Desalination and Water Treatment
·
2024
·
IF 1
Bo Zhu,Lingyu Zhou,Qi Zhang,Xiaodong Wang,Hongmei Jiang,Aimin Lu
A rigid Pb(II)-imprinted polymers were synthesized by the combination of surface-imprinted method with sol–gel method using (3-mercaptopropyl) trimethoxysilane as a functional monomer, Pb(II) and hexadecyltrimethylammonium bromide as template ions and tetraethoxysilane as cross-linker and were used as adsorbents for the removal of Pb(II). The effect of molar ratio of cross-linker to functional monomer on the morphology and adsorption performance has been evaluated. The effects of pH, initial concentration and adsorption time on the adsorption performance of Pb(II) on both sorbents were investigated. The maximum adsorption capacity calculated from Langmuir isotherm was 68.03 mg g -1 and 17.13 mg g -1 for Pb(II)-IIP and Pb(II)-NIP, respectively. Kinetics studies showed that the adsorption process obeyed the pseudo-second-order kinetic model. The selective adsorption coefficient of Pb(II)-IIP for Pb(II)/Ni(II), Pb(II)/Cd(II), Pb(II)/Hg(II) and Pb(II)/Co(II) are 117.5, 1.42, 4.9 and 30.24, respectively. The spent Pb(II)-IIP could be reused at least five cycles, demonstrating its good practicability.
研究领域:
环境化学
·
材料科学
·
分析化学
·
环境污染治理
·
功能高分子材料
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2016
·
IF 2.822
Fang Long,Jing Wang,Zhaohui Zhang,Liang Yan
A novel magnetic molecularly imprinted electrochemical sensor (MMIP-sensor) combined with magnetic molecularly imprinted solid-phase extraction (MMISPE) was constructed for rapid and sensitive detection of tetrabromobisphenol S (TBBPS) in water samples. The magnetic molecularly imprinted polymer based on magnetic graphene/multi-walled carbon nanotubes hybrid composite (MMIP/Gr-MWCNTs) was prepared as MMISPE sorbet to separate and enrich TBBPS from complex system. Adsorption results showed that the MMIP/Gr-MWCNTs possessed excellent selective adsorption toward TBBPS with a maximum adsorption capacity of 17.83 mg g − 1 . The magnetic imprinted sensor based on the magnetic Gr-MWCNTs composite modified electrode was prepared by electropolymerization of dopamine monomer . The high sensitivity of the MMIP-sensor was attributed to the large specific surface area and excellent electrical conductivity of the magnetic Gr-MWCNTs composites. The detection limit of the MIP-sensor toward TBBPS was calculated as 2.1 × 10 − 11 mol L − 1 (S/N = 3). Under the optimum conditions, the MISPE-MMIP-sensor combination system provided 10–12 fold preconcentration than that of MMIP-sensor alone determination. The MISPE-MMIP-sensor was successfully used for detection of TBBPS in drinking water , rain water , lake water and tap water with recoveries of 88.4–98.8%.
研究领域:
分析化学
·
环境监测
·
电化学传感
·
分子印迹技术
·
水处理
·
污染物检测
✓ 已验证
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 118
·97435-97445
·
IF 3.84
Yuling Cai,Liuchun Zheng,Zhanqiang Fang
To reduce costs and improve practicability, an ion imprinted magnetic chitosan (IMCS) was synthesized through co-precipitation using steel pickling waste liquor and chitosan and Cu(II) as template ions, which was then characterized by TEM, SEM, EDX, FTIR, XRD and VSM. The batch experiments were carried out for its potential application and high selectivity of Cu(II) removal, which were observed due to the paramagnetic properties and coordination reactions in the imprinted cavities. Kinetic studies revealed that the adsorption process followed a pseudo second-order model and the equilibrium data fit perfectly with the Langmuir isotherm model. The maximum adsorption capacity was 109.89 mg g−1. Negative values for ΔH0 and ΔG0 indicated an exothermic and spontaneous adsorption process. The adsorption process was found to be a chemical reaction and coordination complexes were formed between the metal ions and the groups of chitosan binding mainly in the “bridge model”. Moreover, 0.2 mol L−1 HCl solution was considered as the most appropriate eluent for regeneration. It showed a great performance in the experiments for practical copper wastewater and the process was considerably cost-effective.
