APPLIED CATALYSIS A-GENERAL
·
2009
·Vol. 358
·期 2
·173-179
·
IF 3.19
Guan Huang,Shang-Yue Liu,Yong-An Guo,Ai-Ping Wang,Jin Luo,Chun-Cai Cai
The search for a reusable material as an efficient and economic catalyst for hydrocarbon oxidation is an important field of research. In this study, we investigated the highly effective combination of support and metalloporphyrin provided by manganese tetraphenylporphyrin adsorbed onto a precursor of freshly precipitated aluminium hydroxide, followed by conversion to a manganese porphyrin/boehmite compound. This was characterized using FT-IR, UV–vis spectroscopic techniques, N 2 BET analysis, X-ray powder diffraction, transmission electron micrograph technique and thermal analysis. Aerobic oxidation of cyclohexane has been investigated using the compound as a catalyst under mild conditions and in the absence of any solvent and reductant. The results indicate that it has higher catalytic activity than manganese tetraphenylporphyrin and the corresponding chitosan-supported catalyst. In particular, the catalyst exhibits good atom economy for cyclohexane oxidation, high catalyst turnover number, and good ketone and alcohol selectivity. In particular, it has excellent reusability, with no change in original catalytic activity; a quantity of catalyst containing only 1 mg of Mn TPP can be reused 8 times under the promotion of beomite (BM). In addition, we examined the reaction conditions for the use of such nanoparticle-supported manganese tetraphenylporphyrin as a mild and environmental friendly oxidation catalyst.
研究领域:
催化化学
·
纳米材料
·
绿色化学
·
有机氧化反应
·
多相催化
✓ 已验证
DOI
高影响因子
CATALYSIS TODAY
·
2018
·
IF 4.667
Dawang Chu,Chen Zhao
The effective and selective conversion of cellulose to valuable fuels and chemicals is highly attractive. In this paper, we prepared a catalyst with the adjacent surface Cu° and oxygen-deficient WO x (2 < x < 3) species by reduction of CuWO 4 precursor, and such catalyst coupled with Ni/activated carbon (AC) attained high yield (71 wt%) and good cycling performances in catalyzing one-step hydrothermal conversion of cellulose to ethylene glycol (EG), highly superior to the performances on physically mixed Ni/C, Cu/C and WO 3 . The increased Cu doping amounts led to a higher ratio of the lower valence state W (V or IV) to the high valence W(VI) as indicated by XPS, XRD, and TPR-H 2 analyses. The oxygen vacancies on the hydrogen-reduced CuWO 4 sample dramatically increased, probably due to the benefits from the substantial dissociated H• on the neighboring Cu° center. The EG yields from cellulose are shown to be proportional to the concentrations of oxygen vacancies on WO x , which catalyzes the important elementary retro-aldol step reaction via adsorbing C 6 sugar intermediates in a specific way. It is inferred that Cu introduction is mainly used to create more oxygen vacancies on the WO x surface that helps adsorbing oxygenates, while Ni fast hydrogenates of hydroxyacetaldehyde to EG and avoids coking, constructing a multi-functional synergistic catalytic process from converting of cellulose to EG in the high-temperature water
研究领域:
催化化学
·
生物质转化
·
绿色化学
·
材料化学
·
能源化学
✓ 已验证
DOI
高影响因子
BioEnergy Research
·
2015
·Vol. 8
·期 3
·1263-1274
·
IF 3.541
Zhang Zhi-bo,Lu Qiang,Ye Xiao-ning,Wang Ti-peng,Wang Xian-hua,Dong Chang-qing
Solid phosphoric acid (SPA) catalysts with different carriers were prepared and used for catalytic fast pyrolysis of poplar wood to produce levoglucosenone (LGO), a valuable anhydrosugar derivative that can be used in various organic synthesis applications. Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) experiments were performed to evaluate the catalytic capabilities of these catalysts under different reaction conditions. The results indicated that SPA catalyst prepared with the SBA-15 carrier exhibited the best catalytic capability for selectively producing LGO. Both the catalytic pyrolysis temperature and catalyst-to-biomass ratio affected the pyrolytic products greatly. The maximal LGO yield reached as high as 8.2 wt% from poplar wood, obtained at the pyrolysis temperature of 300 °C and the catalyst-to-biomass ratio of 1. The by-products during the catalytic pyrolysis process were mainly acetic acid (AA) and furfural (FF). In addition, the SPA catalyst possessed better catalytic capability than the liquid phosphoric acid (H 3 PO 4 ) catalyst to produce LGO.
