文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第1069至1080个,产品总数1,406个

切换升序
Ionic liquids
JOURNAL OF CHEMICAL THERMODYNAMICS · 2019 · IF 2.29

Experimental and simulation study of CO2 and H2S solubility in propylene carbonate, imidazolium-based ionic liquids and their mixtures

Zhijun Zhao,Ying Huang,Zhaohuan Zhang,Weiyang Fei,Mingsheng Luo,Yongsheng Zhao

Currently, solvent-based absorption is known as an effective technology to capture acid gases, e.g., CO 2 or H 2 S. In this work, the constant-volume method is used to determine CO 2 and H 2 S solubility in propylene carbonate (PC), imidazolium-based ionic liquids (ILs): 1-butyl-3-methylimidazolium tetrafluoroborate [Bmim][BF 4 ], 1-hexyl-3-methylimidazolium tetrafluoroborate [Hmim][BF 4 ], and 1-octyl-3-methylimidazolium tetrafluoroborate [Omim][BF 4 ], and their mixtures at temperature from 303.15 to 333.15 K under pressures up to about 1 MPa. Besides, the quantum chemistry-based COSMO-RS models are used to predict the vapor pressure and the solubility in these solvents. The experimental results illustrate that adding [Omim][BF 4 ] into PC can improve the CO 2 and H 2 S solubility and the H 2 S/CO 2 selectivity compared with the pure PC, which increases with the increasing [Omim][BF 4 ] mass fraction in the mixtures. The simulation with COSMO-RS shows the vapor pressures of PC in the mixtures decreases with the increasing [Omim][BF 4 ] mass fraction. Moreover, the prediction results show that COSMO-RS-Lei model is in much better agreement than COSMO-RS (ADF 2005) for predicting both CO 2 and H 2 S solubility and the prediction accuracy of CO 2 is better than that of H 2 S. Finally, the mixtures of PC and [Omim][BF 4 ] may be used as promising physical solvents to capture CO 2 and H 2 S selectively with high partial pressures because they connect the advantages of organic solvents and ILs.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Lubrication Science · 2022 ·Vol. 34 ·期 6 ·428-439 · IF 1.307

Tribological properties of borate ionic liquids with low corrosion grade and excellent thermal stability in 500 N base oil

Feiming Wang,Xing Gao,Shuliang Zang,Guichun Deng,Shuang Yue

Two borate ionic liquids 1-Butyl-3-(2-methoxy-2-oxoethyl)-imidazole bis(mandelato)-borate [MABIM][BMB]) and 1,3-Dioctylbenzotriazole bis(mandelato)-borate ([DOBI][BMB]) were synthesised and utilised as the lubricating additives. Their corrosion degrees were measured and the results show that [DOBI][BMB] and [MABIM][BMB] exhibit remarkable anti-corrosion properties ([DOBI][BMB]: 1a, [MABIM][BMB]: 1b). The 4-ball machine was employed to evaluate their tribological properties in 500 N base oil. When [DOBI][BMB] and [MABIM][BMB] were added at the concentration of 3.0 wt%, the friction coefficient of 500 N was reduced by 37.5% and 29.5%. It can be concluded from the results of XPS and SEM that a lubricating film containing iron oxide, B 2 O 3 and organic N-containing compounds have formed. And a model is proposed so as to describe the lubricating mechanism.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CATALYSIS TODAY · 2012 · IF 3.407

SBA-15 supported triazolium-based ionic liquids as highly efficient and recyclable catalysts for fixation of CO2 with epoxides

Weiguo Cheng,Xi Chen,Jian Sun,Jinquan Wang,Suojiang Zhang

A series of molecular sieve SBA-15 supported 1,2,4-triazolium-based ionic liquids (TRILs) were synthesized and employed as efficient catalysts for the synthesis of cyclic carbonates from CO 2 and epoxides. The effects of various parameters, such as functional groups, anions of the catalysts, reaction temperature, pressure, reaction time, and the amount of catalyst used, on the reaction were investigated systematically. In addition, the catalyst can be easily recovered by filtration and reused over six times without loss of catalytic activity. It was found that high yield (80–99%) and excellent selectivity (97–99%) of cyclic carbonates could be achieved at mild conditions (2.0   MPa, 110   °C and 2   h) without additional organic solvents or co-catalysts.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Green Energy & Environment · 2017 · IF 0

Efficient and recyclable Rh-catalytic system with involvement of phosphine-functionalized phosphonium-based ionic liquids for tandem hydroformylation–acetalization

Peng Wang,Xia Chen,Dong-Liang Wang,Yong-Qi Li,Ye Liu

The phosphine-functionalized phosphonium-based ionic liquids ( dppm-Q , dppe-Q , dppp-Q and dppb-Q ) as the bi-functional ligands enable the efficient one-pot tandem hydroformylation–acetalization. It was found that, in dppm-Q , dppe-Q , dppp-Q and dppb-Q , the incorporated phosphino-fragments were responsible for Rh-catalyzed hydroformylation and the phosphoniums were in charge of the subsequent acetalization as the Lewis acid catalysts. Moreover, the diphosphonium-based ionic liquid of dppb-DQ could be applied as a co-solvent to immobilize the Rh/ dppb-Q catalytic system with the advantages of the improved catalytic performance, the available catalyst recyclability, and the wide generality for the substrates.

