计算溶液所需的质量、体积或浓度。
为什么选择此级别
，适用于对基线干扰要求严格的色谱和分析工作流程。
储存与运输
室温。 。请查阅批次 COA 获取详细规格。
质量文档
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
文献证明
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
概述
Description
Sandy architectural 3D printing filamentDeveloped specifically for architecture, design and archeological fields.Polymers are mixed with marble powders to realize architectural objects with ease.Sand-finish your objects with exceptional tactile feeling.Polish your objects with fine sandpaper and water. No more support-removing problems.Material PropertiesWater absorption: 0.2%Tensile modulus: 2500 GPaVicat softening temperature: 102 °CCharpy impact at 23°C: 8 ft·lb/in2Charpy impact at -30°C: 3 ft·lb/in2MFR: 4g/10 minSandy 3D Printing ParametersExtruder (nozzle) temperature: 230 +/- 10 °CBed temperature: 100 +/- 10 °CPrint speed: 60-70 mm/sFan: 0-20 %Minimum nozzle diameter: 0.35 mmPlate materials: blue tape, kapton tape, etc.
Description
Sandy architectural 3D printing filamentDeveloped specifically for architecture, design and archeological fields.Polymers are mixed with marble powders to realize architectural objects with ease.Sand-finish your objects with exceptional tactile feeling.Polish your objects with fine sandpaper and water. No more support-removing problems.Material PropertiesWater absorption: 0.2%Tensile modulus: 2500 GPaVicat softening temperature: 102 °CCharpy impact at 23°C: 8 ft·lb/in2Charpy impact at -30°C: 3 ft·lb/in2MFR: 4g/10 minSandy 3D Printing ParametersExtruder (nozzle) temperature: 230 +/- 10 °CBed temperature: 100 +/- 10 °CPrint speed: 60-70 mm/sFan: 0-20 %Minimum nozzle diameter: 0.35 mmPlate materials: blue tape, kapton tape, etc.
规格
规格或纯度
sandy effect, 直径1.75mm
英文名称
Sandy architectural 3D printing filament
储存条件
室温
名称和识别符
分子类型
小分子
技术文档
高级数据
质检证书（CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:
溶液计算器
产品仅提供给经过验证的企业、机构和合格的专业人员用于研发。不适用于人类、动物、诊断或治疗。
Copyright © 2023至今 上海阿拉丁生化科技股份有限公司 保留所有权利。
危险品化学品经营许可证（带存储）