研究领域:
环境化学
·
材料科学
·
污染控制工程
·
资源循环利用
·
吸附技术
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2018
·Vol. 136
·期 3
·46984
·
IF 1.901
Xiaojuan Liu,Fengjing Wu,Chaktong Au,Qi Tao,Mingyu Pi,Wenhui Zhang
Molecularly imprinted polymer (MIP) for selective extraction of p -hydroxybenzoic acid ( p -HB) was synthesized by suspension polymerization using p -HB as template, 4-vinyl pyridine as functional monomer and ethylene glycol dimethacrylate as crosslinker. As characterized by scanning electron microscopy, the MIP particles are spherical, with size ranging from 1 to 8 μm. Compared with the non-imprinted polymer (NIP), the MIP shows higher binding capacity toward p -HB: maximum binding capacity for p -HB being 8.07 μmol g −1 over MIP and 3.88 μmol g −1 over NIP. The adsorption of p -HB on MIP follows the Freundlich model and displays pseudo-second-order kinetics. The results of selective and competitive binding experiments confirm that the molecularly imprinted sites have excellent recognition ability toward p -HB. The results reveal that the MIP is a promising adsorbent for selective extraction of p -HB from water samples. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136 , 46984.
研究领域:
环境科学
·
分析化学
·
高分子材料
·
污染物去除
·
分子识别
✓ 已验证
DOI
高影响因子
JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS
·
2010
·Vol. 52
·期 4
·615-619
·
IF 2.453
Shenguang Ge,Mei Yan,Xiaoliang Cheng,Congcong Zhang,Jinghua Yu,Peini Zhao,Weiqiang Gao
A simple and convenient on-line molecular imprinted solid-phase extraction flow-injection fluorescence sensor was developed in this study. Florfenicol (FF)-imprinted polymer was prepared by self-assembly with acrylamide (AM) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linker. The binding characteristics of the imprinted polymer to florfenicol were evaluated by equilibrium binding experiments, and the morphology of the imprinted polymer was studied by scanning electron microscope (SEM). Fluorescence intensity of 3-p-nitrylphenyl-5-(2′-sulfonophenylazo) rhodanine (4NRASP) and bovine serum albumin (BSA) was inhibited by FF. Under optimum conditions the intensity of fluorescence shows a linear relationship with the concentration of FF over the range of 1.2 × 10 −6 to 2.6 × 10 −5 g mL −1 with a regression equation of Δ I = 23.54 + 17.86 c ( c 10 −6 g mL −1 ) ( r = 0.9965, n = 6). The low detection limit of FF was found to be 3.4 × 10 −7 g mL −1 according to 11 parallel determinations for the blank solution. The relative standard deviation for the determination of 2.0 × 10 −6 g mL −1 FF solution was 3.5% ( n = 11). This proposed sensor could be satisfactorily applied to the determination of FF in liver and meat samples.
研究领域:
分析化学
·
药物残留检测
·
食品安全
·
分子识别
·
环境监测
·
兽药代谢
✓ 已验证
DOI
高影响因子
RSC Advances
·
2012
·Vol. 2
·期 14
·5983-5989
·
IF 0
Hong-Wen Gao,Dong-Dong Ma,Gang Xu
Many kinds of medicinal plants are used in the treatment of disease, and a proportion of these plants grow tenaciously in soils contaminated with heavy metals. An example of one such medicinal plant is the herb Thlaspi rotundifolium L., which accumulates selenium (Se), and has anti-oxidation, anti-aging, anti-cancer and immunity-adjusting properties, but also simultaneously hyperaccumulates harmful metals such as Cd and Zn from the soil. An interesting model named ‘digging metals@plant then backfilling’ has been suggested, where the metals are removed from the plant by acid treatment, then the nano-pores imprinted with the heavy metals are backfilled from the drinking water. Experimental studies of this idea indicate that it can remove unwanted substances from the herb itself and also from the drinking water, ensuring the safety of the herb tea. Additionally, the Se normally embedded in the herb was not noticeably lost. Thus, this model provides a sustainable solution for the disposal of heavy metals using metal-accumulating plants.
