NEW JOURNAL OF CHEMISTRY
·
2023
·Vol. 47
·期 18
·8566-8577
·
IF 3.3
Tingting Tang,Bo Jin,Ping Zhao
Aromatic nitro compounds are the main components of explosives. They are not only explosive and dangerous but also have high toxicity and high stability in the human body, soil, and water resources, destroying the ecological environment. Herein, a simple hydrothermal method is used to successfully prepare layered MIL-100 (Fe). A series of aromatic nitro compounds including p-nitrophenol (PNP), nitrobenzene (NB), dinitrotoluene (2,4-DNT), dinitrophenol (2,4-DNP), and 2,4,6-trinitrophenol (2,4,6-TNP) were degraded by the photo-Fenton method. The MIL-100 (Fe) photo-Fenton agent can almost completely degrade PNP within 2 min. Similarly, it has a good degradation effect on other pollutants. Finally, the mechanism of the photo-Fenton reaction was discussed by product analysis and free radical capture experiments after the photochemical reaction. This study demonstrates the potential application value of MIL-100 (Fe) as a photo-Fenton reagent to degrade nitroaromatic explosives.
研究领域:
环境化学
·
材料科学
·
催化化学
·
环境污染与控制
·
应用化学
✓ 已验证
DOI
高影响因子
CATALYSIS COMMUNICATIONS
·
2017
·
IF 3.33
Zhiming Chen,Bo Xu,Xiaomei Wang,Li Zhang,Xiaoqing Yang,Cuncheng Li
Separation and recycling of noble metal nanoparticles after catalytic reaction is critical to promote its application efficiency and cut down the cost. This work presents a facile synthesis strategy for the fabrication of sandwich-like MIL-100(Fe)@Pt@MIL-100(Fe) (denoted as S-Pt) nanoparticles with high stability and improved catalytic activity for hydrogenation of nitrophenol. MIL-100(Fe) acts as both carrier to make the catalyst easily separated and shield to protect the tiny Pt nanoparticles from leaching or aggregation during reaction. Moreover, mass transfer effect of the porous MIL-100(Fe) with its pore structure serving as nano-reactor is also benefit for promoting the catalytic efficiency.
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2017
·
IF 3.615
Bo Xu,Xuejiao Li,Zhiming Chen,Tao Zhang,Cuncheng Li
Pd@MIL-100(Fe) composite nanoparticles were synthesized and characterized by high-resolution transmission electron microscopy (HRTEM), powder X-ray diffraction analysis, nitrogen adsorption-desorption analysis, X-ray photoelectron spectroscopic (XPS) analysis, energy-dispersive X-ray spectroscopy (EDS) and element mapping. Due to the local restriction or confinement effect of the unique pore/surface structure within the MIL-100(Fe) nanospheres , small Pd nanoparticle (4–6 nm) were obtained with high stability without using any surfactant as stabilizer . The as-synthesized Pd@MIL-100(Fe) composite nanoparticles were then employed for the catalytic reduction of 2/3/4-nitrophenol, which exhibiting high catalytic activity and recyclability attributed to the synergistic effect between Pd nanoparticles and MIL-100(Fe) nanospheres.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Wenjuan He,Zuopeng Li,Shengchen Lv,Mingxin Niu,Wenfeng Zhou,Jing Li,Runhua Lu,Haixiang Gao,Canping Pan,Sanbing Zhang
