JOURNAL OF MEMBRANE SCIENCE
·
2018
·
IF 6.578
Jianfeng Li,Shujuan Guo,Zhaozan Xu,Jianguo Li,Zihe Pan,Zhiping Du,Fangqin Cheng
In order to reduce the wetting and fouling propensity of polyvinylidene fluoride (PVDF) membrane during coking wastewater treatment by membrane distillation, two kinds of omniphobic PVDF composite membranes were prepared by coating SiO 2 nanoparticles on PVDF membrane surface via electrostatic adsorption or chemical bonding respectively, and subsequently fluorination. The coated SiO 2 nanoparticles observed as amounts of nano-scale protrusions by scanning electron microscope constructed a re-entrant structure and enhanced membrane surface roughness . The omniphobicity of the modified membranes was confirmed by high contact angles (> 150°) for water, diiodomethane and ethylene glycol on the membrane surface. The omniphobic layer with SiO 2 nanoparticles coated via chemical bonding was more stable than electrostatic adsorption. Both the omniphobic PVDF membranes exhibited stable and high rejections of the inorganic and organic contaminants, which were determined by conductivity, total organic carbon and three-dimensional excitation-emission fluorescence spectroscopy of the distillate. The modified omniphobic membranes also showed much less flux decline than the pristine PVDF membrane in direct contact membrane distillation tests (120 h), suggesting their excellent anti-fouling performance. This study indicates that coating silica nanoparticles via chemical bonding is an effective and promising method to fabricate omniphobic PVDF membrane for coking wastewater treatment.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2018
·
IF 2.829
Yueyun Fang,Qizhang Huang,Pengyi Liu,Jifu Shi,Gang Xu
This study demonstrated high-efficient dye adsorption for wastewater using MoS 2 -glue sponge as an easy-separative and regenerative adsorbent. Flower-like molybdenum disulfide (MoS 2 ) nanopowders with rich polar edge sites were firstly synthesized by a facile one-pot hydrothermal method . Chemical and morphological features of MoS 2 nanoflowers were then examined by XRD , XPS , SEM and TEM . Afterwards, different concentrations of the MoS 2 -glue sponges with easy separability were successfully fabricated by a convenient two-step dip-coating method. The adsorption performance was estimated by the removal of Rhodamine B (RhB) dyes. The results proved that the maximum adsorption capacity of MoS 2 -glue sponge was 127.39 mg RhB/g product in 60 min. The RhB uptake behaviors can be well described by the Sips isotherm model and pseudo-second-order kinetic model , indicating a multilayer and chemical adsorption process. The adsorption mechanism proposed that the zwitterionic RhB molecules in aqueous solution would aggregate on the surface of negative charged MoS 2 in a head-to-tail way through electrostatic interaction . Furthermore, RhB dyes could desorb easily from MoS 2 -glue sponges when changing the polarity of solvent and the reusability experiment showed that the MoS 2 -3% glue sponge could be reused for 15 times with above 85.8% of the adsorption capacity retained. Thus, the novel MoS 2 -glue sponge is considered as a competitive adsorbent for treatment of dyestuff waste water.
研究领域:
环境科学
·
材料科学
·
纳米技术
·
化学工程
·
水污染控制
✓ 已验证
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 118
·97435-97445
·
IF 3.84
Yuling Cai,Liuchun Zheng,Zhanqiang Fang
To reduce costs and improve practicability, an ion imprinted magnetic chitosan (IMCS) was synthesized through co-precipitation using steel pickling waste liquor and chitosan and Cu(II) as template ions, which was then characterized by TEM, SEM, EDX, FTIR, XRD and VSM. The batch experiments were carried out for its potential application and high selectivity of Cu(II) removal, which were observed due to the paramagnetic properties and coordination reactions in the imprinted cavities. Kinetic studies revealed that the adsorption process followed a pseudo second-order model and the equilibrium data fit perfectly with the Langmuir isotherm model. The maximum adsorption capacity was 109.89 mg g−1. Negative values for ΔH0 and ΔG0 indicated an exothermic and spontaneous adsorption process. The adsorption process was found to be a chemical reaction and coordination complexes were formed between the metal ions and the groups of chitosan binding mainly in the “bridge model”. Moreover, 0.2 mol L−1 HCl solution was considered as the most appropriate eluent for regeneration. It showed a great performance in the experiments for practical copper wastewater and the process was considerably cost-effective.
