毕赤酵母用PTM1微量元素母液

货号: P1524575
有货
级别和纯度: 无菌过滤 ? 除菌过滤 —— 经 0.2µm 过滤去除微生物。作为即用无菌溶液用于培养和敏感应用。 BioReagent ? 生物试剂级(BioReagent)—— 经测试适用于生命科学和分子生物学。适用于需要生物相容性的细胞培养、检测和生化工作。 用于显微镜 ? 显微镜级 —— 适用于样品制备和成像的试剂/染料。适用于需要清晰度和低背景的显微镜检查。
别名
毕赤酵母发酵PTM1微量元素补充液 | 毕赤酵母诱导表达PTM1微量金属离子母液
储存条件
室温
运输条件
常规运输
应用
Microbial culture
★
规格
库存
价格
数量
100ml
P1524575-100ml
现货 Stock Image
¥229.90
500ml
P1524575-500ml
现货 Stock Image
¥789.90
请输入您要添加的产品数量
🧪
为什么选择此级别

BioReagent,无菌过滤,用于显微镜 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

室温。常规运输 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。

概述

PTM 是 PichiaTrace Minerals 的缩写,意为毕赤酵母微量元素,PTM1 是 PichiaPink1、2、3、4 系列菌株常用的一种 发酵用微量元素配方,不在种子液或接菌时发酵初始培养基中使用,多在流加营养液时添加,现也用于其他毕赤酵母发酵过 程的流加试验中。毕赤酵母的发酵过程分为四个阶段:1, 种子液培养阶段;2, Glycerolbatchphase,接菌开始到初始培 养基中甘油被用完的阶段,这一阶段的主要目的是积累细胞,为后续诱导表达做准备;3, 甘油流加阶段,此阶段不诱导蛋 白表达,仅用于增加生物量;4, 甲醇流加诱导阶段,此阶段主要用来诱导蛋白;PTM1 主要用于后两个阶段。

产品组分与配方:

产品组分PTM1 微量元素母液配方(g/L)
五水硫酸铜6
碘化钠0.08
一水硫酸锰3
二水钼酸钠0.2
硼酸0.02
氯化钴0.5
氯化锌20
七水硫酸亚铁65
生物素0.2
硫酸按需配制

使用方法:

PTM1 已经 0.22um 过滤除菌,可直接添加使用。PTM1 微量元素母液,主要为毕赤酵母发酵试验补充微量元素,不同毕赤酵母发酵方法不同,具体要参考所用 protocol,比如常用的 PichiaPink 1、2、3、4 酵母菌株,甘油流加阶段:启动 50% 甘油 (含12mL/LPTM1) 流加,速率为 5–15mL/(h・L 初始发酵体积),持续 4 小时以上,使湿细胞重增至 150–220g/L。

注意事项:

1、 PTM1 微量元素母液为 0.22um 过滤除菌,可直接使用;若发现有杂菌污染,停止使用。

2、 PTM1 微量元素母液因浓度过高,底部可能会有少量沉淀产生,不影响使用,加入培养基后会重新溶解。

PTM is the abbreviation for Pichia Trace Minerals, referring to trace elements specially formulated for Pichia pastoris. PTM1 is a trace element formula for fermentation widely applied to the PichiaPink 1, 2, 3 and 4 strain series.It is not added to seed culture medium or the initial fermentation medium at inoculation, and is mostly supplemented together with fed-batch nutrients. At present, it is also adopted in fed-batch trials for fermentation of other Pichia pastoris strains.The fermentation process of Pichia pastoris consists of four phases:1. Seed culture stage. 2.Glycerol batch phase: the period from inoculation until complete depletion of glycerol in the initial medium. This phase mainly aims to accumulate biomass and prepare for subsequent induced protein expression.3.Glycerol fed-batch phase: no protein induction is carried out in this stage, whose sole purpose is to boost biomass concentration.4. Methanol fed-batch induction phase: this phase is dedicated to inducing target protein expression.

Product Composition and Formula:

Product CompositionContent (g/L)
CuSO₄·5H₂O6
NaI0.08
MnSO₄·H₂O3
Na₂MoO₄·2H₂O0.2
H₃BO₃0.02
CoCl₂0.5
ZnCl₂20
FeSO₄·7H₂O65
Biotin0.2
H₂SO₄Prepare as needed

Instructions for Use:

PTM1 is sterile-filtered through a 0.22 μm filter and can be added directly for use.PTM1 Trace Element Stock Solution is designed to supplement trace elements during Pichia pastoris fermentation experiments.Fermentation protocols differ for various Pichia pastoris strains, so please follow your specific protocol accordingly.Taking the commonly used PichiaPink 1, 2, 3 and 4 strains as an example:During the glycerol fed-batch phase, start feeding 50% glycerol solution supplemented with 12 mL/L PTM1 at a feeding rate of 5–15 mL/(h·L initial fermentation volume). Continue feeding for no less than 4 hours until the wet cell weight reaches 150–220 g/L.

Precautions:

1. This PTM1 Trace Element Stock Solution has undergone 0.22 μm sterile filtration and is ready for direct use. Discontinue use immediately if bacterial contamination is detected.

2. A small amount of precipitate may form at the bottom of the solution due to its high concentration. This does not affect product performance, and the precipitate will dissolve completely once mixed into the culture medium.

规格

别名
毕赤酵母发酵PTM1微量元素补充液 | 毕赤酵母诱导表达PTM1微量金属离子母液
英文别名
PTM1 Trace Salts Stock Solution | PTM1 Trace Salts Solution
规格或纯度
BioReagent, 用于显微镜, 无菌过滤
稳定性与储存
Store at room temperature long term (24 months).
英文名称
PTM1 Trace Elements Stock Solution for Pichia pastoris
储存条件
室温
运输条件
常规运输
产品线
生物产品
名称和识别符
分子类型
生物试剂/缓冲液

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到2个结果

批号(Lot Number) 证书类型 货号
ZJ26F0838467 分析证书 P1524575
ZJ26F0838466 分析证书 P1524575
技术文档和文章
溶液计算器

常见问题

本产品应如何储存?
请于室温条件下保存。
本产品如何运输?
本产品按常温标准条件运输,无需温控包装。
如何获取批次专用COA?
每个订单都会随附分析证书(COA),您也可以从账户订单历史中下载。如需订购前的COA,请联系您的客户代表,或使用PDP上的"申请COA"按钮——我们将提供代表性批次的COA。
什么是「无菌过滤」?
「无菌过滤」表示该物料经过加工和检测,适用于特种工业加工。规格侧重于影响该应用性能的杂质——例如,电子应用的金属含量、电池应用的粒度、光学应用的折射率,或对水分敏感工艺的水分含量。
什么是「无菌过滤」?
「无菌过滤」表示该物料经过加工和检测,适用于特种工业加工。规格侧重于影响该应用性能的杂质——例如,电子应用的金属含量、电池应用的粒度、光学应用的折射率,或对水分敏感工艺的水分含量。
什么是「BioReagent」?
「BioReagent」表示该产品经过加工和检测,适用于生物和生化应用。规格可能包括内毒素限值、微生物控制、无菌性、低 DNase/RNase/蛋白酶活性,以及在相关情况下的生物活性验证。