The Fe 3 O 4 @MIL-100(Fe) hybrid composites are successfully synthesized via an in-situ growth method and characterized using various techniques. The ability of the magnetic metal–organic framework to promote photo-Fenton like processes is investigated using levofloxacin as a representative substrate. The results show that the composite with a Fe 3 O 4 :MIL-100(Fe) mass ratio of 1:4 has a higher degradation efficiency (up to 93.4%) than Fe 3 O 4 , MIL-100(Fe), and the other fabricated composites. This higher catalytic activity is ascribed to the synergistic effect between Fe 3 O 4 and MIL-100(Fe), by which the quick separation of hole-electron pair from MIL-100(Fe) and the efficient reduction of Fe 3+ to Fe 2+ in the photo-Fenton reaction are mutually promoted. Moreover, the composite shows favorable recyclability without apparent loss of apparent photo-Fenton activity even after five cycles, and more importantly, can be recovered magnetically. The possible degradation mechanism and intermediates of levofloxacin in the photo-Fenton reaction have been tentatively proposed based on free radical quenching, electron paramagnetic resonance and mass spectrometry analysis. Finally, the developed Fe 3 O 4 @MIL-100(Fe) is successfully applied for the removal of levofloxacin from spiked wastewater with removal efficiencies ranging from 77.9 to 85.5%, which indicates that the proposed system has significant potential for wastewater treatment applications.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2023
·
IF 6.7
Xingxing Huang,Yingzhang Shi,Cheng Liu,Zhiwen Wang,Jinhong Bi,Jimmy C. Yu,Ling Wu
A series of Cu 2 O clusters/MIL-100(Fe) heterojunctions with different Cu 2 O mass ratios were constructed as the photocatalysts for N 2 fixation. An optimal nitrogen fixation performance of 51.22 μmol·g −1 ·h −1 is achieved when the mass fraction of Cu 2 O is 20 %. Isotope analysis experiments confirmed that the nitrogen source is N 2 . Possible intermediate signals during photocatalytic reactions were detected by in situ DRIFTS. XPS results further confirm the formation of Cu 2 O/MIL-100(Fe) heterojunctions, and that the existence of Cu–O surface interactions is the key to efficient electron transfer. It is revealed that the improvement of the catalytic performance is derived from the formation of heterojunction which regulates the energy band structure as well as promotes the separation of photogenerated electron-hole pairs. This study proposes a possible mechanism of photocatalytic nitrogen fixation and emphasizes the role of surface interaction and electron transfer in type-II heterojunction in improving nitrogen fixation performance.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2017
·Vol. 7
·期 10
·5621-5627
·
IF 3.108
Shan Huang,Kai-Li Yang,Xiao-Fang Liu,Hu Pan,Heng Zhang,Song Yang
MIL-100(Fe) was used for the first time in the catalytic transformation of hexose sugars into lactic acid (LA). The as-synthesized MIL-100(Fe) was systematically characterized, and its superior morphological and textural properties were demonstrated to contribute greatly to the pronounced catalytic performance in fructose-to-LA conversion (up to 32% yield), as compared with other catalysts like Cu-BTC and MIL-100(Cr). The effects of reaction conditions including temperature, reaction time, and substrate loading were explored. In addition, MIL-100(Fe) could be easily reused for 4 cycles with no evident decrease in catalytic activity.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES
·
2022
·
IF 3.318
Yunhui Cheng,Shihua Luo,Fuqi Huang,Xiangyi Yang,Maolong Chen,Ye Jiao,Li Wen,Zhou Xu
