ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2015
·Vol. 22
·期 14
·11109-11117
·
IF 2.828
Zhang Ruichang,Zhang Haibo,Tu Chen,Hu Xuefeng,Li Lianzhen,Luo Yongming,Christie Peter
Toxicity of engineered nanoparticles on organisms is of concern worldwide due to their extensive use and unique properties. The impacts of ZnO nanoparticles (ZnO NPs) on seed germination and root elongation of corn ( Zea mays L.) and cucumber ( Cucumis sativus L.) were investigated in this study. The role of seed coats of corn in the mitigation toxicity of nanoparticles was also evaluated. ZnO NPs (1,000 mg L −1 ) reduced root length of corn and cucumber by 17 % ( p < 0.05) and 51 % ( p < 0.05), respectively, but exhibited no effects on germination. In comparison with Zn 2+ , toxicity of ZnO NPs on the root elongation of corn could be attributed to the nanoparticulate ZnO, while released Zn ion from ZnO could solely contribute to the inhibition of root elongation of cucumber. Zn uptake in corn exposed to ZnO NPs during germination was much higher than that in corn exposed to Zn 2+ , whereas Zn uptake in cucumber was significantly correlated with soluble Zn in suspension. It could be inferred that Zn was taken up by corn and cucumber mainly in the form of ZnO NPs and soluble Zn, respectively. Transmission electron microscope confirmed the uptake of ZnO NPs into root of corn. Although isolation of the seed coats might not be the principal factor that achieved avoidance from toxicity on germination, seed coats of corn were found to mitigate the toxicity of ZnO NPs on root elongation and prevent approximately half of the Zn from entering into root and endosperm.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COORDINATION CHEMISTRY
·
2016
·
IF 1.756
Xiuling Feng,Wanping Chen,Bolin Xiang
To investigate the effect of different imidazole-containing ligands on the structure of coordination polymers, two new Zn(II) coordination polymers based on 1,4-cyclohexanedicarboxylic acid (H2cda) and two different imidazole-containing ligands, [Zn(cda)(bib)0.5]n (1) and [Zn(cda)(bmib)0.5]n (2) (bib = 1,4-bis(imidazol-1-yl)benzene and bmib = 1,4-bis(2-methylimidazol-3-ium-yl)benzene), have been synthesized and characterized by single-crystal X-ray diffraction. Complex 1 shows a 3-D structure with point symbol (4.82.103).(4.82). Complex 2 displays a 2-D layer structure with an –AB– stacking sequence.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2020
·
IF 8.758
Zhen Huang,Minghu Zhao,Chen Wang,Shixing Wang,Linqing Dai,Libo Zhang
An outstanding metal–organic framework sorbent (Zn-MOF) was prepared using Zn2+ and 3-amino-5-mercapto-1,2,4-triazole to eliminate toxic metal ions from water. Zn-MOF was detected via using Fourier-transform infrared (FTIR) spectroscopy, field-emission scanning electron microscopy (FESEM), Brunauer–Emmett–Teller (BET) analysis, and X-ray photoelectron spectroscopy (XPS). Zn-MOF is stable and has a very large surface area. The uptake properties of Zn-MOF were investigated. The maximum uptake capacity of Zn-MOF for Pb, Hg, and As ions was 1097, 32, and 718 mg/g, respectively. This was obtained at pH = 4, 5, and 6, respectively. The adsorption data is in good agreement with the Langmuir and pseudo-second-order rate models, indicating that the uptake process of Zn-MOF for toxic metal ions was a single layer uptake on a uniform surface via exchange of valence electrons. Thermodynamics shows that the uptake process is autogenic and endothermic. Zn-MOF can be reused at least 6 times. Mercury and lead strongly coordinated with Zn-MOF. The interaction between arsenic and Zn-MOF is weak chemical coordination and ion exchange. Zn-MOF has wide application prospects for toxic metal ion elimination.
