FUEL PROCESSING TECHNOLOGY
·
2018
·
IF 3.956
Longfei Tang,Songjiang Chen,Shiwei Wang,Xiuxiang Tao,Huan He,Lei Zheng,Chenyan Ma,Yidong Zhao
The present work investigated the feasibility of heterocyclic sulfur (HS) removal for coal utilizing potassium tert-butoxide and hydrosilane system. Changes of sulfur forms with treatment time in Xinyu (XY) coal were determined by XANES . Results showed that reductions of total sulfur and organic sulfur for XY coal were 55% and 53%, respectively. >85% sulfoether and thiophene sulfur were removed after treated for 4 h, suggesting that the HS could be removed to a high extent from coal. However, contents of sulfonate and sulfonic ester increased with treatment time due to the hydrolysis and oxidation of intermediate products containing Si S bands. Furthermore, it indicated that the HS could be removed selectively from coal without destroying the macromolecular structure of coal based on analysis of desulfurization mechanism. These findings suggested that the desulfurization of refractory HS in coal could be obtained using the potassium tert-butoxide/hydrosilane reductive system, which provided a reference for desulfurization of high organic sulfur coal .
研究领域:
能源化学
·
煤化工
·
环境化学
·
应用化学
·
清洁燃料技术
✓ 已验证
DOI
高影响因子
Journal of Chemistry
·
2010
·Vol. 9
·期 1
·435-442
·
IF 0
Yabin Wang,Yanni Li,Fang Wang
The protective performances of coating formed by organo-silane with a linear alkyl chain for promoting aluminum alloy corrosion protection were evaluated by electrochemical techniques. The coatings were self-assembled in the hydrolyzed hydroalcoholic bath of n -octyltriethoxysilane (OS) and cured at hot air oven by different time. The coatings prepared by the less self-assembled number and shorter cured time, were always porous and scarcely protective. On the contrary, those built by the more self-assembled number and the longer cured time had higher coverage on aluminum surface and favorable corrosion resistant property. The best results were obtained when n -octyltri-ethoxysilane (OS) was hydrolyzed 25 h, self-assembling of OS was conducted for five times and the multi-layers were cured at 120 for 1∼2 hours. In this case, the thicker, high cross-linked and more scarcely defective layer was formed on aluminum alloy surface.
研究领域:
材料科学
·
表面工程
·
腐蚀与防护
·
高分子化学
·
电化学
✓ 已验证
DOI
Journal of the Taiwan Institute of Chemical Engineers
·
2019
·
IF 3.834
Zhenlan Qin,Yanwei Zeng,Qianhui Hua,Qunjie Xu,Xixun Shen,Yulin Min
The preparation of the composite films on aluminum alloy 5052 (AA 5052) by the simple brush coating method in order to improve the corrosion resistance of aluminum alloy is the urgent need. However, some preparation methods, such as chemical vapor deposition, heat treatment, are relatively high cost and their preparation condition is very rigorous. In this paper, boron nitride and silane for boron nitride (h-BN)-dodecyl trimethoxysilane (DTMS)- (3-Aminopropyl) triethoxysilane (APTES) are used to improve corrosion resistance of AA 5052 with a simple and low-cost method. The corrosion resistance of the film has been characterized by electrochemical test in the 0.5 M H 2 SO 4 + 2 ppm HF acid solution. The results show that the protection efficiency of the h-BN-DTMS-APTES composite film reaches 99.97%, which greatly improves the corrosion resistance of the aluminum alloy 5052. When the sample is immersed into a 0.5 M H 2 SO 4 + 2 ppm HF aqueous solution for 120 h, the protection efficiency of the h-BN-DTMS-APTES composite film reaches 96.49% with good stability.