Soy sauce residue (SSR) is a valuable biological resource, which contains soy isoflavones (SIs) with antioxidant activity and can be used to scavenge radicals. Herein, MIL-100(Fe) was synthesized for the extraction of SIs from SSR. Under the optimal adsorption conditions, the adsorption capacity of MIL-100(Fe) for SIs was 51.81 mg/g, which could achieve a purity of 56.17% and a recovery of 93.8%. These results demonstrated MIL-100(Fe) possessed effective properties of adsorption and purification for SIs. The content of SIs in the purified product was 167 times than that of SSR. The purified total SIs had a good antioxidant activity. The established method had a good scavenging ability toward 2, 2-diphenyl-1-picrylhydrazyl, superoxide and hydroxyl radicals, with IC 50 values of 0.177, 0.116 and 0.082 mg/mL, respectively. Besides, the ferrous ion chelating potency was better than others, with IC 50 values of 0.63 ± 0.0044 mg/mL. The established method was suitable for large-scale separation of purified total SIs and provided a reference for purification of bioactive factors from complex substrates.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Shiyong Wei,Aijia Cao,Siyuan Huang,Yao Shen,Ting Lei,Songmei Luo,Mingjun Cai,Wenjun Xiang,Anying Chen,Rui Wang
Although MIL-100(Fe) was regarded as an ideal material for the environmental remediation, it could not be applied in practical because of the potential eco-environmental risk and cost. In this work, a novelty strategy of liquidizing crystal MIL-100(Fe) was posted for the first time through inhibiting the crystallization process and forming physical MIL-100(Fe) gel. Due to this MIL-100(Fe) sol–gel, MIL-100(Fe) could easy cover on the surface of silica powder (SiO 2 ) through simple soaking operation. MIL-100(Fe) covering on SiO 2 (MIL-100(Fe)@SiO 2 ) could be quickly separated from wastewater spontaneously owing to the carrier of SiO 2 , even in a tank of 2.0 m, which made it possible for purifying wastewater in practical. MIL-100(Fe)@SiO 2 could remove phosphate with a removing ratio of closing 100 % at an initial concentration of 10 mg/L, while more than 95 % towards methyl orange (MO). The removing ratio of MO by MIL-100(Fe)@SiO 2 did not obviously decrease when the concentration of MO increased to 100 mg/L. And the adsorption performance of phosphate did not affect by pH among 3.0–9.0. The adsorption amount exceeded 50 % of maximum adsorption capacity for phosphate within 30 min, while 90 % for MO. Monodentate mononuclear coordination could explain the adsorption of phosphate by MIL-100(Fe)@SiO 2 . The N atom in MO might be acted as Lewis acid to coordinate with MIL-100(Fe)@SiO 2 . After adsorption, the P-saturated and MO-saturated MIL-100(Fe)@SiO 2 could be effectively regenerated by the dilute HCl and NaOH solution, respectively. The recovery ratio of adsorption capacity for phosphate and MO were up to 97.7 % and 71.6 %.
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2022
·
IF 5.876
Xiuying Zhu,Mengjie Li,Xiong-Fei Zhang,Jianfeng Yao
Iron-based metal-organic framework (MIL-100) with intrinsic high surface area and low cost is extremely attractive in the field of organic pollutant remediation. Herein, delignified balsa wood is utilized as substrate/support for the in situ growth and dispersion of MIL-100 particles. Results demonstrate that the MIL-100 particles adhere tightly to the support and a hierarchal architecture is constructed. The MIL-100@Wood composite can be used as adsorbent and filter for the alleviation of organic contamination. With 25.4 wt% of MIL-100 loading, the MIL-100 decorated delignified wood (MD-Wood) exhibits a tetracycline (TC) adsorption capacity of 109.9 mg/g. The composite MD-Wood can be easily fabricated into an all-in-one filter and this filter presents an effective treatable volume of 1100 mL of TC solution (20 mg/L). The MD-Wood is further deposited with Ag particles and the Ag@MD-Wood can be directly applied for the flow catalytic reduction of 4-nitrophenol. Moreover, the composite woods are facile to regenerate and possess superior reusability and stability.
