计算溶液所需的质量、体积或浓度。
用于金黄色葡萄球菌的选择性分离培养。
培养基配方(g/L):
| 组分 | 含量 |
| 胨 | 10.0g |
| 牛肉浸出粉 | 1.0g |
| 甘露醇 | 10.0g |
| 氯化钠 | 75.0g |
| 酚磺酞 | 0.025g |
| 琼脂 | 14.0g |
| pH (25℃) | 7.4± 0.2 |
使用说明:
称取本品 110.0 克于 1L 蒸馏水或去离子水中,煮沸溶解 1 分钟,补水至 1000mL,分装,121℃ 灭菌 15 分钟或 116℃ 30 分钟,灭菌结束后请摇匀以防琼脂沉底于底部而凝固,冷至 55℃ 左右,备用。
注意事项:
1、配制前请保证所需器材洁净。
2、为了您的安全和健康,请穿实验服并戴一次性手套操作。
For selective isolation and cultivation of Staphylococcus aureus.
Medium Formula (g/L):
| Component | Content |
| Peptone | 10.0g |
| Beef Extract | 1.0g |
| D-Mannitol | 10.0g |
| Sodium Chloride | 75.0g |
| Phenol Red | 0.025g |
| Agar | 14.0g |
| pH (25℃) | 7.4±0.2 |
Instructions for Use:
Weigh 110.0 g of this product into 1 L of distilled or deionized water, boil and dissolve for 1 minute. Make up the volume to 1000 mL, dispense, autoclave at 121 ℃ for 15 minutes or at 116 ℃ for 30 minutes. Thoroughly mix immediately after autoclaving to prevent agar sedimentation at the bottom during solidification. Cool to approximately 55 ℃ for use.
Precautions:
1. Ensure all required apparatus are clean before preparation.
2. Wear a lab coat and disposable gloves during operation for your safety and health.
我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。
查看 BioReagent 级别指南 → 查看 Suitable for microbiology 级别指南 →