研究领域:
材料科学
·
表面工程
·
腐蚀与防护
·
纳米复合材料
✓ 已验证
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2016
·
IF 5.557
Sikuai Xue,Chengcai Li,Jiuming Li,Hailin Zhu,Yuhai Guo
To improve hydrophilicity and anti-fouling property of the polytetrafluoroethylene (PTFE) flat microfiltration (MF) membrane, a facile method was developed to modify the membrane via the co-deposition of catechol (CA) and polyethyleneimine (PEI) followed by surface mineralization of γ-(2,3-epoxypropoxy) propytrimethoxysilane (KH560). The surface chemical composition, surface morphology, hydrophilicity and filtration performance of the PTFE flat membrane were investigated by ATR-FTIR, XPS, FESEM, WCA and pure water flux measurements, respectively. After using this low-cost and simple modification method, the PTFE flat membrane was endowed with excellent hydrophilicity, high water permeation flux and superior anti-fouling property. Then, the oil/water separation tests were conducted using the modified PTFE flat membranes. The size distribution of the oil droplets is between 0.12–1.44 µm and the mean pore size of pristine PTFE flat MF membrane is 0.22 µm. The as-prepared hydrophilized PTFE flat membranes possess an excellent oil resistant ability with oil rejection ratio near 99%. Finally, the surface stability of the modified membrane was studied and the mineralized membrane showed excellent acid resistant ability. Therefore, this facile strategy holds attractive potential practical application in water environmental remediation.
研究领域:
材料科学
·
环境工程
·
膜技术
·
表面化学
·
水处理
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 86
·83288-83295
·
IF 3.289
Chongmin Liu,Shuai Liu,Pingxiao Wu,Yaping Dai,Lytuong Tran,Nengwu Zhu,Chuling Guo,Ihsanullah Sohoo
Modified calcium saturated montmorillonite (Mt) was prepared at different 3-aminopropyltriethoxysilane (APTES) loadings through grafting. The as-products were characterized by XRD, FTIR and elemental analysis. Surface analysis such as acidity was examined at different H+ concentrations, showing that the release of OH− from the modified samples increased in the following order: APTES4.0CEC–Mt > APTES3.0CEC–Mt > APTES2.0CEC–Mt > APTES1.0CEC–Mt. Batch experiments were conducted and different conditions (pH, temperature and co-existing ions) were used to evaluate the adsorption capacity of the modified samples. The study developed a new way to confirm the mechanism, which indicated that ligand adsorption was the dominant sorption mechanism for Sr(II) uptake onto APTES–Mts. In general, APTES grafted montmorillonite possessed a higher efficiency of Sr(II) uptake and showed great potential for Sr(II)-rich wastewater treatment.
研究领域:
环境科学
·
材料科学
·
化学工程
·
环境污染治理
·
吸附科学
✓ 已验证
DOI
高影响因子
IONICS
·
2024
·Vol. 30
·期 6
·3111-3119
·
IF 2.4
Teng Zeyu,Wang Zhilong,Li Zhongcheng,Chen Kanghua
Silicon is a strong competitor for the anode of the next generation of lithium-ion batteries, and ball-milled silicon has broad prospects as a low-cost method for preparing nano silicon. In order to match ball-milled silicon, it is imperative to develop better bonding agents with lower costs. Through adding amino silane coupling agent, the performance of ball-milling silicon anode is enhanced. This study explored the network structure formed by amino silane coupling agent with different chain lengths and polyacrylic acids. Herein, the crosslinked network prepared with 3-[2-(2-aminoethyl amino) ethyl amino] propyl-trimethoxysilane as coupling agent had the best performance, and the initial discharge capacity of the silicon anode prepared by this binder reached 3297.4 mAh·g −1 at a constant current density of 0.5A·g −1 , the initial Coulomb efficiency reached 92.25%. After 100 cycles, the discharge capacity of anode was still maintained at 2229.5 mAh·g −1 with excellent charge/discharge performance.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
高分子化学
·
表面改性
✓ 已验证
DOI
高影响因子
CARBON
·
2016
·
IF 6.198
Li-Zhi Guan,Jie-Feng Gao,Yong-Bing Pei,Li Zhao,Li-Xiu Gong,Yan-Jun Wan,Helezi Zhou,Nan Zheng,Xu-Sheng Du,Lian-Bin Wu,Jian-Xiong Jiang,Hong-Yuan Liu,Long-Cheng Tang,Yiu-Wing Mai
Three-dimensional (3D) graphene-based porous materials with a combination of low density, superelasticity , excellent mechanical resilience and tunable functionalities can be used in diverse applications. Here we report an approach of fabricating the stable and flexible 3D graphene aerogel materials with tunable functionality via a general silane-assisted processing that maintains an effective control of the chemistry, architecture and functionality of these porous structures. Simultaneous reduction and functionalization were achieved under both a low temperature and a low graphene oxide concentration in aqueous solution via using a facile one-step co-assembly method. The introduction of silane bonding tailors both the porous microstructure and the surface property of the lightweight aerogel effectively, subsequently providing improved mechanical properties and versatile functionalities including super compressive elasticity, outstanding cyclic resilient property, good electrical conductivity , stable viscoelastic properties, high level energy absorption capacity, excellent hydrophobicity , remarkable thermal stability and extremely high sensitivity of elasticity-dependent electrical conductivity. This opens up scalable and low-cost ways to the integration of microscopic two-dimensional graphene sheets into macroscopic 3D graphene aerogel materials, thus providing the possibility of fabricating novel lightweight porous aerogel materials with controllable functionalities and reversible compressibility for applications in numerous fields.
