DALTON TRANSACTIONS
·
2018
·Vol. 47
·期 26
·8697-8705
·
IF 4.099
Yang Ding,Jie Liu,Ming Zeng,Xishu Wang,Junli Shi,Weili Wang,Yanru Miao,Xibin Yu
Rare earth (RE3+)-doped NaY(MoO4)2 nanocrystals are efficient materials for realizing multicolor emission, which plays an important role in displays, W-LEDs, solar cells and biolabeling. Up to now, research on the multicolor tuning properties of RE3+-doped NaY(MoO4)2 nanoparticles has mostly focused on traditional preparation routes such as the hydrothermal method and sol–gel process. However, the products obtained using these methods are usually large in size (on the micron/submicron scale) and agglomeration problems are inevitable. With the development of nano optoelectronic devices and bioluminescence labeling, there is an urgent need to find an efficient method to prepare nanoscale, monodispersed and NaY(MoO4)2:RE3+ nanocrystals (NCs) with good crystallinity and stronger emission properties. In this work, we demonstrate a simple, fast, reproducible and one-step synthesis of NaY(MoO4)2:Eu3+ NCs with sizes varying from 1–20 nm via a ligand-assisted reprecipitation strategy. The reaction mechanism and emission intensities of NaY(MoO4)2:Eu3+ NCs with various morphologies have been discussed in detail. Furthermore, Tb3+ and Eu3+ ion co-doped NaY(MoO4)2 NCs were also prepared, and various emission colors were obtained and tuned from red, orange-red, yellow and yellow-green to green. Energy transfer between the Tb3+ and Eu3+ ions in the NaY(MoO4)2 host matrix has also been demonstrated. Finally, a highly efficient and stable NaY(MoO4)2:0.05Tb,0.04Eu NC-based W-LED device was built, which indicates the promising future application for this material in the field of lighting. The tunable multicolour emission, ease of preparation and nanosize reveal that NaY(MoO4)2:RE3+ NCs have a potential application in full color displays and W-LEDs.
研究领域:
材料科学
·
纳米技术
·
光学材料
·
无机化学
·
光电子学
✓ 已验证
DOI
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2022
·
IF 3.428
Baoqin Mu,Bin Li,Bin Qi
Lanthanide metal–organic framework Ln-MOFs(Ln = Sm, Dy, Dy/Sm) were synthesized by hydrothermal method at 100 °C for 12 h using lanthanide metals (Ln = Sm, Dy, Dy/Sm) as metal ion centers and 1,3,5-benzotrioic acid (H 3 BTC) as ligands. The structural characteristics of Ln(BTC)(H 2 O)·(DMF) were characterized by X-ray Diffraction(XRD), Fourier Transform Infrared Spectroscopy(FT-IR) and Thermogravimetric Analysis(TGA). Scanning electron microscopy showed that the samples showed rod-like morphology, and the fluorescence spectra showed 478 nm and 573 nm corresponding to the characteristic transitions of 4 F 9/2 → 6 H 15/2 (blue light) and 4 F 9/2 → 6 H 13/2 (yellow light) of Dy 3+ , respectively, while orange light at 600 nm and red light at 646 nm corresponded to the characteristic transitions of 4 G 5/2 → 6 H 7/2 and 4 G 5/2 → 6 H 9/2 of Sm 3+ , demonstrating that the double-doped lanthanide metal ions MOF were successfully synthesized. H 7 (P(Mo 2 O 7 ) 6 )/(Dy/Sm-MOF) was used as a sensor for the determination of H 2 PO 4 − , the results of performance evaluation showed that the electrochemical sensor showed a linear relationship between 0.01 and 0.17 mM for H 2 PO 4 − , with a detection limit of 0.005 mM/L, good stability and reproducibility, which opened up a new way for the detection of orthophosphate dihydrogen.
