Scientific Reports
·
2017
·Vol. 7
·期 1
·1-11
·
IF 4.259
Xie Xiang,Qin Zhen,He Yao,Xiong Penghui,Huang Zeng,Mao Yiwu,Wei Hongyuan,Zhuo Liangang
The influence of the linking group between the phosphoryl and bridging moieties in phosphoryl-containing task-specific ionic liquids (TSILs) on the extraction of uranyl ions was experimentally and theoretically investigated. A novel phosphoramidate-based TSIL with an amine group as the linking moiety resulted in a higher uranyl ion extraction efficiency compared with that of other phosphoryl-based TSILs. A distribution ratio of 4999 ± 51 can be achieved for uranyl ions. The uranyl ions (76.7 ± 1.5%) were stripped from the loaded ionic liquid phase in a single stage using 0.05 M diethylenetriamine pentaacetic acid in a 1.0 M guanidine carbonate solution. The extraction stoichiometry of the uranyl ions was determined by a slope analysis of the extraction data. Furthermore, the fundamental nature of the interaction between the phosphoramidate-based TSIL and uranyl ions was theoretically studied for the first time. The theoretical calculations demonstrated that the synergistic effect of the complexation interaction and H-bond formation between the phosphoramidate-functional ionic liquid and uranyl nitrate led to the higher extraction efficiency. These results provide a basis for rational design, synthesis and potential applications of novel TSILs for uranyl extraction.
✓ 已验证
DOI
高影响因子
TRIBOLOGY INTERNATIONAL
·
2022
·
IF 5.62
Pengjiao Zu,Yisheng Zhang,Yi Li,Songwei Zhang,Jun Li,Litian Hu
2-mercapto-5-methyl-1,3,4-thiadiazole (MMT) based ionic liquids were synthesized, their corrosion inhibition behavior and tribological performance were systematically evaluated. Electrochemical experiments showed MMT based ILs exhibited surprising corrosion inhibition efficiencies. The ILs adsorption behavior obeys Langmuir isotherm. Friction tests demonstrated MMT based ILs performed excellent lubrication properties, compared to [BMIM][BF 4 ]. Combining with analysis of SEM and XPS , it can be concluded that the prominent lubrication performance ascribed to the coexistence of adsorption layer and tribo-film. Therefore, versatile ILs designed in this paper have gathered two significant abilities for industrial applications, which are high corrosion inhibiting performance and excellent lubricating properties. This work is instructive for structure design of multifunctional ILs and will promote industrial application of MMT based ILs in the future.
✓ 已验证
DOI
高影响因子
JOURNAL OF PHYSICAL CHEMISTRY B
·
2015
·
IF 3.302
Xiaoxing Lu,Qi Cao,Jing Yu,Qunfang Lei,Hujun Xie,Wenjun Fang
Two novel aqueous two-phase systems (ATPSs) involving protic piperazinium-based ionic liquids (ILs) and anionic surfactants were found in the 1-ethylpiperazinium tetrafluoroborate ([C2pi][BF4]) + sodium dodecyl sulfate (SDS) + H2O system and the 1-phenylpiperazinium tetrafluoroborate ([Phpi][BF4]) + sodium dodecyl benzenesulfonate (SDBS) + H2O system. The ATPS regions in the ternary phase diagrams were determined, and the compositions and the microstructures of the conjugated phases were analyzed by UV–vis, 1H NMR, DLS, and cryogenic TEM measurements. The results demonstrate size-enhanced micelles for both ATPSs. The strong electrostatic interactions between the cationic moiety of IL and the anionic surfactant play a very important role in the assembly of the large aggregates, and the cation−π interactions are involved in the [Phpi][BF4] + SDBS + H2O ATPS. In addition, the small cationic moiety of [C2pi][BF4] can be packed in the micelles, while the larger hydrophilic cationic moiety of [Phpi][BF4] makes it difficult to get into the micelles, leading to the different size enhancement effects. The driving force of phase separation is the formation and distribution of the large aggregates in the aqueous solutions. This work presents a novel nonaromatic ATPS formed by a piperazinium-based IL and an anionic surfactant, in which considerable size enhancement of aggregates takes place without the assistance of aromaticity in contrast to the other aromatic ATPSs.