✓ 已验证 DOI
查看原文 查看 PubMed
CATALYSIS LETTERS · 2017 ·Vol. 148 ·期 1 ·144-153 · IF 2.799

Kinetics Study of the Transesterification Reaction of Methyl Acetate with Isooctyl Alcohol Catalyzed by Dicationic Heteropolyanion-Based Ionic Liquids

Liu Yong,Liu Weihua,Shao Xiaonan,Wang Jianhong,Li Xiying,Zhang Haiyan

Abstract In this work, dicationic acidic heteropolyanion-based ionic liquids were synthesized, and used in transesterification reaction of methyl acetate with isooctyl alcohol for producing isooctyl acetate. Compared with H 2 SO 4 , and H 3 PW 12 O 40 , [Bis-BsImB][HPW 12 O 40 ] and [Bis-Bs-DABCO][HPW 12 O 40 ] shown excellent catalytic performance. The reaction kinetics and chemical equilibrium of the transesterification catalyzed by [Bis-BsImB][HPW 12 O 40 ] and [Bis-Bs-DABCO][HPW 12 O 40 ] were investigated. The effects of reaction temperature, initial reactant molar ratio, and catalyst concentration on the kinetics were studied in detail. The kinetic data were successfully correlated by a pseudohomogeneous model in the temperature range of 328.15 − 343.15 K. The simulation values obtained by the kinetic model were in good agreement with the experimental data. Moreover, [Bis-BsImB][HPW 12 O 40 ] and [Bis-Bs-DABCO][HPW 12 O 40 ] could be easily recovered and reused five times without any obvious decrease in catalytic activity. Graphical Abstract

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2017 ·Vol. 7 ·期 50 ·31663-31670 · IF 3.108

Ir/C and Brφnsted acid functionalized ionic liquids: an efficient catalytic system for hydrogenation of nitrobenzene to p-aminophenol

Hong Wang,Taotao Jiang,Lei Ma,Hanbing Wang,Xiaoliang Xu,Chunshan Lu,Xiaonian Li

In this study, we found that the phenylhydroxylamine intermediate could desorb more easily from an Ir surface than from a Pt surface, which is beneficial for inhibiting the over-hydrogenation of phenylhydroxylamine to aniline. On the other hand, the Brφnsted acid functionalized ionic liquids with sulfonic acid and bisulfate anions were acidic enough to catalyze the Bamberger rearrangement to form p-aminophenol from phenylhydroxylamine. On this basis, a new catalytic system constructed by Ir/C and Brφnsted acid functionalized ionic liquid was applied, for the first time, to the one-pot hydrogenation of nitrobenzene to p-aminophenol. Our results indicate that the PAP selectivity of Ir/C and [SO3H-bmim][HSO4] Brφnsted functionalized ionic liquid was far more than that of the traditional Pt/C and sulfuric acid catalyst system. Furthermore, the dually functionalized ionic liquid ([HSO3-b-N-Bu3][HSO4]) can be used simultaneously as an acid catalyst and also as a surfactant, due to its higher lipophilicity. Therefore, our new catalytic system has unique advantages in the hydrogenation of nitrobenzene to p-aminophenol.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
FUEL · 2023 · IF 7.4

MoS2 catalysts with adjustable size and layer structure derived from polyoxometalates-ionic liquids complexes for hydrogen production and hydrogenation

Zekun Guan,Minmin Wang,Guangxun Sun,Xin Xue,Yanfei Chen,Yu Zhang,Ting Zhao,Hongfu Shi,Chao Feng,Yuan Pan,Yunqi Liu

