JOURNAL OF ALLOYS AND COMPOUNDS
·
2017
·
IF 3.133
Chunmin Wang,Jun Shen,Xiankun Zhang,Bin Duan,Jiaxin Sang
A new organic-inorganic composite coating was generated on AZ31 alloy surface with sol-gel method to improve the anti-corrosion performance and biocompatibility of AZ31 alloy in the physiological environment. The results of electrochemical impedance spectroscopy (EIS), potentiodynamic polarization , pH variations in modified-simulated body fluid (m-SBF) demonstrated that the silane/Mg(OH) 2 composite coating significantly enhanced the anti-corrosion ability and slowed down the degradation of AZ31 alloy under in vitro condition. Fourier-transform infrared spectroscopy (FTIR) showed that the major composition of in-situ formation layer was Mg(OH) 2 . The surface morphology , chemical and phase constitutions of the composite coating were detected using scanning electron microscopy (SEM). The results demonstrated that the composite coating was uniform and defect-free. X-ray diffraction analysis (XRD) was also employed to characterize the corrosion products of all specimens immersed in m-SBF after 30 days. MTT and ALP tests indicated that the composite coating greatly enhanced the cell proliferation and osteogenic differentiation of osteoblasts on the AZ31 alloy surface.
研究领域:
生物材料学
·
表面工程
·
组织工程
·
生物医学工程
·
腐蚀科学
·
骨科学
✓ 已验证
DOI
高影响因子
POLYMER TESTING
·
2022
·
IF 4.931
Yuezhou Liu,Yanjing Liu,Xiyue Li,Yongfang Qian,Lihua Lv,Ying Wang
In order to fabricate antibacterial nanofiber membranes for tissue engineering field, the oxidative damage of magnesium hydroxide nanoparticles (Mg(OH) 2 NPs) against the model system of Escherichia coli ( E. coli ) was researched by measuring the oxidative stress response, oxidative stress products and glucose metabolism. The toxicity of Mg(OH) 2 NPs to a normal biological system was evaluated in vivo through the acute oral toxicity, blood physiological and serum biochemical markers and acute skin irritation, indicating that the Mg(OH) 2 NPs exhibited great biosafety. The Mg(OH) 2 NPs with antibacterial property and biosafety were loaded on PCL/PVP nanofiber substrates through electrospinning technology to fabricate the Mg(OH) 2 /PCL/PVP nanofiber membranes. The results of characterization and antibacterial test showed that the Mg(OH) 2 /PCL/PVP nanofiber membranes with 8.0 wt% Mg(OH) 2 NPs present excellent antibacterial rate of 100% against E. coli that the Mg(OH) 2 NPs can be physically and evenly loaded on nanofiber substrates.
✓ 已验证
产品关联
DOI
高影响因子
Minerals
·
2023
·Vol. 13
·期 3
·318
·
IF 2.5
Yingli Chen,Xiyun Yang,Linglong Wu,Lirong Tong,Jing Zhu
This paper describes a leaching-purifying-precipitation process to recover magnesium from serpentine acid-leaching solution and to synthesize high purity Mg(OH)2and 4MgCO3·Mg(OH)2·4H2O. Fe, Al, and Cr in the leaching solution were removed using the oxidation precipitation method with active MgO as a precipitant and H2O2as an oxidant. Ni, Co and Mn were removed by Na2S precipitation to obtain a pure MgSO4solution. Mg2+ions were first precipitated with NH3·H2O to synthesize Mg(OH)2, followed by NH4HCO3precipitation to obtain 4MgCO3·Mg(OH)2·4H2O. A small part of MgSO4coprecipitates with Mg(OH)2to form MgSO4·5Mg(OH)2·3H2O. The Mg(OH)2was aged with a diluted NaOH solution to remove the sulfur; the two-stage precipitation percentage of Mg is 96.3%. Mg(OH)2has a purity of 98.48% with a sulfur content of 0.28%. This process provides a promising method for the high-efficiency recovery of Mg and the large-scale production of the high purity of Mg(OH)2from the serpentine.Keywords:serpentine;two-stage counter current leaching;remove impurity;MgSO4·5Mg(OH)2·3H2O;high purity Mg(OH)2
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS COMMUNICATIONS
·
2016
·
IF 3.389
Xiaomin Xiang,Bin Zhang,Guoqiang Ding,Jinglei Cui,Hongyan Zheng,Yulei Zhu
The oxidation of furfural in H 2 O 2 and H 2 O 2 –Mg(OH) 2 system were systematically investigated and a rational explanation for the reaction mechanism was proposed. 2-formyloxyfuran, from selective oxidation of HC O group in furfural, was a crucial intermediate. The addition of Mg(OH) 2 suppressed the oxidation of furan ring of furfural and enhanced selectivities of 2(5H)-furanone (44.8%) and succinic acid (38.0%). FT-IR, Gaussian calculation and experimental results indicated that the process of furfural oxidation with H 2 O 2 is homogeneous, and the synergy between dissolved Mg 2 + cations and OH − ions facilitates the HOO − attacking the carbon atom of HC O other than the C C bound of furan ring.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES
·
2023
·
IF 3.5
Hongming Zhang,Fangyuan Si,Jiawei Dou,Mingxuan Li,Long Wu,Tian Xie,Lanming Zhao,Chuyuan Huang,Xianfeng Chen
Experiments on the flame propagation of starch dust explosion with the participation of ultrafine Mg(OH) 2 in a vertical duct were conducted to reveal the inerting evolution of explosion processes. Combining the dynamic behaviors of flame propagation, the formation law of gaseous combustion products , and the heat dissipation features of solid inert particles, the inerting mechanism of explosion flame propagation is discussed. Results indicate that the ultrafine of Mg(OH) 2 powders can cause the agglomeration of suspended dust clouds, which makes the flame combustion reaction zone fragmented and forms multiple small flame regions. The flame reaction zone presents non-homogeneous insufficient combustion, which leads to the obstruction of the explosion flame propagation process and the obvious pulsation propagation phenomenon. As the proportion of ultrafine Mg(OH) 2 increases, flame speed, flame luminescence intensity, flame temperature and deflagration pressure all show different degrees of inerting behavior. The addition of ultrafine Mg(OH) 2 not only causes partial inerting on the explosion flame, but also the heat dissipation of solid inert particles affects the acceleration of its propagation. The explosion flame propagation is inhibited by the synergistic effect of inert gas-solid phase, which attenuates the risk of starch explosion. The gas-solid synergistic inerting mechanism of starch explosion flame propagation by ultrafine Mg(OH) 2 is further revealed.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ENVIRONMENTAL MANAGEMENT
·
2020
·
IF 5.647
Shuo Li,Jia Liu,Tianwei Tan,Jiapei Nie,Huili Zhang
To reduce the emission of greenhouse gases, the substitution of fossil fuel by renewable energy sources is increasingly important. Matching energy supply and demand is however required, even more so if intermittent renewable energy sources are employed. Thermal energy storage then offers significant advantages. Thermo-chemical energy storage systems, using reversible reactions, have a high reaction enthalpy that exceeds the storage capacities of sensible and latent heat modes. Magnesium hydroxide is a candidate TCES material for such a system at temperature around 300 °C, and adaptable when doping Mg(OH) 2 with metal salts. Both pure Mg(OH) 2 and its composites with 1, 3, 6 and 10 wt% LiNO 3 are studied. The present work validates this TCES process and develops reaction rate equations needed for its design. The LiNO 3- doping significantly reduces the onset temperature of dehydration. For pure Mg(OH) 2 , the temperature is 325 °C. It is reduced to 289 °C when 1 wt% LiNO 3 is present, and further reduced to 269 °C at a dosage of 10 wt% LiNO 3 . Whereas the dehydration of pure Mg(OH) 2 is slow, with a rate constant k of 1.72 10 −5 s −1 at 300 °C, adding increasing amounts of LiNO 3 progressively increases the reaction rate constant to ~10 −2 s −1 at 300 °C when 10 wt% LiNO 3 is present. The kinetic expressions enable to predict the conversion yield and amount of heat stored or released for any desired temperature and selected duration of the heat-induced dehydration. LiNO 3- doped Mg(OH) 2 have a high potential in TCES applications when the heat source is available at temperatures between 250 and 400 °C, since the equilibrium temperature and the extent of de-hydration Mg(OH) 2 can be tuned to the required temperature range by adding different wt% of LiNO 3 .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2015
·
IF 3.942
Cen Tang,Yanxia Jin,Jiqing Lu,Xiaonian Li,Guanqun Xie,Mengfei Luo
A series of Mg catalysts supported on SiO 2 were prepared by an incipient wetness impregnation method and tested for gas phase dehydrochlorination of 1,1,2-trichloroethane. It was found that these catalysts were very active and selective for the reaction. The catalytic performance depended on the Mg loading rather than the Mg precursors as the catalysts using Mg(NO 3 ) 2 ·6H 2 O and MgCl 2 ·6H 2 O as the precursors showed the similar performance. A catalyst containing 10 wt.% of Mg showed the best performance with a steady state TCE conversion of 92% and cis -dichloroethene selectivity of 91%. Moreover, characterizations of the catalysts revealed the formation of Cl-containing Mg species on the surface during the reaction. The analyses of the compositions of the stable catalysts under working conditions indicated a Cl/Mg ratio of 1, suggesting that Mg(OH)Cl could be the active sites for the reaction.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2013
