Small
·
2024
·Vol. 20
·期 31
·2309034
·
IF 13
Sheng Wu,Binli Xiao,Dongliang Jiang,Yao Xiao,Peishan Shao,Zhiyao Zhou,Yinzhen Wang,Puxian Xiong
Mechanoluminescence (ML) materials are featured with the characteristic of “force to light” in response to external stimuli, which have made great progress in artificial intelligence and optical sensing. However, how to effectively enable ML in the material is a daunting challenge. Here, a Lu 3 Al 2 Ga 3 O 12 :Cr 3+ (LAGO: Cr 3+ ) near infrared (NIR) ML material peaked at 706 nm is reported, which successfully realizes the key to unlock ML by the lattice-engineering strategy Ga 3+ substitution for Al 3+ to “grow” oxygen vacancy (O v ) defects. Combined with thermoluminescence measurements, the observed ML is due to the formation of defect levels and the ML intensity is proportional to it. It is confirmed by X-ray photoelectron spectroscopy and electron paramagnetic resonance that such a process is dominated by O v , which plays a crucial role in turning on ML in this compound. In addition, potential ML emissions from 4 T 2 and 2 E level transitions are discussed from both experimental and theoretical aspects. This study reveals the mechanism of the change in ML behavior after cation substitution, and it may have important implications for the practical application of O v defect-regulated turn-on of ML.
研究领域:
材料科学
·
凝聚态物理
·
光学功能材料
·
缺陷化学
·
传感技术
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2022
·Vol. 49
·期 7
·10273-10279
·
IF 5.532
Daiyuan Liu,Ting Wang,Yichun Liu,Chao Wang,Zhichao Liu,Xiaodie Zhu,Ya Liu,Jian Zhang,Zhaowei Teng,Yang Zhong,Yakovlev Alexey Nikolaevich,Xuhui Xu
The photoluminescence behavior of inorganic phosphors is generally influenced by thermal stability, which determines the luminescence efficiency of the corresponding devices. Here, a series of Eu 2+ , Mn 2+ co-doped LiAl 5 O 8 blue-green-emitting phosphors with thermal robust are successfully fabricated. The concentration-dependent emission spectra and the decay curves of the as-obtained LiAl 5 O 8 : Eu 2+ , Mn 2+ samples manifest the occurrence of the energy transfer from Eu 2+ to Mn 2+ ions via dipole-dipole interaction, and the corresponding emitted colors are gradually modulated from blue to green under the excitation of 310 nm. Moreover, the zero-thermal-quenching luminescence is observed when the operation temperature is up to 423 K, which is attributed to the energy release from the trapping centers to emitting centers (Eu 2+ and Mn 2+ ) at high temperature. Furthermore, a warm white light-emitting diodes (WLEDs) device with correlated color temperature of 5061 K, a color rendering index of 80.6 and long-term stability is fabricated by combining UV LED chip (λ ex = 310 nm), as-obtained LiAl 5 O 8 : Eu 2+ , Mn 2+ phosphor, commercially available red phosphor and green phosphor. These results prove the potential application of the as-obtained LiAl 5 O 8 : Eu 2+ , Mn 2+ phosphor for UV-pumped WLEDs devices.
研究领域:
材料科学
·
发光材料
·
固态化学
·
光电子学
·
无机化学
·
器件物理
·
纳米材料
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2016
·Vol. 133
·期 17
·
IF 1.866
Ruiqing Hu,Yuping Pi,Na Wang,Qian Zhang,Jinqi Feng,Weilin Xu,Xia Dong,Dujin Wang,Hongjun Yang
Biodegradable polymers have received increased attention due to their potential application in the medicine and food industries; in particular, poly(lactic acid) (PLA) is a primary biopolymer because of its excellent biocompatibility and absorbability features. In this study, a porous PLA membrane was fabricated by phase separation using water microdroplets produced by an ultrasonic atomizer as a coagulation bath. The formation of S-type clusters was attributed to the slow exchange rate between solvent and coagulant, which provided time for the movement of polymer molecules. The effect of preparation conditions on the structure of S-type clusters, including polymer concentration in solution and ambient temperature was investigated. The PLA porous membrane prepared from water micro-droplets with different morphology compared with the sample fabricated from distilled water has potential application in fields of tissue engineering and artificial organ generation. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133 , 43355.