研究领域:
生物能源
·
催化化学
·
生物质转化
·
热解化学
·
绿色化学
·
可再生资源利用
✓ 已验证
DOI
高影响因子
CHINESE CHEMICAL LETTERS
·
2011
·Vol. 23
·期 1
·29-32
·
IF 0.775
Wen Hui Zhong,Ying Na Cui,Shen Min Li,Ying Ping Jia,Jing Mei Yin
The carbonylation of phenyl bromide catalyzed by Co(OAc) 2 has been investigated with PhCOPh as a sensitizer under visible light in the presence of basic additive. With strong base CH 3 ONa, PhCOOCH 3 is produced in 70% yield with 100% selectivity , the similar results are also obtained with a stronger base (CH 3 ) 3 CONa. However, with another strong base NaOH, the yield of the ester is only 40%. On the other hand, with weak base NaOAc or ( n -C 4 H 9 ) 3 N, phenyl bromide cannot be carbonylated. The results of carbonylation of the six substituted phenyl bromides suggest that the activities of o , m , p -BrC 6 H 4 CH 3 are similar to phenyl bromide, while the activities of o , m , p -BrC 6 H 4 Cl are higher with the high yields (≥93%) of the corresponding chloro-esters. In addition, the relative position of bromine and chlorine or methyl on phenyl ring has little effect on the activity of the carbonylation .
研究领域:
有机化学
·
光催化
·
均相催化
·
反应机理
·
绿色化学
✓ 已验证
DOI
高影响因子
Science China-Materials
·
2018
·Vol. 61
·期 7
·1001-1006
·
IF 4.318
Zhang Guo-Qiang,Ou Wei,Xu Yang-Sen
氢能源是未来最理想的清洁能源, 可以利用太阳能和光催化材料分解水获得. 开发廉价、 资源丰富、 环境友好的光催化材料, 成为近年来能源和环境领域的研究热点. 基于此, 我们报道了一种新型有机光催化材料-不含金属的荧光素超分子纳米片, 其在可见光下显示出高效的光催化分解水产氢活性, 产氢速率接近341 μmol g −1 h −1 , 在420±10 nm的波段下表观量子效率达到1.2%. 这是荧光素超分子晶体首次被报道并应用于可见光下分解水产氢, 这一发现丰富了有机和超分子光催化剂的种类.
研究领域:
光催化
·
能源材料
·
超分子化学
·
清洁能源
·
光化学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2018
·
IF 6.735
Tianyu Guo,Xiaorong Nie,Jianping Du,Jinping Li
Methane oxidation is a strong exothermal reaction, the heat released from which can be utilized and the greenhouse effect caused by emitted methane, particularly low-concentration methane (LCM), can be further relieved. Presently, one of the key problems is to develop an efficient catalyst material for promoting LCM oxidation. Here, we synthesized an alumina with 2D feather-like lamella structure (FLAO), which is suitable for industrial applications. The samples were characterized by X-ray diffraction, scanning/transmission electron microscopy, X-ray photoelectron spectroscopy and nitrogen adsorption/desorption techniques. The results show that as-synthesized alumina has feather-shaped morphology and 2D slices structures, which form loose framework. Pd nanoparticles were easy to be anchored and well-dispersed on the surface of alumina. The FLAO-supported Pd catalysts exhibited high activity and stability. For 360000 mL g −1 h −1 space velocity, the LCM conversion research above 90% at 400 °C, and only decrease 8.6% after 50 h reaction at 450 °C, suggesting that as-synthesized 2D alumina slice has potential application for highly efficient removal of low-concentration methane from ventilation air.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2016
·Vol. 41
·期 15
·6362-6368
·
IF 3.205
Di-Chang Zhong,Yue-Lei Mao,Xin Tan,Ping Zhong,Liang-Xian Liu
Chemical hydrogen storage, endowed with superiorities of safety and efficiency, has been regarded as one of the most promising approaches. The design and synthesis of metallic catalytic system is an key step for development of chemical hydrogen storate materials. In this paper, we report that RhNi nanocatalyst, formed by spontaneously alloying of well-dispersed Rh and Ni NPs , exhibits much higher performance in the catalytic dehydrogenation of hydrous hydrazine.
研究领域:
材料化学
·
催化化学
·
纳米科学
·
能源化学
·
氢能源
✓ 已验证
DOI
高影响因子
Journal of Environmental Sciences
·
2017
·
IF 2.865
Yanfeng Wang,Wei Chen,Xiao Chen,Huajun Feng,Dongsheng Shen,Bin Huang,Yufeng Jia,Yuyang Zhou,Yuxiang Liang
CdS/MoS 2 , an extremely efficient photocatalyst , has been extensively used in hydrogen photoproduction and pollutant degradation . CdS/MoS 2 can be synthesized by a facile one-step hydrothermal process. However, the effect of the sulfur source on the synthesis of CdS/MoS 2 via one-step hydrothermal methods has seldom been investigated. We report herein a series of one-step hydrothermal preparations of CdS/MoS 2 using three different sulfur sources: thioacetamide, l -cysteine, and thiourea . The results revealed that the sulfur source strongly affected the crystallization, morphology, elemental composition and ultraviolet (UV)–visible-light-absorption ability of the CdS/MoS 2 . Among the investigated sulfur sources, thioacetamide provided the highest visible-light absorption ability for CdS/MoS 2 , with the smallest average particle size and largest surface area, resulting in the highest efficiency in Methylene Blue (MB) degradation. The photocatalytic activity of CdS/MoS 2 synthesized from the three sulfur sources can be arranged in the following order: thioacetamide > l -cysteine > thiourea . The reaction rate constants ( k ) for thioacetamide, l -cysteine, and thiourea were estimated to be 0.0197, 0.0140, and 0.0084 min −1 , respectively. However, thioacetamide may be limited in practical application in terms of its price and toxicity, while l -cysteine is relatively economical, less toxic and exhibited good photocatalytic degradation performance toward MB.