研究领域:
分析化学
·
材料科学
·
电化学
·
无机化学
·
传感器技术
✓ 已验证
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2017
·
IF 6.065
Jianxian Zeng,Zhihui Dong,Zhe Zhang,Yuan Liu
A surface-grafted imprinted ceramic membrane (IIP-PVI/CM) for recognizing molybdate (Mo(VI)) anion was prepared by surface-initiated graft-polymerization. Firstly, raw alumina ceramic membrane (CM) was deposited with SiO 2 active layer by situ hydrolysis deposition method. Subsequently, γ-methacryloxy propyl trimethoxyl silane (MPS) was used as a coupling agent to introduce double bonds onto the SiO 2 layer (MPS-CM). Then, 1-vinylimidazole (VI) was employed as a functional monomer to graft-polymerization onto the MPS-CM (PVI-CM). During the graft-polymerization, the influence factors of grafting degree of PVI were investigated in detail. Under optimum conditions (monomer concentration 20 wt%, temperature 70 °C, initiator amount 1.1 wt% and reaction time 8 h), the grafting degree of 20.39 g/100 g was obtained. Further, Mo(VI) anion was used as a template to imprint in the PVI-CM by employing 1,6-dibromohexane as a cross-linking agent, and then Mo(VI) was removed, obtaining the IIP-PVI/CM with many imprinted cavities for Mo(VI). Thereafter, static adsorption and dynamic separation properties of IIP-PVI/CM for Mo(VI) were studied. Results indicate that IIP-PVI/CM shows a specific selectivity for Mo(VI) with the adsorption capacity of 0.69 mmol/100 g, and the selectivity coefficient of IIP-PVI/CM is 7.48 for molybdate to tungstate anions. During the dynamic separation, IIP-PVI/CM has also good selectivity for separation of Mo(VI) and W(VI) anions.
研究领域:
环境化学
·
材料科学
·
分离科学
·
高分子化学
·
无机分析化学
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2014
·
IF 6.007
Xu Yan,Xiyou Wang,Wei Gu,MiaoMiao Wu,Yan Yan,Bo Hu,Guangbo Che,Donglai Han,Jinghai Yang,Weiqiang Fan,Weidong Shi
Single-crystalline AgIn(MoO 4 ) 2 nanosheets have been successfully fabricated by facile hydrothermal method without any surfactants. Subsequently, Ag/AgBr-grafted AgIn(MoO 4 ) 2 nanosheets were synthesized by the in situ photoreduction of AgBr/AgIn(MoO 4 ) 2 composites prepared by a deposition–precipitation method. Under visible light irradiation. The Ag/AgBr/AgIn(MoO 4 ) 2 composites exhibit a strong absorbance in the visible region because of the surface plasmon resonance absorption of Ag nanocrystals. Compared with bare AgIn(MoO 4 ) 2 nanosheets, Ag/AgBr nanoparticles and Ag/AgIn(MoO 4 ) 2 composites, a dramatic enhancement in the degradation rate of tetracycline (TC) is observed over the Ag/AgBr/AgIn(MoO 4 ) 2 composites. The immense enhancement of the photocatalytic activity is attributed to the extended absorption in the visible-light region, effective charge separation, and synergistic enhancement induced by surface plasmon resonance (SPR) in the heterostructured Ag/AgBr/AgIn(MoO 4 ) 2 . This study provides new insight into the fabrication of highly efficient and stable ternary metal molybdate based plasmonic photocatalysts and facilitates their practical application to solve environmental issues. The mechanism for the photodegradation of TC over Ag/AgBr/AgIn(MoO 4 ) 2 is discussed in detail.
