文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,358+ SCI 论文 与阿拉丁产品引用相关
2,303,472.95 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第1至12个,产品总数15个

设置提升方向
猝灭
Materials Today Chemistry · 2022 · IF 7.613

Obtain full visible spectrum light-emitting diode illumination via bismuth-activated cyan phosphors

S. Wu,Y. Fu,Q. Liu,P. Xiong,D. Wang,G. Zhang,S. Yuan,Y. Chen

Developing highly efficient cyan-emitting fluorescent materials is essential to bridge the cyan gap in phosphor-converted white light-emitting diodes for full-spectrum white illumination. Here, a Bi-doped cyan phosphor has been reported to solve this gap. The phase purity, photoluminescence emission/excitation spectra, concentration quenching, lifetime decay curves, and temperature-dependent photoluminescence emission spectra were systematically investigated. SrLaGaO 4 :Bi 3+ exhibits a broad excitation band (250–400 nm), which matches with the emission of a commercial near-ultraviolet light-emitting diode chip. The cyan light peaked at 475 nm is observed, which is attributed to the 3 P 1 → 1 S 0 transition of Bi 3+ . The thermal quenching experiment was performed, and the activation energy was calculated as 0.36 eV. Finally, full-spectrum white light-emitting diode devices were fabricated using SrLaGaO 4 :Bi 3+ phosphors, commercial blue BaMgAl 10 O 17 :Eu 2+ phosphor, green (Ba, Sr) 2 SiO 4 :Eu 2+ phosphor, and red CaAlSiN 3 :Eu 2+ phosphor, which displayed an International Commission on an illumination coordinate of (0.3732, 0.3850), a correlated color temperature of 4290 K, and a color rendering index of 93.2 at a drive current of 20 mA. This result indicates that SrLaGaO 4 :Bi 3+ plays an essential role in bridging the cyan gap, providing new inspiration for applying cyan-emitting phosphors in full-spectrum white lighting.

研究领域: 材料科学 · 光学工程 · 固态照明 · 发光材料 · 无机化学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
MICROCHEMICAL JOURNAL · 2023 · IF 4.8

Highly selective fluorescent probe for benzidine determination using carbon dots fabricated from amoxicillin and sodium carbonate

Menghua Liu,Shuangying Li,Zhi Li,Yanhui Li,Yue Zhang,Jingwen Niu,Linchun Nie,Chunmao Chen,Qingxiang Zhou

Amoxicillin is one of the most important semi-synthetic penicillin broad-spectrum β-lactam antibiotics and has achieved many applications. There are few reports on its application for synthesizing carbon dots (CDs). Present work explored the possibility of amoxicillin converted into CDs with sodium carbonate used as the co-reactant employing facile hydrothermal method. The obtained CDs exhibited good selectivity and sensitivity to benzidine and could be explored as an effective fluorescence probe for monitoring benzidine. The fluorescence intensity of CDs was quenched based on the principle of static quenching due to the formation of a non-fluorescent complex between CD and benzidine. Within the range of 0.2–2 μM and 2–16 μM, CDs possessed good linear characteristics, high sensitivity, and a low detection limit of 0.08 μM. The results demonstrated that the fluorescence probe possessed the merits of simplicity, rapidity, low cost, short analytical time, high selectivity and sensitivity, and good stability. According to the verification results from the real water samples, the fluorescence probe had high reliability and feasibility, and could be employed for monitoring benzidine in waters.

研究领域: 分析化学 · 环境监测 · 纳米材料 · 荧光传感 · 药物化学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF LUMINESCENCE · 2021 · IF 3.599

Double perovskite structure CaLaMgTaO6: Bi3+, Eu3+ co-doped phosphors for optical temperature measurement

Chenwei Xu,Chenxia Li,Degang Deng,Hua Yu,Le Wang,Changyu Shen,Xufeng Jing,Shiqing Xu

A series of new double perovskite structure CaLaMgTaO 6 : Bi 3+ , Eu 3+ phosphors were synthesized by high-temperature solid-phase method. The crystal structure, luminescence characteristics and temperature sensing performance have been systematically studied. The substitution rule of Bi 3+ in CLMT and its luminescence characteristics are described. The decay curve of Bi 3+ further proves the existence of an energy transfer from Bi 3+ to Eu 3+ . They have different thermal quenching behaviors, and their fluorescence intensity ratio (FIR) parameter has tremendous temperature sensing performance. Under 329 nm ultraviolet excitation, the emission peaks at 408 nm and 614 nm are used as the reference signal, the largest absolute sensitivity is 0.0127 K −1  at 573 K, and the maximum relative sensitivity is 1.33%K −1 at 483 K. This indicates that CaLaMgTaO 6 : Bi 3+ , Eu 3+ is a material with excellent temperature measurement performance and applicability in non-contact optical thermometers.