✓ 已验证
DOI
高影响因子
Catalysts
·
2026
·Vol. 16
·期 9
·807
·
IF 4.5
Fukun Bi,Rong Qiao,Jiahao Xu,Yuzhe Lu,Jiafeng Wei,Yaofei Zhang,Xiaodong Zhang
The development of highly efficient catalysts is important for the photothermal catalytic oxidation of volatile organic compounds (VOCs). Herein, MIL-100(Fe) was used as the sacrificial template to prepare MnFeOxcatalysts with different Mn contents through the impregnation–calcination method, and their performance in photothermal catalytic oxidation of toluene was investigated. The results show that the content of Mn significantly affects the crystal phase structure, pore properties, surface chemical state, and optical response of the catalyst. Among them, 30%MnFeOxexhibits the best photothermal catalytic activity, with T50and T90being 211 and 237 °C, respectively, which are significantly lower than those of FeOx(232 and 260 °C). Characterization results suggested that the introduction of Mn caused the bandgap of FeOxto decrease from 1.96 to 1.67 eV. Meanwhile, the surface Fe2+, adsorbed oxygen (Oads) species, and oxygen vacancies were increased, enhancing visible light absorption and gaseous oxygen species adsorption and activation, which promoted the photothermal catalytic oxidation of toluene. Additionally, the 30%MnFeOxcatalyst presented good thermal stability and water resistance. Furthermore, during the reaction process, the in situ activation of the catalyst’s surface induced the increase in surface Fe2+, Mn3+,and Oadsspecies, which enhances the photothermal catalytic activity of the catalyst. Importantly, the in situ DRIFTS results further indicate that toluene is mainly oxidized along the path of toluene → benzyl alcohol → benzoate → maleic anhydride → CO2and H2O. This work provides a theoretical basis for the construction of low-cost, non-precious-metal Mn–Fe-based photothermal catalysts.
✓ 已验证
DOI
高影响因子
FOOD CHEMISTRY
·
2025
·
IF 9.8
Shan Huang,Danyu Lv,Yuhuan Geng,Fuhao Yue,Xinan Zeng,Mengwai Woo,Zhong Han,Ji Ma
Malachite green (MG) is a toxic contaminant commonly found in aquaculture, making its effective removal and detection crucially important. In this study, MIL-100(Fe) was synthesized via a microwave-assisted hydrothermal method under optimized conditions (150 °C, 200 W, 30 min; FeCl₃·6H 2 O:H₃BTC = 2:3). The resulting material exhibited excellent structural stability, a high specific surface area (1169.9 m 2 /g), and a remarkable MG adsorption capacity of 714.29 mg/g. To enable practical application and reusability, MIL-100(Fe) was immobilized onto a melamine sponge (MeS) using polyvinylidene fluoride (PVDF) as binding agent, forming a recyclable MeS/PVDF/MOF composite. When applied for solid-phase extraction of MG in conjunction with UV detection, the composite demonstrated high recovery rates (92.1–99.4 %), a low detection limit (2.29 μg/L), and consistent performance with over 80 % recovery after six reuse cycles in both real fish and wastewater samples. This study presents a simple, efficient and sustainable strategy for the adsorption and detection of MG in aquatic food matrices.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Yeshuang Wang,Mingxian Duan,Zhelin Su,Chao Yang,Bingning Wang,Jiawei Kou,Huiling Fan
The abundant Fe 3+ Lewis acidic sites and well-developed pore structure endow the Fe-MOFs with great potential for H 2 S catalytic oxidation at room temperature, but their performance is inferior owing to the insufficient redox ability of the Fe 3+ species inherent in frameworks. Herein, an effective protocol was proposed for the first time to remarkably improve the catalytic oxidation performance of MIL-100(Fe) under ambient conditions through the introduction of Fe 2+ coordinatively unsaturated site (CUS) species into the framework. As expected, the sample after modification had a superior H 2 S breakthrough capacity of 267.3 mg S/g, an 18.4-fold increase compared with that without Fe 2+ CUS (14.5 mg S/g). The introduced Fe 2+ species triggered the Fe 3+ /Fe 2+ redox cycle for H 2 S catalytic oxidation by enhancing the oxidative ability of the Fe 3+ CUS intrinsic to the framework. Moreover, the Fe 2+ CUS was also found act as an active site for O 2 activation into O 2 ∙– , which not only provides an additional pathway for H 2 S catalytic oxidation but also accelerates the redox cycling of Fe 3+ /Fe 2+ during the catalytic oxidation process. On the basis of the experimental findings, a plausible catalytic mechanism involving mixed-valence iron sites in MIL-100(Fe) was proposed.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）