SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Qi Xu,Song Wang,Yuntao Wang,Xiankun Wu,Jingtao Dai,Jianlan Liu,Dong Fang,Cheng Zhang,Shixin Sun,Tao Cheng,Hao Yang,Guodong Xu,XiaoMing Ren,Jiahui Kou
The utilization of carbon nitride (C 3 N 4 ) in photocatalytic CO 2 reduction faces obstacles due to significant charge recombination of photogenerated electron-hole pairs, limited light-harvesting capability, and a constrained surface area. In this study, S-C 3 N 4 /IL composites were synthesized by molecular docking of ionic liquids (IL) through S atoms in layered carbon nitride under environmental conditions by simple self-assembly technology to achieve efficient photocatalytic CO 2 reduction. Contrasted with pristine C 3 N 4 (1.1 μmol g -1 h −1 ), S-C 3 N 4 /IL demonstrated over a 300-fold increase in the rate of CO 2 reduction to CO (310 µmol g -1 h −1 ), achieving an approximate 100 % selectivity. Moreover, the possible reaction mechanism was proposed by in-situ infrared and DFT calculations. The remarkable photocatalytic efficacy of S-C 3 N 4 /IL can be ascribed to multiple factors: 1) augmented visible light absorption range and enhanced interfacial compatibility due to sulfur doping, fostering improved interaction between the amphiphilic ionic liquid and the hydrophobic C 3 N 4 ; 2) suppressed char + ge recombination, facilitating increased generation of abundant free radicals; 3) the Coulombic interaction between the IL’s anionic and cationic components with the formed electron-hole pairs, thereby impeding their recombination. Besides, ultraviolet photoelectron spectroscopy, fluorescence lifetime support these results. DFT calculation suggests S doping also plays a critical role in reducing free energy of *COOH formation. In addition, 13 C isotope experiment confirms the carbon source of CO from CO 2 . This proposition paves the way for enhancing the photocatalytic prowess of carbon nitride in CO 2 reduction.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2015
·
IF 2.515
Yang Yang,Shun Yao,Jing Lu,Xuezhi Dai,Hang Song
Phase diagrams for the binary systems ethanol or water + tropine-type ionic liquids including N-benzyl-tropine hexafluorophosphate, N-(3-methoxybenzyl)-tropine hexafluorophosphate, N-(4-nitrobenzyl)-tropine hexafluorophosphate and related ternary systems (ethanol + water + ionic liquid) were measured with equilibrium method at atmospheric pressure in the temperature range of 278.15 K to 333.15 K. With the increase of temperature, the solubility of these ionic liquids increased obviously and the temperature-sensitive property in binary solvent mixture (water + ethanol) was also proven. On the other side, cosolvency phenomenon was also found in binary system. And it was found that the cosolvency related to the ratio of water and ethanol, as well as the strength of hydrogen bonding between solvent and cationic groups of ILs. The solubility of ionic liquids in the single solvent and certain concentration of binary solvent mixture was correlated by two empirical equations (Apelblat and λh ) and two theoretical models (Wilson and NRTL) with good results. This study provides useful information for further research and application of these ionic liquids.
✓ 已验证
DOI
高影响因子
JOURNAL OF CHEMICAL THERMODYNAMICS
·
2019
·
IF 2.29
Zhijun Zhao,Ying Huang,Zhaohuan Zhang,Weiyang Fei,Mingsheng Luo,Yongsheng Zhao
Currently, solvent-based absorption is known as an effective technology to capture acid gases, e.g., CO 2 or H 2 S. In this work, the constant-volume method is used to determine CO 2 and H 2 S solubility in propylene carbonate (PC), imidazolium-based ionic liquids (ILs): 1-butyl-3-methylimidazolium tetrafluoroborate [Bmim][BF 4 ], 1-hexyl-3-methylimidazolium tetrafluoroborate [Hmim][BF 4 ], and 1-octyl-3-methylimidazolium tetrafluoroborate [Omim][BF 4 ], and their mixtures at temperature from 303.15 to 333.15 K under pressures up to about 1 MPa. Besides, the quantum chemistry-based COSMO-RS models are used to predict the vapor pressure and the solubility in these solvents. The experimental results illustrate that adding [Omim][BF 4 ] into PC can improve the CO 2 and H 2 S solubility and the H 2 S/CO 2 selectivity compared with the pure PC, which increases with the increasing [Omim][BF 4 ] mass fraction in the mixtures. The simulation with COSMO-RS shows the vapor pressures of PC in the mixtures decreases with the increasing [Omim][BF 4 ] mass fraction. Moreover, the prediction results show that COSMO-RS-Lei model is in much better agreement than COSMO-RS (ADF 2005) for predicting both CO 2 and H 2 S solubility and the prediction accuracy of CO 2 is better than that of H 2 S. Finally, the mixtures of PC and [Omim][BF 4 ] may be used as promising physical solvents to capture CO 2 and H 2 S selectively with high partial pressures because they connect the advantages of organic solvents and ILs.
