INTERNATIONAL JOURNAL OF PHARMACEUTICS
·
2012
·
IF 3.35
Anning Wang,Hui Gao,Yanfang Sun,Yu-long Sun,Ying-Wei Yang,Guolin Wu,Yinong Wang,Yunge Fan,Jianbiao Ma
A series of temperature- and pH-responsive polyurethanes based on hexamethylene diisocyanate (HDI) and 4,4′-diphenylmethane diisocyanate (MDI) were synthesized by a coupling reaction with bis-1,4-(hydroxyethyl) piperazine (HEP), N -methyldiethanolamine (MDEA) and N -butyldiethanolamine (BDEA), respectively. The chemical structure , molecular weight, thermal property and crystallization properties were characterized by Fourier transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and X-ray diffraction (XRD) spectroscopy. The resulting polyurethanes were then used to prepare nanoparticles either by direct dispersion method or dialysis method. Their pH and temperature responsibilities were evaluated by optical transmittance and size measurement in aqueous media. Interestingly, HDI-based and MDI-based polyurethanes exhibited different pH and temperature responsive properties. Nanoparticles based on HDI-HEP and HDI-MDEA were temperature-responsive, while MDI-based biomaterials were not. All of them showed pH-sensitive behavior. The possible responsive mechanism was investigated by 1 H NMR spectroscopy. The cytotoxicity of the polyurethanes was evaluated using methylthiazoletetrazolium (MTT) assay in vitro . It was shown that the HDI-based polyurethanes were non-toxic, and could be applied to doxorubicin (DOX) encapsulation. The experimental results indicated that DOX could be efficiently encapsulated into polyurethane nanoparticles and uptaken by Huh-7 cells. The loaded DOX molecules could be released from the drug-loaded polyurethane nanoparticles upon pH and temperature changes, responsively.
研究领域:
生物材料学
·
药剂学
·
肿瘤学
·
高分子科学
·
纳米医学
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2014
·
IF 2.538
Xiuyong Chen,Jianhui Yuan,Jing Huang,Kun Ren,Yi Liu,Shaoyang Lu,Hua Li
This study aims to further enhance the anti-corrosion performances of Al coatings by constructing superhydrophobic surfaces. The Al coatings were initially arc-sprayed onto steel substrates, followed by deposition of polyurethane (PU)/nano-Al 2 O 3 composites by a suspension flame spraying process. Large-scale corrosion-resistant superhydrophobic PU/nano-Al 2 O 3 -Al coatings were successfully fabricated. The coatings showed tunable superhydrophilicity/superhydrophobicity as achieved by changing the concentration of PU in the starting suspension. The layer containing 2.0 wt.%PU displayed excellent hydrophobicity with the contact angle of ∼151° and the sliding angle of ∼6.5° for water droplets. The constructed superhydrophobic coatings showed markedly improved anti-corrosion performances as assessed by electrochemical corrosion testing carried out in 3.5 wt.% NaCl solution. The PU/nano-Al 2 O 3 -Al coatings with superhydrophobicity and competitive anti-corrosion performances could be potentially used as protective layers for marine infrastructures. This study presents a promising approach for fabricatiing superhydrophobic coatings for corrosion-resistant applications.
研究领域:
材料科学
·
表面工程
·
腐蚀与防护
·
海洋工程
·
高分子材料
·
金属涂层
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2019
·Vol. 136
·期 27
·47723
·
IF 2.188
Yayun Zheng,Yaofang Hu,Xing Yang,Meng Yuan,Jie Zhang,Yaodong Zhang,Jujie Luo
We synthesized novel polyurethane (PU) membranes from isophorone diisocyanate (IPDI), poly(ethylene glycol) (PEG) with a molecular weight of 2000, aminopropyl-terminated poly(dimethyl siloxane) (PDMS) with a molecular weight of 2000, and 1,4-butanediol (BDO) via a two-step polymerization. The structure of each synthesized membrane was studied through Fourier transform infrared spectroscopy and gel permeation chromatography. The effect of the thermal behavior was determined by differential scanning calorimetry and thermogravimetric analysis. The gas-permeability characteristics of the PU membranes were then tested for a single gas. The results show that the permeability of CO 2 ( P CO2 ) gradually increased with PDMS content. Among these PU membranes, PU-d (PEG/PDMS = 1:1, PEG/PDMS/IPDI/BDO = 1:3:2) showed the best P CO2 (132.6 Barrer) at 25°C and 1 bar pressure. The gas-permeability coefficients of each PU membrane at different operating temperatures were investigated, and the results show that P CO2 reached 302.6 Barrer at 65°C and 1 bar. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136 , 47723.
