MATERIALS CHEMISTRY AND PHYSICS
·
2020
·
IF 3.408
Yanan Dong,Tianding Hu,Manoj Pudukudy,Hongying Su,Lihong Jiang,Shaoyun Shan,Qingming Jia
In this paper, the effect of conventional solvothermal and a microwave-assisted method for the synthesis of MIL-101(Fe) and NH 2 -MIL-101(Fe) as adsorbents for the removal of tetracycline in wastewater is reported for the first time. The results had shown that the microwave treatment led to a significant reduction in the material synthesis time, which greatly saved the energy. It was also found that the microwave-assisted synthesized material exhibited small particle size, high specific surface area and better adsorption capacity. The introduction of amino group further enhanced the adsorption capacity of MIL-101(Fe). The adsorption capacity of MIL-101(Fe) and NH 2 -MIL-101(Fe) samples for tetracycline adsorption by microwave assisted synthesis method reached up to 332 mg/g and 378 mg/g, respectively. Moreover, the adsorption isotherm was well-fit with Freundlich model, indicating a multilayer adsorption . The kinetic studies indicated that the reaction followed pseudo second-order reaction kinetics with a best fit to the theoretical value. Due to the higher adsorption efficiency and lower energy consumption of the synthesis, the as-prepared microwave assisted materials could be used as potential adsorbents for different pollutants in wastewater.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
Journal of Chemistry
·
2020
·
IF 1.79
Xiaofang Liu,Zhigang Liu,Qiuyun Zhang,Hongguo Wu,Rui Wang
MIL-101(Fe) was explored for the first time for the catalytic conversion of glucose into lactic acid (LA). The as-synthesized MIL-101(Fe) was successfully characterized, and its higher specific surface area, porosity, and feasible acid properties were confirmed to determine the remarkable catalytic activity in glucose-to-LA conversion (up to 25.4% yield) compared with other catalysts like MIL-101(Cr, Al) and UiO-66(Zr). The reaction parameters including temperature, reaction time, and substrate species as well as catalyst reusability were discussed.
研究领域:
化学工程
·
材料科学
·
生物化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2022
·
IF 3.656
Lijun Guo,Feifei Li,Jianxin Liu,Rui Li,Zhuobin Yu,Qing Xi,Lulu Zhang,Yaru Li,Caimei Fan
Morphology regulation is a simple way to improve photocatalytic activity. In this work, a MIL-101(Fe) photocatalyst with cracked spindle morphology has been successfully prepared by EG pre-coordination solvothermal method . The cracking degree of MIL-101(Fe) can be regulated by adjusting pre-coordination time. The MIL-101(Fe) with the optimal uniform crack displays a best NH 3 evolution rate of 592 μmol h −1 g −1 under the visible light irradiation . Cracked MIL-101(Fe) is similar to a semi-exposed model, which can increase the number of reactive sites, improve refraction and reflection of light, and ultimately enhance the photocatalytic nitrogen fixation activity. This work developed a convenient strategy to improve the photocatalytic activity of nitrogen reduction by controlling morphology.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2024
·Vol. 48
·期 20
·9185-9195
·
IF 2.7
Shikai Xue,Dongying Zhu,Qing Zuo,Shuangfeng Yang,Haiyan Wang,Qiujun Lu,Guoxing Yin,Guihua Ruan,Fuyou Du
A novel MIL-101(Fe)/ZnCrZr-LBMO heterojunction was successfully constructed and used for the removal of ciprofloxacin (CIP) in this work. The MIL-101(Fe)/ZnCrZr-LBMO composite exhibited significantly enhanced photocatalytic degradation activity, with reaction rates approximately 3.4 and 3.1 times faster than those observed with pristine MIL-101(Fe) and ZnCrZr-LBMO, respectively. The effect of different amounts of ZnCrZr-LBMO, sample pH, CIP concentration, inorganic cations, and anions on CIP removal was investigated, and the possible intermediates and degradation pathways of CIP were speculated. The·O2− radicals dominated CIP degradation, with minor contributions from 1O2, h+, and ·OH radicals. The composite exhibited high removal rates for CIP (94.7%), ofloxacin (86.8%), and tetracycline (96.3%), respectively, within 60 min of light irradiation, and excellent reusability, retaining over 85.1% CIP degradation rate after five cycles. Our work provides a new reference to construct highly efficient and easily recyclable MIL-101(Fe)/ZnCrZr-LBMO photocatalysts for the removal of antibiotic pollutants, promising advancements in real water treatment applications.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