研究领域:
植物生理学
·
环境毒理学
·
食品科学
·
天然药物化学
·
环境修复
·
生物医学工程
·
农业资源利用
✓ 已验证
DOI
International Journal of Electrochemical Science
·
2023
·Vol. 13
·期 12
·11953-11960
·
IF 1.5
Benzhi Liu,Jinlong Yan,Min Wang,Xiangyang Wu
Molecularly imprinted polymers were prepared on the surface of acrylamide-functionalized multi-walled carbon nanotubes by thermal polymerization, which using nonylphenol as template molecule, methacrylic acid as functional monomer and ethyleneglycol dimethacrylate as crosslinking agent. The molecularly imprinted polymers were modified on the surface of glassy carbon electrode to prepare electrochemical sensor. The proposed sensor showed a linear range of 0.1 to 30 μM with a detection limit of 0.02 μM. The sensor exhibited good stability, selectivity and high sensitivity to nonylphenol detection. It was successfully applied to detect nonylphenol in water samples.
研究领域:
分析化学
·
环境监测
·
材料科学
·
电化学
·
传感器技术
✓ 已验证
DOI
高影响因子
MONATSHEFTE FUR CHEMIE
·
2014
·Vol. 146
·期 3
·441-447
·
IF 1.347
Li Longfei,Chen Lin,Liu Weifeng,Yang Yongzhen,Liu Xuguang,Chen Yongkang
5-Fluorouracil surface-imprinted thermosensitive magnetic microspheres were prepared by using Fe 3 O 4 -encapsulating carbon microspheres as cores, N -isopropylacrylamide as thermosentitive monomer, ammonium persulfate as initiator, N , N ′-methylenebisacrylamide as crosslinker, and 5-fluorouracil as template molecule. The formation of these hybrid microspheres was verified by field emission scanning electron microscopy, transmission electron microscopy, Fourier transformation infrared spectroscopy, thermogravimetry, and dynamic light scattering. The results of the latter measurements show that the as-synthesized microspheres have a hydrodynamic diameter of 326 nm with the lower critical solution temperature of around 43 °C. The obtained microspheres are magnetic and show good potential for controlled loading and release of 5-fluorouracil. Graphical abstract
研究领域:
药剂学
·
纳米医学
·
肿瘤治疗
·
高分子材料科学
·
靶向给药系统
✓ 已验证
DOI
高影响因子
MARINE POLLUTION BULLETIN
·
2015
·Vol. 102
·期 1
·142-147
·
IF 2.991
Xiuping He,Xiaoqi Mei,Jiangtao Wang,Ziru Lian,Liju Tan,Wei Wu
An effective and highly selective molecularly imprinted material was prepared by suspension polymerization for the isolation and pre-concentration of synthetic estrogen diethylstilbestrol (DES) in seawater . The obtained MIPMs were proved to have more uniform size and porous structure, with maximum adsorption capacity of 8.43 mg g − 1 almost two times more than NIPMs (4.43 mg g − 1 ). The MIPMs showed no significant deterioration of the adsorption capacity after five rounds of regeneration. An off-line molecularly imprinted solid phase extraction (MISPE) method followed by HPLC–DAD was proposed for the detection of DES in seawater , and recoveries were satisfactorily higher than 77%. Four seawater samples in aquaculture area were analyzed and 0.61 ng mL − 1 DES was detected in one sample. The result demonstrated that this method can be used for the rapid separation and clean up of trace residual of DES in seawater.
