NEW JOURNAL OF CHEMISTRY
·
2019
·Vol. 43
·期 3
·1551-1561
·
IF 3.069
Long Meng,Yunan Wu,Kai Pan,Ye Zhu,Xiaojie Li,Wei Wei,Xiaoya Liu
Nickel-titanium alloy (NiTi alloy) has recently received an increasing amount of attention. However, the release of toxic nickel ions and the threat of implant infections has limited its clinical applications. Thus, we report a promising copolymer coating with excellent nickel ion (Ni2+) inhibition release, cytocompatibility, and antimicrobial properties to solve these safety issues involving NiTi alloy implantation. Quaternized copolymers poly (7-hydroxy-4-methylcoumarin methacrylate-co-2-hydroxyethyl methacrylate-co-2-(dimethylamino)ethyl methacrylate) (PCHD-Q) with many hydroxyl and tertiary amine groups were first synthesized, self-assembled into nanoparticles, and then deposited on NiTi substrate through electrodeposition. After UV irradiation, scanning electron microscopy (SEM) images revealed that homogeneous, continuous, and dense coatings were obtained. The coatings showed good improvement of protective behavior for the NiTi alloy in an in vitro environment and could significantly decrease the release of Ni2+ through physical barriers and physical adsorption, which could obviously reduce cytotoxicity inducing by Ni2+. According to in vitro cell viability and antibacterial tests, the quaternized coating materials not only provided a relatively stable biointerface for cell adhesion, spreading and growth, but also obtained excellent antimicrobial activity for the bare NiTi alloy against S. aureus and E. coli. These results suggested that our coatings materials have the potential for improving the safety and success rate of NiTi-based implantations.
研究领域:
材料科学
·
生物医学工程
·
表面涂层技术
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Ruxia Ning,Xichuang Cheng,Fuhou Lei,Jiufang Duan,Kun Wang,Jianxin Jiang
Natural and high-quality biomass-based coating films are considered promising packaging to consumers. However, the poor mechanical properties and weak antimicrobial activity of biomass materials have limited their practical application. A cleaner and low-cost strategy is used to prepare antimicrobial, self-recovery, and biocompatible coating films using tamarind kernel powder (TKP) and chitosan (CS). The TKP protein and chitosan chains were covalently cross-linked with tetrakis(hydroxymethyl)phosphonium chloride (THPC) to form a three-dimensional network based on THPC-amine dynamic bonds, and act as a sacrificial bond. Then, the hydrogen bond forms an interpenetrating network to build a strong multi-network film. Thus, the THPC multi-crosslinking TKP based films showed enhanced stretchable property (increased from 3.23 % to 77.54 %), and self-recovery after 30 min of recovery. Additionally, the film has been found to exhibit low water vapor permeability, low oxygen transmittance rate, and excellent antimicrobial efficiency (maximum inhibition zones: 24.39 mm). Moreover, the prepared films were demonstrated to be biocompatible and non-hemolytic based on cell viability and hemolytic activity assays. The method described herein could broaden the scope of biomass-based materials in the realm of antimicrobial coating films.
研究领域:
高分子材料科学
·
食品包装工程
·
生物医学材料
·
天然高分子化学
·
抗菌材料
·
可再生资源利用
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2018
·
IF 3.909
Yunbo Wu,Ye Ying,Yuhong Liu,Haijiang Zhang,Jianying Huang
Poly (vinyl alcohol) (PVA) and chitosan (CH)-based blend films were prepared via a simple mixing and casting method. The films were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and ultraviolet–visible spectroscopy (UV–vis). Mechanical properties, thermogravimetric (TG), derivative thermogravimetric (DTG), and the inhibition of biofilm formation against Pseudomonas aeruginosa PAO1 ( P. aeruginosa PAO1) of CH/PVA films were investigated. The results indicated that CH and PVA in the blend films interacted by physical crosslinks consisting of intermolecular hydrogen bonds and intermolecular hydrogen bonds with compatibility, and were more thermally-stable than that of PVA. CH addition decreased the tensile strength and the light transmittance. CH60:PVA40 film showed notable activity against adhesion and inhibited biofilm formation of P. aeruginosa PAO1, indicating that CH60:PVA40 film could be applied as an antimicrobial and biofilm inhibiting food packaging material .
研究领域:
生物材料学
·
微生物学
·
食品科学
·
高分子科学
·
抗菌材料
·
包装工程
✓ 已验证
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2015
·
IF 4.074
Hui Li,Lincai Peng
To confer cellulose fibers antimicrobial and antioxidant activities, chitosan (CS)/lignosulfonates (LS) multilayers were constructed on fibers surfaces through layer-by-layer deposition technique. The formation of CS/LS multilayers on cellulose fibers surfaces was verified by X-ray photoelectron spectroscopy (XPS) and zeta potential measurement. The surface morphologies of CS/LS multilayers on fibers surfaces were observed by atomic force microscopy (AFM). The results showed that characteristic element (i.e. N and S element) content increased with increasing bilayers number, the surface LS content increased linearly as a function of bilayers. Zeta potential of modified fibers was inversed after deposition of each layer. AFM phase images indicated that the cellulose microfibrils on fibers surfaces were gradually covered by granular LS aggregate. The antimicrobial testing results demonstrated that CS/LS multilayers modified fibers with CS in the outermost layer exhibited higher antimicrobial activity against Escherichia coli . The antioxidant testing results showed that antioxidant activity of CS/LS multilayers modified fibers was better than that of original fibers under the same oxidation conditions.