研究领域:
生物材料学
·
高分子科学
·
组织工程
·
再生医学
·
纳米结构制备
·
相变动力学
✓ 已验证
DOI
高影响因子
POWDER TECHNOLOGY
·
2024
·
IF 4.5
Huifeng Xu,Pengfei Wang,Saiwei Luan,Lixia Cheng,Zhenxiao Fu,Xiuhua Cao,Lei Zhang,Shuhui Yu,Rong Sun
Conventionally, tetragonality in BaTiO 3 powder is attributed to grain size, disregarding the role of Ba/Ti ratio. However, our study reveals a significant impact of Ba/Ti ratio on tetragonality in BaTiO 3 . With an increase in Ba/Ti ratio from 0.990 to 1.010, particle size remains around 200 nm. Tetragonality initially rises from 1.006 to a maximum of 1.0092 at Ba/Ti = 1.000, then decreases to 1.005. Lower tetragonality is associated with Ba or Ti vacancies, using density functional theory (DFT), we analyzed the electron density and lattice distinction in BaTiO 3 powders. Both Ba and Ti vacancies affect lattice distortion, the Ti vacancies leading to more significant lattice expansion and lower tetragonality than Ba vacancies. Using this powder, we fabricated high-density BaTiO 3 ceramics and multi-layer ceramics capacitors (MLCCs) with X7R temperature stability (−55 to 125 °C, ±15% coefficient) and excellent reliability. This strategy has broad implications for tetragonal BaTiO 3 nanopowders and MLCCs development.
研究领域:
材料科学
·
无机非金属材料
·
电子陶瓷
·
固态化学
·
功能材料
✓ 已验证
DOI
高影响因子
DALTON TRANSACTIONS
·
2022
·Vol. 51
·期 45
·17328-17337
·
IF 4.569
Yan Zhu,Hongmei Qing,Wenbo Dong,Mingrong Dong,Tao Shen,Jian Cui
Copper zinc tin sulfide (Cu2ZnSnS4, CZTS) is attracting interest in photovoltaic applications due to its proper band gap, low cost and low toxicity. It has been found that two phases can be fabricated, i.e. kesterite and wurtzite CZTS structures. Though kesterite CZTS is proven to be thermodynamically stable, the free energy difference between kesterite and wurtzite CZTS is rather small. So, wurtzite CZTS can also stably exist under ambient conditions. Controlling the phase formation can expand the dimensions to optimize the performance of applications based on CZTS. In this study, we found that phase control can be achieved by simply using a mixed solvent of ethylene glycol and triethylenetetramine (TETA) in a two-stage heating process. It is found that the incorporation of the reductive solvent of TETA during the 1st heating process converts the phase of the precipitates from CuS (TETA poor) to Cu7S4 (TETA rich). In the subsequent 2nd heating stage, the phase of the final products is determined to be kesterite CZTS originating from CuS and wurtzite CZTS from Cu7S4, respectively. Thus, the key to control the phases of the final products is to control the chemical environment of Cu under Cu1+-rich or Cu2+-rich conditions in the fabrication process, which corresponds to the phase of the final products of wurtzite CZTS or kesterite CZTS, respectively. This summarized principle can not only be used to explain the previous versatile experimental results but also to guide the controlled synthesis of various phases of CZTS and CZTS-like materials in applications.
研究领域:
材料科学
·
无机化学
·
半导体材料
·
纳米科技
·
光伏材料
✓ 已验证
DOI
高影响因子
Small Methods
·
2018
·Vol. 2
·期 6
·1800017
·
IF 0
Pingan Zhu,Tiantian Kong,Chunmei Zhou,Leyan Lei,Liqiu Wang
Natural systems have exceptional capabilities of constructing structures across multiple length scales for remarkable performances from limited choices of building blocks. However, simultaneous control over structures at both the macroscopic and microscopic length scales is restricted by the high requirements in the type and property of building blocks. Here, directed self-assembly of microdroplets in an evaporating liquid is harnessed to fabricate large-scale ordered films with precisely controlled microstructures. Evaporation-induced variations in liquid confinement allow microdroplets to reassemble for large-scale ordered patterns. Deformation of microdroplets into different shapes accurately defines multiple topographical structures at the microdroplet level. The fabrication process is facile and scalable, and works with various materials for manufacturing functional films with tunable properties. These results suggest a facile yet effective strategy for engineering microstructures by combining directed self-assembly with manipulation of the property of building components for both structural fidelity and diversity.
