02, 0.03 and 0.04) thin films are synthesized by the sol-gel method and thoroughly investigated on the effects of A-site (La) and B-site (Mn) co-doping effects on the crystalline phase, morphology, dielectric, ferroelectric and energy storage characteristics of STO thin film. The results indicate that the SL 0.01 TM 0.01 thin film exhibits a breakdown electric field of 3666.2 kV/cm. The SL 0.02 M 0.01 thin film exhibits excellent frequency stability and low dielectric loss (<0.01) with an energy storage density of 29.5 J/cm 3 and an efficiency of 83.7 % at 2600 kV/cm. Moreover, the sample shows good frequency stability (400–2800 Hz) and thermal stability (20−140 °C). These findings indicate the potential of (Mn, La) co-doped SrTiO 3 thin film for dielectric capacitor energy storage field applications.
研究领域:
材料科学
·
能源存储
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MOLECULAR STRUCTURE
·
2024
·
IF 4
Yue Yin,Yanming Xu,Ya-Nan Luan,Zhuo Zhao,Yihua Xiao,Changqing Liu
A novel porous Fe-Mn chitosan bead (PFMB) was fabricated through the freeze-drying technique for the enhanced oxidation and adsorption of arsenite (As(Ⅲ)) from aqueous solution. The porous internal structure of PFMB provided a significantly higher As(Ⅲ) oxidation and adsorption rate than solid Fe-Mn chitosan bead (FMB). The experimental results showed that FMB and PFMB exhibited the theoretical maximum As(Ⅲ) adsorption capacities of 27.42 and 49.80 mg/g, respectively. The real-time oxidation and adsorption progress of As(Ⅲ) onto PFMB was deeply evaluated: PFMB effectively oxidized As(Ⅲ) to As(Ⅴ) and the generated As(Ⅴ) was subsequently adsorbed. The operational parameters (initial pH, adsorbent dosage, ionic strength, and HA concentration) were thoroughly investigated and had no significant influence on As(Ⅲ) removal by PFMB. Finally, the regeneration experiment showed that PFMB can be easily regenerated and the recycled PFMB can successfully remove As(Ⅲ) in the following 5 cycles. Column experiments suggested that the column device could effectively remove the As(Ⅲ) in more than 3830 bed volume with the influent velocity at 0.5 mL/min before effluent concentration reached 0.05 mg/L. These results revealed the enhanced oxidation and adsorption performance of As(Ⅲ) onto PFMB and provided a reference for the future application of PFMB in arsenic-contaminated water treatment.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2024
·Vol. 35
·期 28
·1-10
·
IF 2.8
Si Weibin,Zhang Zhihua,Wang Yizhao,Shao Meiyang,Wei Jie
Mn–Zn ferrite (Mn 0.6 Zn 0.4 Fe 2 O 4 ) nanoparticles were synthesized using a modified sol–gel method at lower annealing temperature (minimum to 300 ℃). The experimental results and analysis indicate that these nanoparticles exhibit excellent soft magnetic properties with the ultra-high saturation magnetization ( Ms ) up to 45.1 emu/g, demonstrating the significant potential applications for biomedical industry, electronic devices, and wastewater decontamination, etc. More interestingly, Mn 0.6 Zn 0.4 Fe 2 O 4 nanoparticles exhibit unique size-dependent magnetic property, where the saturation magnetization ( Ms ) decreases with the decreasing crystalline size. Furthermore, there exists a linear proportional relationship between Ms and the reciprocal of the crystalline size (1/ D ). A novel theoretical model is subsequently proposed in the paper to elucidate the size-dependent magnetic property. Such magnetic nanoparticles composed of small-sized nanocrystalline can be analogized to a “core–shell” structure, in which the surface or interfacial state increases rapidly in proportion to the overall system. The magnetic moments are irregularly arranged in the “shell” that consists of abundant surface or interfacial states, so-called ‘magnetic disorder shell’. On the contrary, the ferrite “core” is a ferrimagnetically ordered region with a regular arrangement of magnetic moments, which is called as ‘magnetic order core’. With the decrease of crystalline size, the proportion of the ‘magnetic disorder shell’ increases. As a result, the magnetic property of the whole ferrite nanoparticle is weakened. It is believed that the present works contribute to the advancement of comprehending the correlation between the structure and property in magnetic nanoparticles.
