OPTICAL MATERIALS
·
2021
·
IF 3.08
Panpan Du,Qi Zhu,Xiaodong Li,Xudong Sun,Byung-Nam Kim,Ji-Guang Li
A series of garnet-type Li 6 CaLa 2(1- x ) Nb 2 O 12 : x RE phosphors (LCLN: x RE, RE = Pr, Sm, Tb and Dy) were prepared via sol-gel processing and subsequent calcination for the first time, with the course of phase evolution and the characteristics of the LCLN host and RE 3+ luminescence being investigated in detail. It was found that ∼900–1000 °C is a suitable temperature for precursor calcination to produce the garnet phase and LCLN has a relatively low phonon energy (∼725 cm −1 ) and a relatively wide bandgap (∼4.53 eV) for luminescence. The LCLN:0.012Pr, LCLN:0.04Sm, LCLN:0.06 Tb and LCLN:0.06Dy typical phosphors were analyzed to have dominant excitation/emission bands at ∼278/489, 265/614, 268/549 and 264/581 nm, emission colors of white, orange, green and yellowish white, and fluorescence lifetimes of ∼0.43, 0.74, 0.90 and 0.44 ms, respectively. Temperature-dependent photoluminescence found that the four phosphors maintained ∼28, 37, 45 and 56% of their room-temperature intensities at 423 K, with activation energies for thermal quenching of ∼0.37, 0.29, 0.34 and 0.25 eV, respectively. The results demonstrated that the Li-stuffed LCLN garnet could be a suitable host for UV excitable multicolor phosphors.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2023
·
IF 22.1
Minzhi Ma,Zeai Huang,Lina Li,Wenda Zhang,Rui Guo,Ruiyang Zhang,Wenjun Fa,Chunqiu Han,Yuehan Cao,Shan Yu,Ying Zhou
The performance of photocatalytic reduction CO 2 to CH 3 OH is intimately tied to the photogenerated electron density of the active center, because CH 3 OH formation involves a 6-electron transfer process. However, the random migration of photocarriers in the photocatalysts is severely not conducive to the directional delivery and enrichment of photogenerated electrons to active sites, leading to poor photocatalytic activity for CO 2 to CH 3 OH. Herein, we reported a coordination environment engineered Pr single-atom catalyst for boosting the photogenerated electron density of the active sites, achieving the high-efficiency photoreduction of CO 2 to CH 3 OH. The carbon nitride (CN) supported Pr single-atom with oxygen coordination was designed via a three-step pyrolysis process . Then, the engineered oxygen coordination configuration for the Pr single-atom (Pr 1 -N 4 O 2 ) was successfully achieved. Importantly, this Pr 1 -N 4 O 2 sites can induce photogenerated electrons more easily to accumulate on the Pr atom as compared to the reference catalyst of the Pr atom without oxygen coordination (Pr 1 -N 6 ). Moreover, the formed atomically dispersed Pr 1 -N 4 O 2 active centers with ultra-high Pr loading (21.05 wt%) can promote CO 2 adsorption and activation, and provide a high density of active sites for CO 2 photoreduction. As a result, the optimized Pr 1 -N 4 O 2 /CN exhibited a boosted photoreduction of CO 2 to CH 3 OH activity (511.1 μmol g −1 h −1 ), which was up to 28.9 and 1.9 times higher than those of CN (17.7 μmol g −1 h −1 ) and Pr 1 -N 6 /CN (274.1 μmol g −1 h −1 ), and preferable to most reported work under similar catalytic conditions. Our findings can provide a fresh prospect for developing innovative SACs to enhance the photoreduction of CO 2 to CH 3 OH activity.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Energy and Sustainability Research
·
2023
·Vol. 4
·期 9
·2300023
·
IF 5.8
Shuai Zhang,Mingzi Sun,Leilei Yin,Siyuan Wang,Bolong Huang,Yaping Du,Chun-Hua Yan
