International Journal of Minerals Metallurgy and Materials
·
2024
·Vol. 32
·期 1
·169-181
·
IF 5.6
Li Haixu,He Haobo,Jiang Tiannan,Du Yunfei,Wu Zhichen,Xu Liang,Wang Xinjie,Liu Xiaoguang,Yu Wanhua,Xue Wendong
S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800°C at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate (PMS) for methylene blue (MB) degradation. The effects of two different mixing routes were identified on the MB degradation performance. Particularly, the catalyst obtained by the alcohol solvent evaporation (MOF-AEP) mixing route could degrade 95.60% MB (50 mg/L) within 4 min (degradation rate: K = 0.78 min −1 ), which was faster than that derived from the direct grinding method (MOF-DGP, 80.97%, K = 0.39 min −1 ). X-ray photoelectron spectroscopy revealed that the Co–S content of MOF-AEP (43.39at%) was less than that of MOF-DGP (54.73at%), and the proportion of C–S–C in MOF-AEP (13.56at%) was higher than that of MOF-DGP (10.67at%). Density functional theory calculations revealed that the adsorption energy of Co for PMS was −2.94 eV when sulfur was doped as C–S–C on the carbon skeleton, which was higher than that when sulfur was doped next to cobalt in the form of Co–S bond (−2.86 eV). Thus, the C–S–C sites might provide more contributions to activate PMS compared with Co–S. Furthermore, the degradation parameters, including pH and MOF-AEP dosage, were investigated. Finally, radical quenching experiments and electron paramagnetic resonance (EPR) measurements revealed that 1 O 2 might be the primary catalytic species, whereas ·O 2− might be the secondary one in degrading MB.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2022
·
IF 7.139
Jianhua Yu,Xiancai Pang,Qunchao Yin,Di Chen,Hongzhou Dong,Qian Zhang,Jing Sui,Lina Sui,Lifeng Dong
Constructing self-supporting porous electrode material with abundant electrochemical active sites can effectively improve the energy storage capacity of supercapacitors . Herein, a novel electrode material (NCS@Co-ZIF/NF) is developed by depositing zeolitic imidazolate frameworks (Co-ZIF) on nickel foams (NF), which is adopted as a precursor (Co-ZIF/NF) to electrodeposit nickel-cobalt sulfides (NCS). The nanosheet arrays with cross-porous structures provide NCS@Co-ZIF/NF with excellent electrochemical characteristics, including a high specific capacity of 144.4 mAh g −1 at the current density of 1 mA cm −2 , 60.5% capacity retention at 50 mA cm −2 , and superb long-term cycle stability. Furthermore, NCS@Co-ZIF/NF//AC hybrid supercapacitor is fabricated by using NCS@Co-ZIF/NF as positive electrodes and activated carbon (AC) as negative electrodes , which exhibits a high energy density of 33.9 Wh kg −1 at a power density of 145 W kg −1 .
✓ 已验证
DOI
高影响因子
Journal of Energy Storage
·
2021
·
IF 6.583
Jie Xu,Cuili Xiang,Songwen Fang,Luping Zhu,Fen Xu,Lixian Sun,Yongjin Zou,Jian Zhang
Supercapacitors, such as pseudocapacitors (PCs), are widely used because of their excellent electrochemical activity and capacitance; however, it is still challenging to fabricate PCs with high stability and good electrochemical properties. Therefore, suitable templates and transition metal composite materials should be selected for improving their performance. Binary transition metal sulfides exhibit excellent electrochemical performance owing to their rich valence, electrical conductivity, and abundant electrochemical active sites. In this study, we prepared porous Mn-Co-S nanospheres (MCSN) via the hydrothermal method using silica colloidal particles was as the template; to the best of our knowledge, this is the first study to synthesize MCSN. Results suggest that the MCSN composite exhibited excellent conductivity and enhanced stability owing to the porous structure formed by the vertical growth of MnS 2 -CoS 2 nanosheets on silica nanoparticles. The porous MCSN electrode showed an excellent specific capacitance of 1158 F g −1 at 1 A g −1 . Moreover, when coupled with an activated carbon (AC) positive electrode, the supercapacitor of MCSN//AC exhibited stability of 90.4% after 5000 cycles at 10 A g −1 (the specific energy of 34 W h kg −1 at 775 W kg −1 ). Given the results, we believe that the prepared MCSN material has potential application prospects for high-efficiency supercapacitors.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Dongdong Xu,Zhigao Xue,Lei Han,Kai Tao