研究领域:
材料科学
·
环境化学
·
光催化
·
纳米材料
·
无机化学
·
物理化学
✓ 已验证
DOI
高影响因子
Materials
·
2023
·Vol. 16
·期 17
·5773
·
IF 3.4
Cunao Feng,Yu Guo,Xiaowei Li,Yang Cao,Qiuxue Kuang,Minghui Zhang,Dekun Zhang
The roller is an important part of the belt conveyor used in coal transportation. Due to the harsh environment of coal mines, the rollers are in a state of high load and high friction for a long time, which causes wear failure and has a serious impact on the reliability and safety of the equipment. In order to prepare roller material with excellent bearing performance and friction performance, CF/PUE composites were prepared by pouring method with polyurethane as the matrix and carbon fiber as reinforcement. Due to the low surface activity of unmodified carbon fibers and poor bonding performance with the matrix, MoS2was generated on the surface of carbon fiber by the in situ generation method in this paper. It was found that the mechanical properties of MoS2/CF/PUE composites were better when the CF content was 0.3 wt%. The Shore hardness reached 92.2 HA, which is 10% higher than pure polyurethane. The tensile strength was 38.44 MPa, which is 53% higher than pure polyurethane. The elongation at break was 850%, which is 16% higher than pure polyurethane. The maximum compressive stress was 2.32 MPa, which is 42% higher than pure polyurethane. The friction coefficient was much lower than that of pure PUE composites, the friction coefficient was 0.284, which is 59% lower than pure polyurethane.Keywords:PUE;CF;MoS2;mechanical properties;friction performance
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2020
·
IF 4.65
Jixing Chai,Junye Cheng,Deqing Zhang,Yingfei Xiong,Xiuying Yang,Xuewei Ba,Sana Ullah,Guangping Zheng,Ming Yan,Maosheng Cao
The 2D molybdenum disulfide nanosheets (MoS 2 -NS) has exhibited great potential in electromagnetic wave absorbing (EMA) due to larger surface area and peculiar electronic properties. However, due to the poor impedance matching and limited electromagnetic loss capability of pure MoS 2 -NS, its practical applications are significantly challenging. Herein, we firstly implanted Co 3 O 4 nanoparticles (Co 3 O 4 -NPS) on MoS 2 -NS by a facile hydrothermal method to improve the EMA performance. The resulting MoS 2 /Co 3 O 4 hybrids exhibit the minimum reflection loss (RL) value of −43.56 dB at 6.96 GHz with 20 wt% Co 3 O 4 loading under the samples thickness of 4.0 mm. The widest bandwidth with the RL value less than −10 dB of MoS 2 /Co 3 O 4 hybrids was determined to be 4.76 GHz (13.24 to 18 GHz) under the absorber thickness of 2.0 mm. The excellent performance is ascribed to that implanted Co 3 O 4 -NPS on MoS 2 -NS could turn tuning impedance matching and improving synergetic magnetic loss and dielectric loss. Herein, this work not only presents a facile strategy of achieving high-performance MoS 2 -based EMA materials, but also provides important implications for designing the other EMA materials.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2021
·
IF 4.527
Wenfei Liang,Linping Zhong,Lijun Quan,Xuejia Wang,Mengjiao Liu,Xin Lai,Jian Bi,Daojiang Gao,Xiaohong Liu,Wei Zhang,Yan Zhao
Transition metal oxides (TMOs) based compounds are recognized as high-energy anodes in next-generation lithium-ion batteries (LIBs) due to their extremely high theoretical capacity. However, the lower intrinsic conductivity , fast fading cyclic stability and dramatic volume expansion during discharge/charge processes greatly hinder the practical application of TMOs as anodes in LIBs. In this study, we have designed and constructed MoO 3 /ZnCo 2 O 4 QDs@C@rGO/MoO 3 (denoted as GMZCO) sandwich-structured hybrid nanocomposites via an effective route, and have proposed the formation mechanism of this unique nanostructured composite on the basis of the systematic results of the microstructures. Due to the unique sandwich structure and the synergistic enhancement effect of the ZnCo 2 O 4 QDs , α-MoO 3 and rGO, the as-constructed GMZCO exhibits the superior electrochemical