JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Cong Li,Nuramina Abdukirim,Tursun Abdiryim,Ruxangul Jamal,Feng Xu,Yaoming Yu,Sihuleng Ba
Oxygen vacancy (V O ) engineering is an effective strategy for enhancing the performance of electrocatalytic CO 2 reduction (eCO 2 RR) to CO. In this study, composite materials of zinc oxide (ZnO) and polypyrrole (PPy) were prepared via in situ polymerization, with the V O concentration precisely controlled by adjusting the PPy molar ratio. The V O concentration first increased and then decreased as the PPy content decreased, while the zinc vacancy (V Zn ) concentration exhibited an opposite trend. Characterization results indicate that the PPy conjugated framework dynamically regulates the V O /V Zn concentration through electron injection, and its controllable hydrophobicity enhances CO 2 mass transfer and interfacial enrichment. Crucially, experiments reveal that a high V O concentration is key to achieving high performance, as V O reduces the activation energy barrier for C O bond cleavage through charge redistribution, synergistically optimizing the adsorption energy of the *COOH intermediate. Density functional theory calculations confirm that Vo regulates the d-band center position of ZnO and reduces the activation energy barrier for CO 2 activation. The optimal sample, V O -enriched ZnO/PPy-4, achieves an FE CO of 73.8 % at −1.6 V (vs. RHE) and stably maintains CO/H 2 ratio of 2:1 at −1.2 V (vs. RHE), with < 5 % decay rover 8 h. This study demonstrates a strategy for obtaining high-performance electrocatalytic CO 2 reduction catalysts by regulating Vo concentration.
✓ 已验证
产品关联
DOI
高影响因子
Biomaterials Advances
·
2025
·
IF 6
Shuting Peng,Lantao Wang,Zhengfeng Lu,Xinyi Yang,Yanxin Lu,Zhengxiao Wang,Qingxin Wu,Xiaofei Qin
The hypoxic, hyperglycemic, ischemic and inflammatory at the chronic diabetic wound microenvironment often leads to persistent oxidative stress and dysfunctional immune responses, as evidenced by hindrance of angiogenesis, neuropathy and impaired macrophage M2-type transition. In addition, bacterial infections lead to further exacerbation of chronic inflammatory responses, which severely impedes wound healing. In this study, hydroxypropyl chitosan (HCS) and 2,3,4-trihydroxybenzaldehyde (TBA) hydrogel was prepared via a one-step method, while Fe 3+ was used to initiate the in-situ oxidative polymerization of pyrrole (Py) in the hydrogel network, that conferred the HCS-TBA@Py hydrogel with excellent electrical conductivity. The outstanding physicochemical properties of the hydrogel, including swelling ability, injectability and electrosensitivity, confirmed its potential for applications in rapid filling of irregular wounds and strain sensors. Meanwhile, HCS-TBA@Py hydrogel can effectively scavenge reactive oxygen species and inhibit bacterial growth. More importantly, the combination of HCS-TBA@Py with electrical stimulation (ES) can effectively enhance the proliferation and migration of endothelial cells, promote axonal growth of nerve cells, rapid angiogenesis and accomplish the phagocytosis of M1 macrophages while realizing the M2 polarization of macrophages, comprehensively and systematically ameliorating the healing of diabetic wounds. This advanced study opens a meaningful way for chronic diabetic wound repair.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MATERIALS RESEARCH BULLETIN
·
2025
·
IF 5.7
Jian Zhou,Qiaojun Liu,Hangfei Zhang,Yan Kong,Yanhong Li,Kui Huang
Anion exchange membranes polypyrrole-modified(PPy-M), polypyrrole-graphene oxide-modified(PPy-GO-M), and polypyrrole-polyethyleneimine-graphene oxide-modified(PPy-PEI-GO-M) were synthesized using in situ polymerization for advanced desulfurization wastewater treatment and cathodic scaling inhibition in membrane electrolysis(ME). Characterization by SEM-EDX(scanning electron microscope-energy-dispersive X-ray spectroscopy), AFM(Atomic force microscopy), FT-IR(Fourier-transform micro-infrared spectrometer), XPS(X-ray photoelectron spectroscopy), and Raman spectroscopy revealed the membranes morphology and chemical properties, and their basic performances, including ion exchange capacity, water uptake, contact angle, zeta potential,perm-selectivity, and the membrane resistance, were rough analyzed. PPy-PEI-GO-M showed the best performance, with an ion exchange capacity of 2.57 mmol g -1 , contact angle of 85°, zeta potential of +15.59mV, membrane resistance of 6.97 Ω cm 2 , and perm-selectivity of 98%. Under optimal electrolysis conditions (ME time 180 min, temperature 30°C, current density 40 mA cm -2 , electrode spacing 4 cm), it achieved a Cl - removal rate of 96.83% without cathodic scaling, with treated effluent successfully reused in a flue gas desulfurization system. This modified membrane shows strong potential for water treatment applications.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2025