研究领域:
环境化学
·
材料科学
·
污染控制工程
·
资源循环利用
·
吸附技术
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Zhi Song,Yu-Long Ma,Cong-Er Li
Tetracycline (TC), a major pollutant in water, has an adverse effect on ecosystem and human health. Thus, it is urgent to remove but still remains a challenging. In this work, a new adsorbent of MnO 2 decorated on sodium hypochlorite treated expanded graphite (MnO 2 /TEG) was developed by an in situ hydrothermal method, which exhibited a highly removal rate of 99.2% to pharmaceutical wastewater treated by flocculation. The structure and morphology of the adsorbent was studied by detailed physical characterization. Meanwhile, the main influencing factors on the adsorption behavior such as pH value, concentration, temperature of the solution, adsorption time, metal oxide species and MnO 2 loading amount were also investigated in detail. It was found that the electrostatic adsorption between Mn 4+ in MnO 2 /TEG and dimethylamino groups in TC molecules played an important role during the adsorption process. These excellent properties proved that the novel composite could be applied to remove TC residues in pharmaceutical wastewater.
研究领域:
环境科学
·
水处理技术
·
材料科学
·
环境污染与控制
·
药物残留去除
✓ 已验证
DOI
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2022
·
IF 6.449
Zhi Liu,Xiaohai Huang,Yi Miao,Bing Gao,Yiling Shi,Jianghui Zhao,Soon Huat Tan
Adsorption techniques have been successfully applied in water purification for their simplicity, efficiency, and negligible byproducts. Porous carbon materials are effective dye adsorbents but have relatively low adsorption efficiency, slow adsorption rate, and high production cost, all of which need to be addressed for conducive practical applications. Herein, natural eggplant-based porous carbon materials (EPCMs) have been studied and successfully constructed to perform with high efficiency and fast rate of removal of dyes from wastewater. The hierarchical pore structure and well-developed mesoporous had a total pore volume of 0.6379 cm 3 /g and a maximum specific surface area of 516.0060 m 2 /g, which contributed to the high efficiency of adsorption (100%). The complete adsorption of Rhodamine B (basic and cationic dyes) solution within 25 min demonstrated its fast and high adsorption performance. The EPCMs also showed its efficiency in the absorption of various dyes, including methyl orange (acidic and anionic dye), methylene blue (basic and cationic dyes), and Yuan’qing B (reactive dye). Furthermore, the EPCMs were tested with actual wastewater from a production-based factory and recorded excellent removal effects as well, suggesting its prospective expansion for industrial applications. Therefore, this eggplant biomass-based porous carbon provides a promising approach for fast and highly efficient wastewater purification from dye-based contaminations.
研究领域:
环境科学
·
材料科学
·
化学工程
·
环境污染治理
·
吸附技术
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2015
·Vol. 132
·期 17
·
IF 1.768
Ronglan Wu,Lingyuan Tian,Wei Wang,Xiaolin Man
In this article, we report a study of the design and synthesis of a bifunctional cellulose derivative on the removal of phenols and heavy-metal ions in wastewater treatment. A radical polymerization was performed in an ionic liquid, 1-allyl-3-methylimidazolium chloride, to graft two monomers, butyl methacrylate and 4-vinyl pyridine, on the backbone of cellulose. The effects of the five reaction conditions on the yield of final products were evaluated. The grafted celluloses were characterized by means of Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. Adsorption experiments were carried out on the cellulose- g -poly(butyl methacrylate- co -4-vinyl pyridine) to evaluate the capacity of the removal of 2,4-dichlorophenol (2,4-DCP) and Cu(II) in water. The adsorption isotherms were measured at five temperatures and interpreted by a Langmuir model of adsorption. The thermodynamics of the adsorption suggested that the binding process was mildly exothermic for Cu(II) and endothermic for 2,4-DCP. Kinetic studies were interpreted with a pseudo-second-order adsorption model. The process of the adsorption of 2,4-DCP could be described overall by the model, whereas the adsorption of Cu(II) involved two processes. This was due to adsorption both on the surface and inside the adsorbent. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132 , 41830.