研究领域:
材料科学
·
纳米科技
·
软物质物理
·
表面科学
·
功能薄膜
✓ 已验证
DOI
MACROMOLECULAR RAPID COMMUNICATIONS
·
2017
·Vol. 38
·期 4
·1600551
·
IF 4.265
Shi-Lei Dong,Lu Han,Cai-Xia Du,Xiao-Yu Wang,Lu-Hai Li,Yen Wei
Electroactive hydrogel scaffolds are fabricated by the 3D-printing technique using composites of 30% Pluronic F127 and aniline tetramer-grafted-polyethylenimine (AT-PEI) copolymers with various contents from 2.5% to 10%. The synthesized AT-PEI copolymers can self-assemble into nanoparticles with the diameter of ≈50 nm and display excellent electroactivity due to AT conjugation. The copolymers are then homogeneously distributed into 30% Pluronic F127 solution by virtue of the thermosensitivity of F127, denoted as F/AT-PEI composites. Macroscopic photographs of latticed scaffolds elucidate their excellent printability of F/AT-PEI hydrogels for the 3D-printing technique. The conductivities of the printed F/AT-PEI scaffolds are all higher than 2.0 × 10 −3 S cm −1 , which are significantly improved compared with that of F127 scaffold with only 0.94 × 10 −3 S cm −1 . Thus, the F/AT-PEI scaffolds can be considered as candidates for application in electrical stimulation of tissue regeneration such as repair of muscle and cardiac nerve tissue.
研究领域:
生物材料
·
组织工程
·
再生医学
·
高分子化学
·
生物医学工程
✓ 已验证
DOI
高影响因子
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
·
2013
·Vol. 101
·期 8
·1359-1366
·
IF 2.308
Yu-fei Wang,Hong-feng Guo,Da-jun Ying
Dural closure after the neurosurgery can prevent postoperative complications. Although many types of dural substitute have been developed, most of them lack functional and structural characteristics compared with the natural dura mater. In this study, we used electrospinning method to fabricate a multilayer scaffold to promote dural repair. The inner layer of the scaffold that faces the brain tissue is composed of poly-lactic acid (PLA) to reduce tissue adhesion. The middle layer of the scaffold is composed of poly-ɛ-caprolactone and PLA, which provides a watertight seal. The outer layer of the scaffold contains a large amount of collagen to promote cell attachment and proliferation. The results from in vitro study and an animal model have shown that this multilayer fibrous scaffold has sufficient mechanic strength and biochemical properties to enhance dural repair. Therefore, fabrication of scaffold with multiple functional and structural layers may provide a novel approach for tissue engineering. © 2013 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 101B: 1359–1366, 2013.
研究领域:
生物材料
·
神经外科
·
组织工程
·
再生医学
·
生物医学工程
✓ 已验证
DOI
高影响因子
Small
·
2024
·Vol. 20
·期 26
·2310387
·
IF 13
Wei Luo,Yanli Yu,Yucheng Wu,Wenbin Wang,Yimin Jiang,Wei Shen,Rongxing He,Wei Su,Ming Li
Rational design of heterostructure catalysts through phase engineering strategy plays a critical role in heightening the electrocatalytic performance of catalysts. Herein, a novel amorphous/crystalline (a/c) heterostructure (a-CoS/Ni 3 S 2 ) is manufactured by a facile hydrothermal sulfurization method. Strikingly, the interface coupling between amorphous phase (a-CoS) and crystalline phase (Ni 3 S 2 ) in a-CoS/Ni 3 S 2 is much stronger than that between crystalline phase (c-CoS) and crystalline phase (Ni 3 S 2 ) in crystalline/crystalline (c/c) heterostructure (c-CoS/Ni 3 S 2 ) as control sample, which makes the meta-stable amorphous structure more stable. Meanwhile, a-CoS/Ni 3 S 2 has more S vacancies (S v ) than c-CoS/Ni 3 S 2 because of the presence of an amorphous phase. Eventually, for the oxygen evolution reaction (OER), the a-CoS/Ni 3 S 2 exhibits a significantly lower overpotential of 192 mV at 10 mA cm −2 compared to the c-CoS/Ni 3 S 2 (242 mV). An exceptionally low cell voltage of 1.51 V is required to achieve a current density of 50 mA cm −2 for overall water splitting in the assembled cell (a-CoS/Ni 3 S 2 || Pt/C). Theoretical calculations reveal that more charges transfer from a-CoS to Ni 3 S 2 in a-CoS/Ni 3 S 2 than in c-CoS/Ni 3 S 2 , which promotes the enhancement of OER activity. This work will bring into play a fabrication strategy of a/c catalysts and the understanding of the catalytic mechanism of a/c heterostructures.
