计算溶液所需的质量、体积或浓度。
Description
Storage:The storage temperature should not exceed 35°C.Keep tightly closed. Store in a cool, dry, well ventilated area.Do not expose to ultraviolet light.High temperatures (>80°C), pressure and contamination with peroxides may result in auto-polymerization of the product.Unstable upon depletion of inhibitor.Cures rapidly to form a glassy high modulus, optically clear material.Excellent for use in protective coatings, optical and outdoor applications.Non yellowing.Low oxygen inhibition.Mechanical Properties after curing:Modulus*: 1140 MPaStrength*: 35 MPaElongation*: 5%Pencil Hardenss: 6HTack Free**: 10*Test Resources: tensile tester, 35 mm gauge length, 1.0 mm thickness, 6.5 mm width.** Cured under stated intensity. Medium pressure mercury bulb with 320-500 nm filter. Adhesion tests were conducted using a cross hatch tape test on films 0.125 mm thick on glass and PET. Material data using ASTM D 638-02a.
Description
Storage:The storage temperature should not exceed 35°C.Keep tightly closed. Store in a cool, dry, well ventilated area.Do not expose to ultraviolet light.High temperatures (>80°C), pressure and contamination with peroxides may result in auto-polymerization of the product.Unstable upon depletion of inhibitor.Cures rapidly to form a glassy high modulus, optically clear material.Excellent for use in protective coatings, optical and outdoor applications.Non yellowing.Low oxygen inhibition.Mechanical Properties after curing:Modulus*: 1140 MPaStrength*: 35 MPaElongation*: 5%Pencil Hardenss: 6HTack Free**: 10*Test Resources: tensile tester, 35 mm gauge length, 1.0 mm thickness, 6.5 mm width.** Cured under stated intensity. Medium pressure mercury bulb with 320-500 nm filter. Adhesion tests were conducted using a cross hatch tape test on films 0.125 mm thick on glass and PET. Material data using ASTM D 638-02a.