✓ 已验证
DOI
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2012
·
IF 4.531
Jiaheng Zhang,Min Li,Miyi Yang,Bing Peng,Yubo Li,Wenfeng Zhou,Haixiang Gao,Runhua Lu
A novel, rapid ionic liquid dispersive liquid–liquid microextraction (IL-DLLME) technique combined with magnetic retrieval (MR-IL-DLLME) has been developed and used to analyze five benzoylurea insecticides (BUs) in environmental water samples. This procedure was based on the magnetic retrieval of the ionic liquid using unmodified magnetic nanoparticles (MNPs). In this experiment, the fine ionic liquid droplets formed in aqueous samples functioned as an extractant for the extraction of BUs; after the extraction process was completed, Fe 3 O 4 MNPs were added as a carrier to retrieve and separate the ionic liquid from the sample solution. After the supernatant was removed, the ionic liquid was desorbed using acetonitrile and subsequently injected directly into an HPLC system for analysis. The optimum experimental parameters are as follows: 20 mg of Fe 3 O 4 (20 nm) as magnetic sorbents; 70 μL of [C 6 MIM][PF 6 ] as the extraction solvent; 300 μL of acetonitrile as the disperser solvent; a vortex extraction time of 90 s with the vortex agitator set at 2800 rpm and no ionic strength. Under the optimized conditions, good linearity was obtained with correlation coefficients ( r ) greater than 0.9981. The repeatability and reproducibility of the proposed method were found to be good, and the limits of detection ranged from 0.05 μg L −1 to 0.15 μg L −1 . The proposed method was then successfully used for the rapid determination of BUs in real water samples. The recoveries of five BUs at two spiked levels ranged from 79.8 to 91.7% with RSDs less than 6.0%.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2026
·
IF 4.8
Chengming Wu,Xiang Fan,Qingyao Wang,Qingwen Wei,Xinyuan Cheng,Junlei Wang,Shiyu Zhou,Wenming Huang
Benzothiazole-based BAILs with tunable acidity and low corrosivity are designed for biodiesel production. • The catalytic performance of benzothiazole-based BAILs is positively correlated with their acidity. • [HBth]CH 3 SO 3 displays outstanding catalytic activity (>97.5%) for biodiesel synthesis. • [HBth]CH 3 SO 3 exhibits excellent reusability and substrate versatility in biodiesel production. • The key fuel properties of the oleic acid-derived biodiesel fall within the limits specified by the ASTM D6751 standard. The design of highly efficient and environmentally friendly acid catalysts for sustainable biodiesel production is both appealing and challenging. In this study, three benzothiazole-based Brønsted acidic ionic liquids (BAILs) were synthesized via a one-step method and characterized systematically. Characterization results showed that the synthesized benzothiazole-based BAILs possess favorable physicochemical properties, including relatively strong acidity, high thermal stability, and low corrosivity. The catalytic performance of these BAILs exhibited a positive correlation with their acid strength. Among them, [HBth]CH 3 SO 3 demonstrated excellent catalytic performance in biodiesel production through the esterification of oleic acid (OA) with methanol, achieving an OA conversion of 97.96% under the optimal experimental parameters (3 wt% catalyst dosage, 12:1 methanol/OA molar ratio, 70 °C, and 1.5 h). This performance surpasses that of most previously reported catalysts. The outstanding catalytic performance was further supported by kinetic studies, which revealed a low activation energy of 27.14 kJ·mol −1 . Although thermodynamic analysis indicated that the esterification is endothermic and non-spontaneous, the low activation energy and strong Brønsted acidity of [HBth]CH₃SO₃ effectively drive the reaction forward, enabling high conversion under mild conditions. Moreover, [HBth]CH 3 SO 3 exhibited excellent reusability and good substrate versatility in biodiesel production from various free fatty acids (FFAs). Overall, this study presents an easily prepared, highly efficient, and low-corrosion ionic liquid catalyst for biodiesel production from FFAs, offering a useful understanding for the advancement of sustainable biofuel technology. Download: Download high-res image (161KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Materials
·
2018
·Vol. 11
·期 5
·677
·
IF 2.467
Xiaolong Zheng,Meiyu Wang,Qiuping Li
Due to the wide potential application in the fields of sensing, lighting materials, and optical–electrical multifunctional devices, rare earth complex hybrid materials have been studied extensively over the past decades. A poly(ionic liquid)/mesoporous-based hybrid system which has been functionalized by the covalently linked europium complexes was reported here. Through surface modification with a coupling agent bearing an vinyl group, MCM-41 was chosen as the carrier matrix for poly(ionic liquids) (PILs) and europium compounds, and based on that, novel luminescent hybrid materials were prepared by confining the ionic liquid and europium complexes into the inorganic Si–O frameworks. The resulting organic/inorganic materials are chemically bonded hybrids which show good photoluminescent properties such as broad excitation spectra, line-like emission spectra, and long luminescence lifetimes. The PILs/MCM-41/Eu3+hybrid reported here is a rare earth multifunctional material which is believed to have potential applications in the field of optical–electrical materials.