✓ 已验证
DOI
高影响因子
FUEL
·
2023
·
IF 7.4
Zekun Guan,Minmin Wang,Guangxun Sun,Xin Xue,Yanfei Chen,Yu Zhang,Ting Zhao,Hongfu Shi,Chao Feng,Yuan Pan,Yunqi Liu
In the period of energy conversion, the effective utilization of fossil fuels and the development of new energy sources are becoming extremely imperative. MoS 2 have excellent catalytic activity for fuel hydrogenation and hydrogen production. However, the synthesis of highly dispersed MoS 2 that can expose more active sites has been challenging. Herein, (DODA) 6 Mo 7 O 24 with organic–inorganic core–shell structure was prepared by POMs-ILs (polyoxometalates-ionic liquids) self-assembly. MoS 2 with adjustable size and layer structure derived from (DODA) 6 Mo 7 O 24 by controllable confined-sulfidation effect for hydrogenation and hydrogen evolution reaction (HER). Among them, MoS 2 (T 280 S 1:4 t 30 ) has the lowest overpotential, and only 200 mV is needed to reach the current density of 10 mA·cm −2 . At the same time, it has the optimal hydrogenation performance with the highest selectivity for octahydroanthracene and perhydroanthracene, along with a hydrogenation percentage of 48.04 % in the process of anthracene hydrogenation. Density functional theory demonstrated that the monolayer MoS 2 was more favorable for water molecule dissociation and hydrogen molecule activation, which proves that the MoS 2 has excellent catalytic activity for HER and hydrogenation simultaneously. This work is instructive for the synthesis of MoS 2 and its application in HER and hydrogenation.
✓ 已验证
DOI
高影响因子
CATALYSIS TODAY
·
2012
·
IF 3.407
Weiguo Cheng,Xi Chen,Jian Sun,Jinquan Wang,Suojiang Zhang
A series of molecular sieve SBA-15 supported 1,2,4-triazolium-based ionic liquids (TRILs) were synthesized and employed as efficient catalysts for the synthesis of cyclic carbonates from CO 2 and epoxides. The effects of various parameters, such as functional groups, anions of the catalysts, reaction temperature, pressure, reaction time, and the amount of catalyst used, on the reaction were investigated systematically. In addition, the catalyst can be easily recovered by filtration and reused over six times without loss of catalytic activity. It was found that high yield (80–99%) and excellent selectivity (97–99%) of cyclic carbonates could be achieved at mild conditions (2.0 MPa, 110 °C and 2 h) without additional organic solvents or co-catalysts.
✓ 已验证
DOI
高影响因子
Lubrication Science
·
2022
·Vol. 34
·期 6
·428-439
·
IF 1.307
Feiming Wang,Xing Gao,Shuliang Zang,Guichun Deng,Shuang Yue
Two borate ionic liquids 1-Butyl-3-(2-methoxy-2-oxoethyl)-imidazole bis(mandelato)-borate [MABIM][BMB]) and 1,3-Dioctylbenzotriazole bis(mandelato)-borate ([DOBI][BMB]) were synthesised and utilised as the lubricating additives. Their corrosion degrees were measured and the results show that [DOBI][BMB] and [MABIM][BMB] exhibit remarkable anti-corrosion properties ([DOBI][BMB]: 1a, [MABIM][BMB]: 1b). The 4-ball machine was employed to evaluate their tribological properties in 500 N base oil. When [DOBI][BMB] and [MABIM][BMB] were added at the concentration of 3.0 wt%, the friction coefficient of 500 N was reduced by 37.5% and 29.5%. It can be concluded from the results of XPS and SEM that a lubricating film containing iron oxide, B 2 O 3 and organic N-containing compounds have formed. And a model is proposed so as to describe the lubricating mechanism.