研究领域:
材料科学
·
环境化学
·
纳米催化
·
光催化
·
无机功能材料
·
能源材料
✓ 已验证
DOI
高影响因子
Progress in Natural Science-Materials International
·
2019
·Vol. 29
·期 4
·379-383
·
IF 3.31
Yongsheng Fu,Jun Li,Jianguo Li
The effect of CdS content on the photo-induced improvement of hydrogen evolution reaction activity of the Pt/CdS electrocatalyst was investigated. Although the electrons transferred from CdS to Pt in the Pt/CdS electrocatalyst increased with the CdS content under illumination, the electrochemical active surface area of the Pt/CdS electrocatalyst decreased with the CdS content, resulting that the photo-induced improvement of hydrogen evolution reaction activity of the Pt/CdS electrocatalyst decreased with the CdS content.
研究领域:
材料科学
·
催化化学
·
物理化学
·
纳米材料
·
能源化学
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2017
·Vol. 135
·期 13
·46036
·
IF 1.86
Yanfang Hu,Weiqian Ma,Meilin Tao,Xueyan Zhang,Xiaohong Wang,Xiaoyu Wang,Li Chen
Herein, we present a strategy for supporting bromine as a catalyst for the oxidation of sulfides. In this strategy, branched poly(ethylene imine) was first decorated by magnetic oxide and then used to support liquid bromine to obtain solid polymeric bromine (M@PEI@Br) nanoparticles. Compared with free bromine, the stability of the M@PEI@Br nanoparticles improved obviously. The oxidation of thioanisole to methyl phenyl sulfoxide was chosen as a reaction model to evaluate the catalytic activity of the M@PEI@Br nanoparticles. All of the obtained results verify that the M@PEI@Br nanoparticles exhibited excellent catalytic efficiency and could accelerate the oxidation process under solvent-free conditions at room temperature; this highlighted the potential of decorated polymers to support active and unstable small-molecule organic catalysts. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135 , 46036.
研究领域:
催化化学
·
高分子材料
·
纳米科技
·
有机合成
·
绿色化学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 79
·75359-75364
·
IF 3.289
Chunmei Li,Furen Zhang
A series of pyrrolo[2,3,4-kl]acridin-1-one derivatives were successfully synthesized from facile materials (enaminone and isatin) using a reusable solid acid as catalyst in water. A variety of structurally diverse enaminones and various isatins bearing different functional groups tolerated the reaction and gave the corresponding goal products with good to excellent yields. Advantages of this strategy include the mild conditions, operational simplicity, being convenient and environmentally benign, and the reusability of the heterogeneous catalyst. A mechanism was proposed to explain the formation of different substituted pyrrolo[2,3,4-kl]acridin-1-one derivatives.
研究领域:
有机化学
·
药物化学
·
绿色化学
·
杂环合成
·
催化化学
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2023
·
IF 7.2
Junfeng Wen,Yang Yu,Qijun Pei,Alexis Munyentwali,Teng He,Yunhua Xu,Ping Chen
Sodium phenoxide is considered as one of the potentially promising hydrogen storage materials due to its high hydrogen capacity and enhanced thermodynamic properties. However, efficient catalysts are needed to overcome kinetic barriers of the hydrogenation and dehydrogenation processes. In the present work, an ultrafine amorphous Ru–B alloy catalyst was synthesized by a solid-phase ball milling of RuCl 3 with NaBH 4 and subsequently tested for the hydrogenation of sodium phenoxide in an aqueous solution at room temperature . The conversion of phenoxide is significantly improved by 48.9 % on the Ru 3.9 B alloy catalyst compared with pristine Ru nanoparticles . Kinetic studies revealed that the hydrogenation of sodium phenoxide is of first-order with respect to H 2 pressure and zero-order to the concentration of sodium phenoxide over the Ru 3.9 B catalyst. Characterizations showed that the electronic structure of Ru is well modulated by B, leading to an electron-rich state of Ru. The highly active catalysis may be due to the fine dispersion, amorphous state, and electron-rich state of Ru in the ultrafine alloy.
研究领域:
材料化学
·
催化化学
·
氢能源存储
·
纳米催化
·
物理化学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）