✓ 已验证
DOI
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2019
·
IF 4.561
Wenbo Zhu,Yongzhong Jia,Quanyou Zhang,Jinhe Sun,Yan Jing,Jie Li
With different anionic and cationic structures of ionic liquids influencing the efficiency of Li + extraction, 16 different kinds of ionic liquids with the crown ether-dichloromethane system were investigated primarily. The experimental results showed that smaller relative molecular weight , hydrophobicity , uniform electron distribution on cation, and weak electron donating on anion of ionic liquids with the ligand crown ether promoted the highest extraction of lithium ions in the dichloromethane-water system. The extraction system with [BMIm][NTf 2 ] had the largest extraction rate and distribution coefficient at 26.35% and 0.358, respectively. Cation exchange behavior between Li + in the aqueous phase and [BMIm] + in the organic phase was examined through fitting the line of Li + concentration in the organic phase and [BMIm] + concentration in the aqueous phase. The anion of [BMIm][NTf 2 ] coordinating with the cationic lithium-crown ether complex in the organic phase was also verified by infrared spectroscopy . For the thermodynamic studies in the system using [BMIm][NTf 2 ] and crown ether , the extraction process of Li + was an exothermic spontaneous reaction while lower temperature was beneficial to lithium extraction .
✓ 已验证
DOI
高影响因子
JOURNAL OF CATALYSIS
·
2024
·
IF 6.5
Liwen Wang,Zhihao Zhao,Saidi Wang,Wenxuan Zhou,Xingmei Lu,Ruiyi Yan,Jiayu Xin
The 1,3-butadiene hydroesterification products, such as methyl pentenoate and dimethyl adipate, play a significant role in the production of nylon, plasticizers, and pharmaceutical intermediates. However, due to its unique π-π conjugated system, slow reaction rate, and difficulties in controlling regioselectivity, butadiene presents itself as an incredibly challenging substrate. The development of efficient and low-cost catalysts has gained substantial attention in both theoretical studies and industrial applications due to the high cost or extremely high pressure requirements. In this study, carbonyl cobalt ionic liquids were innovatively employed as catalysts to facilitate the synthesis of monoesters from hydroesterification of butadiene under mild conditions. A series of carbonyl cobalt ionic liquids with different cations were prepared and characterized for their structural properties using IR, ESI, IC, and DFT calculations. The yield of methyl pentenoate was comparable to that of Co 2 CO 8 at 400 bar, and the catalysts exhibited high selectivity to methyl 3-pentenoates (>95 %), establishing a stable, efficient, and low-cost catalytic system. The experiments revealed that the type of the cation in ionic liquids remarkably influence their catalytic performance. Electrostatic potential calculations further confirmed that this performance is tightly related to the dissociation and migration behaviors of protons, leading to the proposal of a screening method for ionic liquids. In this paper, we further calculated the qualitative reaction kinetics and proposed a reaction mechanism in conjunction with previous studies. The reaction is hypothesized to begin with the formation of the active species HCo(CO) 4 by proton exchange of [HX] + [Co(CO) 4 ] − , in line with our experimental findings and theoretical calculations. This study presents an innovative approach to overcome the challenges associated with butadiene hydroesterification and paves the way for the development of more efficient and cost-effective catalytic systems.
✓ 已验证
DOI
高影响因子
ENERGY & FUELS
·
2025
·
IF 5.3
Mengna Xu,Weikang Gao,Chuanlei Liu,Peng Wei,Hui Sun
Selective separation of high-value bicyclic aromatic hydrocarbons (BAHs) from complex hydrocarbon mixtures is essential for enhancing the product value and utilization efficiency of the energy industry. Although COSMO-RS facilitates high-throughput screening of ionic liquids (ILs), the absence of a robust structure–performance relationship (SPR) limits the molecular-level design for separating weakly polar, structurally similar hydrocarbons. In this work, 1-ethyl-3-methylbenzimidazolium bis(trifluoromethylsulfonyl)imide ([EMBzIM][TF2N]) was identified as a promising extractant via COSMO-RS solubility predictions. Its extraction performance was systematically evaluated using liquid–liquid equilibrium experiments with both a representative four-component model oil and real hydrocarbon samples. The results indicate that [EMBzIM][TF2N] exhibits superior performance, achieving the highest distribution coefficient (0.5051) and selectivity (204.70) for aromatics at an aromatic concentration of 10 wt %. Furthermore, it demonstrated a stable extraction efficiency and facile regeneration over five consecutive cycles. Molecular polarity index calculations, interaction energy analysis, visualization of weak intermolecular interactions, and 1H NMR characterizations were employed to elucidate the molecular-level mechanism for this performance. The van der Waals interactions, significantly enhanced by the extended π-conjugation of the benzimidazolium cation, predominantly govern the extraction of aromatics. This study establishes a rational design strategy for ILs, integrating a COSMO-RS thermodynamic prediction with chemically interpretable SPR to achieve efficient separation of BAHs from hydrocarbon streams.