LANGMUIR
·
2024
·
IF 3.7
Zeqi Wu,Feng Niu,Wenhao Yao,Siyuan Gao,Da Chen,Yuexiang Huang
The activation of an inert C(sp3)–H bond in selective oxidation of hydrocarbons under mild conditions is a critical and challenging process. Herein, we report a stable chlorine-coordinated metal–organic framework (MOF) photocatalyst, MIL-101(Fe), for efficient visible-light-driven photocatalytic selective oxidation of toluene to benzaldehyde in air under ambient conditions. Encouragingly, a benzaldehyde formation yield of 3.11 mmol·g–1·h–1 with a selectivity of 92.1% is achieved in 5 h, which is superior to most of the reported works. Based on the experimental results and characterizations, the high catalytic performance is mainly due to the promoted rate-limiting step of C(sp3)–H bond activation by a chlorine radical (Cl·) from the coordinated −Cl in the MIL-101(Fe) structure. In addition, the present photocatalyst possesses good substrate tolerance for photocatalytic selective oxidation of various toluene derivatives under optimized conditions.
研究领域:
化学
·
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2019
·
IF 6.361
Zongchen Li,Xuemin Liu,Wei Jin,Qingsong Hu,Yaping Zhao
Arsenic species are regarded as typical water pollutants due to their toxicity. The chemical structures of arsenic species greatly influence their migration and transformation in the environment. Metal-organic frameworks (MOFs) are used as reliable adsorbents to control arsenic contamination, so it is urgently needed to study the effect of chemical structure of arsenic species during adsorption process. The adsorption behaviors of arsenate (As(V)) and its organic forms such as roxarsone (ROX), p-arsanilic acid (p-ASA) and dimethyl arsenate (DMA) by MIL-101(Fe), a type of highly porosity iron-based MOFs in aqueous environment were detailed investigated. The adsorption kinetics of those arsenic species on MIL-101(Fe) is rapid followed with pseudo-second-order kinetic model. MIL-101(Fe) exhibits excellent adsorption capacities for As(V), ROX, p-ASA and DMA with maximum adsorption capacities of 232.98, 507.97, 379.65 and 158.94 mg g −1 , respectively. The formed Fe O As inner-sphere coordination between arsenic species and the incomplete-coordinated cationic Fe in the MIL-101(Fe) cluster is the primary adsorption mechanism based on FTIR and XPS analysis. Substituent aromatic units in ROX and p-ASA strengthen the adsorption on MIL-101(Fe) through hydrogen bonds and π-π stacking interaction, resulting in higher adsorption capacities far beyond that of As(V) and DMA. The reusability of MIL-101(Fe) is limited by the strong Fe O As coordination. These results confirm MIL-101(Fe) a reliable adsorbent to control the aqueous arsenic species contamination and emphasize the significant role of the chemical structure of arsenic speciation on adsorption performances of MOFs.
研究领域:
环境科学
·
材料科学
·
化学
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF POROUS MATERIALS
·
2025
·
IF 3.2
Rui Guofen,Hu Zihao,Wu Huiqi,Ma Jianfeng
Composites of MIL-101(Fe)/CoFe 2 O 4 were prepared by a simple solvothermal approach and these composites were explored for tetracycline (TC) degradation by using light and persulfate (PS). MIL-101(Fe)/CoFe 2 O 4 catalyst showed superior catalytic performance when combined with photocatalysis and chemical catalysis. Experimental results suggest that the degradation efficiency reached 83% within 40 min. The TC adsorption ability of MIL-101(Fe)/CoFe 2 O 4 was tightly associated with pH, which can be interpreted through isoelectric point. Oxygen-active species, containing singlet oxygen ( 1 O 2 ) or superoxide radicals (O· 2‾), were also generated when there was dissolved oxygen, which could decompose the TC organic contaminant in solution. To be specific, MIL-101(Fe)/CoFe 2 O 4 /PS/Vis catalytic system was capable of eliminating TC through forming h + , 1 O 2 , O· 2‾, hydroxyl radicals (·OH) and sulfate radicals (·SO 4 ‾) species. Moreover, MIL-101(Fe)/CoFe 2 O 4 composite material showed outstanding stability.