In the period of energy conversion, the effective utilization of fossil fuels and the development of new energy sources are becoming extremely imperative. MoS 2 have excellent catalytic activity for fuel hydrogenation and hydrogen production. However, the synthesis of highly dispersed MoS 2 that can expose more active sites has been challenging. Herein, (DODA) 6 Mo 7 O 24 with organic–inorganic core–shell structure was prepared by POMs-ILs (polyoxometalates-ionic liquids) self-assembly. MoS 2 with adjustable size and layer structure derived from (DODA) 6 Mo 7 O 24 by controllable confined-sulfidation effect for hydrogenation and hydrogen evolution reaction (HER). Among them, MoS 2 (T 280 S 1:4 t 30 ) has the lowest overpotential, and only 200 mV is needed to reach the current density of 10 mA·cm −2 . At the same time, it has the optimal hydrogenation performance with the highest selectivity for octahydroanthracene and perhydroanthracene, along with a hydrogenation percentage of 48.04 % in the process of anthracene hydrogenation. Density functional theory demonstrated that the monolayer MoS 2 was more favorable for water molecule dissociation and hydrogen molecule activation, which proves that the MoS 2 has excellent catalytic activity for HER and hydrogenation simultaneously. This work is instructive for the synthesis of MoS 2 and its application in HER and hydrogenation.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF POLYMER RESEARCH · 2015 ·Vol. 22 ·期 2 ·1-8 · IF 1.92

Synthesis of ionic liquids copolymerize styrene and their nucleation, carbon dioxide sorption effect on supercritical carbon dioxide microcellular foaming

He Zhicai,Zhong Mingqiang,Yang Jintao

Aiming to prepare polystyrene microcellular foam with improved foam morphology and high thermal stability, ionic liquids which have been well demonstrated to possess high carbon dioxide (CO 2 ) absorption capacity were introduced into polystyrene by copolymerization of styrene and polymerizable ionic liquids, i.e., vinylbenzyl trimethyl ammonium fluoroborate ([VBTMA][BF 4 ]) and vinylbenzyl trimethyl ammonium hexafluorophosphate ([VBTMA][PF 6 ]), Abbr. ILs). These copolymers showed higher glass transition temperature (T g ) and high supercritical carbon dioxide (scCO 2 ) solubility, based on which foams with smaller cell size, higher cell density, and higher thermal stability were prepared by the microcellular foaming using scCO 2 as blowing agent. The morphology of the resultant foams highly depended on the foaming temperature, ionic liquid type and content. Compared to [VBTMA][BF 4 ]-St foam, [VBTMA][PF 6 ]-St have higher CO 2 absorption and glass-transition temperature, making it exhibit superior cell morphology. This work demonstrates that the introduction of ionic liquids can benefit the morphology control and thermal stability of polymeric foams and hopefully provides a promising method for the design and preparation of polymeric foams with high performance.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2025 · IF 9.7

Interlayer functionalization of silica nanosheets derived from natural clay for stable ionic liquids immobilization and efficient carbon dioxide capture

Xiaoyu Li,Ruihong Li,Haiyang Xue,Chenyu Wang,Kang Peng

Supported ionic liquids (ILs) within porous supports are efficient carbon dioxide (CO 2 ) adsorbents and has become a promising alternative to solid amine adsorbents owing to their negligible volatility, excellent chemical/thermal stability, and non-corrosive nature. In this work, we explore the confinement of ILs within the hierarchical nanochannels of laminated silica nanosheets derived from low-cost vermiculite (AEV) for efficient CO 2 capture. A series of AEV/ILs (ILs confined within AEV) composites were synthesized via scalable wet impregnation approach, and the effects of several key factors, including ILs species, IL loading (10–50 wt%), adsorption temperature (25–65 °C), CO 2 partial pressure, and gas flow rate (50–100 mL/min), were systematically evaluated. Characterization data indicated that the ILs were successfully incorporated within the laminated porous network of AEV, leading to an intercalated confinement structure. Under atmospheric pressure and 35 °C in a 40 % CO 2 /60 % N 2 flow, the AEV/BF 4 –20 adsorbent (20 wt% 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF 4 ]) loading within AEV) achieved a CO 2 uptake of 1.28 mmol/g, combined with rapid adsorption kinetics and stable recyclability, showing only an average capacity loss of 0.78 % per cycle over long-term testing. The hierarchical porous structure of AEV appears to promote efficient ILs dispersion and enhance CO 2 diffusion, thereby improving CO 2 capture performances. Furthermore, interactions between [BMIM][BF 4 ] and AEV nanosheets, together with multiscale adsorption pathways (surface, interlayer, intraparticle), are considered to synergistically enhance the CO 2 adsorption behavior. These low-cost raw materials, uncomplicated synthesis process and highly adsorption activity make AEV/ILs composites possible for large-scale production, showing great potential for various practical CO 2 capture and separation processes.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF MOLECULAR LIQUIDS · 2025 · IF 5.2

Effect of inorganic salt on the aggregation in aqueous solution and interfacial activity of symmetrical 1,3-dioctylimidazolium ionic liquids

Wenhui Zhao,Yuqiao Cheng,Yinhao Cao,Lijun Liu,Cheng Liang,Wenxiang Zhu,Zeyang Shan