研究领域:
高分子材料科学
·
膜分离技术
·
气体分离
·
功能高分子
·
环境化工
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2019
·Vol. 43
·期 7
·3111-3118
·
IF 3.069
Lulu Pan,Jianfeng Ban,Li Ren,Zuocai Zhang,Qingyuan Peng,Shaorong Lu
This paper aims at elucidating the influence of liquid crystals (LCs) on the properties of shape memory polymers. A novel series of liquid crystalline shape memory polyurethanes, named LC-SF-SMPUs were successfully prepared by chemically cross-linking polyester sisal fibre cellulose (PSF) with polycaprolactone (PCL) and 4,4′-di(6-hydroxyhexyloxy)biphenyl (BP6). The effect of BP6 on the morphology and properties has been carefully investigated. The results show that the cross-linking structures provided a stable network, high elasticity and good thermal stability to the LC-SF-SMPUs, and demonstrate that the obtained LC-SF-SMPUs not only maintained the LC property of BP6, but also enhanced the intrinsic crystallization of PCL. Thus, the LC-SF-SMPUs showed excellent multi-shape memory properties with two crystalline transition temperatures. In the triple-shape memory effect of LC-SF-SMPUs, the first step of strain recovery is associated with the melting transition of the soft segment crystals of the polyurethane matrix, and the second step of strain recovery results from the melting transition of the LC mesogen. The strain fixity improved with increasing BP6-content, due to the enhanced crystallinity. However, the total strain recovery decreased as a result of the lubrication of the BP6 chains. This work demonstrates a new combination of LC properties and multi-shape memory properties, which makes it ideal for many potential applications in new smart devices.
研究领域:
高分子材料
·
智能材料
·
功能高分子
·
形状记忆聚合物
·
生物基材料
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS CHEMISTRY
·
2011
·Vol. 21
·期 18
·6569-6575
·
IF 5.101
Xintao Luo,Jishu Han,Yang Ning,Zhe Lin,Hao Zhang,Bai Yang
1-Thioglycerol (TG)-stabilized quantum dots (QDs) are good candidate for performing a stepwise polymerization reaction with polyurethane (PU) prepolymers, but their use is limited by their worse photoluminescence (PL) in comparison to QDs stabilized by other mercapto-ligands. To overcome this problem, TG-stabilized CdTe QDs with enhanced PL were synthesized in water through a N2H4-promoted growth approach. The current synthesis significantly shortened the duration of the size evolution of QDs, particularly for obtaining samples with orange and red emissions. It also permitted QD growth at low temperatures, such as room temperature, which avoided the decomposition of TG and subsequent embedment of sulfur into the QDs as occurs in the conventional synthesis. Most importantly, the TG ligand endowed the QDs with hydroxyl coverage, making the QDs miscible with PU prepolymers in dimethyl sulfoxide, and therefore overcoming the main problem in fabricating PU-based nanocomposites of eliminating water. The hydroxyl coverage further allowed for the linkage of PU on the surface of the QDs through the reaction between –OH and –NCO, producing CdTe QD–PU bulk nanocomposites. Systematic characterization indicated that the QDs were well dispersed in the PU medium, and the size-dependent PL of QDs was also maintained.