研究领域:
材料科学
·
纳米科技
·
高分子化学
·
功能材料
·
生物医学工程
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2017
·
IF 3.133
Chunmin Wang,Jun Shen,Xiankun Zhang,Bin Duan,Jiaxin Sang
A new organic-inorganic composite coating was generated on AZ31 alloy surface with sol-gel method to improve the anti-corrosion performance and biocompatibility of AZ31 alloy in the physiological environment. The results of electrochemical impedance spectroscopy (EIS), potentiodynamic polarization , pH variations in modified-simulated body fluid (m-SBF) demonstrated that the silane/Mg(OH) 2 composite coating significantly enhanced the anti-corrosion ability and slowed down the degradation of AZ31 alloy under in vitro condition. Fourier-transform infrared spectroscopy (FTIR) showed that the major composition of in-situ formation layer was Mg(OH) 2 . The surface morphology , chemical and phase constitutions of the composite coating were detected using scanning electron microscopy (SEM). The results demonstrated that the composite coating was uniform and defect-free. X-ray diffraction analysis (XRD) was also employed to characterize the corrosion products of all specimens immersed in m-SBF after 30 days. MTT and ALP tests indicated that the composite coating greatly enhanced the cell proliferation and osteogenic differentiation of osteoblasts on the AZ31 alloy surface.
研究领域:
生物材料学
·
表面工程
·
组织工程
·
生物医学工程
·
腐蚀科学
·
骨科学
✓ 已验证
DOI
高影响因子
SURFACE & COATINGS TECHNOLOGY
·
2018
·
IF 2.906
Bo Lin,Jian Chen,Zeng-Tian Li,Fu-An He,De-Hao Li
In this work, the fluoroalkylsilane-modified SiO 2 nanoparticles (NPs) were immobilized on the polyurethane sponges by a highly efficient drop-coating method using different polymers including poly(vinylidene fluoride), poly(vinylidene fluoride-ter-trifluoroethylene-ter-chlorotrifluoroethylene), polystyrene , and polyurethane as the adhesives to achieve the superhydrophobic modification of the polyurethane sponges for oil-water separation. The successful fluoroalkylsilane modification for the SiO 2 NPs was confirmed by TEM, SEM , FITR, XPS, and TGA. Furthermore, the surface-modified polyurethane sponges were investigated by SEM and two-dimensional EDS mapping. The contact angles of the surface-modified polyurethane sponges were in the range of 151.6°–154.3°, which confirmed the realization of the superhydrophobic modification for the polyurethane sponges. The demonstration experiments showed that the resulting surface-modified polyurethane sponge could effectively remove oil from the oil-water mixture by direct absorption or gravity-driven filtration. Moreover, the surface-modified polyurethane sponges possessed not only high absorption capability for different oils including peanut oil, pump oil, and silicone oil but also good reusability . We believe that such novel surface-modified polyurethane sponges might be potential candidates for the oil-water separation.