研究领域:
高分子材料
·
表面科学
·
生物医学工程
·
功能材料
·
纳米技术
✓ 已验证
DOI
高影响因子
Sustainable Materials and Technologies
·
2024
·
IF 8.6
Wei Tan,Chunlong Zuo,Yin Tian,Lu Bai,Lina Jiang,Jieyun Zhao,Xiaoyu Liu,Yuanlin Ren,Xiaohui Liu
The white pollution caused by non-degradable plastics poses a serious threat to human society and the environment, thus developing biodegradable material is urgent. In this work, a novel phosphonitrile hybrid metal-polyphenol network was constructed and used for the preparation of flame retardant , UV resistant and antibacterial multifunctional polyvinyl alcohol composite (PVA@HCPD-Ag). The limiting oxygen index (LOI) value of PVA@HCPD-Ag was improved to 33.5%, while the peak heat release rate (PHRR) and total heat release (THR) decreased by 35.62% and 47.76%. Besides, the ultraviolet protection factor (UPF) value of PVA@HCPD-Ag was significantly improved from 4.63 of the original PVA to 482.79, while the tensile strength was increased by 10.23%. Furthermore, the inhibition efficacy of PVA@HCPD-Ag for E. coli and S. aureus was up to 98.12% and 99.99%. This work explored the synergistic flame retardant effect of in-situ reduced Ag 0 and phosphonitrile crosslinked polyphenol network and proposed an advanced strategy for developing high value-added functionalized PVA materials.
研究领域:
高分子材料科学
·
功能材料
·
纳米复合材料
·
生物医用材料
·
环境友好材料
✓ 已验证
DOI
高影响因子
CHEMOSPHERE
·
2023
·
IF 8.8
Lei Wu,Xiaolu Gong,Cong Ma,Lan Xu,Ming Li,Chen Lyu,Nan Sun
In this study, hydrogels generated by the Schiff base reaction between citral and chitosan (CS) were used for the first time to improve the anti-bacterial property of forward osmosis (FO) membranes. The composite membranes were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR), Water contact angle (WCA), Zeta potential and confocal laser scanning microscopic (CLSM). In the FO filtration experiment, the membrane performance of TFC-1 with 1 M sodium chloride solution as the draw solution and deionized water as the feed solution was the best, with the water flux of 25.54 ± 0.7 L m −2 h −1 and the reverse salt flux of 4.7 ± 0.4 g m −2 h −1 . Although the hydrogel coating produced a certain hydraulic resistance, the flux of the modified membrane was only reduced by about 8%, compared with the unmodified membrane. However, the anti-bacterial property ( Pseudomonas aeruginosa ) and anti-fouling properties (bovine serum protein and lysozyme protein) of the modified membranes were improved, showing good antibacterial properties (99%) and flux recovery rate (over 90%). The modified method has the advantages of easy access to raw materials, simple operation and no risk of secondary pollution, which can effectively reduce the cost of chemical cleaning and extend the service life of the membrane. The modification of membrane by chitosan-based hydrogel is a promising option in the field of membrane anti-bacteria.
研究领域:
材料科学
·
膜科学与技术
·
生物医学工程
·
环境功能材料
·
抗菌材料
✓ 已验证
DOI
高影响因子
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE
·
2020
·Vol. 217
·期 6
·1900536
·
IF 1.759
Parisa Zeaiean Firouzabadi,Hajar Ghanbari,Nafiseh Mahmoudi,Seyed Mohammad Amin Haramshahi,Jafar Javadpour
Polymer-based composites are used for wound healing applications. This work aims to prepare an inorganic-polymer nanocomposite based on bentonite, poly(vinyl alcohol), and bacterial cellulose by electrospinning for wound healing. The nanocomposite is synthesized using a solution intercalation technique, with 1–2 wt% nanobentonite concentration variation. The effects of commercial and laboratory-synthesized nanobentonite as well as the extract of the green walnut shell (EGWS) are examined and characterized by different techniques. The addition of nanobentonite increases the average size of fibers and tensile strength up to 200 nm and more than 15 MPa, respectively, due to the presence of hydrogen bonding formed between the nanobentonite sheets and polymer matrix. By the addition of synthetic nanoclay and EGWS, moderate elongation and strength are achieved. The hydrophilicity shows a decreasing trend up to 2 wt% of commercial nanobentonite; however, the laboratory-synthesized nanobentonite is not significantly effective. Effects of extracts on the viability of cultured human adipose tissue–derived mesenchymal stem cells (ADSCs) are quantitated, where the samples containing 1–2 wt% of commercial nanobentonite have less toxicity than others. Antibacterial activity is tested against both Escherichia coli and Staphylococcus aureus bacteria according to the agar diffusion test for 72 h, in which EGWS-based mats exhibit strong antimicrobial activity.
