计算溶液所需的质量、体积或浓度。
,适用于对基线干扰要求严格的色谱和分析工作流程。
室温。 。请查阅批次 COA 获取详细规格。
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
Description
Room-temperature nickel metallizing (RTM) process for alumina ceramics and other dielectric materials - strongly bonded nickel can be plated, soldered, brazed or welded.The RTM process is applicable to metallizing alumina substrates in hybrid and microcircuits, insulated heat sinks, ceramic tubes, windows and terminals. Strong bond structures are produced. Structures with hermetic seals are formed as well.The RTM process is also useful for metallizing barium titanate and ferrites. In addition, many polymeric materials, notable polyesters, epoxies, cellulosics, mylar and acrylonitrile-butadiene-styrene (ABS terpolymer) may be metallized following suitable modifications of the etch (Solution A).RTM lends itself productively to the application of photolithographic technology using photo resist materials to register metallization patterns. In this manner, conductive pads may be formed for thin film and hybrid circuits. Base plates for building capacitor structures are also quite feasible.
H271: 可能引起火灾或爆炸; 强氧化剂
H290: 可能腐蚀金属
H314: 造成严重的皮肤灼伤和眼睛损伤
H317: 可能引起皮肤过敏反应
H334: 吸入可能引起过敏或哮喘病症状或呼吸困难
H340: 可能导致遗传缺陷
H350: 可能导致癌症
H361f: 怀疑破坏生育力
H373: 通过长时间或反复暴露对器官造成损害
H411: 对水生生物有毒并具有长期持续影响
H302+H332: 吞咽或吸入有害。
P201: 使用前获取特殊说明
P210: 远离热源,热表面,火花,明火和其他点火源。 - 禁止抽烟。
P220: 远离衣物和其他可燃物。
P260: 不要吸入灰尘/烟雾/气体/雾/蒸汽/喷雾。
P273: 避免释放到环境中。
P280: 戴防护手套/穿防护服/戴防护眼罩/戴防护面具。
P391: 收集溢出物
P308+P313: 如接触到或有疑虑:求医/就诊。
P370+P378: 火灾时:使用干砂、干粉或抗醇泡沫灭火。
P371+P380+P375: 在发生大火和大量泄漏:撤离现场。因有爆炸危险,须远距离救火。
P304+P340+P312: 如误吸入:将人转移到空气新鲜处,保持呼吸舒适体位。如感觉不适,呼叫急救中心/医生。