研究领域:
环境科学
·
材料化学
·
水净化
·
吸附技术
·
金属-有机框架（MOFs）
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Shi-Ming Li,Hong-Chan Jiang,Qing-Ling Ni,Liu-Cheng Gui,Xiu-Jian Wang
Ethane (C 2 H 6 ) and ethylene (C 2 H 4 ) have similar physical and chemical properties, which are critical and difficult for the separation of C 2 H 6 /C 2 H 4 mixtures in the petrochemical process. Traditional C 2 H 4 -selective adsorbents can separate the C 2 H 6 /C 2 H 4 mixtures, but need further desorption treatment to obtain pure C 2 H 4 production. On the contrary, high-pure C 2 H 4 can be prepared in one step by C 2 H 6 -selective porous material. Herein, we present a caged metal-organic framework ( GNU-2 ) based on Zn (II) clusters, which has advantageous adsorption sites and cavity pockets for the reverse capture of C 2 H 6 from C 2 H 6 /C 2 H 4 mixtures. At 298 K and 1 bar, high C 2 H 6 uptake (5.10 mmol g −1 ) and C 2 H 6 /C 2 H 4 selectivity (1.849) were attained based on the activated GNU-2 ( GNU-2a ), exceeding a number of top C 2 H 6 -selective adsorbents. Grand canonical Monte Carlo (GCMC) simulations exhibit that the appropriate chemical environment of nonpolar cage in GNU-2a allows it to continuously maintain closer van der Waals contacts between C 2 H 6 molecule, saturated Zn cluster and nonpolar pore surface through multiple C H···O hydrogen interactions and C H···π hydrogen interactions. Moreover, dynamic breakthrough studies also show that GNU-2a displays the actual separation performances of C 2 H 6 .
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED POWDER TECHNOLOGY
·
2022
·
IF 4.969
Ruixue Wu,Xia Zhang,Jinmiao Wang,Lulu Wang,Bin Zhu,Cungang Xu,Guanning Cui,Dongmei Zhang,Yuhua Fan
Two novel Zn-MOFs constructed from 5-hydroxy-2-nitroisophthalic acid (H 2 DIPA) and 5-(4-carboxy-2-nitrophenoxy)-2-nitroisophthalic acid (H 3 BPPA), namely: {[Zn 2 (DIPA) 2 (bimp) 5 ]·DMF·2H 2 O} n ( Zn-MOF 1 ), {[Zn 2 (HBPPA) 2 (bibp) 2 ]·2H 2 O} n ( Zn-MOF 2 ) (bimp = 1,4-di(1H-imidazol-1-yl)butane, bibp = 4,4′-bis(imidazolyl) biphenyl), have been synthesized under solvothermal conditions and characterized by single crystal X-ray diffraction, elemental analysis, IR spectra, powder X-ray diffraction (PXRD) and thermogravimetric analysis (TG). The single-crystal X-ray diffraction analysis indicates that Zn-MOF 1 exhibits an uncommon 3-nodal framework with a (4·6·8)(4·6 3 ·8 2 )(6 6 ) topology, whereas Zn-MOF 1 exhibits an uninodal 4-connected framework with a (4 4 ·6 2 ) topology. Moreover, both of the two Zn-MOFs exhibit exceptional dye adsorption capacities towards the organic dyes with high adsorption rates and excellent adsorption amounts. Particularly, Zn-MOF 1 can selectively adsorb the cationic dye malachite green (MG) whereas Zn-MOF 2 adsorb the anionic dye methyl orange (MO) when there exists another kind of dye in the system. The adsorption process can be illustrated by pseudo-second order kinetic and Langmuir isotherm, and the feasible adsorption mechanism could be the electrostatical interactions, hydrogen bonding between the MOFs and the dyes. Meanwhile, the two Zn-MOFs also show good photocatalytic degradation capabilities toward MB/MV dyes under UV irradiation, and the mechanism studies demonstrate that the main active species are ·OH radicals. Therefore, this functional MOF materials can be treated as a convenient and cost-efficient solution for the sewage handling and environmental protection.
✓ 已验证
产品关联
DOI
高影响因子
Metals
·
2022
·Vol. 12
·期 1
·149
·
IF 2.695
Chunhui Zheng,Chunlin He,Yingjie Yang,Toyohisa Fujita,Guifang Wang,Wenchao Yang
The continuous expansion of the market demand and scale of commercial amidoxime chelating resins has caused large amounts of resin to be discarded around the world. In this study, the waste amidoxime chelating resin was reutilized as an adsorbent for the removal and recovery of Pb(II), Cu(II), Cd(II) and Zn(II) ions from aqueous solutions. The physical morphology and chemical composition of the waste amidoxime chelating resin (WAC-resin) from the factory was characterized by the elemental analyzer, X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy. The influence of the initial metal ions concentration, contact time, temperature and the solution pH on the adsorption performance of the metal ions was explored by batch experiments. It was shown that the optimal pH was 4. Kinetic studies revealed that adsorption process corresponded with the pseudo-second-order kinetic model and the adsorption isotherm was consistent with the Langmuir model. At room temperature, the adsorption capacities of WAC-resin for Pb2+, Cu2+, Zn2+and Cd2+reached 114.6, 93.4, 24.4 and 20.7 mg/g, respectively.Keywords:waste amidoxime chelating resin;characterization;reutilization;heavy metals