研究领域:
环境科学
·
催化材料
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POROUS MATERIALS
·
2019
·Vol. 26
·期 6
·1839-1850
·
IF 1.947
He Lei,Zhang Yaqin,Zheng Yane,Jia Qingming,Shan Shaoyun,Dong Yanan
An effective catalyst of MIL-101(Fe)/TiO 2 composite was synthesized by solvothermal method. The resultant MIL-101(Fe)/TiO 2 was used for advanced oxidation degradation of tetracycline (TC) for the first time. The results indicated that the MIL-101(Fe)/TiO 2 showed higher TC degradation efficiency than pure MIL-101(Fe) or TiO 2 with the persulfate. Using 1 g L −1 MIL-101(Fe)/TiO 2 and persulfate at pH 7, 90.15% degradation rate was achieved under xenon lamp irradiation in 5 min for 20 mg L −1 TC. TiO 2 introduced in the composite played an important role in the degradation process, in which TiO 2 had a synergetic effect with Fe 3+ to generate Fe 2+ , Ti 3+ and radicals. Fe 2+ reacted with persulfate to produce Fe 3+ and a number of · OH to degrade TC. This reaction process was so fast that MIL-101(Fe)/TiO 2 with persulfate could degrade TC fairly rapidly. A novel TiO 2 -based metal–organic frameworks (MOFs) composite was more efficient for degrading pharmaceutical wastewater.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Catalysts
·
2019
·Vol. 9
·期 11
·906
·
IF 3.444
Jieyang Yang,Zequan Zeng,Zhanggen Huang,Yan Cui
In this work, the activation effect of vacuum thermal treatment on MIL-101(Fe) (MIL: Materials of Institute Lavoisier) was investigated for the first time. It demonstrated that vacuum thermal activation could accelerate the activation of persulfate (PS) by MIL-101(Fe), and the enhancement of the catalytic capacity of MIL-101(Fe) was mainly attributed to the change in the FeII/FeIII mixed-valence center. The results of the SEM and XRD showed that vacuum thermal activation had a negligible effect on the crystal structure and particle morphology of MIL-101(Fe). Meanwhile, the higher temperature of vacuum thermal activation caused a higher relative content ratio of FeII/FeIII. A widely used azo dye, X-3B, was chosen as the probe molecule to investigate the catalytic performance of all samples. The results showed that the activated samples could remove X-3B more effectively, and the sample activated at 150 °C without regeneration could effectively activate PS to remove X-3B for at least 5 runs and approximately 900 min. This work highlights the often-overlooked activation effect of vacuum thermal treatment and provides a simple way to improve the catalytic capacity and reusability of MIL-101(Fe) which is beneficial for the application of MIL-101(Fe)/PS systems in azo dye wastewater treatment.Keywords:vacuum thermal activation;MIL-101(Fe);persulfate;azo dye
研究领域:
环境科学
·
催化
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
·
2024
·Vol. 25
·期 18
·9855
·
IF 4.9
Yiting Luo,Rongkui Su
Tetracycline’s accumulation in the environment poses threats to human health and the ecological balance, necessitating efficient and rapid removal methods. Novel porous metal–organic framework (MOF) materials have garnered significant attention in academia due to their distinctive characteristics. This paper focuses on studying the adsorption and removal performance of amino-modified MIL-101(Fe) materials towards tetracycline, along with their adsorption mechanisms. The main research objectives and conclusions are as follows: (1) NH2-MIL-101(Fe) MOF materials were successfully synthesized via the solvothermal method, confirmed through various characterization techniques including XRD, FT-IR, SEM, EDS, XPS, BET, and TGA. (2) NH2-MIL-101(Fe) exhibited a 40% enhancement in tetracycline adsorption performance compared to MIL-101(Fe), primarily through chemical adsorption following pseudo-second-order