✓ 已验证
DOI
高影响因子
Green Energy & Environment
·
2017
·
IF 0
Peng Wang,Xia Chen,Dong-Liang Wang,Yong-Qi Li,Ye Liu
The phosphine-functionalized phosphonium-based ionic liquids ( dppm-Q , dppe-Q , dppp-Q and dppb-Q ) as the bi-functional ligands enable the efficient one-pot tandem hydroformylation–acetalization. It was found that, in dppm-Q , dppe-Q , dppp-Q and dppb-Q , the incorporated phosphino-fragments were responsible for Rh-catalyzed hydroformylation and the phosphoniums were in charge of the subsequent acetalization as the Lewis acid catalysts. Moreover, the diphosphonium-based ionic liquid of dppb-DQ could be applied as a co-solvent to immobilize the Rh/ dppb-Q catalytic system with the advantages of the improved catalytic performance, the available catalyst recyclability, and the wide generality for the substrates.
✓ 已验证
DOI
RSC Advances
·
2017
·Vol. 7
·期 50
·31663-31670
·
IF 3.108
Hong Wang,Taotao Jiang,Lei Ma,Hanbing Wang,Xiaoliang Xu,Chunshan Lu,Xiaonian Li
In this study, we found that the phenylhydroxylamine intermediate could desorb more easily from an Ir surface than from a Pt surface, which is beneficial for inhibiting the over-hydrogenation of phenylhydroxylamine to aniline. On the other hand, the Brφnsted acid functionalized ionic liquids with sulfonic acid and bisulfate anions were acidic enough to catalyze the Bamberger rearrangement to form p-aminophenol from phenylhydroxylamine. On this basis, a new catalytic system constructed by Ir/C and Brφnsted acid functionalized ionic liquid was applied, for the first time, to the one-pot hydrogenation of nitrobenzene to p-aminophenol. Our results indicate that the PAP selectivity of Ir/C and [SO3H-bmim][HSO4] Brφnsted functionalized ionic liquid was far more than that of the traditional Pt/C and sulfuric acid catalyst system. Furthermore, the dually functionalized ionic liquid ([HSO3-b-N-Bu3][HSO4]) can be used simultaneously as an acid catalyst and also as a surfactant, due to its higher lipophilicity. Therefore, our new catalytic system has unique advantages in the hydrogenation of nitrobenzene to p-aminophenol.
✓ 已验证
DOI
高影响因子
CATALYSIS LETTERS
·
2017
·Vol. 148
·期 1
·144-153
·
IF 2.799
Liu Yong,Liu Weihua,Shao Xiaonan,Wang Jianhong,Li Xiying,Zhang Haiyan
Abstract In this work, dicationic acidic heteropolyanion-based ionic liquids were synthesized, and used in transesterification reaction of methyl acetate with isooctyl alcohol for producing isooctyl acetate. Compared with H 2 SO 4 , and H 3 PW 12 O 40 , [Bis-BsImB][HPW 12 O 40 ] and [Bis-Bs-DABCO][HPW 12 O 40 ] shown excellent catalytic performance. The reaction kinetics and chemical equilibrium of the transesterification catalyzed by [Bis-BsImB][HPW 12 O 40 ] and [Bis-Bs-DABCO][HPW 12 O 40 ] were investigated. The effects of reaction temperature, initial reactant molar ratio, and catalyst concentration on the kinetics were studied in detail. The kinetic data were successfully correlated by a pseudohomogeneous model in the temperature range of 328.15 − 343.15 K. The simulation values obtained by the kinetic model were in good agreement with the experimental data. Moreover, [Bis-BsImB][HPW 12 O 40 ] and [Bis-Bs-DABCO][HPW 12 O 40 ] could be easily recovered and reused five times without any obvious decrease in catalytic activity. Graphical Abstract
✓ 已验证
DOI
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2015
·Vol. 22
·期 2
·1-8
·
IF 1.92
He Zhicai,Zhong Mingqiang,Yang Jintao
Aiming to prepare polystyrene microcellular foam with improved foam morphology and high thermal stability, ionic liquids which have been well demonstrated to possess high carbon dioxide (CO 2 ) absorption capacity were introduced into polystyrene by copolymerization of styrene and polymerizable ionic liquids, i.e., vinylbenzyl trimethyl ammonium fluoroborate ([VBTMA][BF 4 ]) and vinylbenzyl trimethyl ammonium hexafluorophosphate ([VBTMA][PF 6 ]), Abbr. ILs). These copolymers showed higher glass transition temperature (T g ) and high supercritical carbon dioxide (scCO 2 ) solubility, based on which foams with smaller cell size, higher cell density, and higher thermal stability were prepared by the microcellular foaming using scCO 2 as blowing agent. The morphology of the resultant foams highly depended on the foaming temperature, ionic liquid type and content. Compared to [VBTMA][BF 4 ]-St foam, [VBTMA][PF 6 ]-St have higher CO 2 absorption and glass-transition temperature, making it exhibit superior cell morphology. This work demonstrates that the introduction of ionic liquids can benefit the morphology control and thermal stability of polymeric foams and hopefully provides a promising method for the design and preparation of polymeric foams with high performance.