performances when used as anode for LIBs. The obtained GMZCO can maintain high capacity of 1281 mAh g −1 at 0.2 A g −1 after 300 cycles, and can deliver as high as specific capacity of 913 mAh g −1 at 1 A g −1 after 500 cycles, revealing the higher capacity and excellent cyclic stability. What deserves to be mentioned most is that GMZCO can keep a capacity of 541 mAh g −1 after 1400 cycles even at higher current density of 3 A g −1 , having outstanding rate capability. This work paves a novel approach for design TMOs with unique microstructures as a promising anode for the high-performances LIBs.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2019
·Vol. 7
·期 6
·2780-2786
·
IF 10.733
Zhen Zhang,Ping Li,Qi Wang,Qi Feng,Youkun Tao,Jiaoyan Xu,Cheng Jiang,Xiner Lu,Jiantao Fan,Meng Gu,Hui Li,Haijiang Wang
As a cheaper Pt-group metal, ruthenium (Ru) is a highly competitive alternative to Pt for commercialization towards the hydrogen evolution reaction (HER). Herein, we report the modulation effect on the Gibbs free energy (ΔGH*) of hexagonal-close-packed (hcp) Ru resulting from heteroatom Mo doping. In particular, for the first time the hcp MoRu3 crystal structure is theoretically predicted with pretty high intrinsic HER activity. Meanwhile, the Mo hetero-dopant could act as a new active site with Pt-like ΔGH*. Motivated by the prediction, we report a novel metal organic framework (MOF)-assisted synthetic strategy to prepare a Mo-doped hcp Ru electrocatalyst. Accordingly, the hcp MoRu3 catalyst exhibits an ultralow overpotential of 30.5 mV at 10 mA cm−2, ensuring excellent Pt-like intrinsic HER activity. More importantly, the excellent electrochemical performance measured with a proton exchange membrane (PEM) electrolyzer further highlights the promising potential of the hcp MoRu3 catalyst for hydrogen production.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2019
·Vol. 9
·期 26
·15033-15041
·
IF 3.049
Ya Gao,Yongjie Zheng,Jixing Chai,Jingzhi Tian,Tao Jing,Deqing Zhang,Junye Cheng,Huiqing Peng,Bin Liu,Guangping Zheng
Effective separation and rapid transfer of photogenerated electron–hole pairs are key features of photocatalytic materials with high catalytic activity, which could be achieved in co-catalysts. It is reported that the two-dimensional (2D) MoS2 is a promising co-catalyst due to its unique semi-conductive properties and graphene-like layered structure. However, the application of MoS2 as a co-catalyst is limited by its poor electrical conductivity. On the other hand, it is worth noting that TiO2 possesses reactive crystal facets, which is one of the dominant mechanisms for the separation of photogenerated electron–hole pairs. In this work, we prepared MoS2/RGO hybrids as co-catalysts which were doped to TiO2 with highly reactive {001} planes via the hydrothermal method. It was found that the {001}-TiO2/MoS2/RGO photocatalysts with 7 wt% MoS2/RGO co-catalyst show the highest photodegradation activity for the degradation of Rh B under visible light irradiation (λ > 400 nm), which could result from the synergy of the effective separation of electron–hole pairs by the {001} facets in TiO2 and the rapid transfer of electron–hole pairs in MoS2/RGO. The results show that the {001}-TiO2/MoS2/RGO hybrid is a low-cost and stable photocatalyst for the effective degradation of Rh B under visible light.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2019
·
IF 8.456
Wenfei Liang,Shenglan He,Lijun Quan,Li Wang,Mengjiao Liu,Yan Zhao,Xin Lai,Jian Bi,Daojiang Gao,Wei Zhang