✓ 已验证
产品关联
DOI
高影响因子
Journal of Cleaner Production
·
2020
·
IF 7.246
Dezhi Zhao,Zheng Wang,Shuang Lu,Xianming Shi
Eco-friendly adsorbents for removing heavy metals from wastewater are urgently needed. This work fabricated an amidoxime-modified polypropylene (PP) fiber as a cost-effective and recyclable adsorbent to remove heavy metals. The laboratory study aimed to evaluate the competitive adsorption of Cu(II), Pb(II) and Zn(II) onto AO-PP fiber in aqueous solutions. The adsorption isothermal data fitted the Langmuir isotherm well, and the maximum adsorption capacities (mg/g) were in the order of Cu (47.23)>Pb (45.64)>Zn (37.78) when applying the Langmuir isotherm at pH 5.0. Adsorption equilibrium could be reached within 90 min. The adsorption was pH-dependent and followed the pseudo-second-order model well. The adsorption can be explained by the coordination between N- and O-containing groups and the metallic ions. Metallic ion affinity, steric hindrance , and covalent index were the main factors affecting the competitive adsorption behavior. Regeneration experiments revealed that the obtained adsorbent maintained favorable adsorption capacity even after 20 cycles. Cement mortars incorporating the metal-adsorbed fiber exhibited improved mechanical properties and satisfactory leaching performance. This work experimentally validated the effective use of AO-PP fiber to capture heavy metals from wastewater as well as subsequent sequestration of the recycled fibers in a suitable material matrix , providing a new reference for heavy metal harvesting and final disposal.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COORDINATION CHEMISTRY
·
2018
·
IF 1.703
Guo-Cheng Liu,Yan Li,Ying Xiong,Xiang-Xiang Liu,Qiao-Min Li,Ju-Wen Zhang,Hong-Yan Lin,Xiao-Wu Li
To investigate the effect of the spacers of S-/O-bridged dipyridylamides on the structures of Co(II)/Zn(II) complexes, [Co(L1)(chda)]·1.5H2O (CP1), [Co(L2)(chda)] (CP2), [Zn(L1)(hip)]·DMA·2H2O (CP3), and [Zn(L2)(hip)]·2.8H2O (CP4) [L1 = N,N′-bis(pyridine-3-yl)thiophene-2,5-dicarboxamide, H2chda = trans-1,4-cyclohexanedicarboxylic acid, L2 = N,N′-bis(pyridine-3-yl)-4,4′-oxybis(benzoic) dicarboxamide, H2hip = 5-hydroxyisophthalic acid, DMA = N,N-dimethylacetamide], have been solvothermally synthesized. X-ray single-crystal diffraction shows that CP1 is a 2-D 3,5-connected network based on Co-L1 linear chains and (Co-chda)2 double chains. CP2 features a 1-D structure derived from 1-D wave-like (Co-chda)2 double chains decorated by terminal L2 ligands. CP3 and CP4 show wave-like (4,4) networks constructed by 1-D Zn-L1 zigzag and Zn-hip zigzag (for CP3)/linear (for CP4) chains. The effect of the spacers of S-/O-bridged dipyridylamides on the structures of the title complexes was discussed. Electrochemical behaviors of CP1–CP2 and solid-state luminescent properties of CP3–CP4 were studied. The luminescence investigations show that CP3 and CP4 are recycled fluorescent probes for environmentally relevant Fe3+ ions. The photocatalytic properties for the degradation of methylene blue (MB) under ultraviolet light irradiation of CP3–CP4 and the recyclable materials after fluorescent sensing Fe3+ ions (named CP3@Fe3+ and CP4@Fe3+) have also been investigated.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2025
·
IF 5.1
Xiaoyun Qin,Qinyuan Lou,Yiying Ling,Zhihao Zheng,Xiaomei Qin,Fenghua Chen,Jianbo Zhao,Yanghai Gui,Huishi Guo,Chao Zhao,Zhen Zhang
In the process of industrial wastewater discharge, water pollution remains a pressing challenge, with heavy metal pollution being the most critical issue. Electrochemical sensors offer advantages such as rapid response time, ease of integration with microprocessors for on-site testing. This paper proposes the use of self-assembled polystyrene (PS) microspheres as electrode modification materials, leveraging their ordered assembly structure to reduce signal differences between electrodes from different batches, thereby preparing an electrochemical sensor with good repeatability for the determination of heavy metal ions (HMIs) Cu(II), Zn(II), and Pb(II). The experiment employed square wave anodic stripping voltammetry (SWASV) to collect the stripping currents. The designed sensor exhibited sensitivities of 0.905 μA/μM, 0.408 μA/μM, and 0.264 μA/μM, as well as limits of detection (LODs) of 