·
IF 5.008
Chaoran Li,Zanyong Zhuang,Feng Huang,Zhicheng Wu,Yangping Hong,Zhang Lin
Treatment of wastewater containing low-concentration yet highly-expensive rare earth elements (REEs) is one of the vital issues in the REEs separation and refining industry. In this work, the interaction and related mechanism between self-supported flowerlike nano-Mg(OH)2 and low-concentration REEs wastewater were investigated. More than 99% REEs were successfully taken up by nano-Mg(OH)2. Further analysis revealed that the REEs could be collected on the surface of Mg(OH)2 as metal hydroxide nanoparticles (<5 nm). An ion-exchange model was proposed as a critical factor for both guaranteeing the reaction speed and maintaining the self-supported structure of the materials. In addition, a method was developed to further separate the immobilized REEs and the residual magnesium hydroxide by varying the solution pH. In a pilot-scale experiment, the REEs from practical wastewater were immobilized effectively at a high flow rate. We anticipate this work can provide a good example for the recycling of valuable REEs in practical industrial applications.
✓ 已验证
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Haonan Ma,Chi Zhang,Long Chen,Mengning Xi,Zhiqiang Wang,Zheng Ni,Kecheng Zhu,Hanzhong Jia
Sorption processes at the mineral–water interface are of great importance in dominating the fate and availability of metalloid contaminants in natural environment. Aiming at a thorough understanding of the complexation of antimony (Sb) on metal hydroxide, we conducted first-principles molecular dynamic (FPMD) simulations and batch adsorption experiments to elucidate the quantitative mechanism of Sb complexation on Mg(OH) 2 . Batch experiments showed the sorption of Sb(III) is nearly pH-independent, while increasing pH markedly weakened Sb(V) sorption; the measured sorption isotherm curves were well fitted by Langmuir model. Subsequently, molecular-level mechanism of Sb(V)/Sb(III) on brucite basal and edge surfaces were revealed by FPMD, including microscopic surface reactive sites, local complexing structures and coordination geometries, and complexing free energies. Results showed that Sb(III)/Sb(V) can form outer-sphere complexation on basal surface by hydrogen bonding. On edge surface, Sb(III)/Sb(V) formed stable inner-sphere mononuclear monodentate and binuclear bidentate complexes. The calculated free energies indicated that the binuclear bidentate complexing was more favorable than monodentate structure, and the complexation of Sb(III) was more stable than Sb(V). Accordingly, reaction pathway of the ligand exchange and thermodynamic stability of the different inner-sphere complexes were clarified. This study provides theoretical basis for evaluating the environmental risk of Sb and improving the engineering efficiency of Sb-contaminated water management.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED ENERGY
·
2020
·
IF 8.848
J. Yan,Z.H. Pan,C.Y. Zhao
Thermochemical heat storage uses a reversible chemical reaction to store thermal energy. This thermal energy storage method has high energy density and allows long-term thermal energy storage. MgO/Mg(OH) 2 is a promising reversible reaction for thermochemical heat storage systems. The performance of this reversible reaction inside a reactor plays a key role in its practical applications. The direct type heat transfer reactor is a novel design compared with an indirect powder bed reactor. It allows the gaseous heat transfer fluid to flow through the powder in order to break the heat transfer limitation from the heat exchanger between the MgO/Mg(OH) 2 powder and the heat transfer fluid. In this study, we evaluated the performance of a direct type MgO/Mg(OH) 2 reactor under various operating conditions. Parametric analyses indicated that the heat output is limited by the reaction rate rather than the heat transfer efficiency. Results also showed the best bed thickness in order to achieve the highest temperature output. Material characterization indicated that the MgO/Mg(OH) 2 particles did not agglomerate with each other after 15 heat charging and discharging cycles.
