H2617566计算溶液所需的质量、体积或浓度。
为什么选择此级别
，适用于对基线干扰要求严格的色谱和分析工作流程。
储存与运输
2-8°C储存。低温运输 。请查阅批次 COA 获取详细规格。
质量文档
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
文献证明
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
概述
DRYING：Typical drying temperature may range from 120-200°C (248-392°F) depending on temperature tolerance of the substrate.Drying time may range from 2-30 minutes.Higher drying temperature and/or longer drying times will result in better electrical performance, adhesion and mechanical properties.
Optimum drying conditions should be established for particular equipment used by the customer.
PRINTING：AST6025 is supplied as ready-to-use ink. It should be stirred well prior to printing. AST6025 is suitable for use on hand, semi-automatic or fully automatic screen printing machines.
Typically, polyester or stainless screens with mesh count 325-430 threads/inch can be used depending on desired ink film thickness and resolution. For fine lines between 100 - 250 microns nominal line width, stainless screen mesh is preferred with mesh count between 325-400 threads/inch. For <100 microns line widths, 430 and higher stainless steel mesh counts are recommended.
Description
SunTronic Conductive Silver Ink AST6025 is a screen printable conductive ink specifically designed for printing fine line and fine pitch conductive traces.The ink exhibits high viscosity, low slumping, excellent conductivity and environmental stability, and adhesion to various substrates, including glass, various metals, PET, and transparent conductive films.AST6025 is specifically suitable for printing of fine interconnects, printed RF antennae, and bus bars for touch panels.
规格
英文别名
silver ink, conductive ink, Ag ink, SunTronic AST6025
英文名称
SunTronic® conductive silver ink for screen printing
储存条件
2-8°C储存
运输条件
低温运输
法律信息
SunTronic is a registered trademark of Sun Chemical, Inc.
名称和识别符
分子类型
未知
技术文档
高级数据
安全和危险性（GHS）
信号词
危险
危险声明
H304: 吞咽并进入呼吸道可能致命
H318: 造成严重的眼睛损伤
H336: 可能引起嗜睡或头晕
H351: 怀疑引起遗传缺陷
H410: 对水生生物有剧毒并具有长期持续影响
预防措施声明
P201: 使用前获取特殊说明
P273: 避免释放到环境中。
P280: 戴防护手套/穿防护服/戴防护眼罩/戴防护面具。
P308+P313: 如接触到或有疑虑：求医/就诊。
质检证书（CoA,COO,BSE/TSE 和分析图谱)
溶液计算器
常见问题
本产品应如何储存？
请于2–8 °C条件下保存。需冷藏保存以维持规定的有效期。
本产品如何运输？
本产品采用湿冰冷藏运输。收货后请立即拆包，并按上述储存条件保存。
如何获取批次专用COA？
每个订单都会随附分析证书（COA），您也可以从账户订单历史中下载。如需订购前的COA，请联系您的客户代表，或使用PDP上的"申请COA"按钮——我们将提供代表性批次的COA。
产品仅提供给经过验证的企业、机构和合格的专业人员用于研发。不适用于人类、动物、诊断或治疗。
Copyright © 2023至今 上海阿拉丁生化科技股份有限公司 保留所有权利。
危险品化学品经营许可证（带存储）