0.13 μM, 0.25 μM, and 0.29 μM (S/N = 3) for Cu(II), Zn(II), and Pb(II), respectively. To enhance detection accuracy, peak current, full stripping current, and feature current were respectively input combined with machine learning (ML) algorithms to construct prediction models to evaluate the performance of the sensor. The results demonstrated that the constructed RF-Feature model significantly improved detection accuracy. It demonstrated excellent reliability, with R 2 values of 0.9952, 0.9973, and 0.9976, and root mean square error (RMSE) values of 0.6580 μM, 0.5838 μM, and 0.8164 μM, for Cu(II), Zn(II), and Pb(II), respectively. The detection range was 1 μM to 70 μM. Furthermore, the effectiveness of the sensor in practical applications was validated by detection in real wastewater samples from industrial and hospital emissions. These results were validated using an inductively coupled plasma mass spectrometry (ICP-MS) method.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COORDINATION CHEMISTRY
·
2013
·
IF 1.801
Zhong-Ming Yang,Hui Zhu,Juan Sun,Shao-Song Qian,Meng-Na Cai,Hai-Liang Zhu
Five new Cu(II), Zn(II), and Ni(II) 3-(4-nitrophenyl)acrylic acid complexes were synthesized and evaluated for inhibitory activity on jack bean urease. All five complexes were structurally determined by single crystal X-ray analysis. Compared with the positive reference acetohydroxamic acid (IC50 = 13.25 μM), Cu(II) complexes 3 and 4 showed the strongest inhibitory activity against jack bean urease (IC50 = 1.23 and 1.17 μM). Ni(II) and Zn(II) complexes also exhibited inhibitory activities (IC50 = 10.09–13.10 μM).
研究领域:
无机化学
·
药物化学
·
生物无机化学
·
酶抑制
·
晶体学
✓ 已验证
DOI
高影响因子
Journal of Cleaner Production
·
2022
·
IF 11.072
Jing Wang,Ru-yi Zhou,Jun-xia Yu,Hui-sheng Wang,Qiu-yan Guo,Ke-qi Liu,Hao-dong Chen,Ru-An Chi
Hydrometallurgy leaching is a common method used to recycle heavy metals from electroplating sludge , but the subsequent separation of heavy metals from the complex leaching solution is difficult. In this study, Cu(II), Zn(II), and Cr(III) were sequentially recycled from electroplating sludge by an on-line biosorption method with dosage controlling. The results showed that the three metals mainly existed in their labile forms and could be leached by HNO 3 . A series of amine-modified bagasse biosorbents were prepared, and diethylenetriamine-modified sorbent was chosen and fixed in a column to remove heavy metals from the leaching solution. Sorbent dosage experiments showed Cu(II) was recycled exclusively at a dosage of 1.5 g/L, while Zn(II) and Cr(III) were recycled simultaneously at a dosage of 3.8 g/L when treating 800 mL of a leaching agent containing 13.4, 9.9, and 7.1 mg/L of Cu, Zn, and Cr. A linear relationship between the dosage and amount of adsorbed metal ions was obtained. The XPS results illustrated that the column had an adsorption affinity order of Cu(II)>Zn(II), Cr(III)≫Ca(II), Mg(II). Cu(II) was enriched in the foot layer, and Zn(II) and Cr(III) were enriched in the middle layer of the column, while co-ions could not be absorbed. According to these results, Cu(II), Zn(II), and Cr(III) could be sequentially recycled by using these columns in-series.
研究领域:
环境科学
·
冶金工程
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2018
·
IF 5.667
Jidong Zhang,Mengyao She,Jie Li,Cuiling Wang,Shen Wang,Ping Liu,Shengyong Zhang,Jianli Li
A series of naphthalene carbohydrazone based fluorescent chemosensors L 1 -L 4 were developed for the detection of Zn 2+ by significant fluorescence enhancement. The binding ratio of the L 1 -Zn 2+ complex was determined by a Job’s plot to be 1:1 and confirmed by ESI–MS studies. The corresponding of the L 1 -Zn 2+ ensemble was elucidated through X-ray crystallography along with spectroscopic studies. Furthermore, the L X -Zn 2+ (X = 1–2) complexes can specifically detect pyrophosphate (PP i ) in HEPES buffer solution through fluorescence quenching. The detection limit of L X -Zn 2+ (X = 1–2) for PP i sensing were calculated to be as low as 2.54 ppb and 0.94 ppb, respectively. In addition, due to their good cell membrane permeability and low cytotoxicity, L 1 -L 4 have been applied to sequentially detect Zn 2+ and PP i in living cells. More importantly, the electronic effect of substitute groups on fluorescence signaling have been studied by substituent properties ranging from electron-donating to electron-withdrawing, which sets up a promising strategy for the rational design of fluorescent sensors.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）