The oxygen evolution reaction (OER) is critical for renewable energy conversion and storage devices. However, the rational design of electrocatalysts with suitably high efficiency and stability in strongly acidic electrolytes remains a major challenge. Herein, a solid-phase synthesis strategy is developed for the preparation of Ir-Ln (Ln = La, Ce, Pr, Nd) alloy nanoparticles with uniform particle size on carbon supports as superior acidic OER catalysts. Tailoring by the rare earth (RE) elements, Ir 2 Pr achieves a maximum mass activity of 2.10 A mg −1 Ir at 300 mV overpotential and stability over 200 h at 10 mA cm −2 in 0.5 m H 2 SO 4 , which is 9.5 and 20 times higher to pure Ir nanoparticles. Furthermore, Ir 2 Pr alloy nanoparticles exhibit excellent durability in strongly acidic electrolytes. Theoretical calculations have confirmed that the OER performances are strongly related to the RE elements in the alloy, where the d-band centers show a consistent trend with the overpotential. Moreover, the highest electroactivity of Ir 2 Pr is attributed to the improved electron transfer by 4 f orbitals and the suitable binding strength of intermediates. Herein, a fundamental understanding of the lanthanide–electrochemical performance relationship is provided and will also inspire the rational design of efficient nanoscale RE alloy electrocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2013
·
IF 3.548
Ying Wang,Jun Peng,Chen Zhou,Zi-Yian Lim,Chunzheng Wu,Shuang Ye,Wei Guo Wang
Ni/ x Pr-Al 2 O 3 ( x = 5, 10, 15, 20 wt%) catalysts with an application in autothermal reforming of methane were prepared by sequential impregnation synthesis; its catalytic performance was evaluated and compared with that of Ni/γ-Al 2 O 3 catalyst; the physicochemical properties of the catalysts were characterized by X-ray diffraction (XRD), Transmission electron microscope (TEM), X-Ray Photoelectron Spectrometer (XPS), Thermo Gravimetric Analyzer (TGA) and H 2 -temperature programmed reduction techniques (TPR). The results showed that Pr addition promoted the reduction of nickel particle size on the surface. TPR experiments suggested a heterogeneous distribution of nickel oxide particles over x Pr-Al 2 O 3 supports and the promotion of NiO reduction by Pr modification. The CH 4 conversion increased with elevating levels of Pr addition from 5% to 10%, then decreased with Pr content from 10% to 20%. For the stability catalytic tests, Ni/ x Pr-Al 2 O 3 catalysts maintained the high activity after 48 h while Ni/Al 2 O 3 had a significant deactivation.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Jiabing Chen,Xiaowei Zhu,Mengheng Wang,Xingmao Jiang,Xiaojun Lu
The reaction rate of alkoxycarbonylation is typically lower when using heterogeneous catalysts compared to homogeneous catalysis, primarily due to the reduced ability of the active sites to activate the reactants. To address the insufficient activation of reactants on the Ru/CeO 2 catalyst for ethylene methoxycarbonylation, this study investigates the doping of CeO 2 with Pr 3+ ions. By substituting Ce 4+ with Pr 3+ in the CeO 2 , richer oxygen vacancies are generated, which enhance the activation of CH 3 OH. This doping significantly increases the reaction rate of ethylene methoxycarbonylation to methyl propionate (MP), achieving a rate of 86.1 g·g Ru -1 ·h −1 while maintaining a selectivity of over 99 %. Notably, Pr doping also induces the formation of Ru-O-Ce species in the catalyst, which hinders the reduction of Ru species. However, this hindered reduction is counterbalanced by the enhanced dispersion of Ru species, as Pr doping promotes the formation of smaller Ru nanoparticles. Thus, an optimal level of Pr doping exerts a synergistic effect by positively influencing both the CeO 2 support and the Ru metal, thereby improving their respective abilities to activate the reactants and enhancing the overall performance in the ethylene methoxycarbonylation reaction to produce MP.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2013
·Vol. 3
·期 48
·26367-26375
·
IF 2.562
Lining Sun,Yannan Qiu,Tao Liu,Hongshang Peng,Wei Deng,Zhijuan Wang,Liyi Shi
