计算溶液所需的质量、体积或浓度。
为什么选择此级别
，适用于对基线干扰要求严格的色谱和分析工作流程。
储存与运输
室温。常规运输 。请查阅批次 COA 获取详细规格。
质量文档
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
文献证明
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
概述
Description
This product is a conductive ink based on single-crystal silver nanoparticles in a mixture of propylene glycol monomethyl ether - diethylene glycol monomethyl ether solvents (PM-DGME), has been designed for Aerosol digital printing systems and low temperature sintering applications. The ink offers a unique combination of properties, including high silver loading, low viscosity, storage at ambient conditions, long shelf life, reliable jetting and good printability. Printed patterns, sinterable at low temperatures, provide low electrical resistivity, good adhesion to a wide range of substrates and durability to humid and aqueous environments.This product can be stored at room temperature.Compatible printheadsInk works well with printheads: Air BrushProduct fit for:Digital Printing (Aerosol)Printed Electronics: FPD, RFID, PCBAerosol Jet can print conformal interconnects on 3D surfaces eliminating the need for wire bonding - for example printing electrical connections on 3D stacked die or for LED chip fabrication. Components can also be printed onto 3 dimensional surfaces eliminating the need for a separate substrate thereby reducing the size, thickness and weight of the end product. For example, Aerosol Jet is used to print antennas and sensors that conform to the shape of the underlying substrate such as a cell phone case. The Aerosol Jet process also supports printing on a wide variety of substrates including plastics, ceramics and metallic structures.
Preparation instructions
Mix well before use.Electrical PropertiesSintering conditions (on glass) :UV followed by thermal (UV 9 W/cm2, 2 min (+), Thermal: 130°C/60 min)Resistivity after sintering conditions mentioned above : ≤10 μΩ·cm (≤6 bulk)Adhesion to (tested) :Kapton, PC, PC/ABS, PA, glassReliability :Adhesion survived below testing conditions (on glass):soaking in NaCl 1M for 2 hsoaking in NaCl 1M for 2 h and in DI water for 20 h
Description
This product is a conductive ink based on single-crystal silver nanoparticles in a mixture of propylene glycol monomethyl ether - diethylene glycol monomethyl ether solvents (PM-DGME), has been designed for Aerosol digital printing systems and low temperature sintering applications. The ink offers a unique combination of properties, including high silver loading, low viscosity, storage at ambient conditions, long shelf life, reliable jetting and good printability. Printed patterns, sinterable at low temperatures, provide low electrical resistivity, good adhesion to a wide range of substrates and durability to humid and aqueous environments.This product can be stored at room temperature.Compatible printheadsInk works well with printheads: Air BrushProduct fit for:Digital Printing (Aerosol)Printed Electronics: FPD, RFID, PCBAerosol Jet can print conformal interconnects on 3D surfaces eliminating the need for wire bonding - for example printing electrical connections on 3D stacked die or for LED chip fabrication. Components can also be printed onto 3 dimensional surfaces eliminating the need for a separate substrate thereby reducing the size, thickness and weight of the end product. For example, Aerosol Jet is used to print antennas and sensors that conform to the shape of the underlying substrate such as a cell phone case. The Aerosol Jet process also supports printing on a wide variety of substrates including plastics, ceramics and metallic structures.
Preparation instructions
Mix well before use.Electrical PropertiesSintering conditions (on glass) :UV followed by thermal (UV 9 W/cm2, 2 min (+), Thermal: 130°C/60 min)Resistivity after sintering conditions mentioned above : ≤10 μΩ·cm (≤6 bulk)Adhesion to (tested) :Kapton, PC, PC/ABS, PA, glassReliability :Adhesion survived below testing conditions (on glass):soaking in NaCl 1M for 2 hsoaking in NaCl 1M for 2 h and in DI water for 20 h
规格
英文别名
Ag ink, Air-brush printable, Room temperature storage Optomec aerosol jet printable Ag ink
英文名称
Silver nano ink, aerosol jet printable
储存条件
室温
运输条件
常规运输
法律信息
Lumisizer is a trademark of LUM GmbH
名称和识别符
分子类型
小分子
技术文档
高级数据
化学和物理性质
密度
2.14g/mL
质检证书（CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:
溶液计算器
产品仅提供给经过验证的企业、机构和合格的专业人员用于研发。不适用于人类、动物、诊断或治疗。
Copyright © 2023至今 上海阿拉丁生化科技股份有限公司 保留所有权利。
危险品化学品经营许可证（带存储）