研究领域:
材料科学
·
纳米科技
·
高分子化学
·
光电子学
·
胶体与界面化学
✓ 已验证
DOI
高影响因子
POLYMERS FOR ADVANCED TECHNOLOGIES
·
2017
·Vol. 29
·期 1
·463-469
·
IF 1.907
Xiaoxia Jian,Yiwen Hu,Weiliang Zhou,Leqin Xiao
Tough and transparent polyurethane networks with self-healing capability at mild temperature conditions were successfully prepared in a 1-pot procedure. The self-healing ability of synthesized polyurethane comes from the covalent disulfide metathesis and non-covalent H-bonding. The mechanical testing indicates that disulfide metathesis reforms the covalent bonds on a longer time scale, while H-bonding gives rise to a healing efficiency of around 46% in the early healing processing. The compromise between mechanical performance and healing capability is reached by tailoring the concentration of disulfide. The tensile strength of the sample with 100% self-heal efficiency can get to 5.01 MPa, which can be explained by higher mobility of polymer chain under ambient temperature from creep testing.
研究领域:
高分子材料科学
·
功能材料
·
软物质物理
·
化学工程
·
纳米复合材料
✓ 已验证
DOI
高影响因子
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY
·
2019
·Vol. 57
·期 22
·2228-2234
·
IF 2.591
Changhong Lin,Dekun Sheng,Xiangdong Liu,Shaobin Xu,Fance Ji,Li Dong,Yan Zhou,Yuming Yang
A dual crosslinked self-healing polyurethane was prepared with robust mechanical properties through the dynamic reversible pyridine-Fe 3+ coordination bonds and Diels–Alder (DA) covalent bonds dual crosslinking strategy. Moreover, the mechanical properties and self-healing ability of polyurethane can be tuned readily by different ratio of the coordination bonds and DA bonds. Under external load, the coordination bonds serve as sacrificial bonds are broken to dissipate energy, the DA bonds can keep the shape of sample. With the coordination bonds participation, the damaged samples can be healed under moderate heating treatment or with the aid of FeCl 3 solution. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2228–2234
研究领域:
高分子化学
·
材料科学
·
自修复材料
·
功能高分子
·
智能材料
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 16
·13418-13425
·
IF 3.289
Fubin Luo,Kun Wu,Mangeng Lu
The influence of polybenzoxazine modified ammonium polyphosphate (BMAPP) on the thermal behavior and flame retardancy of a rigid polyurethane foam (PU) are investigated via thermogravimetric analysis (TG), TG coupled with infrared spectroscopy (TG-FTIR), UL-94 vertical burning testing and limit oxygen index (LOI). The TG testing results indicate that BMAPP can enhance the thermal stability of PU, both under air and nitrogen conditions. The initial degradation temperature of the BMAPP/PU composites is 264 °C in air, which is 22 °C and 30 °C higher than that of ammonium polyphosphate (APP)/PU composites and neat PU, respectively. The reason might be attributed to the better dispersion and compatibility of BMAPP particles in PU compared with APP, which can prevent the PU chain from degrading at low temperatures. The LOI value results demonstrate that BMAPP has higher flame retardancy in PU than APP. Residue analysis implies that polybenzoxazine is partially converted into Si–O as char residue during combustion.
研究领域:
高分子材料科学
·
阻燃材料
·
热功能材料
·
复合材料学
·
材料化学
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2016
·Vol. 133
·期 35
·
IF 1.866
Yuanzhu Long,Fuhua Sun,Chao Liu,Dong Huang,Xingyi Xie
To explore a new blowing agent for polyurethanes (PUs), palmitic acid was grafted onto a branched polyethyleneimine (bPEI; weight-average molecular weight = 25,000 Da) via N,N ′-carbonyldiimidazole condensation to form a hydrophobically modified bPEI [palmitic acid grafted branched polyethyleneimine (C 16 –bPEI)] with a grafting rate of 12%. A CO 2 adduct of C 16 –bPEI, which trapped 16.8% CO 2 in it, was synthesized from C 16 –bPEI. The long alkyl chain grafting improved the dispersibility of the CO 2 adduct in the PU raw materials and favored a homogeneous release of CO 2 to blow PUs during the exothermic foaming process. The preliminary results show that the foams possessed a density of 72.0 kg/m 3 and a compressive strength of 246 kPa; this matched the required values of foams for the thermal insulation of underground steel pipes. This new blowing agent emitted nothing but CO 2 to the atmosphere, so it will not promote ozone depletion and will avoid global warming problems that are associated with traditional blowing agents such as chlorofluorocarbons and hydrochloroflourocarbons. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133 , 43874.