研究领域:
环境化学
·
高分子材料科学
·
水处理技术
·
吸附分离
·
绿色化学
✓ 已验证
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2021
·Vol. 9
·期 4
·105455
·
IF 5.909
Shuli Chen,Yongliang Zheng,Chenyang Han,Haoqun Liu,Yi Chen,Jiangang Zhou,Sun Su
Old polyester fibre (OPF) was used for the first reported microbial flocculant (MBF) production by Diaphorobacter nitroreducens R9. Pretreatment of OPF was performed by different bases individually. The optimal pretreatment conditions were determined by total organic carbon (TOC) content of hydrolysate supernatants. Although all alkaline OPF-hydrolysate culture media were investigated for MBF production, KOH hydrolysate produced the highest yield. The influence of KOH OPF-hydrolysate culture condition factors were applied throughout the response surface methodology , and the optimal conditions with the maximum MBF yield (4.02 g/L) were 33.5 °C, pH 9.5, and hydrolysate TOC (4.416 g/L). Furthermore, the MBF was applied to treat polyester alkali-peeling wastewater (PAPW) for the first time, and the highest removal efficiency was achieved when 1.0 g/L MBF was added to PAPW. In general, this contribution reveals that KOH OPF-hydrolysate could be used as a potential inexpensive carbon source for production of MBF by sustainable processes that could reduce environmental pollution .
研究领域:
环境微生物学
·
环境工程
·
生物材料
·
废水处理
·
可持续生物技术
✓ 已验证
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2017
·
IF 6.065
Li Fang,Liang Li,Zan Qu,Haomiao Xu,Jianfang Xu,Naiqiang Yan
A novel method was developed and applied for the treatment of simulated wastewater containing multiple heavy metals. A sorbent of ZnS nanocrystals (NCs) was synthesized and showed extraordinary performance for the removal of Hg 2+ , Cu 2+ , Pb 2+ and Cd 2+ . The removal efficiencies of Hg 2+ , Cu 2+ , Pb 2+ and Cd 2+ were 99.9%, 99.9%, 90.8% and 66.3%, respectively. Meanwhile, it was determined that solubility product ( K sp ) of heavy metal sulfides was closely related to adsorption selectivity of various heavy metals on the sorbent. The removal efficiency of Hg 2+ was higher than that of Cd 2+ , while the K sp of HgS was lower than that of CdS. It indicated that preferential adsorption of heavy metals occurred when the K sp of the heavy metal sulfide was lower. In addition, the differences in the K sp of heavy metal sulfides allowed for the exchange of heavy metals, indicating the potential application for the sequential removal and separation of heavy metals from wastewater. According to the cumulative adsorption experimental results, multiple heavy metals were sequentially adsorbed and separated from the simulated wastewater in the order of the K sp of their sulfides. This method holds the promise of sequentially removing and separating multiple heavy metals from wastewater.
研究领域:
环境科学
·
环境工程
·
纳米材料
·
水污染控制
·
化学工程
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 86
·83288-83295
·
IF 3.289
Chongmin Liu,Shuai Liu,Pingxiao Wu,Yaping Dai,Lytuong Tran,Nengwu Zhu,Chuling Guo,Ihsanullah Sohoo
Modified calcium saturated montmorillonite (Mt) was prepared at different 3-aminopropyltriethoxysilane (APTES) loadings through grafting. The as-products were characterized by XRD, FTIR and elemental analysis. Surface analysis such as acidity was examined at different H+ concentrations, showing that the release of OH− from the modified samples increased in the following order: APTES4.0CEC–Mt > APTES3.0CEC–Mt > APTES2.0CEC–Mt > APTES1.0CEC–Mt. Batch experiments were conducted and different conditions (pH, temperature and co-existing ions) were used to evaluate the adsorption capacity of the modified samples. The study developed a new way to confirm the mechanism, which indicated that ligand adsorption was the dominant sorption mechanism for Sr(II) uptake onto APTES–Mts. In general, APTES grafted montmorillonite possessed a higher efficiency of Sr(II) uptake and showed great potential for Sr(II)-rich wastewater treatment.