研究领域:
材料科学
·
纳米技术
·
物理学
✓ 已验证
产品关联
DOI
高影响因子
Materials
·
2019
·Vol. 12
·期 22
·3654
·
IF 2.972
Mingxuan Ma,Xiaoyu Ma,Suping Cui,Tingting Liu,Yingliang Tian,Yali Wang
A series of MCM-41 molecular sieves with different molar ratio of template to silicon were synthesized through hydrothermal synthesis method by using cetyltrimethylammonium bromide (CTAB) as the template, diatomite as the silicon source. By using impregnation method, the Mn-Ce/MCM-41 SCR molecular sieve-based catalysts were prepared. The results observed that when the molar ratio of template to silicon was 0.2:1, the MCM-41 as catalyst carrier has the highest surface area and largest pore volume, it also presented typically ordered hexagonal arrays of uniform channels. The denitration catalytic material based on this carrier has a high number of Lewis acidic sites, and the denitration efficiency can reach more than 93%.
研究领域:
环境催化
·
材料科学
·
化学工程
·
大气污染控制
·
无机多孔材料
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Zhe Chen,Xiaobin Liao,Congli Sun,Kangning Zhao,Daixin Ye,Jiantao Li,Gang Wu,Jianhui Fang,Hongbin Zhao,Jiujun Zhang
Constructing and excavating single atom catalysts with high-density active sites and long-life durability for energy storage and conversion devices still remain bestially challenges. In this paper, a novel dual-site electrocatalyst with atomically dispersed Fe/Mn-N x -C dual metal sites embedded in N-doped carbon matrix is successfully designed and synthesized, which exhibits a state-of-the-art oxygen reduction reaction (ORR) activity with a half-wave potential (E 1/2 ) of 0.88 V (vs. RHE) as well as a superior stability. Besides, the Fe/Mn-N x -C catalyst reaches a high power density of 208.6 mW cm −2 and a specific energy density of 825.5 W h kg -1 when this catalyst is employed in Zn-air battery, which is superior to most of the reported non-precious catalysts. Furthermore, theoretical DFT calculations reveal the excellent performance is induced through a synergic dual-site cascade mechanism, which overcomes the issue of low adsorption energy (E ads ) of *OH on Fe-N x site, followed by transfer of the *OH to adjacent Mn-N x sites. As a result, the first three steps during ORR more favored occur on the Fe-N x sites instead of the Mn sites to generate *OOH and *O intermediates due to the lower energy barriers. This mechanism is further approved by addition of methanol to verify the preferred adsorption of *OH on the Mn-N x site.
研究领域:
材料科学
·
催化化学
·
能源存储与转换
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS TODAY
·
2020
·
IF 5.825
Hong Du,Miao Jiang,Xiuyun Ma,Peifang Yan,Z. Conrad Zhang
The rapid consumption of fossil resources and the grim environmental situation encourage the application of renewable and clean energy resources. Conversion of biomass, which is a kind of renewable, CO 2 neutral as well as abundant reserves carbon containing resource, is significantly important. The production of fuels from biomass by means of gasification and Fischer-Tropsch synthesis is one of the most promising routes for industrial applications. The wax-free liquid fuels synthesis directly from H 2 -deficient syngas similar to bio-gas is highly advantageous for reducing investment and operating cost. Thus, the Mn-promoted meso-ZSM-5 supported cobalt catalyst was applied for the production of wax-free liquid fuels by catalytic H 2 -deficient syngas conversion in this study. The performance of the reaction was influenced obviously by Mn content. The cobalt dispersion increased with the addition of Mn, whereas the reduction degree decreased after Mn doping. Then, the balance between the dispersion and reduction degree led to the change in CO uptake followed a volcanic curve. The catalyst with moderate amount of Mn (1 wt%) had the suitable cobalt particle size and the maximum CO uptake. Thus, the highest CO conversion was obtained over Co-1Mn/meso-ZSM-5 catalyst thanks to its maximum exposed active sites. The appropriate amount of Mn addition also resulted in the decreasing of CH 4 selectivity. The highest space time yield of liquid fuels was acquired over the Co-1Mn/meso-ZSM-5 catalyst from H 2 -deficient syngas conversion under the moderate conditions.
