镍柱原位再生试剂盒

货号: N15058034
有货
级别和纯度: 无菌过滤 ? 除菌过滤 —— 经 0.2µm 过滤去除微生物。作为即用无菌溶液用于培养和敏感应用。 BioReagent ? 生物试剂级(BioReagent)—— 经测试适用于生命科学和分子生物学。适用于需要生物相容性的细胞培养、检测和生化工作。
★
规格
库存
价格
数量
20T
N15058034-20T
期货 Stock Image
¥369.90
请输入您要添加的产品数量
🧪
为什么选择此级别

BioReagent,无菌过滤 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

2-8°C储存,避光。常规运输 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。

概述

镍柱纯化是为了纯化带有His标签的重组蛋白而设计,它具有高度的亲和力和选择性。反复使用后其镍离子会不可避免的逐渐流失,结合效率会有所下降,需用简单再生后才可再使用。当镍柱介质的颜色由浅蓝色变成灰褐色或白色时,则镍离子已经从柱子中丢失,镍柱介质需彻底再生后才能使用。为此开发了镍柱原位再生试剂,它具有下列特点:

1. 即开即用,不用单独准备各种溶液。

2. 原位再生,直接在亲和层析柱中进行所有再生处理,免去繁琐的装柱步骤。

3. 操作步骤简单,半小时即可完成。

4. 适用于各种含镍介质(包括Ni-NTA或Ni-IDA)。

5. 本产品可以再生已经装有1 mL镍柱介质的层析柱20次。

6. 本产品仅供科研使用。

使用方法

镍柱介质对His标记蛋白结合降低(蓝色越来越淡)时需要按下列步骤再生,如果是污染了其他蛋白和杂质,则需要另购镍柱原位清洗试剂盒。 

1. 用10倍介质体积的溶液A洗涤镍柱。对1 mL的镍柱介质(可能是装在 6-7 mL的层析柱中),需要用10 mL溶液A洗涤。 

2. 用10-20倍介质体积的自备去离子水洗涤镍柱。对于1 mL的镍柱介质,需要10 mL去离子水。 

3. 用5倍介质体积的溶液B洗涤镍柱,镍柱的颜色将变成蓝绿色。 

4. 用10倍介质体积的自备去离子水洗涤镍柱后即可使用。如果需要保存镍柱,则封住层析柱的下端出口,加入20%乙醇溶液覆盖镍柱介质,再盖上层析柱的上端口即可4℃长期保存。

Nickel column purification is designed for the purification of recombinant proteins tagged with six histidine residues (basic amino acids), featuring high affinity and excellent selectivity. When purifying the same target protein, the nickel column medium can be reused 3 to 5 times without regeneration. After repeated use, bound nickel ions will gradually leach out inevitably, leading to decreased binding capacity after 3-5 runs, thus simple regeneration is required for further application. When the color of nickel column medium changes from light blue to grayish brown or pure white, it indicates severe loss of nickel ions, and the medium must be fully regenerated before reuse. This nickel column in-situ recharge kit is developed to solve this problem, with the following advantages:

1. Achieve thorough in-situ cleaning and regeneration of nickel column medium, effectively restore its binding activity.

2. Ready-to-use formula, no extra buffer preparation required.

3. Complete all regeneration procedures directly inside the affinity column, eliminating tedious column packing operations.

4. Simple operation procedures, and the whole process can be finished within half an hour.

5. Compatible with all common nickel-charged media including Ni-NTA and Ni-IDA resins.

6. Sufficient reagents for full regeneration treatment of 1 mL nickel column medium for 20 times.

7. For research use only.

Instruction for use 

Perform regeneration timely when the His-tag protein binding capacity declines and the light blue color of resin fades obviously. For columns severely contaminated with miscellaneous proteins and impurities, please use dedicated nickel column in-situ cleaning kit separately. 

1. Wash the nickel column with Solution A at 10 times the volume of resin. For 1 mL nickel resin packed in 6-7 mL chromatography column, use 10 mL Solution A for washing.

2. Rinse the column with self-prepared deionized water at 10 times resin volume; 10 mL deionized water is needed for 1 mL resin.

3. Flush the column with Solution B at 5 times resin volume, and the resin will recover to light blue-green color.

4. Rinse again with 10 times volume of self-prepared deionized water, then the column is ready for subsequent purification.For long-term storage, seal the column outlet, cover the resin with 50% ethanol solution, seal the upper port, and store at 2-8℃.

规格

别名
镍柱在位重生试剂盒 | 镍琼脂糖层析柱再生试剂盒
英文别名
Ni-Agarose Column in situ Recharge Kit | Ni Column In-Place Regeneration Kit
规格或纯度
无菌过滤,BioReagent
英文名称
Ni-Agarose Column In-Place Recharge Kit
应用
Purification
储存与运输
储存条件
2-8°C储存,避光
运输条件
常规运输
稳定性与储存
各组分在相应的储存条件下保质期一年。
组分与储存
N15058034ComponentsAppearance20TStorageQuantity Per Test
N15058034A溶液AColourless liquid  
200 mL2-8℃, Store in the dark. 
Use as per requirements
N15058034B溶液BBlue-green transparent liquid
100 mL2-8℃, Store in the dark. Do not freeze
Use as per requirements
注:每个Test推荐Ni填料使用量为1 mL

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:
溶液计算器

常见问题

什么是「无菌过滤」?
「无菌过滤」表示该物料经过加工和检测,适用于特种工业加工。规格侧重于影响该应用性能的杂质——例如,电子应用的金属含量、电池应用的粒度、光学应用的折射率,或对水分敏感工艺的水分含量。
什么是「BioReagent」?
「BioReagent」表示该产品经过加工和检测,适用于生物和生化应用。规格可能包括内毒素限值、微生物控制、无菌性、低 DNase/RNase/蛋白酶活性,以及在相关情况下的生物活性验证。
本产品应如何储存?
请于2–8 °C、避光条件下保存。本品对光敏感,请保存在原始的避光或棕色容器中。
本产品如何运输?
本产品按常温标准条件运输,无需温控包装。
如何获取批次专用COA?
每个订单都会随附分析证书(COA),您也可以从账户订单历史中下载。如需订购前的COA,请联系您的客户代表,或使用PDP上的"申请COA"按钮——我们将提供代表性批次的COA。

需要帮助选择级别?

我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。

查看 Sterile-filtered 级别指南 → 查看 BioReagent 级别指南 →