研究领域: 材料科学 · 发光材料 · 光学传感 · 无机化学 · 功能材料
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2022 ·Vol. 49 ·期 7 ·10273-10279 · IF 5.532

Zero-thermal-quenching of LiAl5O8: Eu2+, Mn2+ phosphors by energy transfer and defects engineering

Daiyuan Liu,Ting Wang,Yichun Liu,Chao Wang,Zhichao Liu,Xiaodie Zhu,Ya Liu,Jian Zhang,Zhaowei Teng,Yang Zhong,Yakovlev Alexey Nikolaevich,Xuhui Xu

The photoluminescence behavior of inorganic phosphors is generally influenced by thermal stability, which determines the luminescence efficiency of the corresponding devices. Here, a series of Eu 2+ , Mn 2+ co-doped LiAl 5 O 8 blue-green-emitting phosphors with thermal robust are successfully fabricated. The concentration-dependent emission spectra and the decay curves of the as-obtained LiAl 5 O 8 : Eu 2+ , Mn 2+ samples manifest the occurrence of the energy transfer from Eu 2+ to Mn 2+ ions via dipole-dipole interaction, and the corresponding emitted colors are gradually modulated from blue to green under the excitation of 310 nm. Moreover, the zero-thermal-quenching luminescence is observed when the operation temperature is up to 423 K, which is attributed to the energy release from the trapping centers to emitting centers (Eu 2+ and Mn 2+ ) at high temperature. Furthermore, a warm white light-emitting diodes (WLEDs) device with correlated color temperature of 5061 K, a color rendering index of 80.6 and long-term stability is fabricated by combining UV LED chip (λ ex  = 310 nm), as-obtained LiAl 5 O 8 : Eu 2+ , Mn 2+ phosphor, commercially available red phosphor and green phosphor. These results prove the potential application of the as-obtained LiAl 5 O 8 : Eu 2+ , Mn 2+ phosphor for UV-pumped WLEDs devices.

研究领域: 材料科学 · 发光材料 · 固态化学 · 光电子学 · 无机化学 · 器件物理 · 纳米材料
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF LUMINESCENCE · 2013 · IF 2.144

Comparative study of the binding of trypsin to caffeine and theophylline by spectrofluorimetry

Ruiyong Wang,Xiaohui Kang,Ruiqiang Wang,Rui Wang,Huanjing Dou,Jing Wu,Chuanjun Song,Junbiao Chang

The interactions between trypsin and caffeine/theophylline were investigated by fluorescence spectroscopy , UV–visible absorption spectroscopy , resonance light scattering and synchronous fluorescence spectroscopy under mimic physiological conditions . The results revealed that the fluorescence quenching of trypsin by caffeine and theophylline was the result of the formed complex of caffeine–trypsin and theophylline–trypsin. The binding constants and thermodynamic parameters at three different temperatures were obtained. The hydrophobic interaction was the predominant intermolecular forces to stabilize the complex. Results showed that caffeine was the stronger quencher and bound to trypsin with higher affinity than theophylline .

研究领域: 生物化学 · 分子药理学 · 药物代谢 · 蛋白质-配体相互作用 · 光谱学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF LUMINESCENCE · 2024 · IF 3.3

Violet light excitable BaLiZn3(PO4)3: Eu orange-red-emitting phosphor towards white LED application

Yaping You,Ya Zheng,Zesheng Pan,Yunluo Wang,Tianrui Zhou,Minghui Wang,Haijie Chen,Wan Jiang,Lianjun Wang

White light-emitting diode (WLED) has been widely used as solid-state lighting in recent years, with the advantages of energy saving, high luminous efficiency , and safety. Red phosphors are crucial to the color rendering index of WLED, and Eu 3+ -activated red phosphors can significantly improve the chromaticity performance of WLED. In this work, a series of new orange-red emitting BaLiZn 3 (PO 4 ) 3 : Eu 3+ phosphors were synthesized through high-temperature solid-state reaction method. The phase composition , crystal structure, morphology and photoluminescence properties of BaLiZn 3 (PO 4 ) 3 : Eu 3+ samples were investigated. The phosphors can be effectively excited by the violet light at 394 nm and emit orange-red lights corresponding to the electric dipole transition (5D 0 →7F 1 ) at 594 nm. The optimal doping concentration of Eu 3+ ions was about 5 mol%. The concentration quenching was caused by the electric dipole-dipole interaction between Eu 3+ ions. Temperature-dependent PL spectra indicate that BaLiZn 3 (PO 4 ) 3 : Eu 3+ has excellent emission and color stability at high temperatures. The color coordinates were calculated and fall in the orange-red luminescent area. The color purity is about 98.3 %, and the correlated color temperature is 1710K. These results indicate that the new orange-red phosphor BaLiZn 3 (PO 4 ) 3 : Eu 3+ has potential application prospects in WLED.