1,3-dioctylimidazolium ionic liquids ((C8) 2 mimAc) with acetate anions was synthesized and characterized by 1 H NMR, FT-IR, and TGA. The effect of inorganic salt (NaCl, CaCl 2 , and MgCl 2 ) on their solution properties and interfacial activities were systematically investigated using surface tension, dynamic light scattering (DLS), oil–water interfacial tension, and contact angle. The results showed that the addition of NaCl and MgCl 2 can decrease the critical micellar concentration (cmc) values and surface tension at the cmc. However, the distribution of (C8) 2 mimAc molecules at the air–liquid interface is reduced, and the formation of aggregates in the aqueous solution is increased by CaCl 2 . Interfacial tension and contact angle tests showed that the ability of inorganic salts to enhance oil–water interfacial activity and wettability of (C8) 2 mimAc followed the order: NaCl < MgCl 2 < CaCl 2 , which is meaningful for the application of (C8) 2 mimAc in enhanced oil recovery.

CAS / MDL: 111-86-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2021 · IF 6.707

Facile synthesis of magnetic ionic liquids/gold nanoparticles/porous silicon composite SERS substrate for ultra-sensitive detection of arsenic

Hongmei Li,Qing Wang,Ningning Gao,Jihong Fu,Xiaxia Yue,Xiaoyi Lv,FuRu Zhong,Jun Tang,Tao Wang

Developing a novel and simple route for the synthesis ultrasensitive and specific SERS substrates is highly desirable and technically important. Here, a magnetic ionic liquid (MIL) assisted strategy is developed, and the high-quality and ultra-sensitive MIL-gold nanoparticles/porous silicon (MIL-Au NPs/PSi) composite substrate were synthesized by a fast and cost effective strategy with the assistance of MIL (1-methyl-3-hexyl imidazole ferric tetrachloride ([C 6 mim]FeCl 4 ). Fundamental SERS performance of this composite substrate was evaluated using rhodamine 6G (R6G). The results showed that MIL make the Au NPs/PSi have great advantages in synergetic enhancement and stability, and the hypersensitive detection of specific substances can be realized by selecting or designing IL. Based on the particularity of MIL ([C 6 mim] FeCl 4 ′s function and structure, arsenic was detected with MIL-Au NPs/PSi substrate. The detection limit can reach 0.5 ppb, and the standard curves with regression coefficients of 0.98527 and 0.98965 were established in the linear range of 2–80 ppb and 200–800 ppb. In a word, an advanced method for the preparation of high-performance and designable SERS substrate has been developed, which will certainly show promising applications in detection technology.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
WATER RESEARCH · 2022 · IF 13.4

Efficient degradation of alkyl imidazole ionic liquids in simulated sunlight irradiated periodate system: Kinetics, reaction mechanisms, and toxicity evolution

Ruixue Guo,Yumeng Qi,Beibei Li,Jie Tian,Zunyao Wang,Ruijuan Qu

As a class of emerging aquatic pollutants, alkylimidazole-based ionic liquids (AM-ILs) have received extensive attention due to the large acute toxicity to aquatic organisms. Therefore, in order to protect both aquatic organisms and human beings, it is necessary to seek an efficient and environmental-friendly technology for removal of AM-ILs from water bodies. In this work, we found that under simulated sunlight (Xe lamp) irradiation, periodate (KIO 4 , PI) could efficiently degrade 1-hexyl-2,3-dimethylimidazolium bromide ([HMMI m ]Br), a representative AM-ILs with six carbon atoms in the side chain. Kinetics experiments on the degradation of [HMMIm]Br were performed, and the results showed that a high degradation efficiency (≥90.00%) of the cation ([HMMI m ] + ) was still maintained under harsh water conditions of strong acidity/alkaliny or with various non-target inorganic ions. More importantly, the anion of bromide ion (Br − ) was not oxidized to the carcinogenic bromate (BrO 3 − ) in current reaction system. The excited stated PI (marked as PI*) was detected by Laser flash photolysis, and it was an important reactive species for [HMMIm] + degradation. As rationalized by theoretical calculations and scavenging experiments, the main oxidation mechanisms of [HMMIm] + were hydroxyl radicals induced substitution reaction, PI* initiated electron and double oxygen transfer, and direct photolysis mediated chemical bond cleavage reaction, which contributed to 73%, 21%, and 6% of [HMMIm] + degradation, respectively. Moreover, toxicity evaluation by ECOSAR software indicated that the oxidation products were generally less toxic to three aquatic organisms (fish, water flea, and green algae) than the target molecule [HMMIm]Br. In conclusion, this work proposed novel oxidation mechanisms of sunlight-activated PI system, and the findings may inspire further researches on the application of photoactivated hypervalent acids in water purification.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。