The homogeneously transparent hybrid gels (Ln–N–P-gel, Ln = Sm, Yb, Nd, Er, Pr, Ho, Tm) containing lanthanide complexes (by using dinaphthoylmethane (dnm) as the primary ligand and 1,10-phenanthroline (phen) as the synergic ligand) via the in situ approach have been prepared. The dnm ligand was synthesized and adopted with the aim to sensitize the lanthanide ions with visible light. The properties of Ln–N–P-gels were investigated by Fourier-transform infrared (FT-IR), diffuse reflectance (DR), scanning electron micrographs (SEM), fluorescence spectra and thermogravimetric analyses. The results reveal that the lanthanide complexes are successfully in situ synthesized in the corresponding Ln–N–P-gels. Under the excitation of visible-light, the Ln–N–P-gels showed the respective visible (Sm3+) and near-infrared (Sm3+, Yb3+, Nd3+, Er3+, Pr3+, Ho3+, Tm3+) luminescence. The near-infrared (NIR) luminescence of Sm3+, Pr3+, Ho3+, and Tm3+ complexes sensitized by visible-light had been rarely reported previously, which is highly desired for biomedical and photonics applications. Based on the relevant energy levels, a model was proposed to explain the visible-NIR luminescence of the Ln–N–P-gels based on the visible-light excitation.
✓ 已验证
DOI
高影响因子
MINERALS ENGINEERING
·
2022
·
IF 5.479
Wenjie Zhang,Yunpeng Du,Xiong Tong,Xian Xie,Dongxia Feng,Qiang Song
As the most important method for the separation and purification of rare earth elements, solvent extraction is widely used in industry. HDEHP (Di(2-ethylhexyl) phosphoric acid) has become the most commonly used organic extractant because of its high separation factor for rare earth elements and large processing capacity. However, the large amount of ammonia nitrogen wastewater generated during the extraction process creates huge pressure on the environment. The tartaric acid complexing agent has been added to the aqueous phase to improve the extraction performance of HDEHP without saponification. This can effectively avoid the generation of ammonia nitrogen wastewater, which is more in line with the concept of green production. In this study, the effect of tartaric acid on the separation of Pr and Nd by HDEHP in hydrochloric acid and the corresponding mechanism are investigated. This study showed that the addition of tartaric acid could significantly increase the separation coefficient of HDEHP for Pr and Nd. When the tartaric acid concentration was 0.4 mol/L and the solution pH was 2.5, the separation coefficient reached β Nd/Pr = 1.85, which was higher than the separation coefficient of HDEHP for Pr and Nd in the saponification system. Combining Fourier-transform infrared spectroscopy, nuclear magnetic spectroscopy other analysis and detection methods, and in-depth exploration of the extraction mechanism, the final extraction of the compound structures was determined.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2023
·
IF 5.2
Gulizhabaier Abulipizi,Zimin Yu,Shaochen Lin,Nan Zhang,Fang Xu,Xin Wang,Zhanjun Li
Chromium-doped persistent luminescence nanoparticles (PLNPs) have promising biomedical applications in X-ray charged near-infrared (NIR) luminous imaging. The persistent luminescence (PersL) property was usually adjusted by co-doping with other ions. Impurity phases were thought to be adverse to the PersL. In this study, a composite material, LiInSi 2 O 6 :Cr,Pr·2SiO 2 (LICP-S), was synthesized with a PersL peak at 800 nm after being charged by 1 Gy X-ray while LiInSi 2 O 6 :Cr (LIC) and LiInSi 2 O 6 :Cr,Pr (LICP) possessed no or very weak PersL. Distinctively, excess metastable cristobalite silica was found essential for the much more intense PersL of LICP-S than LICP and LIC. Thermostimulated luminescence spectra studies indicated that cristobalite adjusted the Pr-related traps from deep traps to shallow ones, which facilitated the room temperature PersL. The low dose X-ray charged PersL of LICP-S was applied to demonstrate the luminous labeling of a medical silicone prosthesis that was supposed to be imbedded in body for years via X-ray activated PersL imaging in vitro and in vivo . This work not only provides a kind of PLNPs with 800 nm emission suitable for low dose X-ray activation, but also an unusual strategy for trap engineering in PersL materials by designing multi-phase composites.