研究领域:
生物材料学
·
组织工程
·
纳米医学
·
再生医学
·
药剂学
·
微生物学
·
高分子科学
✓ 已验证
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2019
·
IF 6.044
Yongsheng Ni,Wanmei Lin,Ruojun Mu,Chunhua Wu,Zheya Lin,Su Chen,Jie Pang
The exploration of methods to produce biomaterials with antibacterial properties in ultra-small scales is of great scientific and technological interest. Here, we reported a microfluidic spinning approach to prepare a novel film combined with konjac glucomannan (KGM), polyvinylpyrrolidone (PVP), and epigallocatechin gallate (EGCG). The film was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and thermogravimetric analysis. This film was transparent, orderly, thermally stable, and uniform in size, with an average width less than 1 μm. Also, the film exhibited excellent antibacterial efficiency (97.1% against E. coli , 99.7% against S. aureus , 97.3% against S. enterica and 99.9% against B. subtilis ) in our antibacterial test. In addition, the film promoted wound healing with the advanced development of neovascularization and hair follicles. This strategy provides a facile and green pathway for the construction of biomaterial films for medical applications.
研究领域:
生物材料学
·
医学工程
·
微生物学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Materials Technologies
·
2019
·Vol. 4
·期 10
·1900426
·
IF 5.395
Peng Bi,Xiaowei Liu,Yang Yang,Ziyu Wang,Jing Shi,Gaomin Liu,Fangfang Kong,Benpeng Zhu,Rui Xiong
Wearable devices have become very important for collecting health information and monitoring the condition of seriously ill patients. However, most recently developed wearable devices can only monitor limited signals within a very small range of values. A novel sensor is fabricated by modifying the surface of polyimide nanowires with silver nanoparticles. These nanowire sensors can sense both pressure and temperature changes and have antimicrobial properties. The fabricated sensor can detect a wide range of pressure variation from 5 KPa to 100 KPa. A theoretical model is developed to explain the sensing mechanism of the silver-nanoparticle-modified polyimide nanowires. The experimental and theoretical results for the nanowires are in good agreement. By attaching these sensors to human joints and fingers, real-time information can be detected for human motion, such as walking or holding a hot cup of water. The excellent performance of this device shows that it has great potential for use in artificial skins for detecting temperature and human motion.
研究领域:
生物医学工程
·
纳米医学
·
柔性电子
·
智能材料
·
转化医学
·
可穿戴传感器
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2018
·
IF 4.439
Deshan Cheng,Mantang He,Wenbin Li,Jihong Wu,Jianhua Ran,Guangming Cai,Xin Wang
Growing of ZnO nanoparticles on PET films without crystal seeding has been achieved by employing polydopamine as the anchor. The PDA layer was formed on the surface of PET film by the polymerization of dopamine. The PDA-PET was dipped into zinc precursors for hydrothermal growth of ZnO nanoparticles. Cluster-like ZnO nanoparticles were obtained and the special structure was affected by the growing time and zinc ion concentration. The surface morphology, structure and properties were characterized, and the functions including antimicrobial activity and UV protection of the ZnO-coated PET film were investigated. The developed facile hydrothermal approach without seeding will benefit the development of UV resistant and antimicrobial PET films.
研究领域:
材料科学
·
纳米技术
·
表面功能化
·
生物医用材料
·
高分子材料
✓ 已验证
DOI
高影响因子
Nano Select
·
2021
·Vol. 2
·期 6
·1225-1232
·
IF 0
Ziqi Zhang,Yan Zhang,Yingqi Liu,Siqi Zhang,Kaida Yao,Yueqiu Sun,Yang Liu,Xiangzhi Wang,Weimin Huang,Jun Lu
Cerium has been used as an implanted alloy additive for many years for it can enhance the mechanical properties of the alloy and restrain the corrosion of the implant. Moreover, cerium oxide nanoparticles are often used as an antibacterial material. However, there were few researches focusing on the antibacterial properties of Ce 3+ and Ce 4+ ions, instead of their corresponding oxide, as potential antibacterial coatings. Thus in this work, we loaded Ce ions into the porous structure of the ZIF-8 nanoparticles and co-deposited them with hydroxyapatite as a composite coating onto anodized titanium dioxide nanotubes array in order to test whether it can improve the anti-corrosion and antibacterial properties of the materials without affecting the biocompatibility.
研究领域:
生物材料学
·
纳米医学
·
表面工程
·
骨科植入物
·
抗菌材料
·
生物医学工程
✓ 已验证
DOI
危险品化学品经营许可证（带存储）