计算溶液所需的质量、体积或浓度。
为什么选择此级别
，适用于对基线干扰要求严格的色谱和分析工作流程。
储存与运输
2-8°C储存。低温运输 。请查阅批次 COA 获取详细规格。
质量文档
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
文献证明
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
概述
Description
SunTronic aqueous silver flexo ink AFT6700 is a water-based silver conductive ink designed for the production of printed antenna for radio frequency identification (RFID), conductive interconnects, and printed circuitry via flexographic printing.AFT6700 is appropriate for paper and cardboard substrates and also water-receptive polymer films and provides a unique combination of high-speed printability, fast drying, and conductivity in an easy-to-use ink system. AFT6700 can also be printed on plastic films bearing a water-receptive primer.
Preparation instructions
Processing and Handling GuidelinesPRINTINGAFT6700 is supplied as ready-for-use ink. Thinning is not recommended. Soft sediment may occur over time so thorough mixing prior to use is necessary.The below details are only a guide, and the final choice of flexo printing specifications may depend on substrate and web speed. To achieve maximum coverage, high volume anilox rolls are recommended (80-120 lpi with 14-22 BCM). As an example, thickness of 3-4 microns can be achieved with a 160 line/inch and 20 BCM ART anilox (Praxair Technology, Inc.). Print tests have demonstrated that a soft flexographic plate such as Nyloflex ART (BASF) produces the highest quality graphics when used in conjunction with a medium-hard sticky back. A closed doctor-blade chamber is recommended.Continuous anilox rotation is required throughout the print run to avoid ink drying on flexo plate and anilox roll. AFT6700 should not be allowed to dry completely on printing equipment. Prompt cleaning with water is highly recommended. Anilox rolls should be also cleaned using a sonicating bath after each print run.DRYINGAFT6700 is a fast drying ink that will dry to the touch between 150-300 feet per minute using standard dryers found on flexographic presses. Maximum conductivity can be achieved with further drying, inline or offline, using infrared (IR) dryers, high capacity forced hot air ovens and/or heated mandrels.Optimum drying conditions should be established for particular equipment used by the customer.
Description
SunTronic aqueous silver flexo ink AFT6700 is a water-based silver conductive ink designed for the production of printed antenna for radio frequency identification (RFID), conductive interconnects, and printed circuitry via flexographic printing.AFT6700 is appropriate for paper and cardboard substrates and also water-receptive polymer films and provides a unique combination of high-speed printability, fast drying, and conductivity in an easy-to-use ink system. AFT6700 can also be printed on plastic films bearing a water-receptive primer.
Preparation instructions
Processing and Handling GuidelinesPRINTINGAFT6700 is supplied as ready-for-use ink. Thinning is not recommended. Soft sediment may occur over time so thorough mixing prior to use is necessary.The below details are only a guide, and the final choice of flexo printing specifications may depend on substrate and web speed. To achieve maximum coverage, high volume anilox rolls are recommended (80-120 lpi with 14-22 BCM). As an example, thickness of 3-4 microns can be achieved with a 160 line/inch and 20 BCM ART anilox (Praxair Technology, Inc.). Print tests have demonstrated that a soft flexographic plate such as Nyloflex ART (BASF) produces the highest quality graphics when used in conjunction with a medium-hard sticky back. A closed doctor-blade chamber is recommended.Continuous anilox rotation is required throughout the print run to avoid ink drying on flexo plate and anilox roll. AFT6700 should not be allowed to dry completely on printing equipment. Prompt cleaning with water is highly recommended. Anilox rolls should be also cleaned using a sonicating bath after each print run.DRYINGAFT6700 is a fast drying ink that will dry to the touch between 150-300 feet per minute using standard dryers found on flexographic presses. Maximum conductivity can be achieved with further drying, inline or offline, using infrared (IR) dryers, high capacity forced hot air ovens and/or heated mandrels.Optimum drying conditions should be established for particular equipment used by the customer.
规格
英文别名
Silver ink, SunTronicAFT6700, Conductive ink, Ag ink
英文名称
SunTronic®aqueous silver flexo ink
储存条件
2-8°C储存
运输条件
低温运输
法律信息
SunTronic is a registered trademark of Sun Chemical, Inc.
名称和识别符
分子类型
小分子
技术文档
高级数据
安全和危险性（GHS）
信号词
警告
危险声明
H410: 对水生生物有剧毒并具有长期持续影响
预防措施声明
P273: 避免释放到环境中。
质检证书（CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:
溶液计算器
常见问题
本产品应如何储存？
请于2–8 °C条件下保存。需冷藏保存以维持规定的有效期。
本产品如何运输？
本产品采用湿冰冷藏运输。收货后请立即拆包，并按上述储存条件保存。
如何获取批次专用COA？
每个订单都会随附分析证书（COA），您也可以从账户订单历史中下载。如需订购前的COA，请联系您的客户代表，或使用PDP上的"申请COA"按钮——我们将提供代表性批次的COA。
产品仅提供给经过验证的企业、机构和合格的专业人员用于研发。不适用于人类、动物、诊断或治疗。
Copyright © 2023至今 上海阿拉丁生化科技股份有限公司 保留所有权利。
危险品化学品经营许可证（带存储）