✓ 已验证
产品关联
DOI
高影响因子
Plants-Basel
·
2023
·Vol. 12
·期 10
·1992
·
IF 4.5
Yongyao Fu,Liling Shu,Hanyi Li,Xingming Zhang,Xuan Liu,Zhengying Ou,Xiaomeng Liang,Xiangying Qi,Liping Yang
Lilium browniivar.viridulum, commonly called Longya lily, is a well-known flower and vegetable plant in China that has poor tolerance toBotrytisfungal disease. The molecularimprovement has mainly been restricted to an efficient regeneration and transformation system. In this study, the highly efficient regeneration of Longya lily was established through the optimization of embryogenic callus, adventitious shoot and rooting induction. The major factors influencing transformation (antibiotics,Agrobacteriumconcentration, infection time, suspension solution and coculture medium) were examined. The expression responses of PR promoters (ZmPR4andBjCHI1) toB. cinereawere assessed in transgenic calli. The results showed that Murashige and Skoog (MS) medium with 1.0 mg·L−1picloram (PIC) and 0.2 mg·L−11-naphthaleneacetic acid (NAA) under light conditions and MS with 0.5 mg·L−16-benzylaminopurine (6-BA) and 1.0 mg·L−1NAA under darkness were optimal for embryogenic callus induction (64.67% rate) and proliferation (3.96 coefficient). Callus inoculation into MS containing 2.0 mg·L−1thidiazuron (TDZ), 0.4 mg·L−1NAA, 1.0 mg·L−1TDZ and 0.5 mg·L−1NAA led to shooting induction (92.22 of rate) and proliferation (3.28 of coefficient) promotion, respectively. The rooting rate reached 99.00% on MS with 0.3 mg·L−1NAA. Moreover, a transformation rate of 65.56% was achieved by soaking the callus inAgrobacteriumat an OD600of 0.4 for 10 min in modified MS without NH4NO3as the suspension solution and coculture medium before selecting 75 mg·L−1hygromycin and 300 mg·L−1cefotaxime. Only theBjCHI1promoter was obviously expressed in transgenic calli. These results could facilitate the generation of Longya lily transgenic plants with improvedB. cinerearesistance.Keywords:Lilium browniivar.viridulum;plant regeneration;callus;genetic transformation;Botrytis cinerea
✓ 已验证
DOI
PubMed
高影响因子
Journal of Materiomics
·
2023
·
IF 9.4
Fangze Chen,Dacheng Zhou,Xueqing Xiong,Juntao Pan,Donglin Cai,Ze Wei,Xiyong Chen,Yihui Liu,Nengneng Luo,Jialin Yan,Toyohisa Fujita
A series of single-phase double perovskite Pr 1- x Gd x BaCo 2- y Fe y O 5+ δ ( x = 0, 0.5 and 1, 0 ≤ y ≤ 1) materials were engineered through A/B site co-doping strategy to improve the mechanical, electrical and electrochemical properties as potential cathode materials for the application of intermediate solid oxide fuel cells (IT-SOFCs). The corresponding thermochemical stability, thermal expansion behavior, electrical conductivity and cathodic polarization resistance of the materials were systematically investigated. It was found that the A-site dual lanthanide doped Pr 0.5 Gd 0.5 BaCo 2 O 5+ δ (PGBCO) exhibits improved electrical conductivity, reduced thermal expansion, and comparatively low electrochemical polarization resistance versus single lanthanide double perovskite, PrBaCo 2 O 5+ δ (PBCO) and GdBaCo 2 O 5+ δ (GBCO) materials. Further investigation on the effect of B-site Fe-doping on Pr 0.5 Gd 0.5 BaCo 2- y Fe y O 5+ δ (PGBCF- y , 0 ≤ y ≤ 1) reveals that all the PGBCF- y compositions exhibit excellent chemical stability with Gd-doped ceria (GDC) at operating temperatures not higher than 1 100 °C. Besides, doping of Fe in B-site can effectively reduce the thermal expansion coefficients (TECs) of the Pr 0.5 Gd 0.5 BaCo 2 O 5+ δ ceramics at 30–1 000 °C. And the electrochemical impedance spectra (EIS) results show that the PGBCF- y |GDC| PGBCF- y symmetric cells have acceptable low area specific polarization resistances. Further examination of the cathodic polarization and characteristic capacitance from the AC impedance spectra by employing the relaxation time distribution (DRT) method demonstrated that charge transfer is the dominating sub-process for the oxygen transport through the materials.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2016
·
IF 2.758
Hao Li,Zonglian Huang,Lijin Cheng,Shu Kong,Shaojun Liu
Novel monoclinic Bi 2 O 3 -xRE 2 O 3 -yMoO 3 (RE=Pr, Nd, Sm, and Yb) based low temperature co-fired ceramics (LTCC) systems with high sintering density and low microwave dielectric loss are synthesized by conventional solid state reaction technique. The structure and dielectric properties of Bi 2 O 3 -xRE 2 O 3 -yMoO 3 ceramics are investigated. Dense BiNdMoO 6 ceramics sintered at 900 °C for 8 h in air have a low dielectric constant ε r =~7.5, a high quality factor Q × f =~ 24, 800 GHz at 7.0 GHz, and τ f =~−16 ppm/̊C. Especially, good chemical compatibility of BiNdMoO 6 with Ag electrodes is represented as well. In contrast, BiSmMoO 6 ceramics sintered at 1000 °C for 8 h show enhanced Q×f =~43, 700 GHz at 7.8 GHz with ε r = ~8.5 and τ f = ~−27 ppm/°C. Bi 2 O 3 -xRE 2 O 3 -yMoO 3 (RE=Pr, Nd, Sm, and Yb) based ceramics could be considered as promising microwave ceramics for LTCC applications.
研究领域:
材料科学
·
电子工程
✓ 已验证
DOI
高影响因子
OPTICAL MATERIALS
·
2026
·
IF 4.2
Gulizhabaier Abulipizi,Leping Ding,Juanjuan Zhou,Xiao Ma,Chaomin Qu,Ziang Zong,Yawen Zheng,Huai Chen,Zhanjun Li
Persistent luminescence (PersL) materials have unique long-term separable excitation-emission properties. In this study, intrinsic near-infrared (NIR) PersL of Ti 3+ is found at 760 nm in undoped Na 0·5 Y 0·5 TiO 3 (NYT) after being illuminated to room light or red LED illumination. The low symmetric monoclinic perovskite structure of NYT leads to energy level splitting of Ti 3+ into 2 E 1/2 and 1 E 2/2 , which generates a new PersL excitation peak at ∼650 nm. Direct electron transfer from excited Ti 3+ to oxygen vacancy is verified during the PersL charging process by X-ray photoelectron spectroscopy which avoids cross-band transition. Further, double band visible/NIR PersL is realized by introducing Pr 3+ into NYT (Na 0·5 Y 0·5 TiO 3 :Pr, NYT-Pr) at 614 and 760 nm, respectively. By observing the anti-Stokes PersL of Pr in NYT-Pr at 614 nm that is rechargeable at 660 nm, a phonon-assisted charging mechanism is proposed, in which Ti 3+ absorbs excitation and phonon energy to realize electron transfer to oxygen vacancy ( V O ). Based on single band PersL NYT and double band PersL NYT-Pr, triple modal optical information encryption was realized by applying their visible fluorescence/visible PersL/invisible NIR PersL properties, showing different levels of optical information. NYT-Pr integrates traditional visible PersL by naked eyes and invisible NIR PersL imaged by CCD camera together, and will find promising applications in modern optics and bio-optics.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）