Bimetallic sulfides with superior electrochemical activity are extensively explored as electrode materials for electrochemical energy related applications. However, their utilizations are impeded due to unfavorable faradaic reaction kinetics and poor electrochemical stability. To overcome these defects, this study reports interface engineering of heterogeneous nanosheet arrays on Ni foam (NF) through surface modification of metal-organic framework (MOF)-derived zinc cobalt sulfide (Zn/Co-S) with CeO 2 nanoparticles (NPs). MOF-derived porous Zn/Co-S nanosheets have highly exposed electrochemical active sites and abundant channels for charge transport. The strong interfacial coupling between Zn/Co-S and defective CeO 2 leads to fast charge transfer, thereby improving electrochemical activity. The CeO 2 can also prevent Zn/Co-S from degrading in KOH solution. Moreover, the self-supported electrode shows high electronic conductivity and strong adhesion with the conductive substrate. Therefore, the specific capacity and electrochemical stability of resulting Zn/Co-S@CeO 2 /NF are significantly higher compared with Zn/Co-S/NF. Furthermore, an asymmetric supercapacitor (ASC) based on Zn/Co-S@CeO 2 /NF and activated carbon (AC) exhibits high energy storage capability (42.4 Wh kg −1 ) and outstanding operating durability (91.1 % after 8000 cycles). These results demonstrate that the as-prepared electrode is a superior candidate for electrochemical devices .
✓ 已验证
产品关联
DOI
高影响因子
ENERGY & FUELS
·
2021
·
IF 3.605
Zhihui Xu,Xuelei Li,Shishuai Sun,Zepeng Wei,Hongguo Li,Shougen Yin
The synergistic effect of the electrochemical double-layer and pseudocapacitance electrode materials has been extensively used to improve the performance of composite electrodes for supercapacitors (SCs). However, the energy density of SCs is still unsatisfactory for practical utilization. Herein, a C-NiCo2O4/C@Ni–Co–S electrode is ingeniously devised through coupling the interior of 0D/2D carbon-modified NiCo2O4 and the external sheath of Ni–Co–S nanosheets. The 0D carbon quantum dot doping can effectively avoid the agglomeration of NiCo2O4 nanoparticles and improve the electronic conductivity. 2D carbon as the intermediate layer can ameliorate the physical/chemical stability of the electrode. Ni–Co–S nanosheets can improve the area-specific capacitance of the electrode and thus enhance the energy density of the device. As expected, the C-NiCo2O4/C@Ni–Co–S electrode delivers an outstanding specific capacitance of 2396 F g–1 (7.9 F cm–2) at 3 A g–1 and excellent cycling stability (92% after 10 000 cycles). Furthermore, a quasi-solid-state asymmetric supercapacitor (ASC) using C-NiCo2O4/C@Ni–Co–S as positive electrode and active carbon (AC) as negative electrode exhibits a high energy density of 95 Wh kg–1 at 0.9 kW kg–1 and an excellent cycle performance. Our work reveals that this reasonable structure design is very effective for achieving a high-performance positive electrode for practical SC applications.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2024
·Vol. 12
·期 48
·33917-33925
·
IF 10.7
Yi Ma,Luming Li,Jialing Tang,Zongkun Hu,Yong Zhang,Huan Ge,Ning Jian,Jun Zhao,Andreu Cabot,Junshan Li