研究领域: 材料科学 · 发光材料 · 固体照明 · 无机化学 · 光电子学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
FOOD CHEMISTRY · 2019 · IF 5.399

Effect of pH on the interaction of porcine myofibrillar proteins with pyrazine compounds

Hui Shen,Mouming Zhao,Weizheng Sun

The influence of pH-induced structural modifications of myofibrillar proteins (MPs) on their interaction mechanisms with pyrazine compounds was investigated. At a lower pH (4.9, 5.5), MPs aggregated to larger particle sizes due to enhanced the protein–protein interactions. The binding with pyrazine compounds was strongly affected by pH and the nature of flavor compounds. MPs exhibited flavor releasing behavior, probably due to protein–protein interactions and surface tension. Fluorescence analysis revealed that the interaction of pyrazine compounds with MPs followed a combination of static and dynamic quenching. The changes in quenching constant ( K sv ) might be attributed to a dynamic quenching, probably due to protein aggregation. The percentages of free 2,5-Dimethylpyrazine (2,5-DMP) were similar to K sv . Thermodynamic parameters indicated that electrostatic interactions and hydrophobic interactions were the major acting forces in the binding of MPs to 2,5-DMP. The binding of 2,5-DMP increased the α-helix content of MPs.

研究领域: 食品科学 · 蛋白质化学 · 风味化学 · 分子互作 · 生物物理化学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Small · 2023 ·Vol. 20 ·期 9 ·2306758 · IF 13.3

Pressure-Driven Polymorphic Transition, Emergent Insulator-To-Metal Transition, and Photoconductivity Switching in Violet Phosphorus

Chen Li,Ke Liu,Dequan Jiang,Huacai Yan,En Chen,Yingying Ma,Haoming Cheng,Ting Wen,Binbin Yue,Yonggang Wang

Polymorphic phase transition is an essential phenomenon in condensed matter that the physical properties of materials may undergo significant changes due to the structural transformation. Phase transition has thus become an important means and dimension for regulating material properties. Herein, this study demonstrates the pressure-induced multi-transition of both structure and physical properties in violet phosphorus, a novel phosphorus allotrope. Under compression, violet phosphorus undergoes sequential polymorphic phase transitions. Concomitant with the first phase transition, violet phosphorus exhibits emergent insulator–metal transition, superconductivity, and dramatic switching from positive to negative photoconductivity. Remarkably, the resistance of violet phosphorus shows a sudden drop of around 10 7 along with the phase transition. In addition, piezochromism from translucent red to opaque black and suppression of photoluminescence are observed upon compression. Of particular interest is that the sample irreversibly transforms into black phosphorus with a pronounced discrepancy in physical properties from the pristine violet phosphorus after decompression. The abundant polymorphic transitions and property changes in violet phosphorus have significant implications for designing novel pressure-responsive electronic/optoelectronic devices and exploring concealed polymorphic transition materials.

研究领域: 凝聚态物理 · 材料科学 · 高压物理 · 半导体物理 · 光学材料 · 相变动力学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHINESE JOURNAL OF CHEMISTRY · 2014 ·Vol. 33 ·期 1 ·125-130 · IF 1.04

Carboxylatopillarene-Modified Reduced Graphene Oxides with High Water Dispersibility for Fluorescent Dye Sensing

Ting Zhou,Hao Yu,Mingqiang Liu,Ying-Wei Yang

Carboxylated pillar[5]arene (CP5) macrocycles were modified onto the surface of reduced graphene oxide (RGO) via covalent bonds to form new pillarene-functionalized RGO nanosheets, i.e. , RGO-CP5. The obtained RGO-CP5 nanosheets capable of molecular recognition exhibited much better water-dispersibility and enhanced fluorescence-quenching property as compared with native RGO. This new sensing platform holds great potentials in the sensing and detection of analytes, such as organic dye molecules and pesticides, in aqueous solutions.