·
IF 5.6
Ziqiang Zhang,Shu Huang,Yuanming Wang,Fengquan She,Yulong Jiao,Xue Wang,Guohui Yuan
Inhibiting dendrite formation, hydrogen evolution, and anode corrosion is essential for durable aqueous Zn-ion batteries (AZIBs). Herein, we fabricated multifunctional hollow carbon nanofibers (HCNFs), which are employed as a shielding layer for the Zn anode (Zn@HCNF). The synergistic effect of N, O co-doping, which introduces zincophilic sites, and the unique 3D hierarchical porous architecture of the HCNFs coating, which provides hollow channels for low-tortuosity diffusion, results in facilitated ion transport, reduced interfacial impedance, and thus, remarkably improved reaction kinetics. Concurrently, the coating provides a uniform deposition space for Zn 2+ , inducing its crystallographic orientation toward the (002) crystal plane (with the texture coefficient increasing from 0.95 to 2.23 after 50 h of cycling). Its prominent hydrophobicity (with the electrode contact angle increasing from 76° to 135°) further suppresses hydrogen evolution and corrosion by blocking direct exposure of metallic zinc to reactive water molecules. Consequently, the Zn@HCNF symmetric cells exhibit a prolonged cycling lifespan of over 1500 h under an areal capacity of 2.5 mAh cm −2 , and over 1200 h at an ultrahigh current density of 20 mA cm −2 , outperforming most existing analogous 3D porous coated zinc anodes. The HCNF coating effectively tackles the key anode challenges, offering a promising strategy for advanced AZIBs.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2025
·
IF 5.6
Chengchen Tang,Chenhao Wang,Wei Wei,Kexin Chen,Zhenjie Zhang,Xiaoyan Wang,Hui Kong
Dynamic monitoring of psychological and physiological states is important for supporting mental health assessment. However, most existing sensors are invasive and lack real-time capabilities, limiting their practical application. Here, we present a wearable biosensing platform for non-invasive assessment of mental health—related biomarkers through sweat analysis. The device integrates a flexible skin interface with molecularly imprinted polymers for high molecular specificity and sweat-stimulation electrodes that induce perspiration under resting conditions. A spiral-shaped sweat collection system enables directional transport to sensing zones, allowing real-time quantification of tyrosine and tryptophan—two biomarkers associated with psychological states. A dopamine sensor was also incorporated, showing excellent electrochemical performance with a detection limit of 0.1 μM L⁻¹ in artificial sweat. Preliminary testing with collected sweat samples confirmed the feasibility of dopamine detection in real sweat. Given the low endogenous dopamine levels and individual variability, these results serve as proof-of-concept. The detection limits for tryptophan and tyrosine were both 1 μM L⁻¹, supporting the sensor’s sensitivity and applicability. Overall, this wearable platform demonstrates strong potential as an auxiliary tool for multi-biomarker monitoring to support mental health management in daily life.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2025
·
IF 5.4
Yusen Chen,Shuzhao Zhang,Xiongcheng Duan,Jia Liu,Hengye Li,Meijie Wei,Wei Wang
The rapid and efficient removal of radioiodine from water is a challenging and meaningful task to safeguard human health. Herein, two calix[4]pyrrole-based polymers were prepared through Mannich reaction between nitrogen-rich 2,4,6-tri(piperazin-1-yl)-1,3,5-triazine (TPT) and two configurational isomers of tetra- meso resorcinol-functionalized calix[4]pyrrole (2α2β-CP and 4α-CP), referred as 2α2β-CP-TPT and 4α-CP-TPT, respectively. The nitrogen contents of 2α,2β-CP-TPT and 4α-CP-TPT were as high as 15.11 % and 14.84 %, respectively. Accompanied by the bowl-shaped calix[4]pyrroles, the CP-TPTs showed high vapor iodine uptake, especially 4.82 g/g for 4α-CP-TPT. More importantly, the CP-TPTs exhibited rapid adsorption kinetics for capture iodine from aqueous phase, with the 2α,2β-CP-TPT at 1 mg/mL level showing a k 2 value as high as 7.374 × 10 −3 g/(mg min). In addition, high iodine adsorption capacity for 2α,2β-CP-TPT and 4α-CP-TPT were achieved to be 1989.6 and 2812.6 mg/g from water, respectively. Even more impressive was the removal efficiency above 98 % in flow-through applications even at flow rate as high as 10 mL/min and in simulated seawater conditions. The CP-TPTs could also exhibit high dynamic iodine adsorption capacity from water as well as excellent stability and outstanding reusability. Adsorption mechanism study discovered the foundational role of the charge transfer interaction on the excellent adsorption performance of the CP-TPTs. All these features demonstrated promising application prospects of the CP-TPTs for iodine removal from water.