研究领域:
材料科学
·
环境工程
·
纳米技术
·
表面化学
·
分离科学
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2013
·Vol. 129
·期 4
·2313-2320
·
IF 1.395
Mingchao Luo,Xiaoxue Liao,Shuangquan Liao,Yanfang Zhao
Waste rubber powder (WRP) was modified by microwave, sol–gel method, and both microwave and sol–gel method, respectively. The mechanical and dynamic mechanical properties of natural rubber (NR)/modified WRP composite were investigated. The influence of bis-(3-(triethoxysilyl)-propyl)-tetrasulfide (TESPT) content on curing characteristics and mechanical properties of vulcanizate was also studied. The results showed that NR/WRP modified by both microwave and sol–gel method composite owned the best mechanical properties. Rubber processing analyzer was used to characterize the interaction between silica and rubber chains and the dispersion of silica. With increase of TESPT content, the Payne effect decreased. Scanning electron microscopy indicated the coherency and homogeneity of in situ generated silica filled vulcanizate. Dynamic mechanical analyzer showed that NR/WRP modified by both microwave and sol–gel method composite with 5 phr TESPT exhibited the lower tan δ at temperature range of 50–80°C, compared with composite without TESPT and the higher tan δ at temperature of 0°C, compared with the conventional modification of WRP. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
研究领域:
高分子材料科学
·
橡胶工程
·
复合材料学
·
材料化学
·
高分子物理
·
功能材料
·
可持续材料技术
✓ 已验证
DOI
高影响因子
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
·
2017
·
IF 4.075
Guangshun Wu,Lei Chen,Li Liu
Effects of silane and silica enrichment of carbon fibers (CFs) on interfacial properties of methylphenylsilicone resin (MPSR) composites were investigated. CFs were oxidized, grafted with 3-aminopropyltriethoxysilane (APS) and then modified with silica nanoparticles prepared by the sol-gel polymerization of tetraethoxysilane (TEOS). Chemical structures of CFs were characterized by confirming the successful grafting. Scanning electron microscopy (SEM) showed a uniform distribution of silica nanoparticles on the CFs surface. The interlaminar shear strength (ILSS) and impact toughness of silanized CF (CF-Siloxane) composites were 12.05% and 7.46% higher than those of untreated composites. However, ILSS and impact toughness of the hybrid fiber (CF/Si) composites obtained from the hydrolysis of different concentrations TEOS improved significantly, especially for grafting silica enrichment with the TEOS concentration of 0.05 mol/L (CF/Si0.05), increasing 45.64% in ILSS and 29.59% in impact properties. Moreover, the hydrothermal aging resistance was also improved greatly. Meanwhile, functionalization processes did not decrease fiber tensile strength .
研究领域:
复合材料科学
·
高分子材料
·
表面改性
·
界面工程
·
材料化学
✓ 已验证
DOI
高影响因子
IONICS
·
2019
·Vol. 26
·期 2
·649-660
·
IF 2.289
Yan Honglin,Ru Qiang,Gao Ping,Cheng Shikun,Ling Francis Chi-Chung
In the past few years, silane coupling agents are often used to modify the surface of silicon materials; however, researches in preparation of SiO X -based materials pyrolyzed from silane coupling agents are seldom reported. Hence, in order to prepare amorphous SiO X @C anodes for Li-ion storage, we adopted three kinds of silane coupling agents as organic silicon sources. The results show that silane coupling agents with vinyl group is the optimum organic silicon source. Owing to the strong chemical bonds of Si–O–C, amorphous SiO X particles are uniformly embedded in carbon matrix, forming monodisperse microbeads architecture with good buffer abilities. Therefore, the V-SiO X @C anodes derived from silane coupling agents with vinyl groups show good electrochemical performance, retaining a reversible discharge capacity of 940 mAh g −1 at a current density of 100 mA g −1 after 200 cycles, and it still depicts a good long-term cycling durability, maintaining 739 mAh g −1 at a current density of 400 mA g −1 after 400 cycles.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
·
锂离子电池
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）