研究领域:
环境科学
·
材料科学
·
化学工程
·
环境污染治理
·
吸附科学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2017
·
IF 6.216
Xiang Li,Huaili Zheng,Yili Wang,Yongjun Sun,Bincheng Xu,Chuanliang Zhao
Modified natural polymer flocculants has been the focus of research in environmental engineering field. Natural large molecular compound, chitosan (CTS) with many functional amino and hydroxyl groups can be easily modified to enhance its original functions. This work presents an environmentally friendly chitosan-based cationic polyacrylamide flocculants (CTS-g-PAMA) with enhanced function of sterilization and flocculation . CTS-g-PAMA was synthesized through Ultraviolet (UV)-initiated copolymerization. Structure characterization of FTIR, 1 H NMR, XRD and UV spectrum confirmed the successful grafting of AM and MAPTAC. Scanning electron microscopy (SEM) analysis results showed that CTS-g-PAMA exhibited a porous structure with a prodigious surface area. CTS-g-PAMA was then applied to treat a series of simulated waste water containing kaolin or Escherichia coli . Flocculation tests indicated that CTS-g-PAMA not only showed excellent flocculation effect but also showed high sterilization capability. A series of ONP concentration measurement tests through UV spectra analysis and 3D EEM analysis of suspension before and after flocculation were conducted to study sterilization mechanism, and results revealed the sterilization effect of CTS-g-PAMA was essentially bactericidal, not just antibacterial.
研究领域:
环境工程
·
高分子化学
·
水处理技术
·
材料科学
·
微生物学
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2024
·
IF 4.9
Yurou Feng,Amatjan Sawut,Rena Simayi,Xieraili Maimaitiyiming,Xueying Jiao
With the advancement of science and technology, the issue of wastewater pollution has escalated, necessitating urgent attention to wastewater treatment . In this study, a highly efficient adsorbent for Cu 2+ was successfully synthesized through in situ self-assembly using Ca 2+ as the cross-linking agent in ZIF-8@ALG composite hydrogel. The results demonstrated that the incorporation of Ca 2+ as the cross-linker enhanced both adsorption capacity and swelling properties of ZIF-8@ALG composite hydrogel. Adsorption performance evaluation revealed that the hydrogel followed pseudo-second-order kinetic model for Cu 2+ adsorption and Freundlich isotherm model with a theoretical maximum adsorption capacity of 309.57 m g −1 . Thermodynamic analysis indicated that Cu 2+ adsorption onto the hydrogel occurred spontaneously with heat absorption. Furthermore, excellent reusability was observed after five cycles of usage without significant loss in adsorption efficiency. Overall, these findings highlight the potential application of ZIF-8@ALG composite hydrogel as an effective solution for wastewater remediation and recovery of heavy metal ions.
研究领域:
环境科学
·
材料科学
·
化学工程
·
环境污染治理
·
重金属去除
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2022
·
IF 4.598
Dexi Liu,Shichang Xu,Yanmeng Cai,Yue Wang,Jiaqi Guo,Youlin Li
The conventional separation technologies, like chemical precipitation and adsorption processes, cannot quickly and selectively separate and recycle heavy metal ions from waste. Due to its rich sulfur content and excellent electrical conductivity, vanadium disulfide is a potential material for effectively removing lead from wastewater. The vanadium disulfide material with selective adsorption ability was introduced into CDI technology to construct a coupling technology with both advantages. The N -doped modified ZIF@vanadium disulfide (ZAC@VS 2 ) composites were successfully synthesized by hydrothermal method. Electrosorption experiments show that ZAC@VS 2 material presents the remarkable saturated adsorption capacity to lead(II) ions (239.52 mg/g) in the 500 mg/L PbCl 2 solution. In the triplex blend system (Fe 3+ /Pb 2+ /Na + ) with each solute density of 100 mg/L, the saturated adsorption efficiency of 85.4% to Pb 2+ can still be maintained. In addition, compared with the Langmuir(R 2 =0.873) adsorption isotherm model, the Freundlich model (R 2 =0.922) can be better used to fit the adsorption process, which proves that the adsorption process is multilayered and heterogeneous. XPS tests and competitive adsorption experiments show that the electric double layer (EDL) and complexation together promote the selective adsorption of heavy metal ions by ZAC@VS 2 . ZAC@VS 2 composite electrode shows excellent performance in the removal of lead ions in battery waste liquid, indicating the potential of introducing ZAC@VS 2 into CDI to remove lead ions.
研究领域:
环境科学
·
材料科学
·
水处理技术
·
重金属污染控制
·
电化学工程
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）