✓ 已验证
产品关联
DOI
高影响因子
POLYMER
·
2025
·
IF 4.5
Hong Lei,Yang Qiu,Zhijuan Pan,Bin He,Tao Yan
The development of conductive polyester (PET) fibers is of great significance in increasing their added value and application in functional textiles. However, the continuous preparation of conductive PET fibers with high strength and durability is still a challenge. In this work, polypyrrole/waterborne polyurethane (PPy/WPU)/PET composite conductive fibers (PWPFs) were continuously prepared by in-situ polymerization of blended pyrrole (Py)/WPU. The study investigated the effects of alkali concentration and treatment time on the moisture regain rate of PET fibers to improve the hydrophilicity. The effects of polymerization cycles and mass fraction of WPU on the microstructure and electrical property of PWPFs were studied. The result demonstrated that the moisture regain of PET fibers increased from 0.45 % to 1.13 % when treated in a 50 g/L NaOH solution for 6 h. A stable composite structure of WPU/PPy was formed on the surface of conductive PET fibers, prepared with 5 polymerization cycles and a WPU mass fraction of 5 wt%, achieving a resistance of 58.41 kΩ/cm. The PPy/WPU composite conductive layer partially compensated for the mechanical properties lost by PET fibers during alkaline treatment. Notably, the abrasion resistance and washing resistance of PWPFs were excellent. The conductivity of PWPFs was highly correlated with the environmental humidity, temperature, salinity, and ultraviolet light irradiation and recoverable when environmental conditions underwent cyclic changes, which demonstrated that the PWPFs could be used for multi-functional sensing applications.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2025
·
IF 19
Dan Yang,Gongwei Tian,Jianhui Chen,Cuiyuan Liang,Shumin Niu,Yan Liu,Dianpeng Qi
Liquid metal (LM), with its excellent fluidity and electrical conductivity, holds great promise in the field of flexible electronics. However, its high surface tension and poor wettability pose challenges for patterning, limiting its integration and application potential. To overcome this, a novel microscale confined adhesion strategy is proposed that leverages adhesion differences across various surfaces to achieve precise LM patterning. The resulting 16-channel LM electrode array features fine resolution (150 µm), ultrahigh stretchability (up to 600% strain), and good durability (2 × 10 4 cycles at 100% strain). Moreover, the adhesion strength between the encapsulation layer and the substrate at recording sites is critical for maintaining electrode stability under mechanical stress. To enhance this adhesion, an encapsulation material named “BAE” is synthesized, in which disulfide bonds can react with thiol-modified substrates to improve interfacial adhesion strength (243 kPa, 2.3 times higher than the unmodified control) and mechanical stability. Additionally, polypyrrole is vapor-deposited onto BAE to enhance the signal transmission quality of the electrode and enable efficient coupling with electromyographic signals. The stretchable electrode array reliably records multi-channel electrophysiological signals under dynamic conditions and achieves 93% gesture recognition accuracy using deep learning, providing support for the development of health monitoring and intelligent control systems.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2025
·
IF 19
Kunzhang Xu,Yun Wang,Zhuoyuan Zhang,Xiufeng Li,Yuxiang Yi,Shizhou Lu,Bo Song
Increasing the vertical water supply height and effective evaporation area is crucial to designing high-performance 3D solar evaporators. To achieve the purpose, a teardrop-shaped 3D evaporator with multiple biomimetic water supply structures is developed. The teardrop-shaped configuration not only greatly increases the effective evaporation area but also significantly improves the environmental energy utilization efficiency. The cactus-inspired water supply channels at the bottom greatly increase the vertical water supply capacity, thereby providing a foundation for enlarging the effective evaporation area. Compared with the conical evaporator with the same height and projected area, the teardrop-shaped evaporator demonstrates 50% of reduction in water supply time and 40% of increase in effective evaporation area. Additionally, the top conical structure enables localized salt crystallization, thereby achieving stable and continuous long-term desalination and resource recovery without liquid discharge. The optimization of the water supply structure and hydrophilic coating is resulted in the impressive evaporation performance (3.73 kg m −2 h −1 ) and environmental energy efficiency (202.7%). The teardrop-shaped evaporator demonstrates excellent adaptability and durability in desalination and wastewater treatment, particularly in conditions involving high salinity and strong acids. Environmental and economic assessments reveal the good economic affordability and environmental friendliness of the teardrop-shaped evaporator.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Wanting Zhang,Jiawei Ruan,Xinzi Wu,Qian Liu,Kunchi Xie,Lifang Chen,Zhiwen Qi
