计算溶液所需的质量、体积或浓度。
BioReagent,即用型,无菌过滤,用于聚丙烯酰胺凝胶电泳 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。
室温。常规运输 。请查阅批次 COA 获取详细规格。
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
该产品为用于 SDS-PAGE 电泳浓缩胶配制的缓冲液,包含:0.4%SDS,1 M Tris;pH 值 6.8,可作为浓缩的 4×浓缩胶配置缓冲液。缓冲液经过 0.22 μm 滤膜过滤除杂,可以直接使用。
注意事项:
1. 过硫酸铵配制成 10%溶液后应当-20℃保存。应尽量减少室温存放时间以防失效。
2. TEMED 有轻微刺激性气味,使用时注意防护。
3. 配胶用丙烯酰胺有神经毒性,可通过皮肤吸收,其作用具有积累性,配制时应戴手套。聚丙烯酰胺(聚合后)无毒,但也应谨慎操作,因为有可能含有少量的未聚合成份。
4. 升温可以加快凝胶的聚合时间。
5. 为了您的安全和健康,请穿实验服并戴一次性手套操作。
This buffer is used for preparing stacking gel in SDS-PAGE electrophoresis. Components: 0.4% SDS, 1 M Tris, pH 6.8. It is supplied as a 4× stock buffer for stacking gel preparation. Filtered through a 0.22 μm membrane for sterilization and ready for direct use.
Precautions
1.10% ammonium persulfate (APS) solution should be stored at −20 ℃. Minimize storage at room temperature to prevent inactivation.
2.TEMED has a slight pungent odor; wear appropriate protective equipment during handling.
3.Acrylamide for gel casting is neurotoxic, absorbable through skin with cumulative toxic effects. Wear gloves while preparing gels. Polymerized polyacrylamide is non-toxic, but handle cautiously as trace unpolymerized monomers may remain.
4.Elevated temperature accelerates gel polymerization.
5.For your safety and health, wear a lab coat and disposable gloves during operation.
| pH | 6.8 |
|---|
通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!
| 批号(Lot Number) | 证书类型 | 货号 |
|---|---|---|
| 分析证书 | T1527931 |
我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。
查看 Sterile-filtered 级别指南 → 查看 BioReagent 级别指南 → 查看 Ready-to-use 级别指南 → 查看 for PAGE 级别指南 →