研究领域: 分析化学 · 纳米材料科学 · 传感器技术 · 环境监测 · 分子识别
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Russian Journal of Physical Chemistry A · 2016 ·Vol. 90 ·期 2 ·399-405 · IF 0.597

Fluorescent film sensor for nitroaromatics prepared via grafting a conjugated polymer on a glass slide surface

Wang Aiqing,Cui Yuezhi,Tao Furong,Gu Caihong,Wang Shijie,Li Tianduo

A functionalized glass sensor ( G-P ) was prepared for detecting nitroaromatic compounds (NACs) by chemically immobilizing a conjugated polymer P on the surface of a glass slide. The monolayer film sensor had several advantages: the signal amplification effect of conjugated polymers, no leakage of sensing materials in solution, and good permeability for the analytes. Fluorescence quenching studies demonstrated that the sensor was highly sensitive to NACs. When the DNT concentration was 1.03 × 10 –7 mol/L, the quenching efficiency (1– I / I 0 ) of G-P reached 52.8%. Moreover, the excellent properties of reversibility, selectivity and sensitivity indicated the glass G-P might be a promising sensor in the field of explosives detection.

研究领域: 分析化学 · 材料科学 · 传感器技术 · 环境监测 · 安全检测 · 高分子化学 · 光学传感
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2022 ·Vol. 49 ·期 5 ·8204-8211 · IF 5.532

Eu3+-doped La2(MoO4)3 phosphor for achieving accurate temperature measurement and non-contact optical thermometers

Qianchao Ma,Qiyun Liu,Meihua Wu,Yifei Liu,Rui Wang,Ruxian Zhou,Yanheng Xu,Haichao Wei,Ruiyu Mi,Xin Min,Lefu Mei,Zhaohui Huang,Bin Ma

In this study, La 2 (MoO 4 ) 3 doped with Eu 3+ was synthesized by the high-temperature solid-state method. The phase composition of the Eu 3+ -doped La 2 (MoO 4 ) 3 sample was confirmed by X-ray powder diffraction (XRD) analysis, and the microstructure was observed via the scanning electron microscopy (SEM). Under the excitation at 211 nm, the room temperature emission spectra of Eu 3+ in the samples with different doping levels were recorded. In addition, the prepared La 2 (MoO 4 ) 3 : x Eu 3+ ( x  = 0–0.25) phosphors were color tunable. A non-contact optical thermometer with high sensitivity and high-temperature resolution was fabricated based on the different thermal quenching behaviors of the Mo–O group and Eu 3+ center. The fluorescence intensity ratio (FIR), temperature resolution (ΔT), maximum absolute and relative sensor sensitivity (Sa and Sr) of La 2 (MoO 4 ) 3 :Eu 3+ were calculated according to different thermal quenching effects between room temperature (298K) and 573K of Eu 3+ and Mo–O group. These results show that La 2 (MoO 4 ) 3 :Eu 3+ has excellent sensitivity and temperature resolution, good reversibility and reliability, as Sa = 0.0525 K -1 , Sr = 0.3724. % K −1 , ΔT = 0.0806 K and the FIR error was only 0.62%. Therefore, the Eu 3+ -doped La 2 (MoO 4 ) 3 is a promising candidate material for high performance non-contact optical thermometers.

研究领域: 材料科学 · 发光材料 · 光学传感 · 无机化学 · 功能材料 · 固体化学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
MATERIALS RESEARCH BULLETIN · 2022 · IF 5.6

Temperature-dependent Cs4PbBr6/CsPbBr3 perovskite composite for sensing 2,4-dinitriphenylhydrazine

Min Yang,Yujia Yan,Enzhou Liu,Qian Sun,Jun Fan

In recent years, all-inorganic perovskite has been extensively studied due to its excellent photoelectric properties, but the application of Cs n PbBr 2+ n perovskite with excellent stability in the field of chemical sensing has yet to be developed. Herein, Cs 4 PbBr 6 /CsPbBr 3 with good stability was successfully prepared by controlling the synthesis temperature to 100 ° C. The fluorescence intensity of Cs 4 PbBr 6 /CsPbBr 3 exhibited 2,4-dinitriphenylhydrazine (DNPH) concentration-dependent characteristics and could be used for sensing DNPH based on the dynamic quenching process triggered by the collision between Cs 4 PbBr 6 /CsPbBr 3 and DNPH. A good linear model was established based on the detection signal and DNPH concentration in the range of 0.05∼30 mg/L and the detection limit was 0.033 mg/L. This method was applied to detect DNPH in soil and tap water samples with satisfactory results obtained. Therefore, this research broadens the application of Cs n PbBr 2+ n in the field of quantitative detection and is expected to be developed into a fluorescent sensor for the detection of hydrazine substances.

研究领域: 分析化学 · 材料科学 · 环境监测 · 传感器技术 · 光电子学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。