计算溶液所需的质量、体积或浓度。
BioReagent,适用于微生物学 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。
避光,室温。常规运输 。请查阅批次 COA 获取详细规格。
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
| 硫酸铵 | 0.5 |
| 氯化钠 | 0.3 |
| 七水硫酸亚铁 | 0.03 |
| 七水硫酸镁 | 0.03 |
| 二水磷酸二氢钠 | 0.204 |
| 十二水磷酸氢二钠 | 2.6 |
使用说明:
称取本品 3.664g 于 1L 蒸馏水或去离子水中,加热煮沸至完全溶解,分装,121℃ 高压灭菌 15 分钟,冷却,备用。
注意事项:
1. 操作时避免与皮肤、眼睛直接接触,如不慎接触,请立即用大量清水冲洗。
2. 本品仅用于实验室科研实验,不可用于临床诊断。
This product can be used for the detection of nitrifying bacteria. It is suitable for the qualitative examination of nitrifying bacteria in samples such as water bodies and bacterial agents, to determine the presence of nitrifying bacteria in samples.
Medium Formula (g/L)
| (NH₄)₂SO₄ | 0.5 |
| NaCl | 0.3 |
| FeSO₄·7H₂O | 0.03 |
| MgSO₄·7H₂O | 0.03 |
| NaH₂PO₄·2H₂O | 0.204 |
| Na₂HPO₄·12H₂O | 2.6 |
Instructions for Use:
Weigh 3.664 g of this product and add to 1 L distilled or deionized water. Heat and boil until fully dissolved, dispense, autoclave at 121 ℃ for 15 minutes, cool, and set aside for use.
Precautions:
1. Avoid direct contact with skin and eyes during handling. In case of accidental contact, immediately flush with plenty of clean water.
2. This product is for laboratory research only and must not be used for clinical diagnosis.
我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。
查看 BioReagent 级别指南 → 查看 Suitable for microbiology 级别指南 →