Plastics have become an integral part of modern society due to their excellent mechanical properties, light weight, chemical stability and low cost. However, their continuous production and use worldwide have resulted in a major environmental problem. In this context, the green degradation and upcycling of waste plastics using electrochemical oxidation present a promising solution. To make this solution practical, the development of cost-effective catalysts optimized for this reaction is essential. In this study, we propose a new catalyst for the electrocatalytic reforming of ethylene glycol (EG) derived from polyethylene terephthalate (PET) to formic acid. The catalyst comprises layered Ni–Co9S8 nanosheet arrays (NSAs) grown on nickel foam (NF) via the hydrothermal method. Under EG oxidation reaction (EGOR) conditions, the Ni–Co9S8 NSAs/NF catalyst achieves Faraday efficiencies (FEs) of up to 92%. Additionally, the direct use of commercial PET plastic powder hydrolysate still enables formate FEs to exceed 90%. These outstanding results are rationalized using density functional theory (DFT) calculations providing insights into the role of the different elements in the EGOR. Overall, this study demonstrates both a synthetic strategy for transition metal sulfides and an efficient and sustainable strategy for the upgraded recycling of PET plastics.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2020
·
IF 4.939
Ling Wang,Wenzong Liu,Thangavel Sangeetha,Zechong Guo,Zhangwei He,Chuan Chen,Lei Gao,Aijie Wang
High overpotential and soaring prices of the cathode electrode are the bottlenecks for the development of microbial electrolysis technology for hydrogen production . In this study, a novel one-step electrodeposition method has been attempted to fabricate electrodeposited cathodes in situ growth of Ni–Co–S, Ni–S, Co–S catalyst on nickel foam (NF) to reduce the overpotential of electrodes. Finally, a uniform nanosheet with a high specific surface area and more active sites is formed on the NF surface, resulting in a lower overpotential than plain NF. At 0.8 V, the Co–S/NF cathode produces a favorable 42% increase in hydrogen yield (0.68 m 3 ·m −3 ·d −1 ), 40% upsurge in current density (10.6 mA/cm 3 ) and 39% rise of cathodic recovery rate (58.0 ± 3.2%) than bare NF, followed by Ni–Co–S/NF and Ni–S/NF cathode. All the electrodeposited electrodes demonstrate enhanced current density and reduced electron losses, thereby achieving efficient hydrogen production . These innovative varieties of electrodes are highly advantageous as they are relatively inexpensive and easy to manufacture with great potential in reducing costs and further real time application in large scale.
✓ 已验证
DOI
高影响因子
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
·
2022
·Vol. 24
·期 18
·10838-10850
·
IF 3.945
Wei Deng,Yuping Gai,Haitao Duan,Zhide Chen,Xiaojun Hu,Sheng Han,Niwei Xu,Shanlin Qiao,Zijian Yao,Fei Jiang
Although reasonably specified and adjustable preparation of nanostructures with specific morphologies, ordered chemical compositions and electronic structures involving advanced energy chemistries is an important research area, high-efficiency, stable, and low-cost electrocatalysts for water splitting are greatly desirable and challenging. In this study, partially delocalized Co–S–Se ultra-thin nanosheets are obtained via a liquid–liquid interface-mediated strategy at an oil–water interface. These Co–S–Se ultra-thin nanosheets exhibit different-sized lamellar structures and have an average thickness of 0.83 nm. The ternary ultra-thin Co0.45S0.38Se0.17 nanosheets demonstrate excellent performance for the OER, accompanied by an overpotential of 290 mV (1.52 V vs. RHE) at 10 mA cm−2, and a Tafel slope of 74.5 mV dec−1. In the meantime, the catalyst recombined with a stoichiometry NiOx catalyst to form a composite interface, which also exhibited a good OER performance, with an overpotential of 260 mV at 10 mA cm−2 and a smaller Tafel slope of 53.9 mV dec−1. The nanosheets can rearrange the electronic density near the metal catalytic centers and increase the electron transfer. DFT calculations indicate that the partially delocalized charges can improve electrocatalytic performances, demonstrating modulated electroreduction properties. Due to the special atomic and electronic structure of the ternary transition metal alloy chalcogenide, the compound has great potential for energy storage, which will help in the rational design and synthesis of high-efficiency electrocatalysts.