研究领域:
高分子化学
·
材料科学
·
绿色化学
·
能源与环境材料
·
工业催化
✓ 已验证
DOI
高影响因子
MACROMOLECULAR RAPID COMMUNICATIONS
·
2021
·Vol. 42
·期 22
·2100457
·
IF 5.734
Xiaobin Li,Ending Zhang,Jun Shi,Xiaoyan Xiong,Jiaming Lin,Qiang Zhang,Xiaohua Cui,Liqin Tan,Kun Wu
In the past two decades, ionic conductive hydrogel has attracted tremendous research interests for their intrinsic characteristics in the field of flexible sensor. However, synchronous achievement of high mechanical strength, satisfied ionic conductivity, and broad adhesion to various substrates is still a challenge. Herein, a novel zwitterionic composite hydrogel that displayed excited strechability (up to 900%), satisfied strength (about 30 kPa), high ionic conductivity (1.2 mS cm −1 ), and adhesion to polar and nonpolar materials is fabricated though the combination of waterborne polyurethanes (PU) and poly(sulfobetaine zwitterion- co -acrylamide) (SAm). Especially, this facile strategy demonstrates that PU has a synergistic effect on enhancing mechanical strength and ionic conductivity for ionic conductive hydrogel. Moreover, the hydrogel-based strain/stress sensor shows high sensitivity, wide sensing range, great stability, and accuracy for human body movements detecting and voice recognition. This novel ionic conductive hydrogel has promoted the development of wearable devices.
研究领域:
生物材料
·
高分子科学
·
柔性电子学
·
生物医学工程
·
传感器技术
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2018
·Vol. 43
·期 1
·103-110
·
IF 3.201
Funian Mo,Jianfeng Ban,Lulu Pan,Bo Shi,Shaorong Lu
In this study, a novel series of supramolecular liquid crystalline (LC) polyurethane composites, named SMPU–#HOBA (# represents the molar ratio of HOBA/BINA), were successfully prepared by incorporating hexadecyloxybenzoic acid (HOBA) into pyridine-containing polyurethane (PU). The effect of HOBA on the structure, morphology, and properties has been carefully investigated. The results demonstrate that the obtained SMPU–#HOBA composites not only maintained the LC property of the HOBA mesogen, but also enhanced the intrinsic crystallization of the soft segment phase. Thus, the composites showed an excellent multi-shape memory property with two crystalline temperatures. Moreover, self-gripping was demonstrated revealing reversible bidirectional shape memory by virtue of molecular flipping and movement of the hard segment domain. These composites display a rare combination of LC properties, multi-shape memory properties, and reversible bidirectional shape memory properties, which makes them ideal for many potential applications in smart temperature sensitive devices.
研究领域:
高分子科学
·
材料科学
·
智能材料
·
软物质物理
·
功能高分子
✓ 已验证
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2019
·
IF 3.42
Youtong Wu,Shaoguo Wen,Kaiming Chen,Jihu Wang,Guangyu Wang,Kai Sun
Compared with solvent-based resins, waterborne resins still have defects such as insufficient anti-corrosion efficiency. In this paper, the sulfonated graphene/zinc phosphate composites were prepared as an anti-corrosion filler and doped into waterborne polyurethane resin. The morphology of composites is different from pure zinc phosphate. The optimal corrosion resistance can be obtained by adding 0.5 wt% sulfonated graphene/zinc phosphate fillers characterized by Potentiodynamic polarization curves and EIS analysis The corrosion current density ( i corr ) was 0.4252 μA/cm 2 and the charged transfer resistance (R ct ) was up to 10.937 × 10 3 Ω cm 2 , which show a good potential as anti-corrosive fillers in waterborne coatings system.
研究领域:
材料科学
·
高分子化学
·
表面工程
·
腐蚀与防护
·
涂层技术
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）