计算溶液所需的质量、体积或浓度。
BioReagent 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。
2-8°C储存。低温运输 。请查阅批次 COA 获取详细规格。
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
| 组分货号 | 组分名称 | 物理外观 | 50L | 储存 |
| M1529609A | A 液体 | 液体 | 500ml×2 | 2-8℃ |
| M1529609B | B 液体 | 液体 | 500ml | 2-8℃ |
| M1529609C | C 液体 | 液体 | 500ml | 2-8℃ |
| M1529609D | D 液体 | 液体 | 25ml | 2-8℃ |
使用说明
1、1L 1/2MS 工作液配置方法:
①在 1L 烧杯里面加入 10mL A 液、5mL B 液、5mL C 液、500μL D 液,定容至 1L。
②混合好后,每 1L 加入约 70μL 0.5 M NaOH 调节 pH 到 5.8。
③120℃,灭菌 20min。
2、1L MS 工作液配置方法:
① 在 1L 烧杯里面加入 20mL A 液、10mL B 液、10mL C 液、500μL D 液,定容至 1L。
② 混合好后,每 1L 加入约 70μL 0.5 M NaOH 调节 pH 到 5.8。
③ 120℃,灭菌 20min。
注:本产品不含蔗糖和琼脂。蔗糖推荐添加量为 30 g/L;若实验需要上述组分,可自行配制或联系我司采购。
注意事项
1、试剂开封后请尽快使用,以防影响后续实验效果。
2、为了您的安全和健康,请穿实验服并戴一次性手套操作。
3、本品为实验室科研用试剂,仅供科研实验使用,不可用于人体、临床诊断、食品及家庭用途等。
This product consists of four components: Solution A, Solution B, Solution C and Solution D. It is optimized from MS basal salts and contains organic components.
Contents & Storage
| Component No. | Component Name | Appearance | 50L | Storage |
| M1529609A | A Liquid | Liquid | 500ml×2 | 2-8℃ |
| M1529609B | B Liquid | Liquid | 500ml | 2-8℃ |
| M1529609C | C Liquid | Liquid | 500ml | 2-8℃ |
| M1529609D | D Liquid | Liquid | 25ml | 2-8℃ |
Instructions for Use
1. Preparation method for 1 L 1/2MS working solution:
① Add 10 mL Solution A, 5 mL Solution B, 5 mL Solution C and 500 μL Solution D into a 1 L beaker, then make up the volume to 1 L.
② After mixing, add approximately 70 μL of 0.5 M NaOH per liter to adjust the pH to 5.8.
③ Sterilize at 120 ℃ for 20 min.
2. Preparation method for 1 L MS working solution:
① Add 20 mL Solution A, 10 mL Solution B, 10 mL Solution C and 500 μL Solution D into a 1 L beaker, then make up the volume to 1 L.
② After mixing, add approximately 70 μL of 0.5 M NaOH per liter to adjust the pH to 5.8.
③ Sterilize at 120 ℃ for 20 min.
Note: This product does not contain sucrose or agar. The recommended addition amount of sucrose is 30 g/L. If the above components are required for experiments, you may prepare them yourself or purchase from our company.
Precautions
1. Please use the reagent as soon as possible after opening to avoid affecting subsequent experimental results.
2. For your safety and health, wear a lab coat and disposable gloves during operation.
3. This product is a laboratory research reagent for research use only. It shall not be used for human applications, clinical diagnosis, food, household purposes, etc.