研究领域:
材料科学
·
电化学
·
催化化学
·
纳米材料
·
能源材料
✓ 已验证
DOI
高影响因子
Energy Technology
·
2022
·Vol. 10
·期 12
·2200983
·
IF 4.149
Hongxi Shi,Lei Zhang,Hao Huang,Yali Ou,Xiaoting Wang,Ziyu Li,Dan Chi,Shihua Huang
Two-dimensional perovskite materials attract great attentions for the application of perovskite solar cells (PSCs) due to the regulable bandgap and high stability. However, the power conversion efficiency (PCE) of 2D PSCs is far behind in that of three-dimensional PSCs. Herein, Dion–Jacobson (DJ) phase Pb–Sn perovskite of (PhDMA)MA 4 (Pb 0.5 Sn 0.5 ) 5 I 16 in 2D PSCs is introduced, which has suitable bandgap of 1.27 eV and offers the candidate for the absorber of bottom device in all perovskite tandem solar cells. The nonlinear bandgap behavior of 2D Pb–Sn perovskite materials is certified by adjusting the recipe of precursors to vary the bandgap of perovskite films. Moreover, MACl is employed to improve the film quality of 2D Pb–Sn perovskite, leading to the suppression of the defect density and nonradiative recombination for 2D PSCs. As a result, a high PCE of 12.2% is achieved for DJ phase 2D Pb–Sn PSCs.
研究领域:
材料科学
·
光伏技术
·
纳米材料
·
能源化学
·
半导体器件
✓ 已验证
DOI
高影响因子
FUEL
·
2023
·
IF 7.4
Muhammad Yousaf,Yuzheng Lu,Majid Niaz Akhtar,Ali Sarosh Khawaja,Khalid Mujasam Batoo,Sajjad Hussain,Asma Noor,Muhammad Akbar,Hu Enyi,M.A.K Yousaf Shah,Naveed Mushtaq,Bin Zhu
Lattice defects in rare earth (RE) doped single-phase semiconductor materials play a key role in structural modifications and physicochemical characteristics, resulting to enhance the ionic conductivity. In this work, we synthesized lanthanum doped samarium oxide with different mole ratios and applied it as a ceramics membrane fuel cell device to enable high peak power density (PPD) at low operational temperatures (520–400 °C). The samples are capable of triple charge H + /O 2− /e − conduction and enhance the catalytic function of the cell in terms of HOR and ORR kinetics by producing lattice defects. The fabricated Sm 1.5 La 1.5 Fe 5 O 12 (2-SLFO) fuel cell device exhibits a high OCV of 1.13 V with a maximum PPD of 864.26 mW/cm 2 at 520 °C. Durability measurement verifies that 2-SLFO-based fuel cell device can be worked for 60 h under fuel cell conditions (H 2 /air) at 520 °C. The first principle calculations using density functional theory (DFT) demonstrate that the higher oxygen vacancy concentration in the 2-SLFO sample may cause to the higher charge-transfer kinetics, subsequent in the enhancement of ions transportation of the fabricated fuel cell device.
研究领域:
材料科学
·
电化学
·
能源材料
·
固态离子学
·
燃料电池技术
✓ 已验证
DOI
高影响因子
SOLID STATE SCIENCES
·
2024
·
IF 3.4
Kaiwu Fu,Dandan Ma,Nan Zhang,Jiacheng Cao,Xiaonan Chen,Min Zhu,Peiqing La
Oxide thermoelectric materials have a wide range of applications due to their excellent stability, low cost, and non-toxic properties. However, their low thermoelectric conversion efficiency limits their practical use. Therefore, improving the performance of oxide thermoelectric materials has become the focus of current research. Interface engineering is an important approach to enhance thermoelectric properties by optimizing electrical transport properties through multiphase composite regulation of phase interface structure. A series of Sr 0.6 La 0.4 Nb 2 O 6-δ /x wt% graphite (x = 0, 0.6, 1.0, 1.5, 2.0) composite ceramics thermoelectric materials were prepared, and the mechanism for improving their thermoelectric properties was explored. Graphite serves as an electron momentum amplifier within the Sr 0.6 Ba 0.4 Nb 2 O 6-δ matrix, thereby augmenting both conductivity and power factor values significantly. Notably, the incorporation of 1.5 wt% graphite led to a remarkable enhancement in the thermoelectric power factor at 1073 K, reaching an impressive value of 254.84 μW/K 2 m - representing a notable increase of approximately 51 % compared to the unmodified sample - primarily attributed to the elevated electrical conductivity .
研究领域:
材料科学
·
无机非金属材料
·
热电转换
·
固态物理
·
功能陶瓷
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）