✓ 已验证
产品关联
DOI
高影响因子
PHYSICA B-CONDENSED MATTER
·
2026
·
IF 3.2
Chang Feng,Qian Jing,Li Tang,Jiangping Jing,Ruiling Wang,Zhuoyuan Chen
S-C 3 N 4 /Mg(OH) 2 heterojunction photocatalyst was synthesized via a simple ball-milling method. • S-C 3 N 4 /Mg(OH) 2 exhibited significantly enhanced photocatalytic performance. • S-C 3 N 4 /Mg(OH) 2 demonstrated stable photocatalytic activity in complex ionic environments. • The photocatalytic reaction mechanism of S-C 3 N 4 /Mg(OH) 2 was proposed in this work. This work fabricated a type II 2D/2D S-doped graphitic carbon nitride/magnesium hydroxide (S-C 3 N 4 /Mg(OH) 2 ) heterojunction photocatalyst via a straightforward ball-milling method. The Mg(OH) 2 nanosheets are uniformly dispersed on the surface of S-C 3 N 4 , forming a well-developed heterojunction structure. The S-C 3 N 4 /Mg(OH) 2 composite material was employed as a photocatalyst and exhibited high efficiency in degrading tetracycline and methyl orange in an aqueous environment. The optimized S-C 3 N 4 /Mg(OH) 2 -30 composite demonstrated superior photocatalytic performance, achieving 100% removal of tetracycline within 45 min and 93% degradation of methyl orange within 60 min. Its performance was significantly superior to that of the single-component photocatalysts, and it exhibited stable photocatalytic activity even in complex ionic environments. The formation of Type-II heterojunction between S-C 3 N 4 and Mg(OH) 2 facilitates charge separation/migration and thus significantly enhanced pollutant removal efficiency. The S-C 3 N 4 /Mg(OH) 2 composite material fabricated in this work shows great promise for practical wastewater treatment applications. The S-C 3 N 4 /Mg(OH) 2 heterojunction photocatalyst was successfully fabricated. It not only exhibits outstanding photocatalytic performance in degrading organic pollutants but also maintains stable photocatalytic degradation ability even under complex ionic conditions. Download: Download high-res image (368KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HYDROLOGY
·
2026
·
IF 6.3
Bowen Li,Tingting Yang,Shibin Liu,Meng Yao,Jun Dong
The uneven distribution of colloidal Mg(OH) 2 in heterogeneous porous media poses a significant challenge for its effective application in groundwater remediation. To address this issue, this study introduces a novel approach using xanthan gum (XG) as a viscosity modifier to enhance the migration of colloidal Mg(OH) 2 into low permeability zone. Results indicate that XG is highly compatible with colloidal Mg(OH) 2 , viscosity modified colloidal Mg(OH) 2 (VMC-Mg(OH) 2 ) exhibits significant shear thinning properties. The increased viscosity effectively reduces the deposition of colloidal Mg(OH) 2 and facilitates its return to groundwater. With the addition of XG to the system, the collision efficiency ( η ) between colloidal Mg(OH) 2 and porous media decreased from 0.00865 to 0.00142, while the attachment efficiency ( α ) was reduced from 0.4858 to 0.1038. These variations notably enhance the migration performance of colloidal Mg(OH) 2 , with C/C 0 increasing from 0.12 to 0.94. The incorporation of XG also leads to a substantial increase in colloidal Mg(OH) 2 sweep efficiency in low permeability zone, rising from 53.6 % to 92.5 % as the XG concentration increased from 0 mg/L to 200 mg/L. Moreover, the simulation of collision efficiency ( η ) and attachment efficiency ( α ) accurately predicts the migration of VMC-Mg(OH) 2 in heterogeneous porous media, with a maximum error of 5.39 %. These findings highlight the significant potential of VMC-Mg(OH) 2 as a reactive reagent for remediating contamination in low permeability zone
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）