计算溶液所需的质量、体积或浓度。
Description
Storage:The storage temperature should not exceed 35°C.Keep tightly closed. Store in a cool, dry, well-ventilated area.Do not expose to ultraviolet light.High temperatures (>80°C), pressure and contamination with peroxides may result in auto-polymerization of the product.Unstable upon depletion of inhibitor.UV curable very low viscosity resin.Cures rapidly to form a glassy, high modulus material.Excellent for use in applications requiring low viscosity, high hardness, and low shrinkage stress.Good for some spray coatings requiring no volatile organic compounds (VOCS).Non-yellowing.Low oxygen inhibition.Mechanical properties after curing:Modulus*: 840 MPaStrength*: 23 MPaElongation*: 8%Pencil Hardness: 6HTack Free**: 80+*Test Resources: tensile tester, 35 mm gauge length, 1.0 mm thickness, 6.5 mm width** Cured under stated intensity. Medium pressure mercury bulb with 320-500 nm filter. Adhesion tests were conducted using a cross hatch tape test on films 0.125 mm thick on glass and PET. Material Data using ASTM D 638-02a.
Description
Storage:The storage temperature should not exceed 35°C.Keep tightly closed. Store in a cool, dry, well-ventilated area.Do not expose to ultraviolet light.High temperatures (>80°C), pressure and contamination with peroxides may result in auto-polymerization of the product.Unstable upon depletion of inhibitor.UV curable very low viscosity resin.Cures rapidly to form a glassy, high modulus material.Excellent for use in applications requiring low viscosity, high hardness, and low shrinkage stress.Good for some spray coatings requiring no volatile organic compounds (VOCS).Non-yellowing.Low oxygen inhibition.Mechanical properties after curing:Modulus*: 840 MPaStrength*: 23 MPaElongation*: 8%Pencil Hardness: 6HTack Free**: 80+*Test Resources: tensile tester, 35 mm gauge length, 1.0 mm thickness, 6.5 mm width** Cured under stated intensity. Medium pressure mercury bulb with 320-500 nm filter. Adhesion tests were conducted using a cross hatch tape test on films 0.125 mm thick on glass and PET. Material Data using ASTM D 638-02a.