研究领域:
能源化学
·
催化反应工程
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Wei Zhang,Wei Liu,Guoliang Li,Wei Du,Jianbo Lu,Jianguo Song,Qixia Yang,Xiangming Li,Huizhong Xu,Xu He,Jun Ma
The para arsanilic acid ( p -ASA) used as feed additive in the poultry and swine industries tends to transform into more toxic inorganic arsenic (As(V) and As(III)), leading to a greater risk to human health and environmental system. In this study, simultaneous adsorption and oxidation of p -ASA was achieved by a synthesized highly efficient nanostructured Fe-Ti-Mn composite oxide (FTMO), with a high specific surface area of 424.7 m 2 /g. The maximum adsorption capacity for p -ASA could be as high as 45.6 mg/g, meanwhile the combined oxidation/photo-oxidation processes led to the formation of intermediate containing hydrazine group, however, without release of toxic inorganic As(III) and As(V). The p -ASA adsorption by FTMO was verified as the chemisorption process with the formation of inner-sphere complexes at the solid/water interface, which was prominently influenced by solution pH, coexisting ions and humic acid, however relatively insensitive to ionic strength. The systematic characterization by FTIR, XPS, EPR and XANES revealed that Fe phase of FTMO played the dominant role for p -ASA adsorption, while Mn and Ti phases were responsible for the oxidation and photo-oxidation of p -ASA, respectively.
研究领域:
环境科学
·
材料科学
·
毒理学
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2023
·
IF 8.4
Cong Qin,Zhanxiang Wei,Bing Wang,Yingde Wang
In the realm of gas sensors, p-type metal oxide semiconductor (MOS) usually exhibits inherently low sensitivity toward target gases caused by the hole accumulation layer configuration , which seriously hinders its practical application. Diatomics co-doping is an efficient tactic for adjusting the characteristics of MOS related to gas-sensing due to their synergistic effect . In this work, we controllably synthesized bare Co 3 O 4 , Sn-doped Co 3 O 4 , Mn-doped Co 3 O 4 and Sn/Mn co-doped Co 3 O 4 nanosheets . The experimental results reveal that Sn/Mn co-doped Co 3 O 4 sample presents porous nanosheets structure. 1 mol% Sn/Mn co-doped Co 3 O 4 sensor presents enhanced response [(R g -R a )/R a = 330 %∼40 ppm at 150 °C] toward CO compared with the bare Co 3 O 4 , 1 mol% Sn-doped Co 3 O 4 , and 1 mol% Mn-doped Co 3 O 4 nanosheets. Besides, 1 mol% Sn/Mn co-doped Co 3 O 4 nanosheets show a low limit of detection (500 ppb/experimental value), good stability and selectivity. We infer that the good CO-sensing properties may be ascribed to the oxygen vacancies defects generated by Sn 4+ and Mn 2+ /Mn 3+ co-doping, high Co 3+ ratio, and high specific surface area. This study affords an effective co-doping strategy for enhancing the gas-sensing performances of p-type MOS.
研究领域:
材料科学
·
传感器技术
✓ 已验证
产品关联
DOI
高影响因子
Coatings
·
2024
·Vol. 14
·期 11
·1392
·
IF 2.9
Yangyang Zhang,Hui Li,Erping Wang,Jingxia Gao,Liqin Yue,Miao Zhao,Ling Zhang
NaNbO3-based ferroelectric composites are regarded as a highly promising typical energy storage material. In this work, 0.02xMnO2−(1−x)NaNbO3−xBi0.5Na0.5TiO3composites were prepared by the solid-state sintering method and their microstructure, energy storage performance, and temperature stability were analyzed. As observed by the SEM images, the addition of Bi0.5Na0.5TiO3to NaNbO3in appropriate amounts can effectively suppress grain growth, which is beneficial for improving the breakdown field strength. Whenx= 0.3, an optimal value of 210 kV/cm is achieved. Meanwhile, as 2θ = 33.2°, the most intense XRD peak can be observed, indicating excellent solid solubility between the phase components. Consequently, 0.006MnO2–0.7NaNbO3–0.3Bi0.5Na0.5TiO3composites demonstrated an impressive discharging storage density of 2.464 J/cm3and a considerable energy storage efficiency of 85.8%. In addition, within the temperature range of 30–80 °C, the fluctuation in energy storage density remains below 10%. All the above performances indicate that this type of material exhibits excellent practicality in the field of pulse power supply.
研究领域:
材料科学
·
能源材料
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）