CoMoO4 has gained great attention as an anode material for lithium-ion batteries owing to its high theoretical capacity of 980 mAh g–1 and relatively high electrochemical activity. Unfortunately, CoMoO4 anode also has some drawbacks such as low electronic/ionic conductivity, inferior cyclic stability, and relative severe volumetric expansion during the lithiation/delithiation process, greatly inhibiting its further development and application. Herein, we report Co0.8Zn0.2MoO4/C nanosheet composite constructed via a novel and facile one-stone-three-birds strategy. The preparation of the Co0.8Zn0.2MoO4/C nanosheet is based on the following two-step process: the formation of Co/Zn nanosheet precursors derived from Co/Zn-ZIF rhombic dodecahedra via solvothermal pretreatment, followed by a calcination treatment with molybdic acid (H2MoO4) in air. The as-prepared Co0.8Zn0.2MoO4/C is monoclinic crystal structured composite with the in situ formed active carbon, which is well-defined nanosheet with a rough surface and mean thickness of 60–70 nm for a single sheet. This Co0.8Zn0.2MoO4/C nanosheet composite possesses a larger surface area of 37.60 m2 g–1, showing a mesoporous structure. When used as anode materials, the as-obtained Co0.8Zn0.2MoO4/C composite can deliver as high as a discharge capacity of 1337 mAh g–1 after 300 cycles at 0.2C and still retain the capacity of 827 mAh g–1 even after 600 cycles at 1C, exhibiting outstanding lithium storage performances. The higher capacity and superior cyclic stability of the Co0.8Zn0.2MoO4/C composite should be ascribed to the synergistic effect of the substitution of Zn2+, in situ composited active carbon and the as-constructed unique microstructure for the Co0.8Zn0.2MoO4/C composite. Our present work provides a facile one-stone-three-birds strategy to effectively construct the architectures and significantly enhance electrochemical performances for other transition metal electrode materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ELECTROCHIMICA ACTA
·
2018
·
IF 5.116
Ling Li,Xue Zhang,Dongyang Wang,Wenming Zhang,Xiaowei Li,Xiaohui Zhao,Qinghua Zhang,Lin Gu,Ze Yu,Mingxing Wu
Molybdenum sulfide/carbon nanofibers (MoS 2 /CNFs) composite with high density of flower-like nanosheets are prepared via the combination of electrospinning technology and hydrothermal method . The MoS 2 /CNFs composite exhibits good performance as a counter electrode (CE) in dye-sensitized solar cells (DSSCs). The DSSCs employing MoS 2 /CNFs delivers a power conversion efficiency (PCE) of 8.46%, which is higher than that of the devices with CNFs CE (6.59%) and platinum CE (7.65%) under the same conditions. Thus, the excellent stability and facile preparation of the MoS 2 /CNFs electrode provide precondition for DSSCs application, while greatly enhancing the electrocatalytic activities of the DSSCs.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2018
·
IF 4.439
Deqing Zhang,Jixing Chai,Junye Cheng,Yixuan Jia,Xiuying Yang,Hao Wang,Zhenlong Zhao,Chen Han,Guangcun Shan,Wenjun Zhang,Guangping Zheng,Maosheng Cao
The two-dimensional (2D) transition metal dichalcogenide, molybdenum disulfide (MoS 2 ), has been demonstrated to be a new class of microwave absorption (MA) material due to its high specific surface area and peculiar electronic properties. However, its limited MA capacity and bandwidth require further improvement. MoS 2 /RGO composites with improved MA performance have been reported, but the complicated and inefficient preparation process also limits the application of MoS 2 /RGO composites. In this work, we prepare MoS 2 /RGO hetero-structure hybrid with excellent MA performance and broadened bandwidth by a facile one-step hydrothermal method. It is found that the highest reflection loss value of the sample-wax containing 40% MoS 2 /RGO is −49.41 dB at a thickness of 2.52 mm, and the bandwidth of RL values less than −10 dB can reach up to 13.36 GHz (from 4.64 to 18 GHz). Meanwhile, we investigate another strategy to prepare MoS 2 /Fe 3 O 4 hybrid with hetero-structures and their MA performance is studied for the first time. It is found that the highest reflection loss value of sample-wax containing 40% MoS 2 /Fe 3 O 4 is −42.57 dB at a thickness of 3.25 mm, and the bandwidth of RL values less than −10 dB can reach up to 12.73 GHz (from 5.27 to 18 GHz). Results obtained in this study open a new window for designing excellent MA materials for practical applications.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）