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Greenhouse Gas Control
·
2023
·
IF 3.9
Mengying Li,Pan Zhang,Gongda Chen,Dong Fu
The CO 2 desorption performance of N -methyldiethanolamine(MDEA)-Tetramethylammonium glycinate ([N 1111 ][Gly]), MDEA-1-butyl-3-methylimidazolium lysinate ([Bmim][Lys]) aqueous solutions was investigated. The influences of amino acid ionic liquids (AAILs) type and AAILs concentration on CO 2 desorption were demonstrated on the basis of experiments. The corrosion characteristics of 20# carbon steel in the MDEA-AAILs-CO 2 aqueous solutions were also determined, and the effects of temperature, AAILs concentration, AAILs type, and CO 2 loading on the corrosion rate were analyzed. Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance carbon spectroscopy (13C NMR) and scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) characterization were used to evaluate the CO 2 desorption mechanism and corrosion mechanism, respectively. It is found that AAILs have a good performance in the desorption process and they can effectively reduce the corrosion rate of amine aqueous solution.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CHEMICAL AND ENGINEERING DATA
·
2023
·
IF 2.6
Yupei Deng,Fahui Li,Yiyue Shen,Qianwen Jiang,Mai Ouyang,Zhenhao Fu,Huajin Du,Zeyu Chen,Guowei Wang,Linghua Zhuang
Four imidazolium ionic liquids (ILs) with vinyl and ester groups were synthesized and characterized by 1H NMR, 13C NMR, and element analysis. The refractive index, electrical conductivity (EC), and electrochemical stability window (ESW) of the ILs were determined. The effect of the alkyl chain length of the ester group and anions on electrochemical properties was analyzed by density functional theory (DFT) calculations. At the same temperatures, the EC of the ILs decreased with the increase of the alkyl chain length. The ester group and vinyl group of cations showed a negative effect on the EC. The ESW increased with the increase of the alkyl chain length. The introduction of the ester group and vinyl group decreased the cathodic limiting potential of ester-based vinylimidazolium cations. DFT simulations showed that the structure of the IL was closely related to the EC and ESW. The average hydrogen bond length increased with the increase of the alkyl chain length of the ester group. The absolute interaction energy of ILs decreased with the increase of the alkyl chain length. Introduction of the vinyl group and ester group into the imidazolium cation resulted in a stronger cation–anion interaction, strengthening the ion mobility and charge transfer, resulting in a lower EC. The information is useful for the design and optimization of ILs as electrolytes for energy storage applications.
✓ 已验证
产品关联
DOI
高影响因子
MINERALS ENGINEERING
·
2022
·
IF 5.479
Lu Xing,Xifei Ma,Kaibo Hu,Hanmeng Yuan,Jia Wei,Hongshuai Gao,Yi Nie
Since neodymium (Nd) has similar physicochemical properties to lanthanum (La), cerium (Ce) and praseodymium (Pr), their efficient separation and purification is very difficult. Three new phosphate-based ionic liquids (ILs): N,N-dimethyloctylamine bis(2-ethylhexyl)phosphate ([N 1,1,8,H ][DEHP]), N,N-dimethyldecylamine bis(2-ethylhexyl)phosphate ([N 1,1,10,H ][DEHP]), N,N-dimethyldodecylamine bis(2-ethylhexyl)phosphate ([N 1,1,12,H ][DEHP]) were synthesized and evaluated for selective separation of Nd(III) from aqueous solution. The influences concentration of Nd(III), phase volume ratio (O/A), cation chain length of ILs, extraction time, extraction temperature, salt concentration, solution acidity have on the performance of ILs for extraction separation of Nd(III) from aqueous solution were systematically investigated. It was found that the extraction efficiency ( E ) of Nd(III) using [N 1,1,8,H ][DEHP] was close to 100% at pH of 4, and that it only required 10 min to reach extraction equilibrium at 303 K. Meanwhile, the separation factors ( β ) values of β Nd/La , β Nd/Ce , β Nd/pr using [N 1,1,8,H ][DEHP] were all higher than 3. The density functional theory (DFT) results indicated that the interaction between [N 1,1,8,H ][DEHP] and Nd were stronger than that between La , Ce and Pr . In addition, almost 100% of Nd(III) could be recycled from the loaded [N 1,1,8,H ][DEHP] phase using 0.16 mol·L −1 hydrochloric acid via one step, and the E of Nd(III) by regenerated [N 1,1,8,H ][DEHP] remained about 97% after eight cycles. Moreover, the extraction mechanism of Nd(III) using [N 1,1,8,H ][DEHP] was complexation mechanism based on infrared spectroscopy and slope analysis. This work furnishes a strategy for selective separation of Nd(III) using phosphate-based ILs without diluent.
✓ 已验证
产品关联
DOI
高影响因子