kinetics. The adsorption process conformed well to Freundlich isotherm models, indicating multilayer and heterogeneous adsorption characteristics. Thermodynamic analysis revealed the adsorption process as a spontaneous endothermic reaction. (3) An increased adsorbent dosage and temperature correspondingly improved NH2-MIL-101(Fe)’s adsorption efficiency, with optimal performance observed under neutral pH conditions. These findings provide new strategies for the effective removal of tetracycline from the environment, thus holding significant implications for environmental protection.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
LANGMUIR
·
2025
·
IF 3.9
Mingyang Xiong,Yao Zeng,Ruisi Qiu,Hongxing He,Yi Zhang,Zhifeng Nie,Bing Wang
Bisphenol A (BPA) is extensively utilized as an industrial chemical in the production of certain plastics and epoxy resins. They are frequently found in environmental water and have the potential to cause risks to both the environment and human health. To efficiently remove the endocrine disruptor BPA from aqueous solutions, sea urchin-like magnetic material Fe3O4@PDA@NH2-MIL-101 (Fe) was synthesized via hydrothermal methods. Fe3O4@PDA@NH2-MIL-101 (Fe) has excellent adsorption performance, with a theoretical maximum adsorption capacity of 300.47 mg/g for BPA. The adsorption kinetics of BPA by Fe3O4@PDA@NH2-MIL-101 (Fe) followed the pseudo-second-order kinetic model and Liu’s isotherm model. Magnetic separation experiments reveal a high recovery efficiency, maintaining 94.82% of its initial adsorption capacity after five cycles. The primary adsorption mechanisms of Fe3O4@PDA@NH2-MIL-101 (Fe) on BPA included pore filling, hydrogen bonding, π–π interaction, and Lewis acid–base interaction. Additionally, the material showed excellent removal performance of BPA, with a maximum adsorbed amount of 135.27 mg/g for total organic carbon (TOC) in the shale gas fracturing flowback fluid. These findings suggest that Fe3O4@PDA@NH2-MIL-101 (Fe) holds significant potential as an adsorbent for BPA removal from actual wastewater, offering promising prospects for practical applications.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Environmental Chemical Engineering
·
2024
·
IF 7.4
Hao Wang,Renting Huang,Wei Mao,Hao Xu,Chutong Ling,Junru Zhao,Fan Yi,Yongxin Zhou,Jinghong Zhou
Iron-based metal-organic frameworks (MOFs) represent a potentially important tool for controlling organic pollutants . However, the structural stability of most iron-based MOFs in the aqueous environment is limited. Therefore, this study sought to improve the aqueous stability and photocatalytic activity of MIL-101(Fe) using an in-situ modification strategy. A novel and highly water-stable MIL-101(Fe)@IPA 4 was prepared using ligand regulation. Owing to the in-situ modification effect, MIL-101(Fe)@IPA 4 exhibited remarkable hydrophobicity with a water contact angle at 102.4° while maintaining minimal leaching of iron ions (0.46 mg/L), even after five cycles of photocatalysis . Under MIL-101(Fe)@IPA 4 /UV/H 2 O 2 conditions, the removal rates of ciprofloxacin and total organic carbon reached 100% and 49.16%, respectively, within 60 min. These researches suggest that introducing IPA improves the light absorption properties of MIL-101(Fe)@IPA 4 and facilitates electron-hole separation, thereby promoting the generation of active species. The ecotoxicity assessment of major degradation intermediates of ciprofloxacin was conducted using the ECOSAR system. Our findings provide novel insights for enhancing the water stability of iron-based MOFs through an in-situ modification strategy, which is crucial for pollution control efforts.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）