The transformation of captured CO 2 into highly-valued dimethyl carbonate (DMC) is a promising approach for CO 2 capture and utilization. However, the direct synthesis of DMC from CO 2 and methanol is limited by high activation barrier derived from inert CO 2 and thermodynamic equilibrium constraints. Herein, three 1-butyl-1-methylpyrrolidinium (BMP)-based ionic liquid (ILs) with polar pyrrole, pyrazole, and 1,2,4-triazole (Tz) azole anions were designed to integrate CO 2 absorption and transformation into DMC. [BMP][Tz] exhibits a relatively high CO 2 uptake capacity of 0.6 mol·mol IL −1 and DMC yield reaches 12.2 % under mild reaction conditions of atmospheric temperature and pressure in 12 h. The reaction equilibrium thermodynamic model reveals that the process involves a combination of 1:1 and 2:1 stoichiometric reaction between [BMP][Tz] and CO 2 . Density functional theory calculations verify that [BMP][Tz] with increased absorption efficiency of azole anions promotes critical bond activation (particular C − O and O − H bonds), thereby enhancing catalytic efficiency. Besides, the reaction mechanism is clarified by the calculation of intermediates and transition state, wherein [BMP][Tz] can efficiently decrease the energy barrier of the rate-controlled step, which involves the insertion of CH 3 O − into CH 3 OCOO − species. Furthermore, polarity-induced phase separation of DMC from the IL phase to solvent phase favors DMC generation by breaking through the reaction equilibrium. The integration of CO 2 absorption-reaction-extraction based on basic and polar ILs, provides a promising approach for CO 2 capture and utilization.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Ghazala Maqsood,Muhammad Sohail Asghar,Bushra Shakoor,Muneerah Alomar,Muhammad Atif Ali,Yi E,Tao Mei,Muhammad Sultan Irshad,Xianbao Wang
Interfacial solar steam generation (ISSG) is severely limited by excessive salt accumulation and inefficient water movement. To overcome this, a hydratable skeleton is engineered through in-situ polymerization of polypyrrole (PPy) onto a NiMn-layered double hydroxide (LDH) for balanced water transport and effective salt-resistance without deterring the evaporation flux. The oxidation of Mn 2+ → Mn 3+ in the LDH matrix and shielding of PPy polymeric network (NiMn-LDH/PPy) endows stable, rapid hydration pathways for confined ion channels for salt rejection. The evaporator exhibits broadband light absorption (∼89 %), and achieves a high evaporation flux of 1.90 kg m −2 h −1 using seawater (3.5 wt%) under 1 kW m −2 solar intensity, maintained even after 20 cycles with greater flux retention. The hydratable skeleton's unique structure enables localized heat management (36.6 °C) and in-situ salt-ion dissociation (1.5 g NaCl completely rejected in 2 h), preventing crystallization. The structural optimization for effective heat mass transfer validates its structural stability under different humidity and environmental temperatures. The evaporation performance has been examined under natural conditions during different weather conditions, i.e., winter (1.76 kg m −2 h −1 ), and summer (1.82 kg m −2 h −1 ), in the same geographical location. This work provides a robust, process-engineered solution for durable solar desalination.
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
·
2025
·
IF 8.9
Fengdong Teng,Ying Yuan,Na Li,Shubin Song,Junrong Yu,Yan Wang,Zuming Hu
The synergistic integration of mechanical robustness with multifunctionality remains a critical challenge in flexible shielding materials. Here, a molecular engineering strategy using para -aramid (PPTA) prepolymers as reactive monomers in an NMP/CaCl 2 composite solvent system was introduced, through which high-molecular-weight PPTA (HMW-PPTA) solutions with an inherent viscosity of 4.1 dL·g −1 were synthesized via controlled secondary polymerization. Scalable blade-coating synergized with molecular assembly enabled rapid processing of these solutions into films exhibiting a tensile strength of 278.5 MPa, elongation at break of 14.3 %, and toughness of 23.5 MJ·m −3 . Hydrogen-bond-mediated in situ polymerization of conductive polypyrrole (PPy) on PPTA substrates yielded multifunctional PPTA-PPy (PAP) composite films. Dynamic interfacial interactions and nanoparticle-enabled defect repair synergistically enhanced the tensile strength and toughness of the optimized PAP (PAP-15) films to 311.4 MPa and 32.4 MJ·m −3 , respectively, alongside a high electrical conductivity of 1510 S·m −1 . Leveraging this conductivity, PAP-15 films achieve multifunctional integration, including 28.3 dB (8201 dB·cm 2 ·g −1 ) electromagnetic interference shielding effectiveness in the X-band, rapid Joule heating to 134 ℃ within 10 s at 5 V, and self-extinguishing behavior. This work establishes a universal platform for scalable production of high-performance PPTA-based flexible composites, overcoming traditional mechanical-functional trade-offs in shielding materials.
✓ 已验证
产品关联
DOI
高影响因子