研究领域:
环境分析化学
·
海洋环境污染
·
分子印迹技术
·
药物残留检测
·
水体污染物
✓ 已验证
DOI
高影响因子
Materials Science & Engineering C-Materials for Biological Applications
·
2016
·
IF 3.42
Jing Li,Sanming Li,Zhonggui He
In the present work, molecular imprinting silica xerogel (MISX) with selective recognition function aiming to regulate drug therapy was synthesized using biomimetic method with poly(ethyleneimine)s (PEIs) as the polymer template and levorotatory ofloxacin (LOFL) as recognition template. Ultraviolet spectroscopy wavelength scanning was used to test the removal process of LOFL, and characteristics of selective loading ofloxacin (OFL) into MISX were investigated using Fourier transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC). Molecular recognition functionality of MISX was intensively studied, including OFL loading and release. The results suggested that MISX possessed ability to recognize and selectively adsorb LOFL into MISX in OFL aqueous solution. Amorphous phase of adsorbed molecules contributed to molecular recognition because amorphous state increased the stability of LOFL that were selectively adsorbed into MISX, which induced stronger hydrogen bonding formed between LOFL and MISX so as to improve LOFL recognition ability. In vitro release revealed that OFL-MISX tablet initially released LOFL and later gradually OFL into dissolution medium. Thus conversion of drug release with different pharmacological activity had special value in delivering systems.
研究领域:
药剂学
·
药物化学
·
纳米医学
·
生物材料
·
分子识别
·
药物递送系统
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2018
·
IF 3.235
Yang Yuan,Jiaxin Wang,Xinjiong Ni,Yuhua Cao
A biosensor for determination of 3-chloro-1, 2-propandiol (3-MCPD) was developed based on the electrochemically catalytic reduction by hemoglobin (Hb). Hb was concentrated and immobilized with magnetic molecularly imprinted nanoparticles (MMIPs NPs). The MMIP NPs had a core-shell structure, with magnetic Fe 3 O 4 NPs as the core and SiO 2 as the shell. MMIPs NPs were modified on the surface of a magnetic electrode to constitute the Hb enzyme-like sensor. The biosensor could catalyze the electrochemical reduction of 3-MCPD, and a direct electrochemical determination of 3-MCPD could be achieved for the first time. The biosensor, where Hb immobilized with MMIPs NPs had high electrochemical response for 3-MCPD, increased by 37.5% compared with Hb immobilized with magnetic non-imprinted nanoparticle (MNIPs NPs). The biosensor increased the response by 19.56% again under an external magnetic field . The reduction peak current had a linear relationship with 3-MCPD concentration ranging from 1.0 mg·L −1 to 160 mg·L −1 with a detection limit (S/N = 3) of 0.25 mg·L −1 . The biosensor was applied to the determination of 3-MCPD in soy sauce samples successfully with recoveries between 97.4% and 99.6%.
研究领域:
生物传感器
·
分析化学
·
食品科学
·
电化学
·
分子生物学
·
纳米医学
✓ 已验证
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2017
·
IF 6.065
Jianxian Zeng,Zhihui Dong,Zhe Zhang,Yuan Liu
A surface-grafted imprinted ceramic membrane (IIP-PVI/CM) for recognizing molybdate (Mo(VI)) anion was prepared by surface-initiated graft-polymerization. Firstly, raw alumina ceramic membrane (CM) was deposited with SiO 2 active layer by situ hydrolysis deposition method. Subsequently, γ-methacryloxy propyl trimethoxyl silane (MPS) was used as a coupling agent to introduce double bonds onto the SiO 2 layer (MPS-CM). Then, 1-vinylimidazole (VI) was employed as a functional monomer to graft-polymerization onto the MPS-CM (PVI-CM). During the graft-polymerization, the influence factors of grafting degree of PVI were investigated in detail. Under optimum conditions (monomer concentration 20 wt%, temperature 70 °C, initiator amount 1.1 wt% and reaction time 8 h), the grafting degree of 20.39 g/100 g was obtained. Further, Mo(VI) anion was used as a template to imprint in the PVI-CM by employing 1,6-dibromohexane as a cross-linking agent, and then Mo(VI) was removed, obtaining the IIP-PVI/CM with many imprinted cavities for Mo(VI). Thereafter, static adsorption and dynamic separation properties of IIP-PVI/CM for Mo(VI) were studied. Results indicate that IIP-PVI/CM shows a specific selectivity for Mo(VI) with the adsorption capacity of 0.69 mmol/100 g, and the selectivity coefficient of IIP-PVI/CM is 7.48 for molybdate to tungstate anions. During the dynamic separation, IIP-PVI/CM has also good selectivity for separation of Mo(VI) and W(VI) anions.
研究领域:
环境化学
·
材料科学
·
分离科学
·
高分子化学
·
无机分析化学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）