✓ 已验证
DOI
高影响因子
WEAR
·
2025
·
IF 6.1
Yuchen Sun,Chaoyang Zhang,Qiangliang Yu,Mohamed Kamal Ahmed Ali
This study aims to synthesize oil additives tailored for harsh space conditions, particularly atomic oxygen (AO) exposure, to enhance the lubrication performance of aerospace systems. To achieve this, polyhedral oligomeric silsesquioxane (POSS)-based ionic liquid (IL) with varying alkyl chain lengths (n = 8,16) were synthesized through nucleophilic substitution reactions, using octyl-functionalized polyhedral oligomers and halogenated hydrocarbons as precursors. The tribological and resistance AO irradiation properties of POSS-based IL additives (POSS-8-DOSS and POSS-16-DOSS) into PAO10 base oil were systematically investigated in atmospheric and vacuum environments. The properties of the formulated oil revealed that adding 1 wt% POSS-8-DOSS resulted in improved thermal stability compared to POSS-16-DOSS. Conversely, POSS-16-DOSS exhibited better performance in terms of corrosion resistance. Notably, the formulated oil containing POSS-based IL additives reduced the friction coefficient by 39.67–40.38 % in the atmospheric environment and by 65.94–79.89 % in the atomic oxygen radiation environment. Furthermore, the antiwear properties improved by 77.50–90.14 % in the atmospheric environment. Eventually, the results of this study provide valuable insights for advancing the field of aerospace lubrication.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2024
·
IF 3.3
Guang-Xuan Zhang,Qiao-Yun Yin,Bing Wang,Li-Ying Liu,Li-Yuan Chang,Ru-Zhi Wang
All-inorganic lead-containing perovskites have shown strong luminescence, but the use of lead has hindered their commercial development due to its stability and toxicity. In this paper, we propose thermal precipitation in ionic liquids (ILs) for synthesizing Bi 3+ -doped Cs 2 ZrCl 6 double perovskites (Cs 2 ZrCl 6 :Bi 3+ (ILs)), which have a better crystallinity compared to the Cs 2 ZrCl 6 :Bi 3+ (HCl) synthesized by the traditional hydrochloric acid method. Most interestingly, the Cs 2 ZrCl 6 :Bi 3+ (ILs) exhibits ultra-high photoluminescence quantum yield (PLQY) of up to 78.52%, which is about three times higher than the Cs 2 ZrCl 6 :Bi 3+ (HCl) prepared by the traditional method. In addition, the PLQY of this paper is the highest in the reported works for the Cs 2 ZrCl 6 :Bi 3+ . It has been confirmed that the high PLQY of Cs 2 ZrCl 6 :Bi 3+ (ILs) is due to the interaction force between N atoms and perovskites in ionic liquid cations, and the cations in ionic liquids can improve the crystallinity of Cs 2 ZrCl 6 :Bi 3+ (ILs) double perovskite crystallites by passivating shallow defects. The research provides an alternative and efficient method for synthesizing stable lead-free double perovskites with good optical properties.
✓ 已验证
产品关联
DOI
高影响因子