✓ 已验证
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·Vol. 14
·期 1
·120662
·
IF 7.2
Bin Ou,Hongwei Rong,Baihui Cui,Jie Zhang,Fang Zhang,Dabin Guo
The coordination calcination method is used to form a coordination complex between Co 2 + and thiophene, which is adsorbed on carbon black (CB) and then calcined to prepare Co-S-C/CB single atom catalyst. Co-S-C/CB could efficiently activate peroxymonosulfate (PMS) by forming Co-S 3 coordination structure and Co-S 3 is the active site for activating PMS. Electron rich region was formed on the Co atom and the Co atom could keep in a low valence state during the catalytic process and donate electrons to PMS to produce radicals (•OH and SO 4 •- ) through a single-electron-reduction. Co-S-C/CB could not only promote PMS to generate •OH and SO 4 •- , but also inhibit the generation of 1 O 2 and O 2 •- . The radical pathway has the lowest Gibbs free energy (ΔG) compared to the 1 O 2 pathway and the Co(IV)=O pathway. Therefore, Co-S-C/CB could regulate the radical pathway of PMS. •OH and SO 4 •- are mainly responsible for the removal of Rhodamine B (RhB). Co-S-C/CB could be applied to efficiently degrade various organic pollutants and has good stability. Macro preparation of Co-S-C/CB could be achieved from both the preparation process and raw material aspects.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2026
·
IF 4.8
Shengnan Xu,Yu Yu,Fuxin Wang,Jiande Hu,Zixiang Li,Guojun Lv
Cobalt-doped zeolite catalysts have been identified as a potentially viable non-precious metal alternative for toluene oxidation, exhibiting characteristics reminiscent of noble metals, such as the ability to activate C-H bonds, abundance, and minimal adverse environmental impact. However, the catalytic activity is greatly reliant on the diversity of cobalt species embedded within the zeolite framework. To address this, a ligand-engineering strategy was utilized to precisely control the coordination environment of the cobalt precursor, thereby regulating the resulting cobalt species and accordingly the catalytic activity of cobalt-doped zeolite catalysts. Four distinct Co@S-1 zeolites were synthesized with disparate ligands including ethylenediamine, water, ammonia water and acetylacetone, and meanwhile applied as heterogeneous catalysts for the selective oxidation of toluene with molecular oxygen as oxidant. Among them, the Co@S-1(EDA) zeolite catalyst synthesized with ethylenediamine demonstrated superior catalytic reaction performance, achieving a toluene conversion of 63.8 % with a benzaldehyde selectivity of 68.5 % within 6 h of reaction. This eminent catalytic oxidation ability for Co@S-1(EDA) zeolite catalyst is mainly ascribed to its largest Co 2+ /Co 3+ ratio, its most oxygen vacancy amount and its largest external surface area. Furthermore, the Co@S-1(EDA) zeolite catalyst exhibited excellent re-usability, maintaining its activity over five consecutive catalytic cycles. This study emphasizes ligand engineering as an effective approach to create highly efficient and stable cobalt-based zeolite catalysts for selective hydrocarbon oxidation reactions.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2019
·
IF 5.383
Fei Ma,Xiaoqiang Dai,Jie Jin,Ning Tie,Yatang Dai
Despite cobalt molybdenum sulfide (CoMoS 4 )-based materials are a prospective class of electrode material for supercapacitors , their relatively inferior rate capability and cyclic stability have severely restricted practical applications. Engineering multicomponent binder-free electrode material is deemed an effective approach to fulfill the demand of high-performance supercapacitors. Herein, the hierarchical core-shell hollow CoMoS 4 @Ni–Co–S nanotubes supported on flexible carbon cloth are designed through a scalable hydrothermal method combined with electrodeposition process. Due to the synergistic contribution of highly conductive CoMoS 4 nanotubes core and highly active nickel cobalt sulfide nanosheets shell, the 3D hierarchical CoMoS 4 @Ni–Co–S nanotubes electrode achieves a remarkable specific capacitance of 2208.5 F g −1 at a rate of 1 A g −1 and extraordinary cycling life (91.3% capacitance retention over 5000 cycles at 3 A g −1 ). Moreover, the assembled CoMoS 4 @Ni–Co–S//activated carbon (AC) asymmetric supercapacitor presents satisfactory electrochemical performance, delivering an energy density of 49.1 W h kg −1 at a high power density of 800 W kg −1 and competitive cyclic stability (90.3% retention of initial capacity after 10000 cycles). This work designs an effective synthetic route and validates the potential prospects of binder-free 3D hierarchical architecture for developing high-performance and advanced energy storage devices.
✓ 已验证
产品关联
DOI
高影响因子
NANO
·
2019
·
IF 1.293
Yanwei Sui,Man Zhang,Haihua Hu,Yuanming Zhang,Jiqiu Qi,Fuxiang Wei,Qingkun Meng,Yezeng He,Yaojian Ren,Zhi Sun
The interconnected three-dimensional Ni–Co–S nanosheets were successfully deposited on ZnO nanorods by a one-step potentiostatic electrodeposition. The Ni–Co–S nanosheets provide a large electrode/electrolyte interfacial area which has adequate electroactive sites for redox reactions. Electrochemical characterization of the ZnO@Ni–Co–S core–shell nanorods presents high specifc capacitance (1302.5 F/g and 1085 F/g at a current density of 1 A/g and 20 A/g), excellent rate capabilities (83.3% retention at 20 A/g) and great cycling stability (65% retention after 5000 cycles at a current density of 30 A/g). The outstanding electrochemical performance of the as-prepared electrode material also can be ascribed to these reasons that the special structure improved electrical conductivity and allowed the fast diffusion of electrolyte ions.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）